My friend has a dell d600 with the built in intel wireless card. All of a sudden his computer no longer shows that there is a wireless interface in the computer and he needs this computer for work. I'm thinking the driver may need to be reinstalled but I'm not entirely sure if it's that or a hardware error that's causing this malfunction.
View 3 RepliesThe wireless on my laptop keeps dropping out. When I first got it it was fine, but after a while I started experiencing problems on every wireless network I connected to. Most of the time it would connect, but after around 10 minutes or so, the connection would drop out and the wireless card has to be "reset" so I can connect again. Otherwise I have a little yellow triangle over my network signal strength bars. I've updated to the latest drivers (14.2.0.10) but it was no luck.
This happens with every wireless network and I know it's not the network because my old Vostro 1500 is running just dandy on all of them.
Can I install an Intel 6235 wireless card in my 14z (non XPS)?
View 2 Replies View RelatedFor some reason my card stopped working, I tried reinstalling the driver, fn + f2 (to activate my card from my keyboard), and a few others basic thing, nothing is showing up, where I am with other PC I can see at least 5 networks. my PC gets nothing,im running vista 32bitintel pro wireless 3945ABGdell inspiron laptop 6400I also tried a fixit microsoft tool for network, didnt work,Im on the net now using wired cable from my router, and its ok but I need my wireless on the road------------I have uninstalled reinstalled the driverI did a fresh format last weekI cant reset TCP IP. I get access denied, even in safe modeI did use many different use for removal of malware on my pc. im using avgchkdsk found no problems*** I did try alot of things, what can be doneWindows IP Configuration
Host Name . . . . . . . . . . . . : john-PCtopPrimary Dns Suffix . . . . . . . :Node Type . . . . . . . . . . . . : HybridIP Routing
[Code].....
My laptop has Intel(R) Centrino(R) Wireless-N 1030 internet card but the computer can not connect to the modem properly, the speed is always not the speed that I purchased
View 1 Replies View RelatedI have just got my new xps 17 and opted for the 6230, It only gets to 20 meg download speed, I can insert my old usb N adaptor and get the full 50 meg. I was on the phone for 2 hours last night with Dell, they had remote access and tried lots of things to improve the problem.
Finally once they saw that my old usb adaptor was much faster, they said a technician would call me back today betweek 12pm and 1pm or 4.30pm.
Mine studio 1555 with intel core 2 duo P8700 [URL] processor and intel wifi 5100 agn card stopped connecting to router since last week. After searching a lot I found out that the Intel has stopped supporting 5100 for windows 8. Is there any way possible to use the same adapter with compatibility drivers on windows 8?? I have searched a lot but couldn't find much. All the new intel cards like "Intel Centrino Wireless-N 2200", n6300 are of 22nm while my processor is of 45nm. So will the newer card work with my processor.
View 1 Replies View RelatedHow do I disable the power management feature that slows my NIC down when I am on battery power?
I have a dell e6500 with a Intel 82567LM Gigabit LAN card that always connects at 10Mbps when I plug in the ethernet cord when I am on battery power, I've tried using different routers (I have two gigabit routers and one 100 mbps router)... it still auto-negotiates at 10 mbps I've tried using different cat6 cables, it still auto-negotiates at 10 mbps.I've checked the drivers, I have 10.0.6.0, which is the latest from the support.dell.com website.
However, the minute I plug in the laptop, the NIC connects at the proper speed. Essentially, when the laptop is using battery power, the NIC decreases it's speed to 10 mbps. When I plug the laptop in, the speed jumps up to what it should be (either 100 mpbs or 1 Gbps, depending on which router I'm plugged in to).
So, how do I disable this feature? I want to connect at the maximum possible speed, regardless if I am plugged in or not.
what other cards are compatible with XPS 13 Ultrabook? Like so many people, I have been having a problem with my wifi when the computer is used a little far from the router, and thinking about buying a new wifi card for a replacement (which is silly, and I shouldn't have to do, given my computer is brand-new and cost more than £1000, I know... but I don't seem to have much choice). I've tried everything that has been suggested in the Dell forums, and elsewhere, including those on the Intel site. But nothing has improved my connection even a bit.I have Windows 8 (64-bit). And it currently has an 'Intel Centrino Advanced-N 6235' wifi card that came with it.
View 2 Replies View RelatedI have just taken delivery of a new Inspiron N5110 with an Intel Centrino N-1030 wifi card. I also have two dual band routers (LInksys WRT600N) in different locations in the house.
My problem is that the laptop is detecting my routers Wireless-G signals but NOT the Wireless-N signals. I have checked to ensure that the N-1030 card has 802.11n Mode set to Enabled and have also tried both setting under "802.11n Channel Width for band 2.4" (i.e. Auto and 20 MHz Only) with no success.
