Protocols / Routing :: D-link Air-card Won't Connect To Wpa Psk Networks

Aug 8, 2011

My dlink aircard wont connect to wpa psk networks.Why is that.

View 5 Replies


ADVERTISEMENT

Protocols / Routing :: Enable Two Networks To Logon To Same Domain

Sep 13, 2011

I have 2 separate networks. One is a DSL circuit, the other is a T1. How do I enable the two networks to logon to the same domain, but use each of their own gateways for internet access?

View 5 Replies View Related

Protocols / Routing :: Cannot Connect Wireless Tp-Link Adsl2+ N300 Modem To The Internet

May 13, 2012

I bought yesterday a wireless modem/router and Tp-Link Adsl2+ N300 Modem Router Td-W8960n.I have 2 laptop computers at home.The first issue I have is that with one of the laptops (quite old - Acer Aspire 2420-2579 with Windows Vista Basic Service Pack 1) I can not connect (wireless) to the internet. It says local access only. However in other countries (IM in NZ) it does connect to internet. It does work when I use an Ethernet cable between my router and the laptop. The second issue is with my other laptop. A HP Pavillion DV-4 windows vista home premium service pack 2. I manage to get wireless access to the internet but every couple of minutes the connections drops and starts again by itself�. After 1-2 min approx�. it is getting pretty annoying!I don�t think it is the routher as I also have an XBOX 360 connectet to the internet usign the same device and works absolutely fine!

View 6 Replies View Related

Protocols / Routing :: D-Link DIR-827 Router Dropping Signal

Jan 17, 2012

I have D-Link Amplifi N+600 Dual Band wireless router (Model: DIR-827) that was purchased a couple of months ago. I live in a house with a bunch of other university students so I would estimate we have about 18 devices that connect to the router such as laptops, mobile phones, and gaming systems. Every few hours our wireless router will just stop working and drop everyone's connection including the connection to the wired Ethernet ports. The light which is normally green on the front of the router turns yellow and will stay that way until the router is reset. The network still shows up on all the devices with full signal bars but no access.

View 1 Replies View Related

Protocols / Routing :: Port Forwarding TP-Link TD-W8970?

Jan 19, 2013

Router Model: TP-Link TD-W8970 port forwarding my modem/router. I previously was able to successfully port forward a Valve Source Server and had other people join on the internet so...(It worked) I recently reformatted and since have had issues.

I'm currently setup with PPPOA and I've added various ports for different programs (a Teamspeak 3 Server[9987] and Minecraft[25565]) either dont work. I used a port checker program and they either say the port is closed or the connection is refused...I've tried using a static IP but I think i configured it wrong becuase i was barely able to get the internet while using it, either way..the ports didn't open.

DCHP is disabled (Tried enabling, didn't work) The above ports are enabled with Windows firewall (inbound+outbound) and Im not using any Anti-virus software to block the ports. Windows 7 64bit, fresh format and ports that wont go through.

View 4 Replies View Related

Protocols / Routing :: D-link Router DIR-600 Disconnects Every Few Hours?

May 26, 2012

I have my D-link DIR 600 and I never had problems with it until now. For the past three weeks, my router keeps on disconnecting my Desktop P.C. from which the main internet cable is connected. Whenever it happens, I try connecting my Netbook over a WiFi connection using the same router; and even though my desktop can not connect to the internet, my netbook still can. Apparently when it happens, the [3] (the 4th light in the image) light goes off, and I have to restart my Desktop P.C. for it to turn on again and to use the internet again.

View 1 Replies View Related

Protocols / Routing :: D-Link DSLG604T Pings But No Internet

Aug 11, 2011

I have a d-link dslg604t, i tried to do the frimware upgrade and it froze in the process. Now the internet doesn't work at all. I have uninstalled the drivers, reset the modem and it indicates the modem is working as in i have the two monitors and the blue flashing light between them shown, also all the network settings are there. DHCP is assigned automatically etc etc. I can ping the modem but when i try to connect to the internet i get "detecting proxy server", "internet explorer cannot display the page". "FTP (passive)- Error 12007 connecting to ftp microsoft.com

View 1 Replies View Related

Protocols / Routing :: Connect Two Net On Same Lan With Two Gateways

Apr 28, 2012

I have two different networks on same LAN.One net has public 2xx.x.x.x IPs (some on DMZ, they are servers with their own internal firewalling) and goes through a GBeth switch to a Cisco 25xx router for accessing HDSL modem with several HDSL trunks and then Internet. That router is configured to let external IPs access only DMZ IPs, of course.The other net has 192.168.x.x IPs and goes through another GBeth switch to a DLink router to access ADSL. Mainly for download traffic at a low flat cost.I would like to have a way to let the 192.x.x.x machines access the servers on the DMZ of the 2xx.x.x.x net without going outside the physical LAN. The servers host mail services and so sending heavy attached documents needs a hi-speed LAN connection and certainly not the ADSL upload capability. Not to say about servers web contents maintenance.

