I play a game Warcraft III the frozen throne from blizzard entertiment and am using router netgear vvg2000 i ported port 6112 it worked for some time but in the last week the port was closed i dont know what happend i cant host games anymore and i searched alot for soloutions in google.
View 2 RepliesMy ISP decided to switch to VSDL2, and they are forcing a wireless router (Netgear VVG2000) on me. As I do not want wireless, I will be buying a wired VSDL2 router myself. I looked a newegg first, but nothing that I could find.URL I only need 4 ports as I have a nice 8 port Gb switch.
I guess the distance to bandwidth deterioration relationship is the explanation that this technology is not very widespread in the US. Seems to be getting traction in Europe since 2008.
I just need to know what numbers to put in this Server IP AddressI tried putting a 0 and 1 at the end.
View 5 Replies View RelatedI am trying to forward the ports for several ip network cams, that have built in webservers, on this router. I have done this before on my old Linksys router with no problems but the Netgear has me stumped.The only way I can reach any of these devices from the Internet is to map them to port 80. But that limits me to one device, hence the need to forward more ports.All cams have fixed ip addresses so it is not an issue of their ip addresses changing.
View 19 Replies View RelatedTrying to connect to a computer on a client's network. He has a Netgear WGR614v9 router. I talked him through opening port 23 to 192.168.1.200. I have done this many times on other routers and it should have been simple but could not connect. Had him enable ping response so I could ping his router to verify the connection and ping was good. Tried my port scanner and only port 21 is open. Had client verify the port forwarding data and it is correct. Does he need to restart the router to enable port forwarding?
View 4 Replies View RelatedHow to forward Port 123 on this router?
View 4 Replies View RelatedWhen ever I try to port foward It always says the ip adress should be in the same subnet as the lan ip adress when i'm using my public ip adress then I changed my ip adress to the public ip and it worked but no one can't get in the server.
View 1 Replies View RelatedI have followed all instructions to forward port 22 on my netgear router WNDR 3400v2. It says it forwarded but according to port tracker. Its closed. I am having this with two different locations. All IP addresses are correct and the router can ping them. It just wont open. Using SSH program for port 22 access.
View 10 Replies View RelatedI'm trying to set up a Minecraft server so I can appear to be a hero to my 8 year old son. I have to forward a port to 25565 adn I've followed all the instructions on how to do this on my netgear DGND3700v2. I've also turned off my Windows 7 firewall, but when I go to a test website, I still get a message saying the port is closed. I don't have a static IP address, is this absolutely critical or does it just mean that the boys will have to log on to a new IP address each time they want to play?
View 1 Replies View RelatedAt work, our proxy blocks everything except for HTTP(S), FTP, and a small handful of other company-specific ports on the _outbound_ connection. On my router, I like to port-forward SSH to my Linux computer server at home but since at work IT blocks out-bound SSH, I have to masquerade the SSH port-forward on my server to get past the corporate proxy. Normally, I've done this in the past by doing something like WAN:9090 (allowed by my IT) --> LAN:22 in my router's port forwards to get SSH routed to my Linux box from the web.
I recently purchased a Netgear FVG318 and it doesn't look like it supports this kind of configuration. In the Security->Firewall Rules->Inbound Rules section of the router configuration I see how to do a port-forward but they only have a drop-down selection of common protocols and will simply 1:1 forward the ports. It doesn't look like it allows to do mis-matched ports on the forward like I'd like to do.
I need to upgrade my switch to something that has 24 ports. This is for home, simply to sling media around the house, etc. So 3-4 computers, boxes, AVR's, HTPC's, blah blah blah - just the usual stuff.
I was looking at the Trendnet TED-S24DG and the Netgear JGS524 (both are under a couple of hundred bucks). The cheaper the better to a degree - rack mount is preferrable. Both are unmanaged. Jumbo frames?
I need to buy a new router for my network (using DIR-655 for last 4-5 yrs). Would like to move to a dual band product.As I live in Canada and would like to purchase VPN to rid the geo tagging and enjoy US media content. I plan to buy a wifi router that supports VPN to accomplish my goal.
So, from modem, to router, then to a 24GB port switch, devices include 3 wired computers, tvs, boxes, players, blah blah blah, etc.
Placement of the router is in my basement (has to be as this is where all my network/modem/server rack). I plan to also purchase an AP and place it on the 2nd floor of my home (2200sq ft) for coverage in the house.
Question is, once I add the VPN to get US content, there will be times when I want my own PC to NOT be on the US VPN.So, based on the above which dual band router under $130 and how much for the AP? And how do I setup it up so that my personal PC and be on and off the VPN?
