Why Doesn't Belkin Adapter Connect To Internet
Jul 5, 2011
My Belkin wireless usb network adapter isn't connecting to the internet. The router and everything is fine as other computers in the house are working. It's just one desktop pc that isn't connecting.Our internet was running slower than it should and that was because we had too many wires and so in order to speed it up we decided to use a wireless connection instead of an ethernet cable.The problem seems to be that the adapter just isn't connecting. The little icon showing the status of the connection keeps going back and forth from no connection to attempting to connect.
View 14 Replies
ADVERTISEMENT
Apr 3, 2013
I recently bough a belkin router (Share N300) but it just wont connect to the internet.My setup is as follows:ADSL -> Modem -> Router -> PCThe internet works fine when I connect it directly to my PC (via the modem), and other PCs too.So no issue of MAC address lockdown.I've tried connecting through static mode with the data from ipconfig /all, but it still doesn't work.I've even installed DD WRT and Tomato to no avail.
View 2 Replies
View Related
Apr 5, 2012
After my last usb wireless adaptor went faulty after a few years of use I needed a new one for my home PC.Since I had never had problems with my previous Belkin adaptor I opted for another one. model number F6D4050 V2.I am having no luck at all connecting to my home network with my PC, the laptops and games consoles at home have no trouble at all. windows troubleshooter brings up the fault: 'wireless network connection 2' doesn't have a valid IP configuration.
View 10 Replies
View Related
Jan 30, 2011
Everytime i plug the cable into my PC it doesn't detect it and the helper says to insert an ethernet cable.When I go to network sharing centre and check my connections it says network adaptor unplugged.im using wireless at the moment.My pc is a packard bell ipower x9810. it was windows vista but i upgraded to windows 7, i checked the packard bell website and can't find any networking adaptors. I have also checked device manager and it says - Belkin N+ wireless USB adapter #4 NVIDIA nForce 10/100/1000 Mbps Ethernet. there is no yellow exclamation mark.
View 17 Replies
View Related
Nov 2, 2012
Wireless Adapter D600 USB needs to connect to the internet to finish installing... Problem is, I bought it because I can't get my ethernet port to work on my desktop. It worked find in Windows 7, but Windows 8 needs more information.
View 1 Replies
View Related
Apr 22, 2012
I just bought a Belkin N600 USB adapter for my desktop PC. However, after I installed it I only get a "limited connection". I'm a pc novice I've tried everything I can think of. My router is a Verizon Fios Actiontec.
View 1 Replies
View Related
Mar 1, 2013
my netgear wireless router cannot see my n300 usb adapter. it shows as working in my device manager, but the netgear router says wireless not connected. when installing the adapter it said that windows has an icon to the left of the taskbar that i can click on and ask to join a network, which it didnt. it just showed network and an option to open network and sharing center, which i did. there were no wireless networks that showed available for me to log into with the adapter
View 4 Replies
View Related
Dec 29, 2012
I have recently purchased a Belkin n300 wireless N router. The problem is, I have to reboot the thing numerous times throughout the day to allow a client to connect to it via wireless. One client will be connected and then drop, or a client will be connected, and I cannot connect another device. I also had an issue with streaming over wireless for netflix on my devices and the only way I could get it to work was to turn off the firewall, what the hek.... This is crap. I knew I should not have bought a belkin router again. Had one years ago and it constantly gave me issues. Had my Linksys Wrt54G for years with no problems until it finally crapped out. Anyways, my firmware version is the latest version according o the website.
View 6 Replies
View Related
Mar 9, 2013
I have a TP-Link TL-WN723 USB WiFi adapter attached to my laptop, which runs WinXP Service Pack 3. It successfully detdcts the WiFi provided by my Edimax BR62-04Wg router, but when I try to connect, it cannot obtain an IP address and cannot connect to the network.
