Netgear N150 - Laptop Not Connecting To Wireless On Wake Up?
Nov 12, 2011
My wife has a COBY 10" netbook running Windows X home SP3., we use a NETGEAR N150 Wireless Router and for some time now, whether she boots from a cold startup or "wakes" this laptop, it has lost the network connection. It gets the "Wireless networks detected" message, sees our Security-enabled wireless network, but instead of automatically connecting, it always asks for the network key. I have a second laptop (Toshiba Qosmio) that I only use some othe time, primarily for vacations, and when I turn this on it always connects right to the network, even if we've been away and connected to a hotel network. I never have to use the key for our home network once I get back home.
She's getting pretty fed up having to constantly put in the network key on the COBY, this should be a "set it once" and it should remember it should it not? I'm sure it used to, have I missed something?
View 4 Replies
ADVERTISEMENT
Jan 13, 2012
I bought my dad a Netgear N150 DGN1000 Wireless ADSL Router to replace his D-link router which kept dropping the wireless signal. I have established a wired connection and my ipad, iphone and his old laptop connect wirelessy to it without any problems but I just cannot work out why his laptop won't connect to the internet.It recognises the wireless signal and it says its connected and that the signal is excellent but when I try to go on the web or check emails it just won't work.I've tried deleting all his wireless networks and starting from scratch but don't know what else to tryHis PC is running windows Vista
View 9 Replies
View Related
Dec 19, 2011
basically we got sent this new router from Orange (our ISP) and we have had problems with it for the last week. The router model is the Netgear N150 DGN1000. Sometimes I connect it will be absolutely fine, but then the next time I log onto my laptop it can't identify the network, it says connected but doesn't have the globe in the bottom right hand corner of my screen. Then we have to reset the router a few times everytime until it recognises it, even though the settings are saved when we connected last time. It is the same with my sisters laptop. We both have Atheros network adapters so that may be a compatability issue with the router, but my brother connects fine on his everytime. A similar problem occurs with modern warfare 3 on my ps3, it won't let me sign in to playstation network half the time and keeps saying NAT type failed, even though NAT is enabled on my router. get this problem sorted and to get a consistent network connection that connects every time that would be great. We changed the security type to WEP on it a few days ago from WPA and that meant we could sign into modern warfare 3 some of the time rather than never, but we are still having issues.
View 8 Replies
View Related
Sep 4, 2012
My router is not connecting my laptop to the internet. The icon at the bottom states that I am connected and have an excellent connection.checking the router, starting and restarting router but still no connection.
Windows XP
HP laptop
Verizon ISP
View 3 Replies
View Related
Feb 11, 2012
I purchased a New Netgear N150 wireless Router 2 weeks ago and now my internet on my laptop keeps going down.. As Far as I can tell When it drops its still connected to the Wireless network.. it just says local only and Gives me the limited connectivity warning.. When I diagnose the issue it tells me a number of different things and it tells me to renew the IP settings and sometimes that will work and sometimes not.. The laptop is a HP Pavilion DV9000 with all original hardware.
View 1 Replies
View Related
Jul 12, 2011
I have a wireless router Netgear WNR1000 N150. I am wondering if I can use it as an access point/ repeater, and if I can, how to set it up. The modem provided by the ISP is in the room with the desktops; can I place the wireless router in a room
View 2 Replies
View Related
Mar 4, 2013
How to change security on Netgear N150 wireless router ( set it to no security)?
View 1 Replies
View Related
Mar 7, 2012
my netgear n150 router can not send wireless signal to devices.what is wpa or wps. how can i find my wireless user name and password. does paying 80.00 dollars to netgear solve problem.
View 1 Replies
View Related
Sep 16, 2011
I am trying to set my NETGEAR N150 DGN1000 .I can connect to the router via wireless but no Internet.Theh INTERNET PORT indicator on the router is goes to OFF mode.Before I try this I had Internet with the same line with a different router..
View 3 Replies
View Related
Apr 28, 2011
Dell 8600 centrino intel pro wireless lan 2100 won't connect to netgear n150 wnr1000. Running 802.11b band it sees wireless network but won't connect. I have 2 other computers connected to network so it works.... I don't know if Netgear n150 is compatible with 802.11b band...
View 1 Replies
View Related
Dec 16, 2009
I have a new WUSB600n V2 Dual Band using Driver 3.0.1.0 on Windows Home Premium 32 bit. My problem is that whenever I put my laptop into sleep mode, upon waking it up I get a USB not recognized, and have to remove and reinsert by 600N device. Even if I log off before putting my laptop into the sleep mode. I'm fairly sure I have the latest driver update, but can't be sure.