My routers are configured with the Wireless-G signal only on 2.4 GHz and Wireless-N only on 5 GHz. I found this to be the best setting to avoid interference from neighbors wifi and cordless phones and have been happily using Wireless-N with my other Dell laptop with no problems (XPS M1530 with Intel 4965agn wireless card).Does the N-1030 card not work with 5 GHz Wireless-N?
I think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies View RelatedD610 - Intel PROSet
tab: Advance>>"Use Windows to manage WiFI" (F10)
When in Windows MODE the view network in range does NOT pick up anything even though the connection still exists.
How do I configure to see the networks in range ?
I have a Vostro 1500 and cannot connect to a wireless network with a dell 1395 WLAN minicard os XP home, what are possible solutions?
View 1 Replies View Relatedmy Intel wireless card keeps losing the connection. Until a couple of weeks ago it would be fine for roughly the first 20 minutes then the connection would just completely drop out and the only way to get it back again is to go into the network and sharing centre, disable the network card and then reenable it. Most of the time this works, but again for only the first 20-30 minutes, then I have to do it again. Occasionally it works for for longer but that's a rare occasion.Now not only does it do this, but also, if I put my laptop into sleep, sometimes when I turn it back on again the card will not connect to the network and I have to do the same disable and enable process.[ODE]
View 7 Replies View RelatedWell my computer is a Dimension 4550, and i bought it about a year ago. i re-installed the OS for other reasons. I have verizon DSL, and it worked perfectly before the re-installation. after, the connection was working, but I was missing the driver for the "INTEL Pro/100 VE Network Connection". I can't seem to find the driver.
View 4 Replies View Relatedhow to get at the configuration interface for the "built-in" Twonky server on the E4200.Specifically, I'm trying to figure out how to get to the "clients.db" file and the area of the UI where I can configure the receiver settings. I'm getting the dreaded "unknown file format" message when streaming mp4 files to my Samsung BD-C6500 bluray player. Installing Twonky on my laptop and working with the problematic files has shown that the solution is a simple matter for BD-C6500 understand how the files are encoded.
View 9 Replies View RelatedI know now that this is a Desktop motherboard, officially not supported for Windows Server operating systems, but I would still like to get it to work. I've confirmed that the motherboard network works in WinXP (Intel 82579V Gigabit) and typically the 32-bit Windows XP drivers work on Server 2003 as well. Several of the other drivers have installed just fine, but the network driver install package fails with "No Intel Adapters are present."
I am trying to install Windows Home Server v1 (based on Windows Server 2003) on this box and just want to get a basic network driver up and running. I've checked the BIOS config, and Device Manager shows a yellow question mark by "Ethernet Controller". The ID is:
PCIVEN_8086&DEV_1503&SUBSYS_20408086&REV_043&11583659&0&C8 but I don't really know what to do with that...
I have integrated Intel 82577LM Gigabit Network Controller installed in my E6510.after installing updated driver from Intel and running hardware test it stopped working (displays "This device cannot start. (Code 10)" in driver details page).Also it says that device is 82577LC (it used to be 82577LM).
Intel hardware test displayed "EEPROM Failure" message. Looks like this test damaged network card firmware somehow.How do I restore/reset EEPROM of the network cad?i also tried deinstalling and reinstalling previous version of driver from Dell - no luck.
Replaced the HDD in my wife's Inspiron 1420, Vista, Intel dual core T7250s
Broadcom 802.11n adapter
Kept all the disks shipped with the lappy, Prepped the HD per the media rules, loaded windows and the mediadirect and the driver resource CD.. they all had autoexecs and seem to run fine. Failed to connect to the net.. checked it out on device mgr, found the code 10 fail.. All other drivers seemed to have loaded..
tried to update the driver.. it said it already had the correct driver. - fail
DLed the Broadcom driver to a thumb and installed it - no difference. Rebooted.. several times during all this.
Read here it might be install order - thought I might try it manually. Looked for Intel T7250 drivers.. "not currently available" here.
The problem is that it always stays around 121-150mbps and sometimes 270mbps(beside router). here is my wireless settings on my router
router setting 1: [URL]
router setting 2: [URL]
network card setting:
802.11n channel width:auto
802.11n mode:Enabled
Ad-hoc channel:11
Fat channel intolerant:Disabled
Roaming aggressiveness :Medium
Throughput enhancement:Disabled
Transmit power:Highest
Wireless mode:802.11a/b/g
My only issue at the moment and im not sure if im doing something wrong but the wireless card is Intel® Centrino® Wireless-N 1000 and it says it can do Wireless N Connection but im not able to get it connected to the wireless N network. When i go in to view the options it gives for Wireless Mode it says B/G or just B or G. Now up top it does say 802.11N Mode and has the option for Enable and Disable and its Enabled. I have uninstalled the driver and intel software and reinstall everything a few times but no resolve. How i need to get the card to connect to the N Network?
View 5 Replies View RelatedI have a two year old Dell, an XPS Q740 (from the system info) Intel i7 CPU. Works fine but I've recently upgraded my router to an N standard with dual channels operating at 2.4ghz and 5ghz, so I'd like to improve the the network options for my machine. Looking at the device manager, it says I'm using an Intel WiFi link BGN 1000 which operates at 2.4ghz.