View 1 Replies View Related

Protocols / Routing :: DIR-620 - Cannot Connect Laptop

Nov 3, 2012

I have a problem, i have a DIR-620 wireless router, i can connect to wifi my both ipad and iphone but i cannot connect my laptop, even cannot access the admin page for settings, cz it seems my laptop cannot see my my network...

View 1 Replies View Related

Protocols / Routing :: Cannot Connect Using Real VNC

Feb 4, 2012

I am using RealVNC, have the Viewer and Server installed on three systems on my home network. I have a laptop which I am trying to use to connect to either of my two PC's, but cannot get them connected.With that being said I did have some luck with RealVNC as I have the 5900 and other ports forwarded and was able to connect with my Android tablet and Android Phone to the my two PC's and laptop with no problems....well kind of. I did have issues with this at first till I figured out I had to use a 142.*.*.* ip address because my network ip adresses were behind a NAT IP.Now back to the connecting my laptop to my two PC's issue.I have tried using the 142.*.*.* ip address and I have tried using my network ip 192.*.*.* to no avail. I just can't seem to connect.

View 5 Replies View Related

Protocols / Routing :: How To Play Games Network By Use Wireless TP-LINK

Oct 14, 2012

How to play games network by use wireless TP-LINK I have 2 laptops and one Desktop I want to play games at home, but without the use of the Internet.

View 1 Replies View Related

Protocols / Routing :: Can't Get Access To Router After Changing DSl Up-link To Ethernet

Jun 15, 2011

I recently bought a tenda w548d Version 2.0 Adsl2+ Modem router. it worked fine with its default settings and wired connection was ok when i chose DSL uplink while installing its driver from CD. But it couldn't connect wireless. There were strong signals but connected computer couldn't get access to the internet. so i tried using ethernet uplink instead of DSL uplink while reinstalling the software Since then the light of ADSL never lights, even it never blinks. now the software on the cd can connect to the router. i cannot access its settings using IP address in browser, the page wouldn't load. I am so worried. Can i revert the setting back to dsl uplink?I can connect to the internet very smoothly using my old router so you can't blame my phone line or lan wire. I have tried reset the new router many times but still the ADSL light never lights up. And the ADSL light is ok because when i turn the router on, it lights with all the others.

View 2 Replies View Related

Protocols / Routing :: Why Can't Connect To The Internet Right Now Using IPv6

Feb 16, 2011

The whole thing about IPv6 has been out for what is probably a couple of years now. But I find it very odd how even my newest modem/router can't even support it yet. Why on earth are manufacturers such as Netgear holding back so much on making their products IPv6 compatible? The IANA has just about given out what is left of the addresses, and we still have time to adapt by working our way over to IPv6 as it can work simultaneously with IPv4. Companies have been given years to prepare.

Why can't I connect to the Internet right now using IPv6? Not only is my router holding me back, but will my ISP hold me back as well?

View 1 Replies View Related

Protocols / Routing :: Rover System DVR 4CH Connect To Pc?

Sep 23, 2012

I have a Rover system DVR 4CH with 4 CCTV camera's connected to it i want to view it through a computer stream it on the internet for free i dont want to use DYN web hosting because it cost money.

View 1 Replies View Related

Protocols / Routing - Changed IP And Now Can't Connect To Internet?

Apr 6, 2011

Basically, I was following instructions of how to forward a port to get higher speeds on bitcomet.After doing allsorts which I don't understand (yes, very stupid I know, but I've learned my lesson now), I restarted my computer and have since been unable to connet to the internet.

I have tried a system restore which didn't work and also searched google for hours but to no avail.When I diagnose the problem with windows,it states," "Wireless Network Connection" doesn't have a valid IP configuration.I am running Windows 7 btw.

View 5 Replies View Related

Protocols / Routing :: Unable To Connect To Internet

Mar 4, 2013

In recent days, there was an electrical fault and my computer does not automatically connect to the wireless network in the house, since then. I do not know what happened.

View 1 Replies View Related

Protocols / Routing :: Can't Connect To Default Gateway

Feb 23, 2011

I was about to portforward to be able to make an minecraft server. but i can't connect to the default gateway 192.168.1.1 so for the moment i use hamachi but i would wannt to portforward it to make it easier for others to join.

