Cisco WAN :: 1900 / 2900 / 3900 - Which Type Of Card Support Interface Slot
Nov 14, 2011Cisco 1900 , 2900 and 3900 have Interface Slots and Service Module Slots , My question is which type of card is support this slot.
View 6 Replies
ADVERTISEMENT
Cisco WAN :: 1900-3900 Series Router With 100FX Fiber Interface
Oct 30, 2011Is there a router (1900-3900 series router) that will support a 100FX fiber connection. We use to use 2800-3800 and 2600-3700 series routers with FX fiber interface now these routers are no longer available and our need for 100Mbps FX is still a requirement.
View 3 Replies View RelatedCisco WAN :: MBTF For 2900 And 3900?
Jun 20, 2012provide my some (official) info regarding the MBTF for the C2900 and C3900 routers (2911 and 3945)? This info is currently not part of the data sheets.
View 0 Replies View RelatedCisco WAN :: 1 GigE WAN Module For 2900 / 3900 Router
May 28, 2013I am in search of a 1 Gig Ethernet WAN module for 2900, 3900 series router.I want to terminate 230mbps link on this module.I found EHWIC-1GE-SFP-CU option but as per service provider it will not support to 230mbps link.
View 3 Replies View RelatedCisco Switching/Routing :: Changing E-Delivery PAK From 2900 To 1900
May 15, 2013we ordered a data e-delivery PAK L-SL-29-DATA-K9= (FOR A 2900 SERIES ROUTER) but after we received the PAK we discovered that the client actually has a 1900 router. Any easiest way of rectifying this mistake so that we can use the PAK on a 1900 series router?
View 1 Replies View RelatedCisco :: 3750 / 2900 / 3900 - Updating The Device Packages On The LMS 3.2 Server?
Feb 29, 2012I faced some problems when updating the device packages on the LMS 3.2 server. Therefore, I really need device packages of switch 3750, router 2900 and router 3900 series. I had tried update online but could't view any devices.
View 1 Replies View RelatedCisco :: 2900 Series / LMS3.2.1 - Unknown Device Type
Jul 18, 2012I have added 2900 series devices in LMS3.2.1 but same are showing "unknown"device Type in a report generated from common services DC R device List.
Both are snip enabled and responding too. What is the reason behind unknown device type so those are not reflecting in any module.
36.N007010101CRRUNKNOWN37.N007010103CRRCisco 2921 Integrated Services Router38.N007010201ASRUNKNOWN
Network Card Not Sitting In PCI Slot Correctly?
Feb 10, 2012Just finished my first build and everything went pretty smoothly but my wireless network card wasn't working. I noticed after I opened it back up that in order for my to screw the card in place it made the right side of the card tilt up.
So I just set it in the PCI slot correctly but there's no way for me to screw the card in place. I know my MOBO is set properly. My graphics card fits perfectly.
Dell :: Sim Card Slot On Studio 1558?
Jun 21, 2010i have a brand new dell studio 1558
on my old computer i used an external PCMCIA modem from my cellular company , the modem uses a sim card to connect to the internet..
can i place the sim card inside the computer and use it as i used the previous modem ?
[URL]
Cisco Switching/Routing :: Using SD Card Slot On ME3600X
Mar 13, 2013we are trying to use the SD Card Slot on an Cisco ME3600X (ME-3600X-24FS-M) IOS Version 15.2(4)S2. If i try to copy a file from the sd card slot to the flash there is no Option like "slot0:" or something alse and no syslog message appers while adding the SD Card.
View 5 Replies View RelatedCisco WAN :: 3900 ISR G2 AES256 Support In Hardware?
Jan 29, 2011The datasheets indicate that the 39xx series ISR G2 routers support AES, but they don't indicate if they handle both AES128 and AES256 in hardware. Via our account manager, we've heard that they only support AES128 in hardware, but not AES256. Given there's no equivalent of an AIM-VPN/SSL-3 module for a 39xx router, this could be a problem for a deployment we're looking at doing.
I can find no document anywhere on cisco.com that confirms that AES256 specifically is supported IN HARDWARE on, say, a 3945E router.
And, if it is supported, are there any performance numbers available for throughput? We're trying to find out if a 3945E is appropriate, or if we need to go with a 7206VXR w/NPE-G2 and VAM2+ module.
