Time Warner Internet Router Not Working With Switch?
Jul 16, 2012
my timer warner router connect to a swith (linksys), and the swith connect to 2 computer. When i restart one of the computer, the internet don't work, but the networking is working, i need to reset the modem by unplug and unplug the line of one computer (so only one computer is hook up to swith and then to the router).... after i got the internet connection from that computer, then i can hook up another computer successfully. But after I reboot one computer, the internet connection won't work again
View 1 Replies
ADVERTISEMENT
Jan 27, 2011
I am trying to set up a d-link router with a modem provided by time warner cable. I've powered down, reset the router, and I've put it on dynamic settings (sorry if that's incorrect terminology... not a comp. buff). I can't get my wireless to connect to internet.
View 1 Replies
View Related
Jan 2, 2012
I have a home made desktop I use for work so I use a dsl modem (my laptop wireless ofcourse) I was thinking of switching to Clear...Any thoughts? I have TWC roadrunner and its the 3 way package (net, phone, cable) But I watch my shows online cable is over-rated for us tech nerds...
View 1 Replies
View Related
Jul 6, 2012
I have a 2 computer connected to the WRT54GS which is connected to the RCA DCM 425. It was initially fine, however now the internet is disconnecting at an absurd rate, at least 3 within an hr, sometimes more, and the only way it would reestablish connection is by unplugging and replugging.I have called time warner's customer support and they said it was because of the router. I have searched through various threads and saw and some had similar problems, but they were related to wireless instead of wired ( my case) so is there some settings i can change within the linksys to minimize the amount of disconnections? Becaused based on the log from the RCA,it seems that they are not reading each other too well. Are there any other routers that may establish a connection better than the GS?
View 4 Replies
View Related
Dec 5, 2012
I'm trying to hook up a D Link 150 601 router to my time warner w/road runner computer but it won;t on DHCP I'm lost as what to do.
View 1 Replies
View Related
Mar 1, 2012
In order to feed my netgear dgn1000 adsl modem/router with a rca roadrunner modem with ethernet single jack do I enable NAT or not on Netgear router and do I use router as DHCP or not?
View 2 Replies
View Related
Nov 6, 2011
we just switched over to time warner. We need the IP address to set up our surveillance cameras. Is there any way to get that online?
View 2 Replies
View Related
Jun 12, 2013
Without my N 450 router hooked up I am getting hardwired speeds of 50/5 mb, but with N 450 hardwired into my PC the speeds drop to 20/5 mb. I have checked DHCP and I am not getting piggy backed. Is it a bottlekneck, misconfigured or just not compatible with Time Warner?
View 1 Replies
View Related
Aug 23, 2011
I have a Cisco PIx firewall that is connected to a cable modem with Time warner cable. I am supposed to have 35 down and 5 up for my speed on that modem. When I bypass the firewall and connect directly to the cable modem, I get download speeds in excess of 30 and upload speeds of about 5. However, when I connect via my workstation, which goes through the PIX, I am lucky to get speeds in the 1.2 for a download and 2-3.5 for the upload. I am using a laptop to test. We have gigabyte Cat5e cabling and gigabyte switches.
Below are statements from the config.The interface lines are per below:
interface ethernet0 100full
interface ethernet1 100full
interface ethernet2 auto shutdown
MTU outside 1500
How can i adjust this so I can make use of the 30 speed of the modem?
View 2 Replies
View Related
May 29, 2012
Is it possible for Time Warner Cable to use a pre-existing cable line which is going into my cable box to hook up a modem so I can have Internet? I've got a modem in another room but I don't want a cable running down my hallway for 30 feet.
View 6 Replies
View Related
Oct 26, 2011
I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies
View Related
Mar 11, 2011
My internet (wired and wireless) usually works fine, but occasionally (read: every few days to weeks) the connection will suddenly black out for a period of time, anywhere from an hour to a day. I have tried resetting both my router and modem, and going through all the settings on my laptop, but I'm pretty sure it's not my computer, as no other devices can connect either. During the blackouts, when I look at the modem, the internet light will turn on for a second, then go off and then the red "alarm" light (aka "something is wrong" light) starts blinking like crazy, and this keeps repeating. This resolves itself after anywhere from a few hours to a whole day and everything is normal again. The light show, and the fact that I can't find any other problems, leads me to believe that it could be a problem with my provider (or the network itself) and not a hardware or software problem, but I can't be sure of this.Also, during the blackouts, I can connect to the network, but it shows that limited connectivity symbol (exclamation mark thing) and says no internet.
