Netgear 26 Port / Getting Network Fault Detection Software?
Mar 31, 2012
I have a 1Gb network set up whereby I have a Netgear 26 Port 1000Mbps unmanaged network switch at the heart of my home network. What I have the problem with is devices connected on any one of my 3 300Mbps access points drop out showing no internet but they really mean no network access unless i disconnect and reconnect or switch to another access point. Other things I get happening is one min i have a transfer speed wired connection to wired connection of 35Mb per second and then I only have 8 or less. I am wondering if I have cable issues but before I went out and spent about �100 on new belkin cat6 cable I would ask if there is software I can use to test all the devices on the network so I can replace the faulty item.
View 3 Replies
ADVERTISEMENT
Apr 14, 2012
Lately I encountered random Internet connection issues?My router is a Netgear Wireless ADSL Firewall Modem Router DG834 (Firmware V1.05.0) and my ISP, isn't the most reliable regarding bandwidth... All clients (max 3 at the same time) connect wireless.The problem is that the last few weeks my connections is very unstable, all clients lose the internet connection until you restart the router manually.I can't even connect to the webinterface (192.168.0.1), during the downtimes.
View 4 Replies
View Related
Aug 28, 2012
Connecting Avaya 9611G IEEE class 1 devices to a Cat2960s. How ever some of the phone are registering as class 3 devices no matter what interface the phone is connected to. Typical port config is as follows:
interface GigabitEthernet1/0/2
switchport access vlan 25
switchport mode access
switchport nonegotiate
switchport voice vlan 22
srr-queue bandwidth share 1 30 35 5
[code]....
View 4 Replies
View Related
May 2, 2012
I am working as a Network Administrator. Here I have to manage Cisco Switches 2960 and 4500 Series, Active Directory, Database Server, Exchange Server, File Servers, IP Telophony, Fortigate Firewall, 2960 Router, Wifi availability within Company. Although, in case of any disaster we will contact to vendor for solution, but the management told me to deploy any Software/Network Monitor which will facilitate to manage all this, i.e, overall network Health check, Performance Measurement, Fault Tolerance.
View 2 Replies
View Related
Mar 4, 2011
I just switched schools and I work for HP's marketing team part time which entitles me to get on some websites blocked by our school's network (sonicwall block).I then tried a proxy on Firefox and it was blocked as the sonicwall detected that I was using a proxy. Why did this happen and is there a way to bypass?This is mainly on wired connection as the Ethernet isn't god awfully slow like wireless is.
View 1 Replies
View Related
Jul 22, 2012
I have:Dell Vostro 460 12 GB RamIntel Quad Core i7-2600 3.40 GHzWindows 7 Wireless card is DW1525 (802.11n) WLAN PCIe CardSays drivers are up to date and the device is working properly. I have checked to make sure it is all enabled. Does not detect wireless networks that are in range. I have 3 other computers and all find multiple - this one detects none. Never has. In the pass I have simply used ethernet cables but for the next few months that will not be possible.
View 1 Replies
View Related
Jul 29, 2011
The idea is to get the date/time logged motion detection is triggered on a certain time frame of the day (5:00 am to 5:30 am), to a txt file or something like that. I plan to port the log to a html/php website.
View 1 Replies
View Related
Apr 17, 2013
I recently purchased a Linksys AE3000 Dual-Band Wireless-N USB Adapter as an upgrade to my Dell Desktop Computer and to compliment the Linksys EA4500 Router that I recently installed. Generally it seems to work well and the 2.4 GHz network status typically shows speed to be 450 Mbps. However, I’ve discovered if the computer goes to sleep based on my power plan, when it comes out of sleep the “Available Networks” will show the network I’m connected to (2.4 GHz network) and a false network identified as “Other Network” with a Red “X” where signal strength would normally be. When I mouse over it; it shows Network Name: Other Network; Signal Strength: Excellent; Security Type: Unsecured; Radio Type: Unknown; and SSID: Other Network.
