D-Link DWA-552 New Wireless Card Doesn't Connect To Internet
Jan 4, 2012
I have been having difficulty connecting to the internet at my new place, I'm starting to think that the network card I recently bought (D-Link DWA-552 XtremeN Desktop Adapter) might have a problem, but I am not sure. I am currently using my landlord's internet, so I don't have access to the router to turn it on and off, which Windows suggests doing constantly, but I don't think that's the problem because I have internet on all my other wireless devices (Phone, PS3, Xbox).I am able to see the router most times and connect to it, but I am unable to connect to the internet, the networking image in the bottom corner has a yellow warning sign. Also, after a certain amount of time, the wireless card is unable to detect any wireless signal, the networking image in the bottom corner has a red X through it. I disabled all networking interfaces besides the wireless card because of an error message that I thought may have been caused by it: "This computer is continuously switching between two or more wireless access points or routers", but disabling the other interfaces did nothing and the message still appears after troubleshooting.
View 1 Replies
ADVERTISEMENT
Mar 3, 2011
I have had this router and everything was working, I have moved and after getting my internet activated I proceeded to set-up a network in my new place. The setup process went smooth but even though I can connect to my network, I cant connect to the internet. I know my internet works as a direct connection through the modem works. I updated the firmware, I tried doing a factory reset on the router, basically did all the basic stuff that one would do if they had router troubles.
View 14 Replies
View Related
Feb 27, 2012
My DIR-601 doesn't connect to the internet. I connected it through a cable to the modem, and the router to the computer. It worked for an hour, I could even set up the wireless and it worked. Since, I cannot connect the comupter to the Internet through the router, even using the cables connection. I connect to the router, but the router does not connect to the Internet. The modem works properly.
View 1 Replies
View Related
Apr 12, 2013
I bought this new router, I've followed the CD and install everthing. My computer can connect to the router, but it doesn't connect to the internet.
View 1 Replies
View Related
Feb 29, 2012
Verizon FIOS fiber optic DSL router 100meg working with other desk top and two other computers. The IP address is correct and signal is real strong, excelent according to PC. I put in the security KEY and it connects and says it's ok but no internet.I've tried every thing. When I plug in the ethernet cable everything works fine on line. With Belkin you can let windows start the wireless input or Belkin. I tried both. No luck. I'm sending you this over my ethernet cable. Need Tech support.I have another desktop with Belkin wireless card and it is working fine . I did try to troubleshoot useing it and lost internet on it and had to do a restore to get it back. So afraid to mess with it.
View 4 Replies
View Related
Aug 9, 2011
i have photoh plus broadband,but i want to use internet from sim card ,so what should i do?
View 1 Replies
View Related
Aug 12, 2011
I just purchased a Zonet wireless PCI adapter and I cannot connect to the internet, for my wireless connection it says I have limited to no connection, with a little yellow triangle with an exclamation point, and for the local area plug it says a cable is unplugged. I cant get in touch with the manufacturer either.
View 3 Replies
View Related
Apr 2, 2012
On my laptop, the wireless will show, "currently connected to my router", yet it says below, "there is no internet connection"...I have already replaced my router and modem recently..still no change...I'll reset the router and i'll have internet access for 30 minutes and it will log me off.
View 2 Replies
View Related
Sep 7, 2011
I am trying to connect to the internet with a linksys wmp11 wireless running windows xp. I canconnect to the net work by I cannot connect to the internet. When I am looking at the properteis for the card I see the the card has dhcp inabled and I cannot disable.
View 4 Replies
View Related
Feb 5, 2012
Moved my dell dimension 8400 to another location. Now need to access internet by wireless. My 8400 doesn't seem to have wireless card.
View 1 Replies
View Related
Jan 5, 2011
My computer doesn't want to connect to the internet via ethernet, however it will connect via wireless to the same network. Other computers on this network connect to the internet just fine.