Cisco WAN :: 2900 - Bridge From WIC Interface To Ethernet Interface
Apr 22, 2012Needing to bridge from my wic interface to an ethernet interface on a 2900 series router so that I can pass through the ip address given to the WIC, to my ASA so that I don't have to give my ASA a private range address. (Just like a service provider might do when bringing a T1 with managed router in to my prem)
View 1 Replies View RelatedCisco WAN :: 3750 / 3900 / 1002F - Support For 2 To 3 Full-view BGP
Aug 12, 2012Now, I use Catalyst WS-C3750G-12S-S as BGP router. But it is switch do not support in higher 65535 (32 bit asn). In future, I plan to use two or three ISP (each will be connected through 1Gb uplink). I need a router, who will be support 32 bit AS number and work with two or three full view BGP tables. I look at Cisco 3900 series, and ASR1002F.
View 2 Replies View RelatedCisco Switching/Routing :: How Many Route Entries Does 3945E Or/and 3900 ISR G2 Support
Dec 1, 2011I have a question concerning about how many ospf and bgp route entries does 3945E isr g2 router support?
View 6 Replies View RelatedCisco WAN :: Interface Embedded-Service-Engine In 1900 Series
May 3, 2011Sure this is a simple one. New to the 1900 series routers, have a 1921 with IOS 15.1. Noticed that there is a standard interface labeled Embedded-Service-Engine0/0. What the purpose of this is? Cannot seem to find any detail on it. See extract from default config below.
View 5 Replies View RelatedCisco WAN :: 3900 Routing And Bridging Multiple Interface Configuration
Dec 5, 2011I know this is not a the preferred way to do it, but this just an interim network configuration until the Remote Site gets re-located and reconfigured. I'm trying to bridge and route traffic and hoping the community can offer a review of the sample configuration and/or some ideas to make this a reality.
Existing network is bridged across site-to-site private line (p-2-p) so 192.168.100.0/24 devices exist at both locations. In order to reduce bandwidth consumption across the p-2-p, the 172.20.100.0/24 devices (end user PCs and new to the environemnt) will be routed out a local Internet connection which in turn reduces the p-2-p traffic to just private network traffic for the two networks. That same network requires routing through the 192.168.100.0/24 network in order to access the private WAN connected to the 3900 router with IP 192.168.100.1.
Cisco WAN :: 2900 (specifically 2951) Will Support More Than 2 Mbps Link
Mar 7, 2012My query is whether cisco 2900 (specifically 2951) will support more than 2 Mbps link (i.e either through ethernet or serial)?
View 1 Replies View RelatedCisco WAN :: How To Configure Router 2900 To Support Connection From 2 Firewall
Jun 24, 2012how to configure a router 2900 to support connection from 2 firewall ( Active Standby connections) How can i said the router to send the traffic to the stand by when it go down the active Firewall?I was planning to use a Switch ( layer 2 capacity only) in the middle of the equipments ( between the firewalls and the router) in order to send always the traffic for 1 physical interface from the router side , and manage to route all the internatl traffic to the virtual IP of both Firewalls.Also i dont know yet how to configure a VPN site to site if i have that scheme and some Publics NAT ( Firewall - Switch - Router ), i was planning to configure a NAT in the Router in order to allow the VPN traffic to internal IP of the Firewall but still dont know if it will work.
View 2 Replies View RelatedCisco WAN :: QOS Not Supported On SVI Interface 2900
May 15, 2011Service policy output command is not supporting on Vlan interface of Cisco 2900 Router.I am having one HWic 4ESW Card and configured VLAN interface. But Service policy output command is not supporting.Same config is supporting in the Cisco 2800 Router.
View 13 Replies View RelatedCisco Application :: 2900 Router WCCP Support For GRE Encapsulated Redirects
May 23, 2012I've been looking around Cisco's website but I can't find an answer to this -- If the 2900 platform suppots WCCP redirection using GRE?
View 1 Replies View RelatedCisco :: LMS 4 Support Unknown Device Type ASA 5585
Dec 22, 2011Though ASA5585-X S-20 and UCS C200 are not in LMS 4.0 supported device table, I'm wondering if there is any way to monitor these devices using LMS? Our data centre has a quite number of UCS C200 servers and two ASA5585-X S-20.
