Connecting Printer To Belkin N150 Wireless Router?
Nov 26, 2012
I can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router?
View 2 Replies
ADVERTISEMENT
Nov 27, 2012
I can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router? Any other ways to access this printer from my PC which is connected to LAN via ethernet?
View 1 Replies
View Related
Nov 26, 2012
I can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router? Any other ways to access this printer from my PC which is connected to LAN via ethernet?
View 3 Replies
View Related
Nov 26, 2012
How can I set up a N150 router so that I can access a WiFi printer (Canon) with my laptop and/or iOS device? No Internet involved - just want to wirelessly print to my new Canon printer.
View 1 Replies
View Related
Sep 4, 2012
My router is not connecting my laptop to the internet. The icon at the bottom states that I am connected and have an excellent connection.checking the router, starting and restarting router but still no connection.
Windows XP
HP laptop
Verizon ISP
View 3 Replies
View Related
Dec 11, 2012
Anyone having problems connecting N150 router to a 1st Generation Nest Thermostat? Nest support says it's a problem with them not conforming "to the TCP/IP specifications around Network Address Translation (NAT) timeouts and are disconnecting Nest too soon". Any way to work around this problem until/if a firmware update fixes it?
View 3 Replies
View Related
Mar 2, 2011
I'am having problems when connecting to the internet. I'am running Win7 64-bit and i have Belkin USB wireless adapter( Belkin surf N150) When i first bought the adapter it didnt connect to internet, so i though it is not working and i got it replaced. I got the same problem with the second one as well, and then i have changed the wireless mode on the device manager from: IEEE 802.11b/g/n to: IEEE 802.11b and eventually i have connected to internet without any errors, but in this mode the internet is unbelievably slow which is very slow when compared to another wireless mode where i have changed it from. So my question is why i can't connect to internet IEEE 802.11b/g/n in this mode? The weird thing is that some times it connects to internet with no error and dissconnects again in a short while. Also when the windows tries to repair it, i get this report:
Windows Network Diagnostics Publisher details
Issues found
Problem with wireless adapter or access pointProblem with wireless adapter or access point Not fixed
Refer to Windows Help and Support for more information about wireless connectivity problems Failed
Reset the wireless adapter Completed
Investigate router or access point issues Completed
[code]....
View 17 Replies
View Related
Nov 2, 2012
Uninstalled McAfee. Installed Frontier Secure, which uses the Windows Firewall. Received Windows Security Alert message that my Belkin USB Storage Center (where the printer is listed) was being blocked, and would I like to allow access. I selected "Allow Access". Printer has not been connecting all week. No error messages - it tries to connect, and then just stops. Can't find issues with the router or the printer - only with the firewall. Everything looks the way I assume it should - the printer is listed in the Belkin storage center. The Belkin storage center is listed in the firewall. There is no tech support for the firewall. There is no tech support for the printer.
View 4 Replies
View Related
Nov 7, 2012
iI downloaded belkin n150 router where do I find network security key
View 1 Replies
View Related
Nov 7, 2012
iI downloaded belkin n150 router where do I find network security key
View 1 Replies
View Related
Jun 20, 2012
I'm trying to set up my desktop using windows xp and a wireless belkin n150 f9k1001 router to connect to a wireless network that is being sent from a mac with some tp-link router so that I can connect to the internet the isp is bell aliant. I'm not entirely sure how to go about this or if it's possible I've tried the worthless tech support and setting it up as an access point but I don't really know what im doing.
View 1 Replies
View Related
Jan 30, 2012
I just installed a Belkin N150 wireless router to use with our iPhones which it is working great. But I also have my desktop pc attached to the router as a wired connection and the down load speed on the desktop pc has decreased dramatically. for example it took 10 minutes to download a 30 sec video.Before I installed the Belkin router I had no downloading issues. This is on a dial up modem.
View 5 Replies
View Related
Dec 17, 2012
I bought "Belkin N150 Wireless Modem Router" and while installing noticed that the ADSL slot is too short that does not fit the LAN chord, instead fits the telephone chord. How do I fit the LAN chord fit in the ADSL slot? Any alternatives? My ISP comes with a LAN chord and is connected directly to my PC.
View 3 Replies
View Related
Dec 20, 2012
N750 DB USB printer not connecting. I'm currently running a Canon MP480 multi-purpose printer connected through USB to the N750 DB router. I have both the printer driver and Belkin USB Print and Storage Manager software installed on a desktop PC that connects wirelessly to the router. The Belkin print manager software "sees" the printer, but when I try to connect it says please install printer drivers. I've installed and re-installed these drivers a few times, with no effects.
View 14 Replies
View Related
Dec 10, 2012
I have an iMac running 10.4.11. I would like be able to print through the router. I now have my PC laptops doing so. What voodoo do I have to do to make the iMac work with it?