View 3 Replies
View Related
Aug 14, 2012
My PC has a wieless card in it and last night the internet went off and then I wouldn't find my router at all, just everyone elses.I tried resetting the router, unplugging it an leaving it for a while, then resetting my PC. Tried unplugging the wireless card and plugging back in. Made sure I have latest drivers. Disabled and enable the card.I then tried plugging in an external belkin adapter in the usb and that worked.There are 2 other PC's in the house and they are both connecting to the internet fine. But I tested an old laptop we have and that didn't pick up the router either.I went on the pc in the other room next to mine and tried changing the channel it was on from 12 to 5 and it actually worked now my pc can find my router (???)But we've been having alot of issues lately with bad internet on certain channels etc.I don't really understand why channel 5 would work but channel 12 doesnt? We are experiencing more latency on that channel too.
View 1 Replies
View Related
Jul 9, 2011
I have a Motorola Docis Surfboard model Model SB6120 and can connect to the internet with the ethernet cable directly onto the labtop but if I connect it to the E4200 router the range is there but the internet connection is not. This happened 2 days ago and can't get the router to work.
View 4 Replies
View Related
Jan 14, 2013
I basically plugged it into my Verizon Fios router and downloaded the Cisco Connect application (since I have a macbook air which has no CD drive)
It sets up fine, I change my router name.... BUT at the end it says there is an issue of some sort. The Cisco Connect application reloads saying "repairing connection" but then does not repair it.
Not sure where to go from here. I also logged in to 192.168.1.1 but of course I do not know where to go from here. I also reset the router trying to start from new, but no dice.
View 9 Replies
View Related
Jun 19, 2012
My router was working till date. Due to some reason, I disconnected the internet cable and connected it. After that it does not connect to internet.Based on the forum I accessed 192.168.1.1, it displays the administration page. I have reset to factory settings and switched off the router for a while and turned it
View 9 Replies
View Related
Aug 31, 2009
I can't connect to the internet using wireless. Can access the internet just fine with my cable. All I see is the red x and its not able to detect any networks. I reinstalled drivers, it works fine for a second, and then dies out again.
View 2 Replies
View Related
Jul 11, 2012
Im trying to bridge my zyxel eq660r-f1 dsl modem so that i can resolve the nat issue im having in my home network. Only problem is that everytime I bridge the modem and hook my E4200 up, I cannot connect to the internet. If i connect my laptop directly to the modem, I do get internet but not through the router itself.
View 8 Replies
View Related
Jan 1, 2013
I have a Belkin usb adapter to pick up my wireless internet. problem is when i choose my network to connect to it constantly says "acquring network address". But as soon as i plug in an ethernet cable from the router the wireless starts working and i just unplug the ethernet cble. So why does my wireelss card depend on my ethernet conenction?
View 7 Replies
View Related
Feb 25, 2008
Dell 8400 - Vista - TWO 1GB 4200/&NBST 533MHz and TWO 512 5300 667MHz
If I install one matched pair, the wireless network is found and will connect to the network. If I install all four, the network is not found and the wireless will not connect. The network card is Netgear G PCI adapter 54MBTS 2.4GHz.
View 19 Replies
View Related
May 16, 2012
My laptop has Intel(R) Centrino(R) Wireless-N 1030 internet card but the computer can not connect to the modem properly, the speed is always not the speed that I purchased
View 1 Replies
View Related
Aug 12, 2012
My WRT54G2 v1 does not automatically connect to the internet on computer start-up. The computer will say "Connected, No Internet Access" In order to fix it I have to unplug the router and then plug it back in. This happens to any computer that tries to get online from a cold start-up. The router must always be unplugged, then plugged back in, then it will have internet access (and will generally maintain it throughout the session and even if the computer is restarted, i.e. warm boot). I have downloaded the latest firmware uprade.
View 9 Replies
View Related
Aug 8, 2011
My dlink aircard wont connect to wpa psk networks.Why is that.