- The very same WiFi adapter can connect to other routers without any problem
- Any other device can connect to the very same network provided by my router without any problem
- Using the WiFi adapter with other computers does not work
Thus, it seems that the problem is somewhere between this specific router and WiFi adapter. Here is an interesting detail though:If I try connecting to my WiFi while a LAN cable from the router is plugged into my computer, the wireless connection establishes too. Even if I later unplug the LAN cable, the wireless connection continues to work. But it won't establish the connection without the cable plugged in.Here's what I've already know/tried:
- Rebooting the PC
- Re-installing the WiFi adapter's drivers
- All drivers and firmwares are the newest available
- Re-starting and reconfiguring the router
- Using the Windows client for wireless networking and the client included on the WiFi adapter's CD
- Changing the router's connection type to any available option: Access Point, Station Ad-hoc, AP Bridge WDS
None of these had any effect except for one:
- When I changed the router's connection type to Station Ad-hoc, I could connect wirelessly even without the LAN cable plugged in, and I had Internet access. However, in this case, other devices, such as smartphones could not detect the WiFi connection.
View 3 Replies
View Related
Mar 2, 2011
I'am having problems when connecting to the internet. I'am running Win7 64-bit and i have Belkin USB wireless adapter( Belkin surf N150) When i first bought the adapter it didnt connect to internet, so i though it is not working and i got it replaced. I got the same problem with the second one as well, and then i have changed the wireless mode on the device manager from: IEEE 802.11b/g/n to: IEEE 802.11b and eventually i have connected to internet without any errors, but in this mode the internet is unbelievably slow which is very slow when compared to another wireless mode where i have changed it from. So my question is why i can't connect to internet IEEE 802.11b/g/n in this mode? The weird thing is that some times it connects to internet with no error and dissconnects again in a short while. Also when the windows tries to repair it, i get this report:
Windows Network Diagnostics Publisher details
Issues found
Problem with wireless adapter or access pointProblem with wireless adapter or access point Not fixed
Refer to Windows Help and Support for more information about wireless connectivity problems Failed
Reset the wireless adapter Completed
Investigate router or access point issues Completed
[code]....
View 17 Replies
View Related
Nov 13, 2012
F9L1101 N600 DB Wireless Dual-Band USB Adapter : recognizing and connecting to wireless network but unable to use internet. Changed static IP adress, etc but no luck. Followed instructions on support email response:
Windows XP:
Start->Control Panel->Network Connections(classic view)->Right click on Local Area connection(wired)/Wireless network connection(wireless)->Properties->Select Internet Protocol(TCP/IP)->Properties->Under General tab, choose "Use the following IP address" and type the IP address, Subnet mask and Default Gateway, DNS and press OK.
Type in the ip address 192.168.2.20
Enter the subnet mask as 255.255.255.0
Enter the default gate way as 192.168.2.1
Type in the primary DNS as 4.2.2.2
Type the alternate DNS as 8.8.8.8
Am currently unstalling and reinstalling. The network is WEP with a long alpha numeric key, which was accepted and network detected and connected. No internet. No internet. No internet.
View 3 Replies
View Related
Dec 28, 2012
My desktop doesnt connect to internet, but my internet works fine wid wi-fi systems like mobiles and tabs. IE/Chrome/Firefox all have the same prob. But when I remove the ethernet connection, shut down and then start my system and then connect the lan, all the 3 browsers work fine. I'm noticing this issue after I've uninstalled TuneUP Utilities trial pack and/or after I've installed LABTEC wireless Keyboard and mouse. Later on I've uninstalled the LABTEC software, but still its no use.
View 3 Replies
View Related
Apr 2, 2012
On my laptop, the wireless will show, "currently connected to my router", yet it says below, "there is no internet connection"...I have already replaced my router and modem recently..still no change...I'll reset the router and i'll have internet access for 30 minutes and it will log me off.
View 2 Replies
View Related
Mar 3, 2011
I have had this router and everything was working, I have moved and after getting my internet activated I proceeded to set-up a network in my new place. The setup process went smooth but even though I can connect to my network, I cant connect to the internet. I know my internet works as a direct connection through the modem works. I updated the firmware, I tried doing a factory reset on the router, basically did all the basic stuff that one would do if they had router troubles.
