how to connect a pc to a hdtv wirelessly. The tv is to be used like a monitor. I want to display a PowerPoint file. Currently there is a lan already setup in the workplace. I have looked at some pc to tv devices but am not sure if they would work. My company's TIS department wants to put a wireless card in the workstation pc but is not sure how to connect the tv as a monitor?
View 1 RepliesI am trying to connect wirelessly to my BT Home Hub via a USB Wireless adaptor. The homehub works perfectly and I have other laptops in the house connecting via the wireless networkHowever, this is the problem. The Wireless connection status shows as good but packets only being sent and not received. Therefore when I load Internet Explorer, I get WebPage Not availableI notice that my IP address is starts with 169 and researching forums suggests that this is the problem and it should start 192? I have tried all sorts of things but simply cannot get this resolved. If I plug the HomeHub into the laptop directly, the connection via the ethernet cable works fine.
View 6 Replies View RelatedI have this WRT350N with me for a long time. It always worked well, and for a while I didn't used it (like 1 year). Last morning, I set it up and put it to work again and it worked perfectly, but in the evening the wireless stop working. Through cable, the internet works finely.
The light does not turn on or blink anymore. The router setup says that SSID broadcast is enabled. But I can't find the network, even if I type its name and password (supposing it was in invisible mode or something like that).
So I restored the router to its normal configuration, and once again the wireless does not work. Is there something else I can do to make the wireless work again?
Is there a wireless keyboard that will connect to the LG 47LV3700 HDTV?
View 3 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Celeron(R) CPU 2.40GHz, x86 Family 15 Model 2 Stepping 9
Processor Count: 1
RAM: 1022 Mb
Graphics Card: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller, 64 Mb
Hard Drives: C: Total - 35165 MB, Free - 15519 MB;
Motherboard: Dell Computer Corp., 0F5949
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated: Yes, On-Demand Scanner: Enabled
Internet AT&T using Netgear wireless router B90-755025-15, would llke to connect to Phillips HDTV to live stream various movies as well as other entertainment. Do you have suggestions regarding device(s) to use (example Western Digital TV Live Streaming media player with built in WiFi, stream content, remote.
I have two different networks on same LAN.One net has public 2xx.x.x.x IPs (some on DMZ, they are servers with their own internal firewalling) and goes through a GBeth switch to a Cisco 25xx router for accessing HDSL modem with several HDSL trunks and then Internet. That router is configured to let external IPs access only DMZ IPs, of course.The other net has 192.168.x.x IPs and goes through another GBeth switch to a DLink router to access ADSL. Mainly for download traffic at a low flat cost.I would like to have a way to let the 192.x.x.x machines access the servers on the DMZ of the 2xx.x.x.x net without going outside the physical LAN. The servers host mail services and so sending heavy attached documents needs a hi-speed LAN connection and certainly not the ADSL upload capability. Not to say about servers web contents maintenance.
View 1 Replies View RelatedI have a problem, i have a DIR-620 wireless router, i can connect to wifi my both ipad and iphone but i cannot connect my laptop, even cannot access the admin page for settings, cz it seems my laptop cannot see my my network...
View 1 Replies View RelatedI am using RealVNC, have the Viewer and Server installed on three systems on my home network. I have a laptop which I am trying to use to connect to either of my two PC's, but cannot get them connected.With that being said I did have some luck with RealVNC as I have the 5900 and other ports forwarded and was able to connect with my Android tablet and Android Phone to the my two PC's and laptop with no problems....well kind of. I did have issues with this at first till I figured out I had to use a 142.*.*.* ip address because my network ip adresses were behind a NAT IP.Now back to the connecting my laptop to my two PC's issue.I have tried using the 142.*.*.* ip address and I have tried using my network ip 192.*.*.* to no avail. I just can't seem to connect.
View 5 Replies View RelatedThe whole thing about IPv6 has been out for what is probably a couple of years now. But I find it very odd how even my newest modem/router can't even support it yet. Why on earth are manufacturers such as Netgear holding back so much on making their products IPv6 compatible? The IANA has just about given out what is left of the addresses, and we still have time to adapt by working our way over to IPv6 as it can work simultaneously with IPv4. Companies have been given years to prepare.
Why can't I connect to the Internet right now using IPv6? Not only is my router holding me back, but will my ISP hold me back as well?
I have a Rover system DVR 4CH with 4 CCTV camera's connected to it i want to view it through a computer stream it on the internet for free i dont want to use DYN web hosting because it cost money.
View 1 Replies View RelatedBasically, I was following instructions of how to forward a port to get higher speeds on bitcomet.After doing allsorts which I don't understand (yes, very stupid I know, but I've learned my lesson now), I restarted my computer and have since been unable to connet to the internet.
I have tried a system restore which didn't work and also searched google for hours but to no avail.When I diagnose the problem with windows,it states," "Wireless Network Connection" doesn't have a valid IP configuration.I am running Windows 7 btw.
In recent days, there was an electrical fault and my computer does not automatically connect to the wireless network in the house, since then. I do not know what happened.
View 1 Replies View RelatedI was about to portforward to be able to make an minecraft server. but i can't connect to the default gateway 192.168.1.1 so for the moment i use hamachi but i would wannt to portforward it to make it easier for others to join.
View 3 Replies View RelatedI set up the password through WPA-PSK, the problems come up. My laptop, HP G62-465DX and my Ipod Touch can connect by inputting the passcode but the other laptop in my family, HP G72-b60us, cannot connect to the router once the passcode is set up because the laptop claims that it is incompatible with the router when it was before. Also, my wireless printer HP Officejet 4500 wireless G510 n-z does not work when the passcode is set-up.
View 5 Replies View RelatedFor some reason, our router donwstairs was kicking one or more of our (4pc's downstairs, one occasionally upstairs) off. My son connected another router upstairs and then created a static IP for everything. It seems when he did that, our Brother 2170 wireless printer quit working. We've tried everything to get it going again and nothing works- even Brother didn't get it rectified. Earlier today, my son finally got it working, connected directly to the router to get the static IP on the printer (I guess). But when he disconnected it (hardwired) from the router, it won't work again
View 5 Replies View Relatedcan i connect to internet without settings in modem is dat possible?
View 3 Replies View RelatedMy dlink aircard wont connect to wpa psk networks.Why is that.
View 5 Replies View RelatedI have set up several types of servers on my computer (ftp, game servers, web servers, etc).
I have had a problem with people connecting to any of my servers. I know for a fact I have port forwarded correctly (I have checked 12 times, and I have never had a problem port forwarding). I know it's not my firewall, the problem persists when I completely shut it down.
I had an ftp and web server working about a week ago. No one can connect to any server, be it ftp...web...etc.
My router is a Netgear WNR2000v2
I recently am trying to get an open nat type so I can play Playstation network better. I watched a video and they told me to turn off the NAT and I did now it does not let me connect to the router page now, I can connect to the internet and stuff but I can't connect to the router page
View 19 Replies View RelatedI am trying to get my daughters laptop re-hooked to the wifi. Other computers and smart phones have no problems. This computer was connected but after the applesauce spill on the keyboard, and subsequent MicroCenter replacement of keyboard, we cannot get the laptop online.It is an Acer Aspire 5517 running Windows 7I have removed all profiles and created a new profile entering parameters from my laptop. I can see the wireless connection, but when I try to connect, I get "Windows was unable to connect to Greg". When I click troubleshoot, I get "Troubleshooting couldn't identify the problem".
View 2 Replies View RelatedMy customer has 3 computer
1- Windows xp
2- Win7
3- Apple
4 new sony laptop.
Vaio would not connect using WEP 40-bit key. Logged into Airport Extreme router with Airport setup utility for Windows from Apple. Updated firmware from 5.1.1 to 5.7. Reset Encryption from WEP to WPA/WPA2 Personal.Connected Vaio on Wifi using WPA2. Removed ethernet cable and connection was good at 54MB/s.Completed Windows Update
I had a power outage while online and when power resumed, I was no longer able to connect to the internet via my wireless router. My laptops (I have 2, work and personal) both receive the wireless signal from my router (a Linksys WRT54GC) but I get a 'DNS lookup failed' error message when trying to access the internet. My standard set up was Arris cable modem-->Linksys router-->Laptop but I've had to go cable modem-->Laptop via Ethernet in order to access the internet.
Both laptops are running WinXP Pro, SP3 and I ran 'ipconfig/all' on my work one, once when connected via Ethernet and once when I had my wireless connection enabled (but again, not connected to the internet). Results below.
Ipconfig/all when connected via Ethernet to cable modem:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsm03015a>ipconfig/all
[Code].....
I am trying to connect two Asterisk Server (with DHCP server enabled on both) on a HP Pro Curve 2626 switch. Server A has IP address 192.168.2.1 and Server B has IP address 192.168.3.1. I created a two new VLAN on switch, VLAN2 for 192.168.2.0 network and VLAN3 for 192.168.3.1 network. I put the command "ip routing" on the switch. My goal is to be able to ping ip address from PC 1(VLAN2) to PC 2(VLAN3) and vice versa... I'm not sure what I am missing... By the way, there is NO ROUTER involved on this set up. I tried to Google and it says HP ProCurve 2626 is a Layer 3 switch so IP routing should be possible.
View 4 Replies View RelatedI've got a problem with my Linksys E1000 router. When I bought it, it worked without trouble. Setup was easy and straight forward and I was able to connect all my wireless devices (2 latops, a mobile) without any problem. Then, after two months or so, I noticed the laptops were losing internet connection (or not finding the wireless network on start up). Rebooting the router seemed to work the first couple of times to restore the wireless connections, but after a few more days, the wireless network either shows up and the devices are unable to connect to it OR the wireless network does not appear in the network list. However, the wired connection to my desktop PC via ethernet cable has no issues at all. My conclusion is that these wireless routers (E1000) have a defect in the radio card.
View 6 Replies View RelatedI bought yesterday a wireless modem/router and Tp-Link Adsl2+ N300 Modem Router Td-W8960n.I have 2 laptop computers at home.The first issue I have is that with one of the laptops (quite old - Acer Aspire 2420-2579 with Windows Vista Basic Service Pack 1) I can not connect (wireless) to the internet. It says local access only. However in other countries (IM in NZ) it does connect to internet. It does work when I use an Ethernet cable between my router and the laptop. The second issue is with my other laptop. A HP Pavillion DV-4 windows vista home premium service pack 2. I manage to get wireless access to the internet but every couple of minutes the connections drops and starts again by itself�. After 1-2 min approx�. it is getting pretty annoying!I don�t think it is the routher as I also have an XBOX 360 connectet to the internet usign the same device and works absolutely fine!
View 6 Replies View RelatedBasically, I want to watch Hulu and other internet only entertainment, but I want to view it on my HDTV.
View 2 Replies View RelatedI am having an odd problem with my laptop not getting good wireless internet signal when connected to HDMI port on my HDTV. When i flip the laptop screen up the signal goes back to normal . I dont get it... , someone mentioned i should change the power settings to performance, that seemed to not have any affect. my desktop also has a poor wireless signal when connected to the HDMI port on my HDTV.
View 1 Replies View RelatedI can burn a video file to USB stick and then insert that stick in my new HDTV's usb port, and the television recognises and plays the file. So it seems reasonable that a wireless (perfect) or wired (ok too) connection could be made to stream the content. No?I keep looking at the USB wifi sticks that allow filesharing between laptops and wonder why I couldn't just use a pair of them to link the two devices. But I can find no information out there at all on this.My problem is that movies burned to dvd or usbstick fail to play about half the time via the television usb port or via the blu ray player. "Error, no video file detected". And subtitles are very very dicey. Samsung's firmware (latest updates installed) just doesn't seem to handle files nearly as well as most software based players. VLC player on the laptop (and most players for that matter) play movies without trouble. Included subtitle files always sync up just fine via VLC without any prompting. So I'm looking for a link for watching movies via vlcplayer on my laptop and streaming them to my HDTV or Blu Ray player.
PN50C550 samsung HDTV.
HP 8510w Laptop.
Linux Mint 10 (have already posted in the linux section).
BD-C6500 Samsung blu ray player.
Have HDMI on the laptop and on the TV. Unfortunately, my Nvidia card will not do audio in Linux. A known issue. I've posted in the linux section to no avail.I also am having difficulties running samsung's shareware utilities in linux.Laptop has ethernet, 1394a (firewire), vga, usb, and hdmi ports.HDTV has ethernet, vga (hd-15), usb, hdmi, but no 1394a.Blu Ray player has ethernet (now occupied to router) and usb port on front panel and HDMI (now occupied to HDTV)
I'm connected to a wifi at home on my cellphone, says signal status is excellent, 54mbps, wpa psk security but I cannot connect to the network. My desktop pc is connected via ethernet and it is working. I tried connecting to a neighbor's wifi and it worked on the same cellphone. WLAN light is flashing, the rest are solid. I have a prolink adsl router.
View 1 Replies View RelatedI got a Smart TV (A Sony KDL-60EX645) and once trying the built-in wireless, well, to put it simply, it sucked. Badly. Although the TV IS a few rooms over from the wireless hub, my 4 year old laptop's built-in wireless gets great signal and I can stream video through it, but this TV buffers every 1 minute or so. I've tried plugging in a wireless USB adapter into the one of the USB ports on the TV, but nothing happens and the TV decides to connect from the built-in wireless adapter anyways. I think the TV might only take media through the USB ports. The TV does have a LAN port on the back of the TV, but I don't want to run another cord through my wall.
View 3 Replies View Relatedi am connecting my laptop pc to my hdtv via a wireless gizmo. the gizmo has a dongle transmitter connected to the pc via the hdmi port and the usb port for power, on the receiver hdtv end the receiver box connects to the hdtv through the hdtv hdmi port and to the a/c power on the wall, all this is to replace a hdmi to hdmi cable connection. i hope i,m clear so far. now i want to clone my pc screen to my hdtv screen i.e. i want to see the exact same image or video on both my pc screen and on my hdtv screen and here lies my problem, as i stated in my original post, i am unable to do so using the fn/f8 keys or the microsoft key/p options i have on my pc keyboard. using these keys i can see a video on either the pc laptop screen or on the hdtv screen but not on both at the same time which is what cloning or duplicating means? the internet posts related to this issue recommend using my nvidia control panel to achieve cloning, i have also tried that approach with no sucess because when i go there, i do not have choice for cloning, it seems it doesnt recognize or detect a second monitor?
View 9 Replies View RelatedI bought a MacBook Air thinking I would be able to surf the net wirelessly. Can't do it. It works great with HDMI cable, but I don't want a cable trailing across the room. Wish I had bought a Dell!!! So, can I dedicate my old Dell Inspiron 2200 for this function? I can upgrade the 4 MB RAM to 1 GB if that would work. The Dell uses Internet Explorer, Windows XP and a Netgear WNA3100 Wireless-N 300 USB Adapter. I have upgraded the video and BIOS on the Dell, and the drivers on the Netgear Adapter. I have a 2Wire modem/router from AT&T with 3.00 mps. My new 32" LG HDTV is 1080p with 60Hz, but it is NOT a smart HDTV. I know I won't get 1080p with the old Dell, but what could I expect to get? Roku will not give me surfing capability in a web browser.
View 8 Replies View RelatedI have a Sony Bravia KDL46EX640 which comes with a wireless USB adapter. When I first bought this, I set up wireless network and it went fine. I was able to use the applications for video streaming.
I was trying it again now and it doesn't work. It seems like I can't even connect to my wireless network. I tried to set it up again but it can't find my wireless network. I have tried resetting the TV too (UP arrow + Power button on TV) and still doesn't work. Contacted Sony support but they didn't assist. I have a laptop and ipad connected to the router in the same room so signal is not a problem.