Belkin N150 Disc For Setup
Apr 15, 2012i cant find my disc for setup?
View 2 Repliesi cant find my disc for setup?
View 2 RepliesIs there a way to quickly disable Wi-Fi on a N-150 from the router setup page? I have looked on my admin page but I don't see it. I just want to be able to turn the radio on and off from the PC that is connected via ethernet.
View 3 Replies View RelatedCan the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.
View 1 Replies View RelatedThe "Setup Wizard" disc that came with my WET610N won't work in a Mac. Is there a disc or a download available?
View 6 Replies View RelatedI have just changed isp's from talktalk to bt and becose I use an IP security camera, I want to use my belkin modem router. Bt will not even try to set the router up to enable bt bb "even though when going to them they said they would". How to set the belkin N150 for bt broadband.
View 1 Replies View RelatedI bought a new cable and rewired the ISP connection because mice chewed on the cord in the attic. I have a belkin N150 as the main router with the connection comming in to it. I have the DD-WRT that we want to setup as a repeater. I followed instructions as too the wireless mode, security key, gateway, subnet and all that but I cannot see the DD-WRT router.
Okay I rebooted the repeater and entered the settings again from here and now it is working except I cant see my repeater now when i type 192.168.2.1.
I recently had trouble with my Comcast Xfinity internet service and called to have them send a refresh signal. I was up and running again with my ethernet, but my wireless service using a Belkin N150 wireless router hasn't worked.From everything I had read I needed to do a hard reset of the Belkin N150 router and then reconfigure it's settings. Well I did the hard reset and power cycled everything, the modem, computer and router. I then plugged in everything again and connected the modem to the WAN on the router with one cable, and the computer to the LAN on the router with another cable. (I am using a Macbook Pro operating with Mac OSX). Now I cannot connect to the url...to configure the settings on the router at all!
I think the problem has something to do with my IP address. I opened the network settings and saw that my IP address is 50.138.25.x while my Subnet Mask is 255.255.254.0 and the router is being listed as 50.138.24.x. How to change this IP address to get my router connected or could it be another problem?
I am trying to use this belkin surf n150 in a Netbook thats is running Windows CE embedded 6drivers for windows ce6 and can not find any drivers
View 1 Replies View RelatedI've just bought an N150 router. I also have a wireless IP camera. I want to keep the same 192.168.2.3 address for my camera regardless of how many other devices are connected when I switch it on. If the address changes I need to connect a cable to access it.On my previous prehistoric Netgear I could reserve addresses that I didn't want to change. I tried turning off DHCP but then couldn't access the router from the wired PC and had to reset it all. Then I had to run cables down the garden to reconnect the camera.Can I turn DHCP off for some addresses that I want to keep?
View 3 Replies View RelatedI lost my set up CD for my N150 Belkin router is there a way to manually download the driver installation?
View 3 Replies View RelatedAfter our ISP had a network outage, our Belkin N150 stopped working properly & now I can't get to the Settings page to fix anything. I have used the Reset feature to no avail. The blue light is on but the "Fixit" feature only comes up with something about the ASDL line.
View 1 Replies View RelatedHow can I set up a N150 router so that I can access a WiFi printer (Canon) with my laptop and/or iOS device? No Internet involved - just want to wirelessly print to my new Canon printer.
View 1 Replies View RelatedI have a Belkin F6D4230-4 Enhanced N150 router. Would it be advisable to add a range extender to hit weak signal areas or simply upgrade to a more powerful router?
View 1 Replies View RelatedWhat buttons, in specific order, do i press to reset my router? i used to know how but can no longer find that info
View 2 Replies View RelatedJust bought the N150 router. Trying to enter the router setup for the first time. I leave the password blank like it tells me to, but it says i have an incorrect password. Tried pressing reset button for 10 seconds, but get same result.
View 8 Replies View RelatedI havent been able to connect to the internet with my wireless Belkin N150 router in 2 days! I have tried everything. I have done everything on this website and it still will not get on the internet. My modem works fine.
View 3 Replies View RelatedI recently bought a router so I could connect my Toshiba laptop to the internet. After I connected the ethernet cable to the router and plugged everything in, I installed the program from the CD that it came with. After the whole process, it says "You are now connected to the internet!". Yeah well when I try to get on the internet, it suddenly takes the connection off. On my wifi status, it says it's not connected anymore. When I try to connect again, it says I'm connected, although if I get on internet explorer, it takes off the connection again. Though when it is connected, it says no internet connection available although I am connected to the router. So basically, I'm connected to the router, but not the router to the internet.