View 14 Replies
View Related
Feb 27, 2012
My DIR-601 doesn't connect to the internet. I connected it through a cable to the modem, and the router to the computer. It worked for an hour, I could even set up the wireless and it worked. Since, I cannot connect the comupter to the Internet through the router, even using the cables connection. I connect to the router, but the router does not connect to the Internet. The modem works properly.
View 1 Replies
View Related
Nov 14, 2011
I have a usb adapter that i used to use with another computer to get internet access. now i dont have that computer but when i plug the usb adapter into my new computer it can get internet access. HOWEVER, the new computer loses connection a lot and is mighty slow sometimes. It is not that far away from the other computer. on different levels but close. I think i might have installed it wrong. what is the correct way to connect to the internet using a usb adapter to connect with a computer that gets internet connection directly? or how do i make this connection stronger/better?
View 3 Replies
View Related
May 6, 2011
My desktop doesn't connect to the router and when i troubleshoot, it tells me that the ethernet cable is not plugges into the computer. But the ethernet cable is already plugged in. My two laptops have no problems connecting to the internet.
View 7 Replies
View Related
Apr 12, 2013
I bought this new router, I've followed the CD and install everthing. My computer can connect to the router, but it doesn't connect to the internet.
View 1 Replies
View Related
Mar 14, 2012
I have an very old laptop that I wanted to make use of for guests. It is Windows ME but does not even have an ethernet port, it was used for only dial up. I thought I could make it wireless to my router using the Linksys Wireless USB adapter WUSB54GC USB Stick. It has installed with no problem and connects to the router with no problem but it will not connect to the internet. It just says internet cannot be found. I have googled and googled and googled and it seems a lot of people have had this problem but all the answers are not for Windows ME and a laptop that does not have wireless connections, so I am stuck.
View 7 Replies
View Related
Nov 11, 2011
Today, suddenly my internet went down so I checked up on it and I found out that something might be wrong with my router. I can connect just fine if I connect my computer with the modem directly but when I plug the modem to the router, I can connect to the router but it doesn't give me any internet.
View 9 Replies
View Related
Jan 4, 2012
I have been having difficulty connecting to the internet at my new place, I'm starting to think that the network card I recently bought (D-Link DWA-552 XtremeN Desktop Adapter) might have a problem, but I am not sure. I am currently using my landlord's internet, so I don't have access to the router to turn it on and off, which Windows suggests doing constantly, but I don't think that's the problem because I have internet on all my other wireless devices (Phone, PS3, Xbox).I am able to see the router most times and connect to it, but I am unable to connect to the internet, the networking image in the bottom corner has a yellow warning sign. Also, after a certain amount of time, the wireless card is unable to detect any wireless signal, the networking image in the bottom corner has a red X through it. I disabled all networking interfaces besides the wireless card because of an error message that I thought may have been caused by it: "This computer is continuously switching between two or more wireless access points or routers", but disabling the other interfaces did nothing and the message still appears after troubleshooting.
View 1 Replies
View Related
Jan 5, 2011
My computer doesn't want to connect to the internet via ethernet, however it will connect via wireless to the same network. Other computers on this network connect to the internet just fine.
View 3 Replies
View Related
Jan 23, 2012
We recently switched from ATT to Comcast in our house so we needed a new router since 2wire won't work with the Comcast modem. So we installed the router - no problems. Its been working great for about 3 weeks now, but yesterday when I tried to get on, it said the router had "no internet access" and I haven't been able to get it to work since.I have restarted the router, the modem, and my computer several times and reset the router to factory settings to no avail. I thought it might be a problem with comcast (maybe the storms knocked something out) but the modem is working fine; TV and phones still work and all of the lights on the modem box (power, DS, US, Online, ect.) are still on. I called comcast and they said they have registered no issues in the area.Right now I'm connected to the internet through the modem. I've tried everything I can think of[CODE]
View 10 Replies
View Related
Aug 14, 2012
I have unplugged everything and restarted everything in the correct order. I have connectivity to the modem if I plug ethernet cable into cable modem, but cannot get any connectivity if I plug into the wireless router and then into the cable modem. I am using a desktop computer and only use the wireless modem for my phones wi-fi.
