Cisco Switching/Routing :: Does 3900 Router Has Same Features On PBR
Dec 17, 2011
I would like to configure the policy base routing (PBR) on router (3900) base on the "specific tcp port" (TCP port 16255) to re-direct the traffic to another FE port.
From cisco web portal, CAT 4500 should support PBR as below:"Policies can be based on IP address, port numbers, or protocols. For a simple policy, use any one of these descriptors; for a complicated policy, use all of them." url...
Does 3900 router has the same features on the PBR? if yes, can it support "source tcp port" and/or "destination TCP port"?
View 2 Replies
ADVERTISEMENT
Feb 6, 2013
Can the 3900 series router be ordered or upgraded to a license with advances enterprise services? I have a few of these routers and I'm looking to get the license upgraded if possible.
View 1 Replies
View Related
Jun 10, 2013
i have a cisco router (3900 series) and a add on module (4 x 1 Gig port module). For some reason i cant seem to port channel them and cant do routing (can set an ip address on those ports). I can do port channel and routing on on-board ports. Do i have to enable any commands to do this ?
View 3 Replies
View Related
Feb 20, 2012
I am trying to configure ISP failover using IP SLA tracking in Cisco 3900 router(C3900-SPE100/K9).
I want to configure below commands:
R1(config)# ip sla 1
R1(config)# icmp-echo 2.2.2.2 source-interface FastEthernet0/0
R1(config)# timeout 1000
[Code].....
configure IP sla static route tracking in Cisco 3900 series router.
View 3 Replies
View Related
Oct 2, 2012
I am trying to stack the following -
3750G 12S - 12.2.53(SE2 IP Services) Running EIGRP & OSPF
with
3x 3750X 48P-S - 12.2.53(SE2 IP Base License)
Doing some research, the IP Base does EIGRP on the 3750X, does it do OSPF?
If not I will have to get licence for the 3750X?
View 3 Replies
View Related
Feb 24, 2013
We just purchased a bunch of 3750s, and we need to do EIGRP stub routing and VRF routing
For the newer IOS versions (15+), will I need activation keys?
View 5 Replies
View Related
Feb 12, 2012
using the 55xx as a L3 Distribution switch or even as a Core. By enabling the L3 features does it allow you enabled L3 SVI's for VLAN interfaces or are there interfaces on the daughter card that are used for routing instead?
View 5 Replies
View Related
Nov 29, 2012
how to go about config my bureau connected to HQ and separated by a WAN link of 60mb.
This is my plansplit into halves that is 30 mb for LAN connections, internet and file serving for strictly video streaming, bureaus have routers 2800 conected to HQ HQ has a router 3900
View 1 Replies
View Related
Jan 1, 2012
I have a 2921 router and want to use mpls feature. Right Now we are using c2900-universalk9-mz.SPA.151-4.M1 image but mpls static cross connect” is not working with this image. And will this image(c2900-universalk9-mz.SSA) be worked?
View 2 Replies
View Related
Jan 20, 2013
What features are supported in the image ipservces cisco 3750X-24T-S? Need NAT
View 1 Replies
View Related
Dec 1, 2011
I have a question concerning about how many ospf and bgp route entries does 3945E isr g2 router support?
View 6 Replies
View Related
Mar 29, 2012
some of the features of 6500 are enabled by default and woudn't appear in the "Show run". See the command below and how do I make sure whether these featues are enabled by default or not. Would it appear in the config if enabled?
ip verify unicast source reachable-via rx
ip verify unicast source reachable-via any
storm-control broadcast level 70
what are the difference between the commands below and can they be enabled together.
spanning-tree guard root
vs
spanning-tree loopguard default
vs
spanning-tree guard loop
View 1 Replies
View Related
Sep 10, 2012
I think choose this SWITCH 4506-E and I need running only features L2 Metro, but Idont known what IOS for this!
View 1 Replies
View Related
Mar 21, 2012
We are experiencing output drops on our 3750G-12S (IOS 12.2.55).
I have monitored throughput with MRTG, but it doesn't seem that high compared to that the 3750G is supposed to handle 17.8 Mpps.
The 3750G's are stacked, running ospf, qos, multicast (IPTV) and etherchannel.Is the maximum throughput reduced by stacking or any of the other features?
I don't know if one can estimate what the maximum throughput is per ASIC or per port, but on one of the ASICs that is having drops the peak unicast load is 1.3 Mpps and multicast Mpps is 0.9 Mpps. Total ~2.2 Mpps.