View 5 Replies
View Related
Apr 11, 2012
I usually put some stuff up for downloading and go to sleep. Now I setup my computer to auto-shutdown at a particular time via cmd, but I want o know whether it is possible for me to put some time settings in my modem+router so that it switches off at a particular time or something like that.Then when I get up next morning, start using it again. I don't want to keep my router on after it's not needed. Also I don't wanna keep it vulnerable after it's not needed, even though I have set it up quite securely. ( WPA2 PSK, and MAC filtering)
View 5 Replies
View Related
May 13, 2012
I have a problem with my internet connection. It started some weeks ago and i called my ISP , they checked my phone line and they said that everything is working correctly.They said that the problem might be my router.I bought a new router ( ZTE ZXV10 W300 V5.2 ) but the problem persists. I changed all the cables tried using the internet without any telephone device connected to my phone line , i changed antivirus program ( from norton to avast ) It just wont stop dropping! My ISP told me that the problem might be a program from my computer.Note that the connection mostly drops when im playing online games but it drops when im surfing too.By the way, can the reason of the internet drops be a virus? url...[code]
View 7 Replies
View Related
Jun 29, 2011
Ciso 1941 router frozen once a day, sometimes after 2 to 7 days. When the router frozen, no internet connection and cannot login/ping ethernet ports. I can login to console port and copy the error messages below. Reload the router and it will return back to normal operation. Re-installed IOS but still the same.
IOS Version 15.1(2)T2,
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
[code]...
View 5 Replies
View Related
Jun 15, 2011
I have two laptops which connect to the router via wireless. This router is wired to the modem. I can connect each laptop to the router then make an internet connection. This works fine. But if one laptop is connected to the internet, then the other cannot. I have to disconnect the first laptop then reconnect with the second.
I have had this scenario working in the past and can't remember what I have to do to enable both laptops to use the internet connection at the same time.
View 4 Replies
View Related
May 9, 2012
I am in the process of trying to replace a modem/router,the switch does not work with the new modem/router although if I connect the modem/router directly to my computer it works fine,so its not a router issue.I suspect that the settings need to be changed in the switch to allow the new router to work ?
View 1 Replies
View Related
Sep 20, 2012
My Internal Wireless adapter not working each time boot up I am using Windows 7.
I have to diagnose each time and click fix for it to enable the internet to be on. Why is it disconnecting me from connecting to the internet all the time upon startup ?
Here are the details-
Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter Wireless Network Connection driver information:
[Code].....
View 2 Replies
View Related
Jul 17, 2011
I have a DIR-825 router connected to my cable modem. The 2.4ghz constantly goes down but not the 5.0ghz. Our wireless devices will see the connection but we are unable to connect.We only have one device that uses the 5.0 and multiple devices that use the 2.4 and none of them can connect.I am currently running firmware 2.02. I also notice that the time changes and I have to reset the time/date.I have tried rebooting the device, resetting the router, changing the network key, updated the time/date, renewed the DHCP...I don't know why it keeps going down, why the time/date keeps changing, and why I cannot get the 2.4 working.
View 13 Replies
View Related
May 11, 2012
I have setup a Cisco SR520W and everything appears to be working. After a few hours, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device.If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my the modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again.
View 1 Replies
View Related
Aug 28, 2011
I just upgraded the firmware on the RV220W to 1.0.2.4 and it looks like the time is not updating. I tried a couple of different default time servers and also a custom time server (time4.nrc.ca).
View 2 Replies
View Related
Mar 21, 2005
I am using an 831 router and am trying to get DDNS to work. Here is the debug output:
RESS_ASSIGN: Interface Ethernet1 assigned DHCP address 67.162.204.242, mask 255.255.254.0, hostname testlab831.xxxxxx.com
00:53:06: DYNDNSUPD: Adding DNS mapping for testlab831.xxxxxxxx.com <=> 67.162.204.242
00:53:06: DYNDNSUPD: Sleeping for 3 seconds waiting for interface Ethernet1 configuration to settle
00:53:09: HTTPDNS: Update add called for testlab831.xxxxxxxx.com <=> 67.162.204.242
00:53:09: HTTPDNS: Update called for testlab831.xxxxxxxx.com <=> 67.162.204.242
[code]....
what the problem is with the "Call returned Connection time out for update testlab831.xxxxxx.com <=>" line.
