In order to feed my netgear dgn1000 adsl modem/router with a rca roadrunner modem with ethernet single jack do I enable NAT or not on Netgear router and do I use router as DHCP or not?
View 2 RepliesI'm trying to hook up a D Link 150 601 router to my time warner w/road runner computer but it won;t on DHCP I'm lost as what to do.
View 1 Replies View RelatedI have a home made desktop I use for work so I use a dsl modem (my laptop wireless ofcourse) I was thinking of switching to Clear...Any thoughts? I have TWC roadrunner and its the 3 way package (net, phone, cable) But I watch my shows online cable is over-rated for us tech nerds...
View 1 Replies View RelatedI was given a Pc that had road runner on it. When I use our ISP IE does not connect, it seems to be looking for Road Runner. How do remove road runner so that I can connect to the internet?
View 1 Replies View RelatedI have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
How do I delete archived email back to 2009 in Road Runner?
View 5 Replies View Relatedmy timer warner router connect to a swith (linksys), and the swith connect to 2 computer. When i restart one of the computer, the internet don't work, but the networking is working, i need to reset the modem by unplug and unplug the line of one computer (so only one computer is hook up to swith and then to the router).... after i got the internet connection from that computer, then i can hook up another computer successfully. But after I reboot one computer, the internet connection won't work again
View 1 Replies View RelatedI am trying to set up a d-link router with a modem provided by time warner cable. I've powered down, reset the router, and I've put it on dynamic settings (sorry if that's incorrect terminology... not a comp. buff). I can't get my wireless to connect to internet.
View 1 Replies View RelatedI have a 2 computer connected to the WRT54GS which is connected to the RCA DCM 425. It was initially fine, however now the internet is disconnecting at an absurd rate, at least 3 within an hr, sometimes more, and the only way it would reestablish connection is by unplugging and replugging.I have called time warner's customer support and they said it was because of the router. I have searched through various threads and saw and some had similar problems, but they were related to wireless instead of wired ( my case) so is there some settings i can change within the linksys to minimize the amount of disconnections? Becaused based on the log from the RCA,it seems that they are not reading each other too well. Are there any other routers that may establish a connection better than the GS?
View 4 Replies View RelatedI am using NetGear DGN1000 router which includes ADSL modem. I bought another router (Linksys E3000) with I connected to the old one. I would like to setup port forwarding on the new one and use the old one as a modem only. How can I do that?
View 3 Replies View RelatedI am trying to set my NETGEAR N150 DGN1000 . I can connect to the router via wireless but no Internet.
Theh INTERNET PORT indicator on the router is goes to OFF mode.
Before I try this I had Internet with the same line with a different router.. I am not too sure what's wrong with this.. Could any one come up with a possible solution..
I am trying to set my NETGEAR N150 DGN1000 .I can connect to the router via wireless but no Internet.Theh INTERNET PORT indicator on the router is goes to OFF mode.Before I try this I had Internet with the same line with a different router..
View 3 Replies View Relatedbasically we got sent this new router from Orange (our ISP) and we have had problems with it for the last week. The router model is the Netgear N150 DGN1000. Sometimes I connect it will be absolutely fine, but then the next time I log onto my laptop it can't identify the network, it says connected but doesn't have the globe in the bottom right hand corner of my screen. Then we have to reset the router a few times everytime until it recognises it, even though the settings are saved when we connected last time. It is the same with my sisters laptop. We both have Atheros network adapters so that may be a compatability issue with the router, but my brother connects fine on his everytime. A similar problem occurs with modern warfare 3 on my ps3, it won't let me sign in to playstation network half the time and keeps saying NAT type failed, even though NAT is enabled on my router. get this problem sorted and to get a consistent network connection that connects every time that would be great. We changed the security type to WEP on it a few days ago from WPA and that meant we could sign into modern warfare 3 some of the time rather than never, but we are still having issues.
View 8 Replies View Relatedwe just switched over to time warner. We need the IP address to set up our surveillance cameras. Is there any way to get that online?
