Cisco Switching/Routing :: How Many Route Entries Does 3945E Or/and 3900 ISR G2 Support
Dec 1, 2011I have a question concerning about how many ospf and bgp route entries does 3945E isr g2 router support?
View 6 Replies
ADVERTISEMENT
Cisco Switching/Routing :: How Many Route Entries 2821 Or 881 Router Can Support
May 21, 2012One of our client wants to know "How many route entries a 2821 router or 881 router can support" Such as the 3750 can support 11k routes in ‘desktop routing’ mode. But I want to know the limitations on routers.
View 1 Replies View RelatedCisco Switching/Routing :: Create Trunk Between 4507 And 3945E Router And Route Two VLans
Feb 12, 2012i want to create a trunk between 4507 & 3945E router & route two vlans from router 3945E
4507# vlan 99 & 51
# int vlan 99
# ip add 10.22.100.1/24
#int vlan 51
# ip add 10.22.103.1/24
[code].....
4507 version : IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.00.SG RELEASE SOFTWARE (fc4)
3945E: 15.1(2)T4 what I am missing?
Cisco Firewall :: How Many Route Entries Can ASA5520 (8.2.1-k8) Support
Sep 24, 2011how many route entries can ASA5520 (8.2.1-k8) support?
View 2 Replies View RelatedCisco Switching/Routing :: 5500 ARP Entries And Support For VMs?
Jul 15, 2012How many VMs can a pair of 5548s support? Remember, for each VM, I will have an ARP entry in the 5500 ARP Table (assume 5500 is the L3 default gateway).
View 3 Replies View RelatedCisco WAN :: Routing Table Entries Support On 1921 / K9?
Nov 27, 2012Is there a Table which the list the route table entries on Cisco ISR Router especially ISR 1921 Router.
View 3 Replies View RelatedCisco Switching/Routing :: Route-map Command Support On Switch 3550?
Sep 30, 2012I have cisco switch 3550 IOS Version 12.1(19)EA1c.
I can configure route-map commands on that. but i can not apply that into any vlan interface. while i try to apply the following command ( ip policy route-map PBR) on VLAN int i get an error msg saying that the command is not recognized.
Cisco WAN :: Can 3945E Support VRF-Lite
Mar 31, 2013Can Cisco 3945E support VRF-Lite ?
View 4 Replies View RelatedCisco Switching/Routing :: 3945E - Bandwidth Percentage For Nested Policy Maps
Jul 15, 2012I'm trying wrap my head around bandwidth guarantee for nested maps. I tried adding a new class to two of my policy-maps today, and got this error: 3945E-1(config-pmap-c)#bandwidth 3000 Insufficient bandwidth 3000 kbps for the bandwidth guarantee
I'm not sure how it knows that with the nested maps and how it's computed. I have a 100mb WAN connectin going to 19 branches. I have a class-map that identifies traffic to the individual branch and within that class, a policy-map is applied to prioritize voice over video etc.
Here's the QoS setup:
class-map Branch1-Policy
match access-group branch-1-acl
*
*
[code]....
I was adding the Video-Conf class to both Traffic-6calls and Traffic-10calls when I got the above error. How would that percentage be calculated? I know by default i can only reserve up to 75% of interface bandwidth. The platform is 3945E running 15.1(3)
Cisco WAN :: 3900 ISR G2 AES256 Support In Hardware?
Jan 29, 2011The datasheets indicate that the 39xx series ISR G2 routers support AES, but they don't indicate if they handle both AES128 and AES256 in hardware. Via our account manager, we've heard that they only support AES128 in hardware, but not AES256. Given there's no equivalent of an AIM-VPN/SSL-3 module for a 39xx router, this could be a problem for a deployment we're looking at doing.
I can find no document anywhere on cisco.com that confirms that AES256 specifically is supported IN HARDWARE on, say, a 3945E router.