View 9 Replies
View Related
Nov 26, 2012
I can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router?
View 2 Replies
View Related
Apr 13, 2012
I have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
View 2 Replies
View Related
Nov 27, 2012
I can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router? Any other ways to access this printer from my PC which is connected to LAN via ethernet?
View 1 Replies
View Related
Mar 20, 2011
I have a DVR connected to CCTV cameras that I would like to connect to my computer via Ethernet and a Netgear N150 router which also handles my broadband.
A program called VideoViewer is installed on the computer which works with the DVR to view images on the computer via ethernet.
Funny thing is that it works with a Zoom router, but not the Netgear There must be settings on the Netgear that needs changing
View 9 Replies
View Related
Jun 3, 2013
I cannot get my belkin n150 wireless router to connect to my laptop or ipad - wireless connection was working but stopped - so i attempted to re-configure the ip protocols on the router using the 198.168.2.1/ password - changed the ip setting on the belkin page but did not reset or set address (DHCP).
View 1 Replies
View Related
Jan 21, 2013
I have a Dell Inspiron 1525 laptop. It will not connect wireless to my Belkin N150. It use to, then one day it quit. I have an HP laptop and it connects wireless just fine. So I don't think it is the router. I have tried to reinstall the router. And the PC tells me there is a network available, but it will not connect. My question is... Can the wifi card be bad? Is there a key combination that might have been put in by accident?
View 1 Replies
View Related
Aug 2, 2011
The laptops in my flat are wirelessly connected to a Netgear N150 Wireless router and the connection is forever going from little to nothing. I've tried resetting everything, getting Orange to replace the router (a new Netgear N150) but still nothing. I've tried changing channels in the past but never seems to last. I can't work out if another wireless router in another flat is chomping into our connection
View 14 Replies
View Related
Jun 3, 2011
My brother just updated the firmware on my Netgear N150 router. My computer shows my wireless network and shows full strength, but says unknown error when I try to connect. It does not appear to save the network password (WEP). My bro reverted the firmware, but still no go... Ethernet works fine, but unsure if it is limited to onmy my wifi. The Error Mesage reads: Wireless association failed due to an unknown reason
View 10 Replies
View Related
Oct 19, 2011
I have a Netgear N150 Adsl router with Orange and the internet light is constantly red and i have no internet connection i can connect to the router but have no ip address.
View 1 Replies
View Related
Mar 22, 2012
I have just picked up an ADSL Netgear N150 DGN1000 router as my old router (just some branded old thing from my ISP has started playing up a bit due to age more than anything else) but for some reason it is not seeing my internet connection at all.I've reset it factory default twice and connect to it wirelessly just fine, including accessing the router's setup pages and whatnot. I was going to update the firmware from in there.. but that needs the connection to the internet as well.
My ISP is BE Unlimited (UK ISP) and their old branded modem connects again immediately when I plug that back in so I know it's nothing to do with any of the cables or filters, etc.One thing I have noticed is that on the box for the new router it does say Orange Retail (another UK ISP) on one of the barcodes but the router itself isn't branded, so I don't see this could be a problem but figured it was woth mentioning.
View 1 Replies
View Related
Oct 10, 2011
I am trying to set my NETGEAR N150 DGN1000 . I can connect to the router via wireless but no Internet.
Theh INTERNET PORT indicator on the router is goes to OFF mode.
Before I try this I had Internet with the same line with a different router.. I am not too sure what's wrong with this.. Could any one come up with a possible solution..
View 5 Replies
View Related
Sep 3, 2012
I have a router and its settings can be accessed by going to 192.168.1.1, I also know that there are other users that are able to access this page and change the settings when they connect to the wireless router. What I want is to block the wirless router page on computers that connect to my wifi except for 1 computer which would be mine. I've tried to put the password but to no avail the password is easily guessed or cracked and settings are changed. But is there a way to block the Wireless router setting page on computers that connect to the wifi network?I have a Netgear Wireless Router WNR1000v3 N150.
View 7 Replies
View Related
Jul 9, 2012
I've got a windows server 2003 machine which access internet over a Netgear N150 router also I've got an static IP, now internet is working properly even I can ping my machine from a remote machine.Here starts the real problem, I've shared few folders which I can't access from any remote machine not in my LAN.Although I could access my server through remote desktop and everything else is working fine, I've opened port 445 on router even that didn't worked also Windows firewall is OFF.Now when I try to browse my server through \myserverip it shows me a blank window but when I tried to access it like:
\myserveripsharedfolder it gives me error which reads something like
"File and printer sharing seems online but server is not responding on port 445."