View 5 Replies
View Related
Mar 1, 2013
I have the firmware 2.10NA. In my home we have about 4 laptops and 4 smartphones connecting to this router wirelessly and 3 of the laptops often lose connection for hours. We have tried unplugging the router and plugging it in again and factory reset and also resetting it through the IP address but the connection doesnt come back. Recently it has gone out for about 3 hours now. Also the wireless LED icon on the router constantly blinks is this normal? On the laptops where theres no connection it says limited connectivity. Is it possible that there is too many devices connected to the router or something. or could this be a problem with the laptops and not the router?
View 6 Replies
View Related
Dec 25, 2012
About six months ago I replaced my old router (some generic 802.11b/g router I got for free with a rebate years ago and which lasted a few years) with a Dir-601 after the old router started intermittently cutting out. Setup of the Dir-601 was straightforward enough and I have WEP enabled. Both my Macbook and my wife's Macbook can connect fine if we choose the router from the drop-down wireless network list, and the router has been consistently reliable in maintaining a connection as long as the OS is running.
HOWEVER, neither computer will remember the wi-fi network and won't auto-connect when waking up from sleep or after a restart. Our iPhone and Android smartphones remember the network just fine and auto-connect every time, zero issues. I've gone through all the typical Mac troubleshooting steps, deleting saved network connections and re-establishing new ones. Never solves the problem. We always have to go to the wireless network menu and manually select the wifi connection to connect to.
It's not the Macbooks. Firstly, both macbooks have the same issue, and they're each running different MacOS versions, so there's no version-specific issue that can be at play here. Secondly, neither macbook had this issue with any previous wifi router. Thirdly, anywhere else we take our macbooks where we've set up a wifi connection, they remember it and auto-connect without us having to manually select the network. The only network where we have to manually select the network every time is the one set up with the Dir-601. In fact, we're at my inlaws for the holidays and our Macbooks have been auto-connecting to their router each and every time.Is there a setting I'm not seeing on the Dir-601 admin page?
View 3 Replies
View Related
Mar 10, 2012
I haven't installed anything new lately, nothing that would affect the wireless, but my wireless suddenly stopped working. My wireless has been working successfully for the past 2 years no problems till now. I have a Dell Latitude E6410 my computer is running Windows 7 32bit. When I open up the DW WLAN Card Utility it says "There are currently no wireless adapters available and enabled. Please enable any available wireless adapters before accessing this configuration utility. I tried reinstalling drivers for the wireless but my computer says "no compatible hardware found".
Also the under the wireless adapters section of Device Manager there isn't an adapter for wireless, but there is an unknown device.
Here's a View at my Device Manager [URL]
I've tried to use computer restart magic but no luck there.
Also, my computer is running on a university network. My roommate's wireless is working fine. Also I've already system restored to a point where I know it was working, no luck...
View 2 Replies
View Related
Dec 18, 2012
Region : Portugal
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Optimus Kanguru (LTE) www.kanguru.pt
I have a modem huawei E392u-12 from the service provider optimus kanguru, url..., and i would like to use my usb modem with this router i have. the router identify the modem but does not conect. i have seen that the bin files available are just for vodafone and TMN, what can i do so i dont have to buy another equipment.