Initially I thought this was an anomaly caused by having both bands of the Router (2.4 and 5.0 GHz) set to the same SSID, so I changed the 5.0 GHz band to a different SSID and set my Media Players to access the new SSID. However, now when the computer comes out of sleep mode, Available Networks will initially only show the Router’s 2.4 GHz SSID and the phantom “Other Network”. It takes a while before the Router’s 5.0 GHz SSID shows up. We live in the country, so there are no other networks close to us, just my home network. It never shows the “Other Network” when I start or restart the computer and if I disable the adapter and then enable it, the phantom network goes away until the computer goes into and out of sleep mode again. Also, I uninstalled and then reinstalled the Driver and then reinstalled the Adapter using the Cisco Connect Software and the problem still exists. Finally, I disabled the Router’s 5.0 GHz network and the phantom network no longer appears under any conditions. The Dell (Atheros Communications) Wireless Card in the computer doesn’t have this issue under any scenario. On both the AE3000 and Atheros Adapters the 2.4 GHz network shows a signal strength of Excellent (5 out of 5 bars) and the 5 GHz network shows Good (3 out of 5 bars).
How to correct this issue? With the issues I’m having with the EA4500 and the AE3000; they are both probably going back to Amazon.
View 2 Replies
View Related
Jun 2, 2012
Motion detection is setup - and I can see in the log and on the Live Video "Motion Trigger Indicator" that this part is working. I can also send test-emails, so the smtp is set up correct. In the Event Setup I have a valid server and a motion triggered event with the status ON. But no emails are sent . In the log there is also no indication of the server trying. Am I missing something - or is this not working for anybody?
And - there is no firmware beyond 1.0 for this model as far as I can see.
P.S. I am using a Gmail account for smtp, port 587 and using startTLS to send with,
View 1 Replies
View Related
Aug 18, 2011
I just need to know what numbers to put in this Server IP AddressI tried putting a 0 and 1 at the end.
View 5 Replies
View Related
Feb 2, 2013
I have a Sony Viao laptop with WinXp SP3 which is now 6 years old. We are currently renting a holiday home in the USA which has an unsecured network. We have two other laptops and they are connected, no problem. This morning my Sony worked fine on email and web access but I was having trouble on FTP. Then email stopped and then web.I have tried all the usual solutions. Delete the Network, restart etc etc.It clearly show the network (and also another secured network I cannot access). When I connect it shows "Acquiring network address" then just hangs. If I press, repair it hangs on "Renewing your IP address" Does the fact that it can see the networks and when I "ping 127.0.01" it seems to be OK, mean that it CANNOT be a hardware fault? I ask this partly because the WLAN switch at the front often does not seem to work (when it does work it is green and currently it IS green)
View 9 Replies
View Related
Jan 21, 2012
I am trying to forward the ports for several ip network cams, that have built in webservers, on this router. I have done this before on my old Linksys router with no problems but the Netgear has me stumped.The only way I can reach any of these devices from the Internet is to map them to port 80. But that limits me to one device, hence the need to forward more ports.All cams have fixed ip addresses so it is not an issue of their ip addresses changing.
View 19 Replies
View Related
Mar 27, 2011
Trying to connect to a computer on a client's network. He has a Netgear WGR614v9 router. I talked him through opening port 23 to 192.168.1.200. I have done this many times on other routers and it should have been simple but could not connect. Had him enable ping response so I could ping his router to verify the connection and ping was good. Tried my port scanner and only port 21 is open. Had client verify the port forwarding data and it is correct. Does he need to restart the router to enable port forwarding?
View 4 Replies
View Related
Jul 31, 2012
How to forward Port 123 on this router?
View 4 Replies
View Related
Feb 24, 2012
When ever I try to port foward It always says the ip adress should be in the same subnet as the lan ip adress when i'm using my public ip adress then I changed my ip adress to the public ip and it worked but no one can't get in the server.