And, if it is supported, are there any performance numbers available for throughput? We're trying to find out if a 3945E is appropriate, or if we need to go with a 7206VXR w/NPE-G2 and VAM2+ module.
Cisco Switching/Routing :: 3900 - Add On Module
Jun 10, 2013i have a cisco router (3900 series) and a add on module (4 x 1 Gig port module). For some reason i cant seem to port channel them and cant do routing (can set an ip address on those ports). I can do port channel and routing on on-board ports. Do i have to enable any commands to do this ?
View 3 Replies View RelatedCisco Switching/Routing :: 3900 - ISP Failover Using IP SLA?
Feb 20, 2012I am trying to configure ISP failover using IP SLA tracking in Cisco 3900 router(C3900-SPE100/K9).
I want to configure below commands:
R1(config)# ip sla 1
R1(config)# icmp-echo 2.2.2.2 source-interface FastEthernet0/0
R1(config)# timeout 1000
[Code].....
configure IP sla static route tracking in Cisco 3900 series router.
Cisco WAN :: 3750 / 3900 / 1002F - Support For 2 To 3 Full-view BGP
Aug 12, 2012Now, I use Catalyst WS-C3750G-12S-S as BGP router. But it is switch do not support in higher 65535 (32 bit asn). In future, I plan to use two or three ISP (each will be connected through 1Gb uplink). I need a router, who will be support 32 bit AS number and work with two or three full view BGP tables. I look at Cisco 3900 series, and ASR1002F.
View 2 Replies View RelatedCisco Switching/Routing :: Does 3900 Router Has Same Features On PBR
Dec 17, 2011I would like to configure the policy base routing (PBR) on router (3900) base on the "specific tcp port" (TCP port 16255) to re-direct the traffic to another FE port.
From cisco web portal, CAT 4500 should support PBR as below:"Policies can be based on IP address, port numbers, or protocols. For a simple policy, use any one of these descriptors; for a complicated policy, use all of them." url...
Does 3900 router has the same features on the PBR? if yes, can it support "source tcp port" and/or "destination TCP port"?
Cisco Switching/Routing :: 3900 - Network Splitting By Link Of 60 Mb
Nov 29, 2012how to go about config my bureau connected to HQ and separated by a WAN link of 60mb.
This is my plansplit into halves that is 30 mb for LAN connections, internet and file serving for strictly video streaming, bureaus have routers 2800 conected to HQ HQ has a router 3900
Cisco Switching/Routing :: 3900 Series Router Licensing?
Feb 6, 2013Can the 3900 series router be ordered or upgraded to a license with advances enterprise services? I have a few of these routers and I'm looking to get the license upgraded if possible.
View 1 Replies View RelatedCisco WAN :: 1900 / 2900 / 3900 - Which Type Of Card Support Interface Slot
Nov 14, 2011Cisco 1900 , 2900 and 3900 have Interface Slots and Service Module Slots , My question is which type of card is support this slot.
View 6 Replies View RelatedCisco Switching/Routing :: ME3400 Limited CDP Entries
Apr 4, 2013I have the ME3400 deployed in an the following design. 8 100Meg ports connects to Cisco 2955s, and the 1Gig port uplinks to a Cisco 3560. My CDP neighbour table only shows an entries for the uplink Gig port. If I look at the CDP stats in the show cdp Interfaces Fastethernet 0/1,, I see CDP packets being sent every 60, but nothing returning.
View 4 Replies View RelatedCisco Switching/Routing :: Stale ARP Entries On 6500 Running IOS?
Sep 11, 2007On occasion I will have to clear the ARP cache on a 6500 when a customer swapeeds out a firewall or firewall NIC. The ARP cache will show the MAC of the previous device and will not update until either the ARP table refreshes dynamically (currenty at default time) or it is cleared manually.
Sometimes I need to clear it manually and sometimes is is refreshed dynamically when the new device comes up. Inconsistant issue....
Under what circimstances will an ARP entry NOT be refreshed when a firewall or firewall NIC is swapped out.