View 3 Replies
View Related
Apr 30, 2012
I recently bought a router so I could connect my Toshiba laptop to the internet. After I connected the ethernet cable to the router and plugged everything in, I installed the program from the CD that it came with. After the whole process, it says "You are now connected to the internet!". Yeah well when I try to get on the internet, it suddenly takes the connection off. On my wifi status, it says it's not connected anymore. When I try to connect again, it says I'm connected, although if I get on internet explorer, it takes off the connection again. Though when it is connected, it says no internet connection available although I am connected to the router. So basically, I'm connected to the router, but not the router to the internet.
View 4 Replies
View Related
Jul 12, 2012
I have just bought a Belkin n150 router. Connected it to my modem and PC and I'm recieving internet. Connected my phone and laptop and getting wireless.The issue, however, is that I cannot login to the router page. The login says to leave blank for default, but it gives me an incorrect password error. I have tried resetting using the button located above the power cable to go back to defaults, but I continue to recieve the error.
I have tried a all the other usual default passwords, password, administrator, admin, etc.I've gone through pages of google search results and found nothing. Have I missed something obvious or did Walmart sell me a defective router?
View 1 Replies
View Related
Apr 14, 2012
How do I get my verizon usb mobile modem to work with my wireless router? My router is a Belkin N150.
View 1 Replies
View Related
Oct 22, 2012
My N150 router V1 is blinking orange, reset tried many times but nothing works, its less than a year old but i dont have the receipt any more.
View 1 Replies
View Related
May 8, 2012
I have one desktop PC at home, Windows XP, and have a Time Warner wired modem for internet. I work from home and connect to my office computer through Remote Desktop Connection.I purchased a Roku2 video streaming player and bought a Belkin N150 wireless router in order to get the signal from my desktop computer out to the living area where the Roku is located. The connection with the Roku is perfect. However, my remote desktop connection now disconnects constantly and internet browsing on the local computer is very slow and choppy.The configuration I used is 1) Belkin ethernet wire from Belkin to back of modem 2) modem ethernet wire from Belkin to computer.If I remove the Belkin and put everything back the way it was, all is fine ... but, of course, we then have no Roku.
View 2 Replies
View Related
Apr 10, 2013
I recently had trouble with my Comcast Xfinity internet service and called to have them send a refresh signal. I was up and running again with my ethernet, but my wireless service using a Belkin N150 wireless router hasn't worked.From everything I had read I needed to do a hard reset of the Belkin N150 router and then reconfigure it's settings. Well I did the hard reset and power cycled everything, the modem, computer and router. I then plugged in everything again and connected the modem to the WAN on the router with one cable, and the computer to the LAN on the router with another cable. (I am using a Macbook Pro operating with Mac OSX). Now I cannot connect to the url...to configure the settings on the router at all!
I think the problem has something to do with my IP address. I opened the network settings and saw that my IP address is 50.138.25.x while my Subnet Mask is 255.255.254.0 and the router is being listed as 50.138.24.x. How to change this IP address to get my router connected or could it be another problem?
View 8 Replies
View Related
Jan 22, 2013
I have a G Wireless F5D77634-4A-H V2 router and an N150 Micro USB Adapter on a HP Desktop. The Desktop cannot see the router.
View 1 Replies
View Related
Mar 27, 2011
My WinXP Home PC won't connect properly (limited connectivity/no internet) via ethernet cable to my router (Belkin N150). Ipconfig /all shows the IP address as 169.254.117.71 but this is determined by an entry in the registry at HLMSYSTEMCurre....'DhcpIPAddress' - REG_SZ - 169.254.117.71. Also listed at 'IPAutoconfigurationAddress'. My laptop connects fine plugged into the same port getting it's IP automatically (192.168.2.2) and getting internet fine. I've tried adding a DWORD entry 'IPAutoconfigurationEnabled' = 0, also tried deleting the 2 values.Tried setting the IP manually to 192.168.2.6 - limited connectivity goes away but I get no internet connection from the router nor file sharing.
View 6 Replies
View Related
Oct 16, 2011
I have recently wiped my hdd and installed WinXp, I use to have vista but a crash occurred. I have WinXP SP3 with a Belkin Connect N150 connected to a Arris Telephony modem from Comcast. My setup use to work on vista. I've ran belkin setup from the disc multiple times and it gets to the part where it says connect and make sure cables are connected. All cables are connected, but my router has a solid amber light. I can access arris through wired internet, but I really want my wireless to work.
View 3 Replies
View Related
Jun 3, 2013
I cannot get my belkin n150 wireless router to connect to my laptop or ipad - wireless connection was working but stopped - so i attempted to re-configure the ip protocols on the router using the 198.168.2.1/ password - changed the ip setting on the belkin page but did not reset or set address (DHCP).