View 7 Replies View RelatedCisco WAN :: Which Type Of HWIC Card Should Use In 2911-sec / K9 Router
Feb 14, 2012I have cisco 2611 + NM1E , and i want to trade in for a cisco 2911 security router + HWIC4 Card.Which type of HWIC card should i use in the cisco2911-sec/k9 router?
View 1 Replies View RelatedCisco WAN :: 2900 - Traffic Not Passing From One Interface To Another
Jan 15, 2013I am facing a very big problem with site to site vpn on cisco 2900 ios.
I configured the vpn and when i ping from router itself to destination ip with source as lan interface , VPN works, no problem.
but when i connect any computer directly to router's lan interface to initiate traffic , it doesnot work at all. and on computer's lan i see yeloow sign.
mtu is 1500, speed is auto (I tried changing also) , duplex is auto ( i tried changing also) , through firewall on pc should not affect but still i disabled it.
since their is no problem with vpn config as vpn comes up when i initiate ping from router itself but i dont know why it is not working from lan.
do we need any inspect icmp on this router also ? or any policy modification to pass traffic across the interfac on router is required ?
I was useinf c2900k9-15.0(M4).bin and i upgraded it to 15.3 which is lated to get reed of any bug .
I connected two laptops directly to router's gi0/0, g0/1 interface to ping from one laptop to another but this also did not work.
Cisco WAN :: 3945 Use T3 Functionality / Enabled Command Card Type T3 1
Feb 10, 2011We purchase a new 3945 router and a NM-1A-T3/E3 card. We would like to use the T3 funcationality so we enabled the command card type t3 1 (slot1), reboot the device.After reboot the sh ip int brief command should show the serial interfaces e.g serial1/0.In this case it doesn't, it shows the Gigi interfaces and ATM1/0 no serial interfaces.I've also tried upgrading to the latest IOS from cisco.
View 2 Replies View RelatedCisco WAN :: 2900 Bandwidth Segregation On Router Interface
Aug 27, 2012I have a requirement where 3 Branch locations of an organization is connected to their hub location via MPLS.They have an internet connection only at HUB as shown in the diagram (Attached)Now all spoke locations should access internet via hub.At spoke locations is there a way that I can have Cisco 2900 router and dedicate only 30% of the WAN bandwidth for internet browsing traffic.Remaining 70% should be used for accessing applications at hub.
For example if i have 5 Mbps Mpls port at spoke I want to dedicate only 1 Mbps for internet browsing traffic remaining should be dedicated for accessing the application at hub.How can we acheive this? Can it be done by using PBR and rate limiting?
Cisco WAN :: Track Interface On Ethernet Circuit 2900
Apr 22, 2012The only option that I have under the IOS that's installed on a 2900 series router is track. I don't have a version that supports SLA. The interface is connected to a switch that the ISP gave, and all of the tests that I've done refuse to make the circuit go down. If I were to lose the circuit, the interface won't show to be down unless the switch were to go down.
Is there any way with track to see that the provider's circuit went down on a switch? I was going to set up sla to ping the ISP's address, but I can't do that unless I upgrade the OS. These are a pair of routers running hsrp at a remote datacenter. Is sla the only way that I'm going to be able to accomplish this? I have tried track with different options in gns and all of them keep the CE's interface up and doesn't show it down. Watching a route in the table isn't feasible because I wouldn't want it to fail over because another site is having problems. Tracking the route doesn't work for connected routes either because the route itself doesn't leave the table as long as the interface is up.
Cisco WAN :: 2900 - Interface Speed And Duplex Settings
Jan 27, 2013we have connected gig interface Ethernet on Cisco 2900 series router to mpls link connected to our corporate network ,the issue here is our router interface speed and duplex settings are set to auto negotiation.The interface is negotiating speed and duplex at 10 and half where the provider side interface is hard coded to 100 and full duplex.when we tried to hard code the settings on our router to match the provider the interface never come up.