This doesn't seem high at all and I don't understand why the drops are appearing. What I can do to find out the reason for these drops?
View 5 Replies
View Related
Sep 26, 2012
I came across this Multichassis EtherChannel Features when read about information from Cisco Smart Business Architecture.After checking further, knowing that Cataly stwitch 6500 supports this feature.provide information that beside Catalyst 6500, is there any other model of Catalyst switch can support this feature?
View 4 Replies
View Related
Dec 5, 2011
I know this is not a the preferred way to do it, but this just an interim network configuration until the Remote Site gets re-located and reconfigured. I'm trying to bridge and route traffic and hoping the community can offer a review of the sample configuration and/or some ideas to make this a reality.
Existing network is bridged across site-to-site private line (p-2-p) so 192.168.100.0/24 devices exist at both locations. In order to reduce bandwidth consumption across the p-2-p, the 172.20.100.0/24 devices (end user PCs and new to the environemnt) will be routed out a local Internet connection which in turn reduces the p-2-p traffic to just private network traffic for the two networks. That same network requires routing through the 192.168.100.0/24 network in order to access the private WAN connected to the 3900 router with IP 192.168.100.1.
View 0 Replies
View Related
Jun 4, 2012
I wish to use a 1921/k9 as a router on a stick. Inside interface interconnects up to 9 VLAN, and performs the routing. Does the 1921/k9 supports trunking and VLANs (I think it should support 16 VLAN, but I am not shure) or I should choose 1921-SEC-k9? Routing performance is the same both on 1921/k9 and 1921-SEC-k9? (I think I'll use static routes or RIP, it is not a large network)
View 1 Replies
View Related
Jun 13, 2013
i have a gateway router going to the internet....using public IP addresses on both interfaces. starting on Monday, traffic would suddenly stop flowing from the inside of the network going out, though i can still ping the outside interface , but when I log in to the router I am able to ping to the internet. so its like traffic is not passing from the outside int to the inside int. I have a 3900 router. other thing is, when i restart the router it will work for some time and then just stop again....
View 6 Replies
View Related
Dec 17, 2011
I can not connect to the web features when plugged in the router but works fine when plugged in the modem directly.
View 1 Replies
View Related
May 28, 2013
I am in search of a 1 Gig Ethernet WAN module for 2900, 3900 series router.I want to terminate 230mbps link on this module.I found EHWIC-1GE-SFP-CU option but as per service provider it will not support to 230mbps link.
View 3 Replies
View Related
Dec 12, 2010
Am trying to do a dynamic configuration of a 3900 series router (3925 to be precise).For the software and licenses, under the IOS technology Package Licenses, what's the significant of SL-39-DATA-K9 and SL-39-SECNPE-K9? Are they really necessary for the router?
View 3 Replies
View Related
Oct 24, 2011
I am looking for the procedure of the router 3900 series failover. I have got two 3900 series router with the same ISO and other interface cards. What are the main things that I should watch ? Does the standby router takes the same ip of active router if the active router fails ? How should I configure it.
View 1 Replies
View Related
Jan 11, 2013
I recently upgraded from a Cisco 3900 series router to a Cisco ASR1k router. Since the upgrade, I have internal clients who claim they cannot connect to external VPNs. These internal clients are behind a NAT that routes a public IP address to a group of clients with private IP addresses.
How can I ensure that all VPN traffic is able to pass through the NAT?
View 2 Replies
View Related
Sep 26, 2012
Transitioning from 3825 to 3945 (OS is 15.0(1r)M13 c3900-universalk9-mz.SPA.151-4.m4). Turning on FDL on the 3825 was easy but the same command on the 3945 doesn't work.
View 3 Replies
View Related
May 9, 2013
My Cisco 3900 router is not taking the no auto summary command?
View 5 Replies
View Related
Oct 30, 2011
Is there a router (1900-3900 series router) that will support a 100FX fiber connection. We use to use 2800-3800 and 2600-3700 series routers with FX fiber interface now these routers are no longer available and our need for 100Mbps FX is still a requirement.
View 3 Replies
View Related
Mar 3, 2009
Do any of Linksys routers have the recently popular guest network access feature where you can create a password protected or no password secondary network that provides internet-only access to guests and prevents them from accessing your main network (computers, printers, HDDs etc?). Does Linksys's highest end WRT610N have a similar feature that works slightly differently but does the same thing?