View 10 Replies
View Related
May 14, 2011
Im having a horrible problem with my internet connection where I cannot use any kind of download site such as filefront or anything really.The main problem is once a download gets going (any filesize above 1MB) the connection will stall out and stop downloading until the server says cannot download or if available, i pause and start the download again. Its very frustrating having to babysit downloads or be unable to even complete one ,My router is a netgear N150 WNR 1000.
View 14 Replies
View Related
Aug 29, 2012
My son is using the above access point on his laptop. He wants to make the connection secure by having a password that you must enter in order to access it. How does he set up this password? Looked at the user manual; see the screens but don't know how to get to the screen.
View 2 Replies
View Related
Feb 25, 2012
For some reason I cannot ping or FTP on a specific computer on my home network. All other computers work fine and the specific computer works fine on other networks. But the combination of this computer and my home network it doesn't like.
I have disabled both windows firewall and my virus software but nothing seems to work. It seems to be a timeout issue as FTP and ping sometimes does work but FTP is increadibly slow when it works and the ping time is very high 670ms and above. I am running windows 7 and my router is a netgear n150
View 4 Replies
View Related
Dec 25, 2012
Trying to configure my desktop to Wake on Lan. I have the BIOS set to WOL(PME) enabled, i have the ports set up, and everything. I installed a WoL Sniffer on the desktop, and sent a wake up command and the sniffer showed it came through (with the correct FF FF FF FF FF FF <Mac address repeating>). The router it's hooked up to has the UDP port 9 forwarding, ad that's what my WoL tool is sending, and i see the light by the ethernet port and it does indeed flash repeatedly when i try to send the WoL magic packet.However, nothing happens. It's shut down, plugged in, i used the soft shut down from windows,If it was the router, then the light wouldn't flash when sending it...
View 2 Replies
View Related
Dec 11, 2012
Anyone having problems connecting N150 router to a 1st Generation Nest Thermostat? Nest support says it's a problem with them not conforming "to the TCP/IP specifications around Network Address Translation (NAT) timeouts and are disconnecting Nest too soon". Any way to work around this problem until/if a firmware update fixes it?
View 3 Replies
View Related
Mar 2, 2011
I'am having problems when connecting to the internet. I'am running Win7 64-bit and i have Belkin USB wireless adapter( Belkin surf N150) When i first bought the adapter it didnt connect to internet, so i though it is not working and i got it replaced. I got the same problem with the second one as well, and then i have changed the wireless mode on the device manager from: IEEE 802.11b/g/n to: IEEE 802.11b and eventually i have connected to internet without any errors, but in this mode the internet is unbelievably slow which is very slow when compared to another wireless mode where i have changed it from. So my question is why i can't connect to internet IEEE 802.11b/g/n in this mode? The weird thing is that some times it connects to internet with no error and dissconnects again in a short while. Also when the windows tries to repair it, i get this report:
Windows Network Diagnostics Publisher details
Issues found
Problem with wireless adapter or access pointProblem with wireless adapter or access point Not fixed
Refer to Windows Help and Support for more information about wireless connectivity problems Failed
Reset the wireless adapter Completed
Investigate router or access point issues Completed
[code]....
View 17 Replies
View Related
Apr 30, 2012
I recently bought a router so I could connect my Toshiba laptop to the internet. After I connected the ethernet cable to the router and plugged everything in, I installed the program from the CD that it came with. After the whole process, it says "You are now connected to the internet!". Yeah well when I try to get on the internet, it suddenly takes the connection off. On my wifi status, it says it's not connected anymore. When I try to connect again, it says I'm connected, although if I get on internet explorer, it takes off the connection again. Though when it is connected, it says no internet connection available although I am connected to the router. So basically, I'm connected to the router, but not the router to the internet.
View 4 Replies
View Related
Sep 5, 2008
I have a linksys system WRT54G at home. I had no problems with the Linksys router until about a month ago when I decided to make it a secure network. I run three computers of the wireless router (1 desktp and 2 laptops) Since making the wireless network secure I can not connect with my business laptop IBM Thinkpad X40, but thother e computers work just fine.
View 8 Replies
View Related
May 28, 2013
After much troubleshooting to connect and stream content from my desktop to my blu-ray player, it only works if my laptop is also connected to the network. I use a Belkin N150 F9K1001v1. I cannot for the life of me figure out why it will stream just fine as long as my laptop is running as well. I am confused if this is an issue with the router or with Windows7 Homegroup (though other share options proved unfruitful).
View 2 Replies
View Related