View 4 Replies View RelatedCisco VPN :: Adding New Peer Without Removing Cmap From Interface 2900
Dec 10, 2012I have a frustrating issue with a dynamic VPN head end running IOS 15.2 on 2900's. I have existing keyrings, and isakmp profiles (both main and agressive) running. When I add in a new peer, by adding in a keyring prechared statement and a match identity in the isakmp profile, phase 1 biulds but phase 2 only gets right to the end and the Cisco side resets the connection because it did not get back a response to it's Phase 2 proposal.I have tried a number of soft clear commands to remedy this (I do have 16 other production tunnels I do not want to take down) and no avail. This is very consistent. We had this happen last week in the same manner, and the TAC finally said I must reboot the system. So I removed the cmap from the interface, and reapplied it (using notepad to do it all at once). All the tunnels dropped, and after a few manual restarts on the far end for thos etunnels that are tempermental, all tunnels came back up, including my new add.I have a pair of 3900's running 15.1 code in the US that terminate the same tunnels, and I can add and remove PEERS all day long without resetting anything. Could there be a more polite way of resetting what ever it is that removing the CMAP does to allow my new peer to get the full treatment here?
crypto pki token default removal timeout 0
crypto keyring Site-to-Site
pre-shared-key address a.a.a.a key lkdshjfhjkdsfkjfsjkddedswdes
pre-shared-key address b.b.b.b key lkdshjfhjkdsfkjfsjkddedswdes
[Code] .....
I just negate this and re-add and new peers start working.
Cisco WAN :: 2900 Router - Does Self Ping Works On Dialer Interface
Sep 11, 2011I have the below configurations done on a 2900 router. [code]I would like to know, if the IP address assigned to dialer1 interface "20.1.2.133" would be listed in "show arp" ?, as it failed to list on our router and I want to know if this is an expected behavior ?
Secondly, does self ping 20.1.2.133 (dialer interface IP) work ? [code]
Cisco WAN :: 1841 Router - HWIC Interface Card - Cannot See Interface In Configuration File
May 9, 2012i have a 1841 cisco router and i recently purchased a 1 port HWIC wan interface card. My problem is that I cannot see the interface in my config file. Is there something i am missing?
View 8 Replies View RelatedCisco Command Similar To Junipers Monitor Interface Type / Number?
Mar 9, 2011Any Cisco command similar to Junipers monitor interface interface type / number. It's handy seeing real time interface stats. monitor interface?
View 5 Replies View RelatedCisco Switching/Routing :: 2900 - Nexus 7010 Layer 2 VLan 11 Active But Interface Shutdown
Sep 13, 2012I understand the vlans on the catalyst side of the house on 2900 to 6500 Catalyst switches.
This 7010 running nx-os 5.1(3) I did not setup, but have to manage it. Hasn't really been a proble till now.
My nexus 7010 has a Layer 2 only vlan 11. It is "Active" but the interface is "shutdown". Yet, it is passing traffic across the directly connected ports on the nexus 7010 and to other switches in my network. Vlan 11 is being set out via VTP to all my switches and things are running fine.
I need to create another L2 only Vlan. I can't seem to find any docs that indicate that a Layer2 vlan Interface on nx-os should be in "shutdown" mode as part of the setup. I do see in the docs where it has to be set "Active" as part of the process.
Is this the correct way to seutp a L2 only vlan on nex-os? Leave the interface in "shutdown" but make it "Active"?
Mystery Vlan 4 and 6
The mystery deepens. I have other L2 vlans ,Vlan4&6 that are NOT defined as "Interface Vlan4" in the nexus config, yet it is applied to GigE ports on the nexus and these Vlans 4/6is also being sent out VTP to all switches. Even weirder is that these vlans have names associated with the numbers. These are valid Vlans that were configured on the old 6509 before the Nexus was installed.
I have checked all switches, NONE are running in Server mode for VTP, all are in CLIENT. The nexus 7010 is the only device running in VTP Server mode.
Cisco Firewall :: ASA 5550 Switch - Change Media Type Command On Interface
Oct 12, 2011I am switching a switch connecting to the ASA5550 tomorrow. My current switch is using fiber connecting to the ASA. The new one only support copper. If I switch between fiber to copper on the ASA (change media-type command on interface) will it cause a down time? I have VPN tunnel on the ASA and don't want the session to reset.
View 2 Replies View Related