View 3 Replies View Related

Protocols / Routing :: Cannot Connect To Router Once Passcode Is Set Up

Jul 12, 2011

I set up the password through WPA-PSK, the problems come up. My laptop, HP G62-465DX and my Ipod Touch can connect by inputting the passcode but the other laptop in my family, HP G72-b60us, cannot connect to the router once the passcode is set up because the laptop claims that it is incompatible with the router when it was before. Also, my wireless printer HP Officejet 4500 wireless G510 n-z does not work when the passcode is set-up.

View 5 Replies View Related

Protocols / Routing :: Connect A Pc To A Hdtv Wirelessly?

Jan 23, 2012

how to connect a pc to a hdtv wirelessly. The tv is to be used like a monitor. I want to display a PowerPoint file. Currently there is a lan already setup in the workplace. I have looked at some pc to tv devices but am not sure if they would work. My company's TIS department wants to put a wireless card in the workstation pc but is not sure how to connect the tv as a monitor?

View 1 Replies View Related

Protocols / Routing :: D-Link 802.11g/2.4GHz Wireless Broadband Router Is Not Turning On?

Nov 18, 2012

My D-Link 802.11g/2.4GHz Wireless Broadband Router is not turning on. None of the lights turn on. I have checked all the cords, and they are all properly plugged it. My laptop can not wireless connect.Model # of D-Link Router: DI-524

View 1 Replies View Related

Protocols / Routing :: Tp-link Router Connects Using Pppoe But No Internet Over Lan Or Wifi

Jul 4, 2012

I have TP-LINK TL-WR740N router and I am trying to configure it to work with my Broadband cable over PPPOE.The router once configured show status as connected with a proper IP and DNS servers. When I use the routers inbuilt ping utility to ping Google or any other site I get a reply.But when I connect my computer to the router on the LAN port I see no internet on my computer. I am able to ping the router address but not google.I tried disabling all Firewalls and Antivirus I have but problem still the same.Also I tried connecting over WIFI but still no internet.I also called up TP-LINK helpline several time and got my router replaced. They also tried a few settings on my machine but no success.

View 1 Replies View Related

Protocols / Routing :: Using Static IP Now Wireless Printer Won't Connect?

Jan 8, 2011

For some reason, our router donwstairs was kicking one or more of our (4pc's downstairs, one occasionally upstairs) off. My son connected another router upstairs and then created a static IP for everything. It seems when he did that, our Brother 2170 wireless printer quit working. We've tried everything to get it going again and nothing works- even Brother didn't get it rectified. Earlier today, my son finally got it working, connected directly to the router to get the static IP on the printer (I guess). But when he disconnected it (hardwired) from the router, it won't work again

View 5 Replies View Related

Protocols / Routing :: Can Connect To Internet Without Settings In Modem

Mar 31, 2012

can i connect to internet without settings in modem is dat possible?

View 3 Replies View Related

Protocols / Routing :: NR2000v2 - Cannot Connect To Computer Using Public Ip

Jul 26, 2011

I have set up several types of servers on my computer (ftp, game servers, web servers, etc).

I have had a problem with people connecting to any of my servers. I know for a fact I have port forwarded correctly (I have checked 12 times, and I have never had a problem port forwarding). I know it's not my firewall, the problem persists when I completely shut it down.

I had an ftp and web server working about a week ago. No one can connect to any server, be it ftp...web...etc.

My router is a Netgear WNR2000v2

View 6 Replies View Related

Protocols / Routing :: Cannot Connect To Router Page On Browser

Jul 28, 2011

I recently am trying to get an open nat type so I can play Playstation network better. I watched a video and they told me to turn off the NAT and I did now it does not let me connect to the router page now, I can connect to the internet and stuff but I can't connect to the router page

View 19 Replies View Related

Protocols / Routing :: Acer Notebook Cannot Connect To Wifi?

May 24, 2011

I am trying to get my daughters laptop re-hooked to the wifi. Other computers and smart phones have no problems. This computer was connected but after the applesauce spill on the keyboard, and subsequent MicroCenter replacement of keyboard, we cannot get the laptop online.It is an Acer Aspire 5517 running Windows 7I have removed all profiles and created a new profile entering parameters from my laptop. I can see the wireless connection, but when I try to connect, I get "Windows was unable to connect to Greg". When I click troubleshoot, I get "Troubleshooting couldn't identify the problem".

View 2 Replies View Related

Protocols / Routing :: Connection To Media Link Wireless N Router Is Extremely Unstable

Dec 1, 2011

I have a Motorola Surfboard cable modem with a Comcast account that is supposed to get "up to 15 mps". My desktop works gloriously, but my laptops and everything else hooked up to the net through my Media link Wireless N Router either run incredibly slow, or get kicked off completely.I've already had the router replaced one.