View 3 Replies
View Related
Sep 25, 2012
When I start-up my computer, it takes over an hour to find my router on my computer (Not on my brother's computer, or the computer upstairs). Once it does, it connect perfectly. This is very annoying because I do not have a lot of time anyway to work/play and when I do, it takes over an hour to find the router.Recently, I have been having HUGE lag spikes, constantly disconnecting from games and skype calls.
View 1 Replies
View Related
Apr 28, 2013
some of my switches (3750s) are on the right time and some are not. i have them all pointed to the same DC for NTP and they all say they are synchronized. is it possible to have the switches pole the DC for the right time and update?
View 4 Replies
View Related
Mar 12, 2012
One of my laptops is having a connection problem. I have 3 other laptops that can connect perfectly with my router, and normally there's only 1 laptop that is connected to my router. The laptop with the slow connection (takes 5 HOURS to load a website, sometimes will not even load), i re-installed the OS, and installed all the drivers needed, and it still wont work. it shows strong connection to me, and im sure the password for the router is right. below is the ipconfig/all information. Having this problem for 2+ weeks now!!! I think this problem started when i restored my router to factory setting, my router is Netgear WGR614v6.
View 14 Replies
View Related
Nov 12, 2012
In change network topology, we are going to assign PC's Gateway as Switch (3750X) IP Address rather than server IP Address. Currently we have configured all Sytems's Gateway is Internet Server IP Address which we are going to replace with Switch IP as Gateway. [code]
Issue is while connecting specific application like team viewer in which application tried to send keep alive message to the live server and in case of switch/router IP as gateway. Connection doesn't established. However it is working fine when Internet Server IP treated as gateway.
View 33 Replies
View Related
Apr 13, 2012
I have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
View 2 Replies
View Related
Oct 1, 2012
My customer has various Cisco switches but only cisco 2950 switches has the problem of ping timeout or reply time is too long(average more than 2 sec). It will cause I Network Mangement software alarm always.
View 4 Replies
View Related
Dec 20, 2011
I've beating my head against the the above said problem for a quite a while. Our client has a very strict security policy and they require all standard protocol to comply with the expected behaviour. It was discovered that their 3750 switch running c3750-ipservicesk9-mz.122-25.SEE3 software and configured to sync its time with an external public NTP server triggers IPS signature - DNS Info leak. The problem is that the switch initiates the packet on UDP port 53 and not as I would expect on port 123 for NTP. Of course I can tune the IPS sensor and make it not to fire this signature but the client needs to know why it is happening and if it is faulty IOS software that doesn't comply to the rules.
View 2 Replies
View Related
Jun 13, 2011
My laptop computer is having difficulty connecting to a wireless internet. I just bought a brand new router but still having difficulties. Once I start up the computer it works but if I take a break from the computer (computer times off or I close lid) it will stop working. It reads the router but states identifying and has a X between router and internet.
View 1 Replies
View Related
Nov 13, 2011
i have two a laptop and a notebook, i have moved into a new house at university and have a great internet connection with everything working brilliantly! for the first time today i tried to connect my actual laptop to the internet but it wont. It connects to the correct router and that router is working fine but my laptop says 'local only' and will not let me connect to the Internet at all?
View 1 Replies
View Related
Feb 19, 2013
I have a D-Link DIR-615 router and can't get the internet working and have done everything possible to get it working. the globe light which is the internet light will not turn from amber to green. I have done a factory reset which is why this occurred in the first place. After the reset the globe stayed orange and the internet refused to work now everything is up but the wireless will not work nor the internet I have gone through both the manual set up and set up wizard and tried all options.
View 8 Replies
View Related
Jul 29, 2012
My father has his computer connected to a router which is then connected to his modem and has been having difficulties getting onto basic internet websites.He unplugged the router to restart it and forgot about it.Then he tried to access the internet and it is running smoothly while still connected to an unplugged router. And How do we get the wireless connection back without screwing up the desktop connection? In addition, the desktop computer says that it has no connection and that a network cable is unplugged.
View 2 Replies
View Related