What card if any I can install to bring about a speed improvement. Fiber broadband is also due in my area soon so I want to take advantage of this.
I got DELL inspiron 1012 with built-in mini wireless card in windows 7 starter. The laptop could detect the card and I could connect to the internet until when I downgraded to windows XP service pack 3, and then it could not detect the card anymore. I downloaded all of the driver in DELL support site and installed them to the laptop but it sitll could not "see" the card. I checked in the Device Manager and did not see the folder "Network Adapter" at all.
View 3 Replies View Relatedtell me if the Dell 1502 wireless n mini-card will function on a wireless network working on a/b/g bands?
View 1 Replies View RelatedI recently install xp pro and update all necessary drivers for the computer.I also plug-in another network card, this nic is working but seem browsing the web is slower than the original network card comes with the motherboard. Before both network cards show up in (my network places). Now the network card comes with the motherboard doesn't show up, only the network card connection just installed.
I check the device manager both of the network adapters are there, check both of box that say place LAN on taskbar.This could be i have find and install revised intel chipset and lastest BIOS for the pc, now the hard drive activity LED doesn't lit and the ethernet controller has issue. Note when I plug in the cable to ethernet port (one built with pc) there's show both activity light and connection light, but can't connect to the internet.
pc info:
winxp pro sp3
pentium celeron
256 mb of memory
manufacturer: gateway
I got a Studio 1535 Laptop which comes with a Broadcom WiFi card that is named "Dell Wireless 1397 WLAN Mini-Card" in the Hardware Manager.
I tried to connect to my ZyXel WiFi router but though i had it all configured right, Windows would always come up with "you entered the wrong key". After playin around for some time i figured out that everything just works fine when i switched my router from WPA-PSK to WPA2-PSK. My router features both WPA-PSK and WPA2-PSK but since my other PC does only support WPA-PSK the router is set to that and i want it to stay that way. I just don't want to buy new hardware for all my other computers.
So is this WiFi card strictly incompatible with WPA-PSK? Does'nt make any sense to me because WPA2 works just fine! Normally they are downwards compatible aren't they? (Moreover, when setting up a connection i can choose WPA-PSK from the dropdown menu.
I have a new brand dell inspiron 1525 laptop and everytime i boot i get a message "Dell wireless WLAN card wireless network controller stopped working and was closed.
A problem caused the application to stop working correctly.Windows will notify you if a solution is available.I use windows vista premium and dell wireless 1390 802.11g.
I cannot install the drivers for my TrendNet TEW-423PI network interface card. I am running Windows 7 64-bit with an Intel i7 2700k and an Asus motherboard. I have tried installing with the card already in the computer - no luck. Card out of the computer install and then shut off and put in - no luck. The instructions that come with the card say that after you install the program that instantly runs from the CD provided you should shut off the computer and install the card and when you turn the computer back on the drivers will install automatically. It has failed to do so and although I pulled all possible drivers from TrendNet's site it still stubbornly refuses to even recognize that there are drivers for it to install.
View 2 Replies View RelatedGonna use a Dell Precision T3500 with Win7 Pro as a file server for 6 PCs. Would it be worthwhile to pick up an Intel CT pcie x1 NIC (EXPI9301CTBLK) for under $40 or just go with the integrated Broadcom 5761?
View 3 Replies View RelatedI don't like the wifi installed in my laptops.I am thinking about switching them to intel 6300 and maybe one in bigfoot 1102 or 1103. My home router beeing 3x3 compatible I should see improvement.
Anyway I am wondering if it works easily or if I have to install some antennas inside which would be a big mess.
I have a Dell Intel 3945abg wireless. Its work great for the time I've been using it...until today. I have the red cross on the icon and it will not enable even though everything else checks out. I've uninstalled and installed the drivers and it is recognized.
View 1 Replies View RelatedJust purchased refurbished Inspiron 15 Intel N5050. I know about Function-F2 and the wireless switch is on, but I can't get any wireless to work. I have tried to download drivers but they can't find the wireless card either. However, when I put the service tag in, it says I have the wireless card. The service tag is <ADMIN NOTE: Service tag removed per privacy policy>.
When I go to Device Manager, other "other devices," Network Controller shows up as not having a driver installed. However, the network adapter shows up just fine.
I have new Inspiron 1720 running Vista with the Dell wireless 1390 WLAN mini-card. I will be connected to the wireless network just fine, but it will then disconnect. My problem is I cannot re-connect to it without having to do a total restart. I go to the place to refresh the list, and it finds nothing. I ask it to repair the network, and it can't becasue it cannot find a network. I have at least 4 other networks in the area that I can normally see, and none appear when I hit the refresh button. But I totally restart the system, and everything works fine again (until it drops again).
View 13 Replies View Related