View 19 Replies View Related

Protocols / Routing :: Trying To Connect Wirelessly To BT Home Hub Via A USB Wireless Adapter?

Mar 14, 2011

I am trying to connect wirelessly to my BT Home Hub via a USB Wireless adaptor. The homehub works perfectly and I have other laptops in the house connecting via the wireless networkHowever, this is the problem. The Wireless connection status shows as good but packets only being sent and not received. Therefore when I load Internet Explorer, I get WebPage Not availableI notice that my IP address is starts with 169 and researching forums suggests that this is the problem and it should start 192? I have tried all sorts of things but simply cannot get this resolved. If I plug the HomeHub into the laptop directly, the connection via the ethernet cable works fine.

View 6 Replies View Related

Protocols / Routing :: Can't Connect Three Computer After 4th Laptop Join Network

Jan 21, 2011

My customer has 3 computer

1- Windows xp

2- Win7

3- Apple

4 new sony laptop.

Vaio would not connect using WEP 40-bit key. Logged into Airport Extreme router with Airport setup utility for Windows from Apple. Updated firmware from 5.1.1 to 5.7. Reset Encryption from WEP to WPA/WPA2 Personal.Connected Vaio on Wifi using WPA2. Removed ethernet cable and connection was good at 54MB/s.Completed Windows Update

View 3 Replies View Related

Protocols / Routing :: WRT54GC - Getting Wireless Signal But Cannot Connect To Internet?

Mar 9, 2013

I had a power outage while online and when power resumed, I was no longer able to connect to the internet via my wireless router. My laptops (I have 2, work and personal) both receive the wireless signal from my router (a Linksys WRT54GC) but I get a 'DNS lookup failed' error message when trying to access the internet. My standard set up was Arris cable modem-->Linksys router-->Laptop but I've had to go cable modem-->Laptop via Ethernet in order to access the internet.

Both laptops are running WinXP Pro, SP3 and I ran 'ipconfig/all' on my work one, once when connected via Ethernet and once when I had my wireless connection enabled (but again, not connected to the internet). Results below.

Ipconfig/all when connected via Ethernet to cable modem:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsm03015a>ipconfig/all

[Code].....

View 19 Replies View Related

Protocols / Routing :: Connect Two Asterisk Server On A HP Pro Curve 2626 Switch

Apr 11, 2013

I am trying to connect two Asterisk Server (with DHCP server enabled on both) on a HP Pro Curve 2626 switch. Server A has IP address 192.168.2.1 and Server B has IP address 192.168.3.1. I created a two new VLAN on switch, VLAN2 for 192.168.2.0 network and VLAN3 for 192.168.3.1 network. I put the command "ip routing" on the switch. My goal is to be able to ping ip address from PC 1(VLAN2) to PC 2(VLAN3) and vice versa... I'm not sure what I am missing... By the way, there is NO ROUTER involved on this set up. I tried to Google and it says HP ProCurve 2626 is a Layer 3 switch so IP routing should be possible.

View 4 Replies View Related

Protocols / Routing :: Linksys E1000 Router Failed To Connect To Internet

Dec 14, 2011

I've got a problem with my Linksys E1000 router. When I bought it, it worked without trouble. Setup was easy and straight forward and I was able to connect all my wireless devices (2 latops, a mobile) without any problem. Then, after two months or so, I noticed the laptops were losing internet connection (or not finding the wireless network on start up). Rebooting the router seemed to work the first couple of times to restore the wireless connections, but after a few more days, the wireless network either shows up and the devices are unable to connect to it OR the wireless network does not appear in the network list. However, the wired connection to my desktop PC via ethernet cable has no issues at all. My conclusion is that these wireless routers (E1000) have a defect in the radio card.

View 6 Replies View Related

D-Link DWA-552 New Wireless Card Doesn't Connect To Internet

Jan 4, 2012

I have been having difficulty connecting to the internet at my new place, I'm starting to think that the network card I recently bought (D-Link DWA-552 XtremeN Desktop Adapter) might have a problem, but I am not sure. I am currently using my landlord's internet, so I don't have access to the router to turn it on and off, which Windows suggests doing constantly, but I don't think that's the problem because I have internet on all my other wireless devices (Phone, PS3, Xbox).I am able to see the router most times and connect to it, but I am unable to connect to the internet, the networking image in the bottom corner has a yellow warning sign. Also, after a certain amount of time, the wireless card is unable to detect any wireless signal, the networking image in the bottom corner has a red X through it. I disabled all networking interfaces besides the wireless card because of an error message that I thought may have been caused by it: "This computer is continuously switching between two or more wireless access points or routers", but disabling the other interfaces did nothing and the message still appears after troubleshooting.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved