Network Interface Card - Can't Connect To Internet?
Sep 20, 2011
I recently install xp pro and update all necessary drivers for the computer.I also plug-in another network card, this nic is working but seem browsing the web is slower than the original network card comes with the motherboard. Before both network cards show up in (my network places). Now the network card comes with the motherboard doesn't show up, only the network card connection just installed.
I check the device manager both of the network adapters are there, check both of box that say place LAN on taskbar.This could be i have find and install revised intel chipset and lastest BIOS for the pc, now the hard drive activity LED doesn't lit and the ethernet controller has issue. Note when I plug in the cable to ethernet port (one built with pc) there's show both activity light and connection light, but can't connect to the internet.
pc info:
winxp pro sp3
pentium celeron
256 mb of memory
manufacturer: gateway
View 1 Replies
ADVERTISEMENT
Mar 20, 2012
I cannot install the drivers for my TrendNet TEW-423PI network interface card. I am running Windows 7 64-bit with an Intel i7 2700k and an Asus motherboard. I have tried installing with the card already in the computer - no luck. Card out of the computer install and then shut off and put in - no luck. The instructions that come with the card say that after you install the program that instantly runs from the CD provided you should shut off the computer and install the card and when you turn the computer back on the drivers will install automatically. It has failed to do so and although I pulled all possible drivers from TrendNet's site it still stubbornly refuses to even recognize that there are drivers for it to install.
View 2 Replies
View Related
Jan 19, 2012
My friend has a dell d600 with the built in intel wireless card. All of a sudden his computer no longer shows that there is a wireless interface in the computer and he needs this computer for work. I'm thinking the driver may need to be reinstalled but I'm not entirely sure if it's that or a hardware error that's causing this malfunction.
View 3 Replies
View Related
May 9, 2012
i have a 1841 cisco router and i recently purchased a 1 port HWIC wan interface card. My problem is that I cannot see the interface in my config file. Is there something i am missing?
View 8 Replies
View Related
Aug 21, 2012
This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies
View Related
Mar 26, 2013
I have a client using a Dell Poweredge SC440 server. About a month ago the system crashedfter some detailed checking I found it had burned some caps. on the motherboard. I replaced the motherboard & had to reinstall SBS 2003. Since doing this I can't get the server network card to connect. The machine does have 2 NIC's one for the server & one for the internet, neither of which will connect. I believe I have the IP address of both cards incorrect. Could someone tell me what the correct IP addresses (all of them) should be for a new install of SBS 2003? I know the IP address of the router & the service provider (AT&T), but these don't work. I do have a printout of the server when it was originally setup but it only give the server IP which is 192.168.2.1 I have put this address in the IP of the card but don't know what goes in the default gateway nor the perfered DNS
View 6 Replies
View Related
Aug 9, 2011
i have photoh plus broadband,but i want to use internet from sim card ,so what should i do?
View 1 Replies
View Related
Aug 12, 2011
I just purchased a Zonet wireless PCI adapter and I cannot connect to the internet, for my wireless connection it says I have limited to no connection, with a little yellow triangle with an exclamation point, and for the local area plug it says a cable is unplugged. I cant get in touch with the manufacturer either.
View 3 Replies
View Related
Dec 18, 2011
My only issue at the moment and im not sure if im doing something wrong but the wireless card is Intel® Centrino® Wireless-N 1000 and it says it can do Wireless N Connection but im not able to get it connected to the wireless N network. When i go in to view the options it gives for Wireless Mode it says B/G or just B or G. Now up top it does say 802.11N Mode and has the option for Enable and Disable and its Enabled. I have uninstalled the driver and intel software and reinstall everything a few times but no resolve. How i need to get the card to connect to the N Network?
View 5 Replies
View Related
Jan 4, 2012
I have been having difficulty connecting to the internet at my new place, I'm starting to think that the network card I recently bought (D-Link DWA-552 XtremeN Desktop Adapter) might have a problem, but I am not sure. I am currently using my landlord's internet, so I don't have access to the router to turn it on and off, which Windows suggests doing constantly, but I don't think that's the problem because I have internet on all my other wireless devices (Phone, PS3, Xbox).I am able to see the router most times and connect to it, but I am unable to connect to the internet, the networking image in the bottom corner has a yellow warning sign. Also, after a certain amount of time, the wireless card is unable to detect any wireless signal, the networking image in the bottom corner has a red X through it. I disabled all networking interfaces besides the wireless card because of an error message that I thought may have been caused by it: "This computer is continuously switching between two or more wireless access points or routers", but disabling the other interfaces did nothing and the message still appears after troubleshooting.
View 1 Replies
View Related
Sep 7, 2011
I am trying to connect to the internet with a linksys wmp11 wireless running windows xp. I canconnect to the net work by I cannot connect to the internet. When I am looking at the properteis for the card I see the the card has dhcp inabled and I cannot disable.
View 4 Replies
View Related
Jul 4, 2012
I have a wireless modem/router that I connect to my PC thru USB cable and working fine. I newly installed Lan Card (Realtek RTL8139/810x Family Fast Ethernet NIC) and it doesn't connect to internet. It says connected with 100Mbps but Received data bytes are ZERO.
I did ipconfig/all and got all static address I had given while setup. When I "ping 127.0.0.1" it works fine. When I ping 'default gateway IP' it also sends/receives data. When I try to install the driver I got in the CD along with the LAN card, it says "you have already installed recent driver needed etc. " and doesnt allow me to install from the CD. Currently it shows 'Driver Used as : c:windowssystem32driversRtnicxp.sys'
View 7 Replies
View Related
Aug 31, 2009
I can't connect to the internet using wireless. Can access the internet just fine with my cable. All I see is the red x and its not able to detect any networks. I reinstalled drivers, it works fine for a second, and then dies out again.
View 2 Replies
View Related
Mar 30, 2011
He's getting a error saying Unidentified Network. After letting fail windows troubleshoot I got 2 errors. The first was "The default gateway is not available, the second was Local Area connection doesn't have a valid ip configuration. Here's what Ive tried so far.I tried in safe mode. Ethernet works here so I assume is a software issue?Uninstalled and reinstalled the drivers. disabled and enabled, nothing..I tried going into configure network card and giving Network Address a random 12 digit value and that failed.Ive tried updating the drivers but I cant because Dell wants me to their download manager into the computer that has no internet to download the drivers /facepalm..I basically ran out of ideas. This is a Dell Studio laptop. It has 2 network cards a wireless and a Ethernet, the ethernet card is a Realtek PCIe GBE Family Controller, The wireless DW1501 Wireless-N WLAN Half-Mini Card
View 5 Replies
View Related
Mar 7, 2012
I'm unable to connect to the internet because my Dell Wireless 1390 WLAN Mini-Card says that "This device cannot start. (Code 10)"
I have an Dell Inspiron 1520.
View 33 Replies
View Related
May 16, 2012
My laptop has Intel(R) Centrino(R) Wireless-N 1030 internet card but the computer can not connect to the modem properly, the speed is always not the speed that I purchased
View 1 Replies
View Related
Dec 4, 2012
I finally managed to set up this DSL modem / router on Sunday to replace my old Billion router. I set it up with DHCP and running on IP 192.168.1.254.Last night, the power tripped, and when everything came up again the entire network was dead - PC's were not getting IP's from DHCP.I connected a known working cable directly from laptop to router and attempted to access 192.168.1.254, nothing.So I reset the router and try again to the default IP 192.168.1.1. Nothing. Tried another PC, nothing.Restart router, try again, nothing. Plugged into my other router and try again, nothing. When I initially got the router I had the same problem until one day it just worked, still no idea why
View 2 Replies
View Related
May 19, 2013
I'm having problems to ping through interface atm 0/0/0 which is releated to a card HWIC-2SHDSL . The router I have is a 1941. I dont know what to do. [code]
View 8 Replies
View Related
Feb 25, 2011
I have cisco 1721 router so I installed an ethernet interface card so when I make show run I found that there is a fast ethernet 0 and ethernet 0 (which I installed) so i wand to make subinfaces of the etheernet 0 but I can't. I tried to make encapsulation dot.1q but it doesn't accept it.
Is Ethernet0 supported to generate subinterfaces?
View 3 Replies
View Related
Jan 23, 2011
I have some issue on Card Hwic-D-9ESW with Router 2821, i was install card 9ESW in to router 2821 on slot 2 and 3. After I show run, the Cisco Router 2821 have interface F0/3/0 - F0/3/8.and i configure V lan already and interface up also.
When i connect PC to port F0/3/0, the interface is up, but i cannot pint go interface, i mean it request time out. My question is, Is it correct that i install card into slot 2 and 3?
What is the problem all port up but i cannot ping to interface?
Note: the same V lan
View 2 Replies
View Related
Mar 26, 2012
I have existing cisco 2811 (Version 12.4(3c)). I try to add a HWIC serial card into the router but the new HWIC is not detected. There is no new interfece shows up when i do show run. This HWIC is a new card just bought it.
View 7 Replies
View Related
Apr 5, 2011
We have Cisco 2811 router with Hwic-3g-HSPA card. When I configure the system everything was fine. Around two weeks 3g interface works, got IP address ,everyting was fine.Yesterday I check the sytem and I saw that cellular interface become reseting itself, without stoping.We have 2 g.shdls and one 3G connection on the same router. dialer 0 ansd dialer 1 for g.shdls, and dilaer 3 for 3G connection. [code]
View 1 Replies
View Related
Nov 14, 2011
Cisco 1900 , 2900 and 3900 have Interface Slots and Service Module Slots , My question is which type of card is support this slot.
View 6 Replies
View Related
Jun 5, 2011
my office is looking in ordering a HWIC-1FE to supply our cisco 1841 router with a second ISP connection. i wanted to find out if this card support load balancing and fail over? not sure if fail over is the right terminology so ill explain, i need it so that if one ISP connection goes down (as it does often) it fails over to the second ISP.
View 3 Replies
View Related
Jan 13, 2012
I have a Vostro 1500 and cannot connect to a wireless network with a dell 1395 WLAN minicard os XP home, what are possible solutions?
View 1 Replies
View Related
Apr 20, 2012
I think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies
View Related
Jan 30, 2013
In the bottom floor there are three computers, an iMac computer that receives an average wireless Internet signal, desktop computer and a laptop.I want to take care of the desktop computer and buy a network card, the next card:TP-Link TL-WN951NNow it has three antennas, each of its reception range is 2 dbiI should buy three of the 10 dbi antennas and connect them to the network card?It will give a good solution strong wireless signal and good speed?
View 4 Replies
View Related
Nov 23, 2012
Namely an Unidentified Network with no NETWORK access. Some information first, the NIC that Im using is the Realtek PCIe Family Controller, Ive updated the drivers, Ive uninstalled, Ive reinstalled. Ive basically been on the internet for the past two days trying all the solutions. Including refreshing and renewing my ip, trying a static ip (although, Im still not sure if I did this step correctly) Ive tried disabling IPV6, Ive tried adjusting my speedflux. The problem is also intermittent with seemingly no reason whatsoever, some days Ill go without internet for the entire day, then the next day Ill boot up my computer and Ill have internet again. It should be noted that when I enable WIRELESS on my laptop, Im able to connect to the network, but when I enable wired, I am not able to.
Here is the ipconfig /all for when Im connected wirelessly and have a connection.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
[Code]....
It should be noted that I am using powerline adapters for my connection, but as I said, this problem only recently started cropping up. I went fine for almost a week with no problems, then all of a sudden it started happening. Im still able to connect wirelessly so its not too much of an issue, but I prefer via Ethernet..
View 2 Replies
View Related
Nov 23, 2012
Recently I've been having some internet problems. Namely an Unidentified Network with no NETWORK access.the NIC that I'm using is the Realtek PCIe Family Controller, I've updated the drivers, I've uninstalled, I've reinstalled. I've basically been on the internet for the past two days trying all the solutions. Including refreshing and renewing my ip, trying a static ip (although, I'm still not sure if I did this step correctly) I've tried disabling IPV6, I've tried adjusting my speedflux, believe me I've tried just about everything, I don't have one blue link left when it comes to my google searches on fixing this problem.The problem is also intermittent with seemingly no reason whatsoever, some days Ill go without internet for the entire day, then the next day I'll boot up my computer and I'll have internet again. It should be noted that when I enable WIRELESS on my laptop, I'm able to connect to the network, but when I enable wired, I am not able to.[code] I'm still able to connect wirelessly so its not too much of an issue, but I prefer via Ethernet.
View 2 Replies
View Related
Mar 1, 2011
I am becoming very irritated with my laptop. I would like to know why I can only connect to the network Linskeys, and it'll have this little yellow thing, and it'll say its connected but once i click and internet thing (like google chrome) it will say I am not connected.
View 4 Replies
View Related
Apr 19, 2012
my brother wanted me to download some program on my computer, i did so and it needed a reboot, once i rebooted i couldnt connect to the internet anymore. its been like this for about 3 weeks. i would really like to be able to use my computer again. it says its connected to a unidentified network, but cant connect to the internet.
View 13 Replies
View Related
Oct 7, 2012
Is there such a thing as a repeater, or relay which can receive the wireless signal from the router which is situated at one end of the house, and resend it to a part of the house that doesn't get a good signal from the router?
View 1 Replies
View Related
Sep 19, 2011
I have an internet connection of 100.0mbps and have two pc connected to it sharing internet connection but the other pc can't connect to internet when the other one is connected? how can i i fix it?
View 16 Replies
View Related