View 1 Replies
View Related
Mar 18, 2012
i have trying for a few days to connect my HP G7000 notebook to the internet through my wireless but i have tried everything i can think without getting anywhere. I only got it a few days back for my daughter to do her homework ect, but can't get it to connect i see a post on here about updating drivers but i can't get it to connect to do this, then thought about downloading the driver update it may need to my laptop but i really dont want to download anything onto my laptop as its a different model with different drivers and dont want it to stop my laptop working.i get on the HP G7000 is cannot communicate with primary DNS server 194.168.4.100 then underneath that message it is saying Network diagnostics pinged the remote host but did not receive a response
View 3 Replies
View Related
Jul 11, 2011
Despite there are all devices are managed in DFM (accorduing to Collection Summary Portlet or Rediscover devices) there are no devices in the Fault Monitor with the message "No devices are available"Does it mean, we have absolutly no faults in our network or does it mean that we have a problem with DFM?
View 2 Replies
View Related
Mar 18, 2013
How to find out which Fault Threshold group a specific interface belongs to.The scenario is that in Fault Manager there is an alarm for which I want to change the Threshold Setting.
Example Alarm:
Event_Description HighUtilization
Device IP x.x.x.x
Device Type Routers
Fault Last Updated At 19-Mar-2013 09:44:25
Component IF-router2.x.x/26 [Tu187] [x.x.x.x]
[Code] .....
View 1 Replies
View Related
May 2, 2012
I try run Fault monitor feature in LMS 4.0, but I got error like this picture :
View 3 Replies
View Related
Oct 23, 2011
I upgraded the LMS 4.0 with LMS 4.0.1 but now the events are removed of Fault View. The equipments than I am monitoring are: ME-3600, ME-3800 and ASR 9000. This is a configuration problem or I have to update something else?
View 1 Replies
View Related
Aug 8, 2012
I have followed all instructions to forward port 22 on my netgear router WNDR 3400v2. It says it forwarded but according to port tracker. Its closed. I am having this with two different locations. All IP addresses are correct and the router can ping them. It just wont open. Using SSH program for port 22 access.
View 10 Replies
View Related
Feb 29, 2012
I play a game Warcraft III the frozen throne from blizzard entertiment and am using router netgear vvg2000 i ported port 6112 it worked for some time but in the last week the port was closed i dont know what happend i cant host games anymore and i searched alot for soloutions in google.
View 2 Replies
View Related
Oct 10, 2012
I'm trying to set up a Minecraft server so I can appear to be a hero to my 8 year old son. I have to forward a port to 25565 adn I've followed all the instructions on how to do this on my netgear DGND3700v2. I've also turned off my Windows 7 firewall, but when I go to a test website, I still get a message saying the port is closed. I don't have a static IP address, is this absolutely critical or does it just mean that the boys will have to log on to a new IP address each time they want to play?
View 1 Replies
View Related
Jul 28, 2011
At work, our proxy blocks everything except for HTTP(S), FTP, and a small handful of other company-specific ports on the _outbound_ connection. On my router, I like to port-forward SSH to my Linux computer server at home but since at work IT blocks out-bound SSH, I have to masquerade the SSH port-forward on my server to get past the corporate proxy. Normally, I've done this in the past by doing something like WAN:9090 (allowed by my IT) --> LAN:22 in my router's port forwards to get SSH routed to my Linux box from the web.
I recently purchased a Netgear FVG318 and it doesn't look like it supports this kind of configuration. In the Security->Firewall Rules->Inbound Rules section of the router configuration I see how to do a port-forward but they only have a drop-down selection of common protocols and will simply 1:1 forward the ports. It doesn't look like it allows to do mis-matched ports on the forward like I'd like to do.
View 14 Replies
View Related
Oct 24, 2012
I need to upgrade my switch to something that has 24 ports. This is for home, simply to sling media around the house, etc. So 3-4 computers, boxes, AVR's, HTPC's, blah blah blah - just the usual stuff.