View 1 Replies
View Related
Jan 21, 2013
I have a Dell Inspiron 1525 laptop. It will not connect wireless to my Belkin N150. It use to, then one day it quit. I have an HP laptop and it connects wireless just fine. So I don't think it is the router. I have tried to reinstall the router. And the PC tells me there is a network available, but it will not connect. My question is... Can the wifi card be bad? Is there a key combination that might have been put in by accident?
View 1 Replies
View Related
Mar 5, 2013
I bought my own modem, a Motorolla Extreme something or other, is a DOCSIS 3.0. My router is a Belkin N150. When I plug my desktop computer directly into the router, I get speeds upwards of 50Mbps. The wireless, however, gets about 0.15Mbps download, but as much as 12Mbps upload.
I know it's not computer specific, because I plugged my laptop directly into the modem and got the full speed. AND I put a wireless adaptor on the desktop and got the slower speeds.I live in a densely populated area and there are 27 other (visible) wireless networks available (all locked, unfortunately. Otherwise I wouldn't be in this situation in the first place). So I tried every channel, doing a speedtest with each, and I got almost identical results each time: 0.12-0.17Mbps download, 11-13Mbps upload. I can't imagine that getting only 0.15Mbps could be a result of a channel being clogged, but I tried it anyway;
View 2 Replies
View Related
Nov 12, 2011
My wife has a COBY 10" netbook running Windows X home SP3., we use a NETGEAR N150 Wireless Router and for some time now, whether she boots from a cold startup or "wakes" this laptop, it has lost the network connection. It gets the "Wireless networks detected" message, sees our Security-enabled wireless network, but instead of automatically connecting, it always asks for the network key. I have a second laptop (Toshiba Qosmio) that I only use some othe time, primarily for vacations, and when I turn this on it always connects right to the network, even if we've been away and connected to a hotel network. I never have to use the key for our home network once I get back home.
She's getting pretty fed up having to constantly put in the network key on the COBY, this should be a "set it once" and it should remember it should it not? I'm sure it used to, have I missed something?
View 4 Replies
View Related
Jan 2, 2013
i have a Belkin N150 F6S4050 v2. I recently just upgraded to Win 8 Pro and was wondering when there will be support for this product.
View 1 Replies
View Related
Sep 27, 2011
I have a new n series Belnet wireless router that can take a usb printer. I have a Lexmark 2200 Series 1 Printer (with usb connection). I have used this printer with my laptop (runs Windows xp) by connecting the printer usb directly. I have also connected my laptop to the wireless router. I have plugged the printer into the wireless router's usb port. Is it possible to access the printer this way? I do not know what I should do next. The laptop cannot access the printer through the wireless.
View 5 Replies
View Related
Jan 4, 2011
Have a non-wireless printer (HP F4280) and non-wireless Desktop (Dell Dimension 2000). Just added an HP G62 wireless laptop and Cisco Valet+ router. My problem is I want to make the printer wireless but their is only one USB port and no ethernet port. If I put an adaptor into the USB port on the printer to make it wireless, I will of course loose access from my dektop. Can I put a splitter into the printers USB port and use an wireless adaptor plus the cable to the desktop?
View 5 Replies
View Related
Feb 5, 2013
have a home Sony VAIO Computer running XP Media Center Edition, Belkin Wireless N Router, HP B209 Wireless printer, 1 year old Lenovo laptop, and an iPhone 4s.I can't make them all play together.I noticed yesterday that my iPhone hadn't been connecting to the WiFi for several days, so I tried to see what might be going on. I tried to force pair the iPhone by turning off Data Connection, which usually forces the WiFi, which it did, but then when I went to a webpage it wouldn't load even though wifi was showing full signals.I then booted up my lenovo laptop, and it connected to the internet and worked like a charm. Then my iPhone4s started working again. Why not now finally set up the wireless aspects of my HP B209 that I've never used, so I can print from my laptop wirelessly, which I've always wanted to do.So I was able to setup the printer after adding the MAC address of the printer to my belkin router by going to the IP address for the router and adding that specific address, I changed NOTHING ELSE.Internet on laptop not working now. It shows my wireless network with full bars in range, but when I go to connect it simply says it cannot connect, right away. I check my phone, wireless GONE again! I tried to force pair the phone, no dice. I "forget the network" on my phone, it still shows available, I connect put in my password and it immediately denies me, I tried un-plugging the router, restarting all computers, un-plugging router -and- restaring all computers, turning off the printer, repeating all previous steps, and finally I went and deleted the MAC address I added to the router, and all of the above did nothing to fix the solution.
View 4 Replies
View Related
Jun 3, 2011
How to connect a Brother wireless printer to the Belkin Surf N300 wireless router? i tried a few times and it wont connect.
View 1 Replies
View Related