View 4 Replies View RelatedMy enquiry is about a brand new Belkin N150 F6D4050ed that i bought last week.I had to buy it because my previous Wifi Dongle just stopped working all together, it was an excellent dongle, gave me full signal strength and never cut out.Then i bought the Belkin.. I installed the drivers, plugged it in, since then, i have had 2-3 bars constantly, mostly 2 bars, The router is only 8-10 Feet away from me in the next room which is seperated by a very thin wall, It cuts off all together if a body stands in front of it, such as my brother coming in to chat. I have tried to move it around the room with no joy, All laptops and other wireless devices in the house connect to the router fine (Including downstairs in the garden even),Im a gamer, so i need a stable strong connection and its impossible to stay in games with this dongle.
View 2 Replies View RelatedI can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router?
View 2 Replies View RelatediI downloaded belkin n150 router where do I find network security key
View 1 Replies View RelatedI have just bought a Belkin n150 router. Connected it to my modem and PC and I'm recieving internet. Connected my phone and laptop and getting wireless.The issue, however, is that I cannot login to the router page. The login says to leave blank for default, but it gives me an incorrect password error. I have tried resetting using the button located above the power cable to go back to defaults, but I continue to recieve the error.
I have tried a all the other usual default passwords, password, administrator, admin, etc.I've gone through pages of google search results and found nothing. Have I missed something obvious or did Walmart sell me a defective router?
How do I get my verizon usb mobile modem to work with my wireless router? My router is a Belkin N150.
View 1 Replies View RelatedCan't use internet and phone at the same time on the N150 router. On DSL and whether on the DSL line or using VOIP when using the phone the internet goes down.
View 9 Replies View RelatedThis problem started happening a few days ago. Whenever I try to access [URL] on my computer that's not physically connected to the router and modem, I keep getting a 403 error:
You don't have permission to access / on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Apache/2.2.22 (Unix) mod_ssl/2.2.22 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 Server at www.facebook.com Port 80 --
but I can access touch.facebook.com and m.facebook.com. If I use the computer that is physically connected to the router and modem, I can access Facebook fine. I've tried using CMDPrompt and releasing/renewing IP to no avail. I use the belkin n150 router with updated firmware and the linksys wireless-g pci adapter with v3 drivers. Never had an issue before up until now.
I recently got a Belkin N150 Enhanced Router Model F6D4230-4 V1. I upgraded it to the recent firmware.
I use it NOT to access internet, but only to hook up my desktop computer with my laptop and my tablet PC. I use Win7 Ultimate on both computers. I configured a Win7 home network and I managed to access shared files between the 3 devices.
However, the speed is very very low, not going over 1.5 MB per second , sometimes even less, although the signal strength is the maximum (54).
The distance between the laptop and the desktop is only 4-5 meters, in the same room. My laptop is HP Compaq 6710b which has what seems to be a "Intel(R) PRO/Wireless 3945ABG Network Connection" .
Transfer speed is the same whether transferring from or to the laptop. I configured the laptop according to the instructions in the manual.
I have a G Wireless F5D77634-4A-H V2 router and an N150 Micro USB Adapter on a HP Desktop. The Desktop cannot see the router.
View 1 Replies View RelatedMy N150 wireless router sees 25mb+ speed from my internet connection but my wireless connects at 1mb. Why is the WiFi being resricted?
View 2 Replies View RelatedJust bought N150 router. Have fiber optic to PC now. Want to add wirelss to use laptop in other parts of house. Plug cable company CAT5 into port marked "Modem" and then my pc into one of the LAN ports ?
View 1 Replies View RelatedMy router N150 Model# F9K1001V4 has stopped transmitting or will not sustain a signal?
View 1 Replies View RelatedI have a n150 and it only allows private ip addresses for the lan setup. Is there anyway to assign a public address? I need to have the DHCP use a public range and I can't do that unless I can set the router to a public ip.
View 2 Replies View RelatedMy N150 router V1 is blinking orange, reset tried many times but nothing works, its less than a year old but i dont have the receipt any more.
View 1 Replies View RelatedCan any of the wired/wireless routers like the n-150 be sub-netted with each wired port being its own subnet?
View 1 Replies View Relatedi lost my belkin n150 installation cd, and i haven't installed it on my computer, my net connection to my computer via lan keeps dying, but wi-fi works perfectly. What should i do? Where can i download the software from??
View 1 Replies View Related