View 2 Replies
View Related
Feb 25, 2012
I have a Ralink 802.11b/9 54 bps wireless USB adapter.I was able to install the drivers and get it so the computer sees the adapter and the adapter is able to see and connect to my wireless. It will not however connect to the internet. (I am using a HPpav a1113w with windows XP and I have a Dlink wireless router)
View 1 Replies
View Related
Jan 5, 2012
I've tried so many settings I cant even remember where i left off but one general question, troubleshoot to the next step with the wga54g; sometimes the connection shows 'acquring address' but never connects. I've fiddled with things so that i can get the GA to acquire an address but the internet comes through. Also the GA never shows up on the client table. So is the fact that i can get a network address a good thing or doesn't that necessarily mean i'm 'connected' to the network. Its frustrating to have the G light lite up yet no connection also at one point I did get the GA to show up in the client table when it was directly connected to the linksys 1200 but when i walked into the room and attached it to the PC, no dice I've turned off all firewalls temporarily and the 1200 is set on wpa/wp2 mixed. when i tried setting it just to wpa i got a warning then I lost my internet. I had to reinstall the 1200 again.
View 1 Replies
View Related
Jul 19, 2012
I received the recovery CD's from Dell and reinstalled the operating system, But now I can't connect to the Internet and get the message that there is no network adapter. What do I do now? Do I need to use the Driver CD and reinstall also? [code]
View 2 Replies
View Related
Sep 19, 2011
I'm running Vista on my Desktop, and the router is a Gigaset SE567/8 Series. Whenever I turn my computer on, it will connect to the network, but not to the internet. I get the caution symbol in the task bar with the network icon, and it show the "identifying ( mySSID )". I have to unplug the router for 30 seconds in order to make it work correctly. This router was just installed by my ISP the other day and its been acting this way since then.
View 1 Replies
View Related
Jul 9, 2011
I have a Motorola Docis Surfboard model Model SB6120 and can connect to the internet with the ethernet cable directly onto the labtop but if I connect it to the E4200 router the range is there but the internet connection is not. This happened 2 days ago and can't get the router to work.
View 4 Replies
View Related
Jan 14, 2013
I basically plugged it into my Verizon Fios router and downloaded the Cisco Connect application (since I have a macbook air which has no CD drive)
It sets up fine, I change my router name.... BUT at the end it says there is an issue of some sort. The Cisco Connect application reloads saying "repairing connection" but then does not repair it.
Not sure where to go from here. I also logged in to 192.168.1.1 but of course I do not know where to go from here. I also reset the router trying to start from new, but no dice.
View 9 Replies
View Related
Jun 19, 2012
My router was working till date. Due to some reason, I disconnected the internet cable and connected it. After that it does not connect to internet.Based on the forum I accessed 192.168.1.1, it displays the administration page. I have reset to factory settings and switched off the router for a while and turned it
View 9 Replies
View Related
Oct 23, 2011
I don't really know much about computers, but I have a Dell inspiron 1545 and it fell off my bed by accident a while back so now I notice glitches here and there, but recently it just doesn't connect to Internet anymore, and I know my wifi is fine because I'm using my iPad right now to write this. When I go to Network and Sharing Center it shows a drawing of my PC and then a green line to "Identifying" and a line with an X to Internet. It also says my access is local only.
View 3 Replies
View Related
Feb 2, 2012
I just installed a band new copy of xp on my system and I cannot connect to the internet! I'm connected via Ethernet to my Belkin n600 HD and whenever I go try to follow the steps via Microsoft [Go into Network Connections > Create a New Connection > Connect to the Internet > Set up my connection manually > Connect using a broadband connection that requires a user name and password] It just brings up the old school dial up vpn style thing and never connects to the net. Secondly I tried to install the Belkin software but it just has errors trying to establish a connection with it. The Internet is working fine, I have 5 laptops connected to it.
View 3 Replies
View Related