View 9 Replies
View Related
Feb 18, 2011
I just picked up an e3000 last night. Set up was performed manually. Flashed to 1.0.04. No issues and I was up in under 10 min.Although I read the user guide, prior to purchase, I admit I did not expect that I would not be able to configure ALL of the router's features and functions from the web based configuration, without using the CISCO Connect CD.Parental Controls and GUEST Access cannot be configured unless you load the Cisco Connect software.While this is not a huge deal, this implementation is clumsy and cumbersome for advanced users. Honestly, I had no disire to install the Cisco Connect software. I was further disappointed to see that it stores the router's password.
My feeling here, let's not ruin a great thing. There are two types of users. One's who need a configuration wizard, and other's who don't. I guess some inroads are being made in the right direction as some GUEST access functions can be made in the web gui on the e4200. I hope this can be further expanded to all "e" series routers in the future. Overall, it works as advertised. Streaming 720p HD video over wireless 2.4Ghz band G only is flawless. This is no different than my wrt54g2, but I'm upgrading to a 1080p player and have read that N on the 5Ghz band is the way to go.
View 1 Replies
View Related
Jul 23, 2012
I have the Linksys/Cisco router E4200. My question is setting up parental control features as specified in [URL] - specifically the blocking of sites based on certain keywords and/or blocking sites based on age groups (child/teen). I do not see this capability in my Cisco Connect software. Is this feature available for E4200 v1? If so, how can I obtain the software?
View 2 Replies
View Related
Nov 11, 2011
For a high end wireless router like the E4200, the parental control features are lacking. The other features and performance of the router are great, but why not provide outstanding router based parental controls? With the latest firmware (1.0.03) no new parental control features were made available. Currently, I can restrict by time, which is useful. I can also restrict 10 websites - which is not useful. I certainly don't want to maintain a list of the 10 most offending websites that I want to block. First of all, 10 is not even close to being enough. Second, and more important, there should be a way to subscribe to some service that automatically updates the list of blocked websites based on content. I would not mind paying for this service if the cost is reasonable. I know that there are software "solutions" for this, but my 6 year old easily found a way around this sort of solution. I have tried many with no success. The only real way to enforce parental controls in a home network is at the router. I would love to this feature available on this high end router. There are a few lower end wireless routers that offer this service, but the other feature set is poor. I want to have my cake and eat it too.
View 3 Replies
View Related
Jul 2, 2011
I have a HQ with two branches, the HQ contains one 3900 ISR router with two WAN connections, the two branche sites each one contains one 2900 ISR wth two WAN connections for each router.
i need to establish a site to site vpn with GRE between the HQ and the two branches, so is it possible to
1-for HQ: i need to configure site to site VPN to the branches using the both WAN connections on the HQ Router like if one site to site vpn is down the other one will be on and works as High Availabilty.
2- same for the branch offices i want use both wan connections with HA in site to site vpn to the HQ.
3-using GRE for routing after configuring IPSEC VPN.
View 1 Replies
View Related
Dec 26, 2011
I have some simple rules on 2 extended lists:ip access-list extended FWINpermit tcp any host 192.36.86.231 eq ftp-data ftp 22 www 443 516 666 671 672 2222permit tcp any host 192.36.86.231 eq 4500 8008 8443permit tcp any host 192.36.86.231 range 5900 5950permit tcp any host 192.36.86.231 range 33434 33550permit tcp any host 192.36.86.241 eq ftp-data ftp 22 www 1935 2195 3306 8888permit tcp any host 192.36.86.241 range 8080 8090permit tcp any host 192.36.86.241 range 33434 33550ip access-list extended FWOUTpermit tcp host 192.36.86.231 any eq ftp-data ftp 22 www 443 516 666 671 672 2222permit tcp host 192.36.86.231 any eq 4500 8008 8443permit tcp host 192.36.86.231 any range 5900 5950,The issue is that 192.36.86.231 can access internet, and 192.36.86.241 can not.Is there a way to troubleshoot 192.36.86.241's connection/packets flow?
View 1 Replies
View Related
Jan 12, 2012
I have a cisco 1841 router and want to run BFD i think it needs IOS 12.4T..It has currently 12.4 but no T does the "T" IOS have mroe features?
View 1 Replies
View Related