View 4 Replies
View Related
May 10, 2013
Region : Others
Model : TL-MR3040
Firmware Version: 3.14.4 Build 121017 Rel.62268n
I have purchased TL-MR3040 especial for share my 3G account . I have connect it by ethernet port and made setups and it is in 3g/4g only mode. In system checks my modem indicated as " Identified" the modem is a Huawei E160E . My notebook and tablet connects by wireless connection to TL-MR3040 but the router does not dial ISP number *99# . The led on usb modem continues flashing. the 3G modem works perfectly with my notebook and tablet and I use the same parameters for TL-MR3040 with tablet. But most of the parameters don't exist on setup pages of TL-MR3040 . [code]
View 6 Replies
View Related
Dec 11, 2011
I just got my DIR 825. It had 2.02NA Firmware in it. It had a few options that I wanted to use but didn't work. So I thought I would update firmware. I follow the instruction from dlink to install firmware. So I loaded 2.03 and noticed internet connection not working. So then I loaded 2.05 part1 and part2. Still could get internet connection to work but the reason to upgrade the option I wanted worked. So then I loaded 2.06 and still same result. No internet connection. So then I loaded the original firmware back in and internet connection works. Why doesn't the internet work on the other firmware updates. I got the updates from dlink website. I would like to update firmware
View 9 Replies
View Related
Dec 28, 2012
My desktop doesnt connect to internet, but my internet works fine wid wi-fi systems like mobiles and tabs. IE/Chrome/Firefox all have the same prob. But when I remove the ethernet connection, shut down and then start my system and then connect the lan, all the 3 browsers work fine. I'm noticing this issue after I've uninstalled TuneUP Utilities trial pack and/or after I've installed LABTEC wireless Keyboard and mouse. Later on I've uninstalled the LABTEC software, but still its no use.
View 3 Replies
View Related
Sep 20, 2011
I recently install xp pro and update all necessary drivers for the computer.I also plug-in another network card, this nic is working but seem browsing the web is slower than the original network card comes with the motherboard. Before both network cards show up in (my network places). Now the network card comes with the motherboard doesn't show up, only the network card connection just installed.
I check the device manager both of the network adapters are there, check both of box that say place LAN on taskbar.This could be i have find and install revised intel chipset and lastest BIOS for the pc, now the hard drive activity LED doesn't lit and the ethernet controller has issue. Note when I plug in the cable to ethernet port (one built with pc) there's show both activity light and connection light, but can't connect to the internet.
pc info:
winxp pro sp3
pentium celeron
256 mb of memory
manufacturer: gateway
View 1 Replies
View Related
Jul 5, 2011
My Belkin wireless usb network adapter isn't connecting to the internet. The router and everything is fine as other computers in the house are working. It's just one desktop pc that isn't connecting.Our internet was running slower than it should and that was because we had too many wires and so in order to speed it up we decided to use a wireless connection instead of an ethernet cable.The problem seems to be that the adapter just isn't connecting. The little icon showing the status of the connection keeps going back and forth from no connection to attempting to connect.
View 14 Replies
View Related
May 6, 2011
My desktop doesn't connect to the router and when i troubleshoot, it tells me that the ethernet cable is not plugges into the computer. But the ethernet cable is already plugged in. My two laptops have no problems connecting to the internet.
View 7 Replies
View Related
Mar 9, 2013
I have a TP-Link TL-WN723 USB WiFi adapter attached to my laptop, which runs WinXP Service Pack 3. It successfully detdcts the WiFi provided by my Edimax BR62-04Wg router, but when I try to connect, it cannot obtain an IP address and cannot connect to the network.
- The very same WiFi adapter can connect to other routers without any problem
- Any other device can connect to the very same network provided by my router without any problem
- Using the WiFi adapter with other computers does not work
Thus, it seems that the problem is somewhere between this specific router and WiFi adapter. Here is an interesting detail though:If I try connecting to my WiFi while a LAN cable from the router is plugged into my computer, the wireless connection establishes too. Even if I later unplug the LAN cable, the wireless connection continues to work. But it won't establish the connection without the cable plugged in.Here's what I've already know/tried:
- Rebooting the PC
- Re-installing the WiFi adapter's drivers
- All drivers and firmwares are the newest available
- Re-starting and reconfiguring the router
- Using the Windows client for wireless networking and the client included on the WiFi adapter's CD
- Changing the router's connection type to any available option: Access Point, Station Ad-hoc, AP Bridge WDS
None of these had any effect except for one:
- When I changed the router's connection type to Station Ad-hoc, I could connect wirelessly even without the LAN cable plugged in, and I had Internet access. However, in this case, other devices, such as smartphones could not detect the WiFi connection.
View 3 Replies
View Related