View 2 Replies View RelatedI bought my dad a Netgear N150 DGN1000 Wireless ADSL Router to replace his D-link router which kept dropping the wireless signal. I have established a wired connection and my ipad, iphone and his old laptop connect wirelessy to it without any problems but I just cannot work out why his laptop won't connect to the internet.It recognises the wireless signal and it says its connected and that the signal is excellent but when I try to go on the web or check emails it just won't work.I've tried deleting all his wireless networks and starting from scratch but don't know what else to tryHis PC is running windows Vista
View 9 Replies View RelatedI'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?
View 2 Replies View RelatedWithout my N 450 router hooked up I am getting hardwired speeds of 50/5 mb, but with N 450 hardwired into my PC the speeds drop to 20/5 mb. I have checked DHCP and I am not getting piggy backed. Is it a bottlekneck, misconfigured or just not compatible with Time Warner?
View 1 Replies View RelatedI have a Cisco PIx firewall that is connected to a cable modem with Time warner cable. I am supposed to have 35 down and 5 up for my speed on that modem. When I bypass the firewall and connect directly to the cable modem, I get download speeds in excess of 30 and upload speeds of about 5. However, when I connect via my workstation, which goes through the PIX, I am lucky to get speeds in the 1.2 for a download and 2-3.5 for the upload. I am using a laptop to test. We have gigabyte Cat5e cabling and gigabyte switches.
Below are statements from the config.The interface lines are per below:
interface ethernet0 100full
interface ethernet1 100full
interface ethernet2 auto shutdown
MTU outside 1500
How can i adjust this so I can make use of the 30 speed of the modem?
last Monday night, out internet just stopped working completely. We had an older Livebox (Inventel) and after phoning tech support, we were told it was a problem with the router. The problem was with the "@" symbol flashing about once a second. Anyway, they sent over a new router. This was the netgear1000. We set it up and the Internet light stayed red - all the other lights that are meant to be green are green.. We checked the details against what was on the personal detail card they sent over with the router and all of that was correct. It even shows the upload and download speed even though we cannot connect to the internet. When I check the status, it states that the LCP is ready to come up or something along those lines and that the CHAP authentication failed. I phoned them up again and they couldn't solve the problem so it's being moved up to a different department apparently. Anyway, I don't get how it can be an error with the username and password if my old router just stopped working with nothing being changed. The phone line is fine and the tech guy even changed our password.
View 4 Replies View RelatedI have a Netgear modem/router [DGN1000] (192.168.0.x) that serves as a the router for network 1 and also as the internet gateway. I have a Cisco [E4200] (192.168.1.x) router connected to the Netgear modem via the WAN port on the Cisco. This serves as the router for network 2.
DHCP is turned on for both routers. I can access all devices on network 1 using any device o network 2 including the Netgear modem configuration page, but I cant access any device on network 2 from network 1. Is it possible to have access to devices from both networks? [URL]
I have just picked up an ADSL Netgear N150 DGN1000 router as my old router (just some branded old thing from my ISP has started playing up a bit due to age more than anything else) but for some reason it is not seeing my internet connection at all.I've reset it factory default twice and connect to it wirelessly just fine, including accessing the router's setup pages and whatnot. I was going to update the firmware from in there.. but that needs the connection to the internet as well.
My ISP is BE Unlimited (UK ISP) and their old branded modem connects again immediately when I plug that back in so I know it's nothing to do with any of the cables or filters, etc.One thing I have noticed is that on the box for the new router it does say Orange Retail (another UK ISP) on one of the barcodes but the router itself isn't branded, so I don't see this could be a problem but figured it was woth mentioning.
i can't connect to the wireless internet but can connect to internet through the ethernet cable. i am connected to network on wireless but no webpages work. other devices like iphone, and other laptos can connect to internet on wireless. i have tried turning the router on n off to restart it, and even resetting it back to factury settings but still doesn't connect wirelessly to my laptop.
have a netgear N150 Wireless Modem Router DGN1000 running microsoft windows 7 hp pavilion dm4 laptop
when I try to connect a laptop to the wi fi it won't connect because the connection has changed from home network to public and sometimes unidentified network . I can get it connected by momentarily unplugging the router and rebooting it , then pressing connect button and it will revert to home network and things are ok . It is a netgear DGN1000 and I tried another router same make and model, same problem. I use an ethernet cable on my desktop no problems.there's 3 laptops come in to occasional use and it's happened to them all . My early attempt was microsoft's fix for sticking in public mode . It is windows 7 pro on the laptops , ultimate on desktop?