Cisco Switching/Routing :: 6509 - Maximum ARP Entries On Sup720?
Jan 13, 2008Just a very quick one. Is there any physical limitation to how many ARP entries a 6509 and sup720 can have?
View 4 Replies View RelatedCisco Switching/Routing :: Clarification On ARP 1700 Received More Than 30 Entries
Apr 15, 2013As a matter of fact i am new to this field .I have cisco 1700 series router which has ea0 and FE 0 port
E0 connected to LAN and FA0 for ISP ,both are configured wit publisc ip.and ststic route to ISP. (E0 connected to switch and fa0 connected to ISP MUX)
When i issued sho arp command i have received more than 30 entries of MAC and IP address . I am wondering how i received this much mac in arp table.
Linksys Wireless Router :: How Many Port Forwarding Entries Does WRT310N Support
Dec 13, 2011I want to upgrade my router but I need a router that supports more port forwarding entries for my applications. I have my eye on the WRT310N router but I need to know how big its port forwarding table is.
View 2 Replies View RelatedCisco Switching/Routing :: 6509 / Mac Address Error Message No Entries Present
Dec 6, 2012I am receiving this error after connecting a copper adapter on a GBIC blade in a 6509. Here are the results from the show Interface. I am waiting to confirm the device on the other side settings but as far as I see I get UP and Up for protocol and line respectively.
GigabitEthernet2/11 is up, line protocol is up (connected)
Hardware is C6k 1000Mb 802.3, address is 0009.11e4.f3ce (bia 0009.11e4.f3ce)
Description: RCPBSDEV
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
[code]....
Cisco Switching/Routing :: Catalyst 3560 - Routing Enabled With / Without Default Gateway Or IP Route Command
Feb 25, 2013We have two catalyst 3560 switches running c3560-ipbasek9-mz.122-58.SE2.bin They are connected using etherchannel using gi 0/21 - 24 interfaces.
on 3560-1 switch, there isn't any ip-default gateway or ip route configured. It only have 1 interface vlan configured.
on 3560-2 switch, there is ip default gateway configured along with 1 interface vlan.
What i dont understand here is that, i can reach out to other subnets from 3560-1 switch in which the routing is not enabled?
Cisco WAN :: 7600 - How Many Sessions BGP Route Reflector Can Support
Jan 20, 2011how many sessions a BGP Route Reflector can support? is it 10, 100 or 1000 BGP sessions? What degradation of performance may arise in the case of a BGP RR sessions overload? Consider that the RR I'm deal with has both the control plane and teh forwarding plane. Which command I may use for get the output about BGP sessions resurces used level?
The following are the data about the RR:
Cisco 7600
WS-SUP720-3BXL
Version 12.2(33)SRD5
cisco CISCO7609 (R7000) processor (revision 1.2) with 983008K/65536K
Cisco Switching/Routing :: 10.2.2.2 / Can Use Standard ACL In Route-map For BGP Fall-over
Jan 22, 2012I haven't got time to test different configurations yet. Just want to quickly ask here about the fall-over route-map configuration. I saw lots of example using pip prefix-list to specify the next-hop for tracking. Is that the only way you can do it? Can you just use a standard ACL to specify that host like permit host 10.2.2.2? ip prefix-list will do like ip prefix-list seq 5 permit 10.2.2.2/32. And you apply the prefix-list to route-map then. ACL will work?
View 2 Replies View RelatedCisco Switching/Routing :: Ip Policy Route-map On 3750g?
Nov 18, 2008I have a 3750g on which I am trying to configure the ip policy route-map command on each of the vlan interfaces. However after entering the command it does not appear. I'm not sure what to do at this point. I have changed the SDM template to routing and I am running the IPServices image.
View 2 Replies View RelatedCisco Switching/Routing :: 2800 Route Filtering
Apr 3, 2012I have a router with two interfaces what i need to filter the HTTP traffic from one interface and the rest of the traffic through the other on my cisco router 2800.