I was looking at the Trendnet TED-S24DG and the Netgear JGS524 (both are under a couple of hundred bucks). The cheaper the better to a degree - rack mount is preferrable. Both are unmanaged. Jumbo frames?
I need to buy a new router for my network (using DIR-655 for last 4-5 yrs). Would like to move to a dual band product.As I live in Canada and would like to purchase VPN to rid the geo tagging and enjoy US media content. I plan to buy a wifi router that supports VPN to accomplish my goal.
So, from modem, to router, then to a 24GB port switch, devices include 3 wired computers, tvs, boxes, players, blah blah blah, etc.
Placement of the router is in my basement (has to be as this is where all my network/modem/server rack). I plan to also purchase an AP and place it on the 2nd floor of my home (2200sq ft) for coverage in the house.
Question is, once I add the VPN to get US content, there will be times when I want my own PC to NOT be on the US VPN.So, based on the above which dual band router under $130 and how much for the AP? And how do I setup it up so that my personal PC and be on and off the VPN?
Right now I can get a E4200v2 refurb for 60 bucks from NC$X? I was looking at Asus N66, but perhaps its too much for my needs?
View 19 Replies
View Related
Dec 13, 2012
This is Cisco Prime LMS 4.2.2 on Windows 2008 R2
As far as I understand it Fault Manager need to be able to do reverse lookup for ip adresses to show the correct name in the "device name" column. I have double and tripple checked and all devices that only is shown as an ip address do have a reverse in the dns used by the LMS server. The device is correctly registered and inventory have been run. If I hold the mouse pointer over the crosshair on the row of the offending device all info is shown including correct device name and fqdn.
The server is upgraded from 4.2.1 to 4.2.2 and we have the same problem before the upgrade.
View 2 Replies
View Related
Nov 6, 2012
I have an ISR 1921. Every now and then, it crashes saying "Possible software fault". The system LED flashes amber and only a hard reset (power on/off) will reload the ISR.
View 2 Replies
View Related
Sep 11, 2012
I am trying to setup Fault Monitoring on LMS 4.0. When I try to create a Fault Notification Group no devices are listed. They appear to be listed in all other places so I am at a loss as to explain why they are not appearing.
View 7 Replies
View Related
Nov 6, 2012
i´m looking for two hours now and can not find a way to suspend a device in the Fault Monitor. We´re using LMS 4.2.2
View 1 Replies
View Related
Oct 13, 2011
I have an inventory added to Ciscoworks and am getting alerts on interfaces that I want to exclude but for the life of me I can't figure out how to exclude interfaces. Any tips on how to exclude interfaces from the fault engine in 4.1.
View 3 Replies
View Related
Feb 23, 2011
I have set my Netgear WGR614 to a static IP, and I have tried port forwarding but I can't. I've tried disabling SPI Firewall and it still don't work. I have also tried enabling bridge settings on my connection in my modem settings, but that just wouldn't let me back on my internet. How I can port forward?I have a westell 610015.
View 3 Replies
View Related
Oct 10, 2011
I am trying to set my NETGEAR N150 DGN1000 . I can connect to the router via wireless but no Internet.
Theh INTERNET PORT indicator on the router is goes to OFF mode.
Before I try this I had Internet with the same line with a different router.. I am not too sure what's wrong with this.. Could any one come up with a possible solution..
View 5 Replies
View Related
Dec 4, 2012
I have a Netgear wnr2000v3 Router connected to my Motorola Surfboard Gateway.I have a freePBX Server (virtual running off of VMware Workstation 8) that needs ports 10001-20000 and 5060 forwarded to the server at 192.168.1.110
I added the portforwarding as in this photo:
When I use a port tester it still says "Port 5060 is closed"I have also turned off Windows Firewall. What else could be blocking these ports?
View 3 Replies
View Related