View 4 Replies View RelatedIs it possible for Time Warner Cable to use a pre-existing cable line which is going into my cable box to hook up a modem so I can have Internet? I've got a modem in another room but I don't want a cable running down my hallway for 30 feet.
View 6 Replies View RelatedI have to reconfigure the wifi connection everytime a new laptop comes into my house -- and we can only use one computer at a time with this router...huge problem with a big family..
View 1 Replies View Relatedconfiguring policy based route for my cisco router?Basically, I have a 2811 cisco router with 2 ADSL ports. 1 port is for iiNet line and another port is for Telstra line.I want to configure a policy based route on the router so that:Any traffic coming from 1 internal IP (i.e. 172.16.x.1) will go through iinet line (i.e. Dialer 0) interface.Any traffic from rest of the office will go through the Telstra line (i.e. Dialer 1) interface. Is there any easy way to configure this policy based route?
View 8 Replies View RelatedOne of my laptops is having a connection problem. I have 3 other laptops that can connect perfectly with my router, and normally there's only 1 laptop that is connected to my router. The laptop with the slow connection (takes 5 HOURS to load a website, sometimes will not even load), i re-installed the OS, and installed all the drivers needed, and it still wont work. it shows strong connection to me, and im sure the password for the router is right. below is the ipconfig/all information. Having this problem for 2+ weeks now!!! I think this problem started when i restored my router to factory setting, my router is Netgear WGR614v6.
View 14 Replies View RelatedSo my old router needed replacement and my dad bought a Netgear gigabit ethernet switch instead of a router. It said that it gets 1Gbps when I look inside the local area connection speed. The problem was we tried to use it like a router but only 2 computers could connect to the internet at one time but it was indeed noticeably faster when it came to video streaming speed. We since returned it and bought a Netgear N600 router that says the speed is 300mbps but like my old router it shows the speed is actually 100mbps and the streaming is good for the most part but every now and then slows down. Would using the ethernet switch with our new router work with streaming speeds and connection stability and of course let more computers connect and also use the routers wireless.
View 13 Replies View RelatedI have internet through my cable company and currently use their wireless netgear router. I purchased a Netgear Router N600 but it does not have a port for the cable connection. Can you recommend the correct wireless router
View 1 Replies View RelatedCan't get into my netgear router to config it. I have tried using 192.168.0.1 and 192.168.1.1. So far it will not give me a window to log in. It has allways work before on xp pro, but now i am using win 7 on my new computer.
p.s. the router is a Netgear model # WGR614
I am having problems connecting my PC (Win7) to my Router (Netgear DGN2000) via ethernet cable.Wi-fi is working fine but I want to speed up my connection using the PC's Gigabit port. Here are the problems:
- When connecting via wi-fi everything is fine
- When enabling my LAN WITH wi-fi still enabled I lose all internet connectivity
- When enabling my LAN and disabling wi-fi lose all internet connectivity
Here is my IP Config when both are enabled :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig
Windows IP Configuration[code].....
Using a Dell Dimension 3100/E350, where do I connect the Ethernet cable from Netgear router.
View 1 Replies View RelatedI'm running Arch Linux on an Acer laptop and my wirless connection doesn't stay up. After a while it disconnects, and when I try to reconnect I get stuck with a "Waiting for authorization" message. I have to retry several times before getting the connection stay up for few minutes. This happens with both networkmanager and wicd. The strange thing is that the iMac that sits next to the laptop connects fine, and when I use my laptop within the university wireless network it works normally.
I use a Netgear DGN1000 modem/router