View 3 Replies View RelatedCisco Switching/Routing :: 891 Router Secondary Ip Route
May 22, 2013I have an MPLS network router(Router1) and an internet router(Internet1) at a site of mine(Site1). the MPLS router sends all unknown traffic out the internet router. Router1 is the default gateway for all hosts and directs the traffic.I also have another network at an alternate site (Site2) on the same mpls network also with an internet egress. It is composed of an MPLS router (router2) and an internet router (Internet2).I would like Router1 to send internet bound traffic out Internet2 if Internet1 is down. Basically the statement on Router1 for the unknown traffice is ip route 0.0.0.0 0.0.0.0 172.31.1.254I have never heard of IP SLA before but it seems to be the best method for this situation.
View 2 Replies View RelatedCisco Switching/Routing :: 890C-W Cannot Route With PPPoe?
Apr 2, 2013I have a cisco 890c-w with routing and wireless，contain 8 switch ports（fastethernet 0 - 7），one 100m route port（ fastethernnet 8），one giga port gigagethernet 0
configuration pppoe，dialer1 can get WAN IP。
0-7 ports in vlan2，vlan2 config ip add 192.168.1.1
In router，ping 8.8.8.8 is ok，but ping 8.8.8.8 source 192.168.1.1 can not ok，so my pc can not go internet through 0-7 ports。
I think routing problem，but don't find reason
service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname Router!boot-start-markerboot system flash c890-universalk9-mz.151-4.M2.binwarm-rebootboot-end-marker!!enable password password!no aaa new-model!memory-size iomem 15service-module wlan-ap 0 bootimage autonomouscrypto pki token default removal timeout 0! ip source-route!ip cefip name-server 61.234.145.102ip multicast-routing no ipv6 cef!multilink bundle-name authenticatedvpdn enable!vpdn-group PPPoE!license udi pid CISCO892C-
[code]....
Cisco Switching/Routing :: 3750 Route Map Counters
Mar 19, 2012We're running a simple policy map on a 3750 stack (IOS version 12.2(53)SE2), but the route-map counters do not show any matches:
NYKIRDRCX01#sh route-map
route-map remote-route, permit, sequence 51
Match clauses:
ip address (access-lists): remoteACL
Set clauses:
ip next-hop 192.168.101.5
Policy routing matches: 0 packets, 0 bytes
However, I've confirmed via our netflow monitor that the traffic we're trying to send to the appropriate next hop is, indeed, getting there correctly.
I've seen issues in the past with a 3750 not reporting counters correctly.
Cisco Switching/Routing :: Ip Policy Route-map On 3750
Jun 10, 2010I try to enter the command "ip policy route-map" on 3750's interface. But the command doesn't appear. Why? Whereas I see several times that this command is possible on this switch. What I have to do to enter this command?
View 3 Replies View RelatedCisco Switching/Routing :: Cannot Route Between SVIs On 3750
Nov 19, 2012I have a 3750 stack with several vlans and svi's. We have had no need to route between them until now. Here is what I have done...
Created the vlans.. vlan 1 and vlan 25
Given each vlan an ip address vlan 1 10.0.0.2 and vlan 25 is 192.168.5.250
no shut on everything
ip routing
sdm routing preferred
default route 0.0.0.0 0.0.0.0 (isp)
If I'm on the switch I can ping anything on vlan 1 and anything on vlan 25 (the device I'm pinging on vlan25 is the svi and a dsl router 192.168.5.1) From a computer on vlan 1 I can ping the gateway/svi for vlan 1 and the svi for vlan 25 but no devices including the dsl router which pinged fine. If I put the computer on an access port for vlan 25 I can ping everything just fine on vlan 25 but not vlan 1 (gateway set correctly)
As a test I put in a static route ip route 195.113.20.11 255.255.255.255 192.168.5.1
I did a traceroute from the switch and it comes through great. I did a traceroute from the computer and it hits my gateway of 10.0.0.2 vlan 1 and stops.