Right now I can get a E4200v2 refurb for 60 bucks from NC$X? I was looking at Asus N66, but perhaps its too much for my needs?
I have set my Netgear WGR614 to a static IP, and I have tried port forwarding but I can't. I've tried disabling SPI Firewall and it still don't work. I have also tried enabling bridge settings on my connection in my modem settings, but that just wouldn't let me back on my internet. How I can port forward?I have a westell 610015.
View 3 Replies View RelatedI am trying to set my NETGEAR N150 DGN1000 . I can connect to the router via wireless but no Internet.
Theh INTERNET PORT indicator on the router is goes to OFF mode.
Before I try this I had Internet with the same line with a different router.. I am not too sure what's wrong with this.. Could any one come up with a possible solution..
I have a 1Gb network set up whereby I have a Netgear 26 Port 1000Mbps unmanaged network switch at the heart of my home network. What I have the problem with is devices connected on any one of my 3 300Mbps access points drop out showing no internet but they really mean no network access unless i disconnect and reconnect or switch to another access point. Other things I get happening is one min i have a transfer speed wired connection to wired connection of 35Mb per second and then I only have 8 or less. I am wondering if I have cable issues but before I went out and spent about �100 on new belkin cat6 cable I would ask if there is software I can use to test all the devices on the network so I can replace the faulty item.
View 3 Replies View RelatedI have a Netgear wnr2000v3 Router connected to my Motorola Surfboard Gateway.I have a freePBX Server (virtual running off of VMware Workstation 8) that needs ports 10001-20000 and 5060 forwarded to the server at 192.168.1.110
I added the portforwarding as in this photo:
When I use a port tester it still says "Port 5060 is closed"I have also turned off Windows Firewall. What else could be blocking these ports?
I cant work out how to get my Netgear DGN2200v3 to port forward.Portforward.com describes how to port forward for a Netgear DGN2200 but NOT for the DGN2200v3.The difference between the DGN2200 and the DGN2200v3 is that when I log into the router and go to port forwarding/port triggering there is no box to fill in the server IP address. It just says service name, service type, starting port, ending port.
View 1 Replies View Relatedwe have 100 Cisco 881 routers in our network and they all work fine to Linksys, 3Com, etc switches. The problem we have encountered is interfacing to Netgear switches. Netgear switches use autosensing on their ports and it does not seem to be compatible with MDIX autosensing on the Cisco 881 4 port LAN hub that is standard on the 881 router. Would a cross over cable resolve the problem? Since both run autosensing MDIX they never synch - so likely a cross over would not do much. I see this with all types of Netgear smartswitches. If you put a small switch between the Netgear switch and the 881 Cisco router everything works fine except for getting port 9000 traffic through.
View 5 Replies View RelatedI have a Netgear WRG614 and a Westell 610015 Modem. I need Port Forwarding. I have tried setting up a static IP then Port Forwarding but it doesn't work. I have tried port forwarding from the modem but it doesn't work. I wanna forward ports "80, 9958, and 5816". The reason is because I am gonna host a game server on my computer.
View 14 Replies View RelatedI recently purchased the netgear n300 ADSL2+ modem router. I have tried all day to get it to work, but I have not have any success.
ISP: Verizon (Now frontier I think)
DSL light will be solid green, along with the port, wifi, etc... But the internet one stays solid red.I've tried changing dns settings and things, but to no avail. Though I am able to login to the router, and I can get internet if I directly connect to the modem.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersRobert>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Robert-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
I noticed in the router settings that the internet port had no ip address, as in it was just 0.0.0.0.
I have just installed a Linksys SLM2024 switch in my house and it - along with my Netgear CVG 824g router - delivers internet access to around 20 devices requiring IP's.
My problem is: The Netgear router can only assign IP adresses in the 192.168.0.XXX range. which means I cannot access the Linksys SLM2024's online configuration page which is located at 192.168.1.254. Are there any way to force the Linksys switch into having an IP in the 192.168.0.XXX range? I could try and connect only my laptop, the switch and an old router I have in a network and letting the DHCP server in the old router give my switch the correct IP.
I just updated the firmware on the WNR1000v3 router. However all the port forwarding configs that were set up previously have become "ghosts". They do not show up on the list nor work, but I cannot add a new entry.
View 2 Replies View RelatedI have been having problems with my router. I have a Net gear N300 v2, but I am not asking for support with said router. Forwarding network traffic from the Internet to a server and then have it properly re-routed. I have never done this sorta thing before, but I want to go into a career in I.T. when I'm older. As a side note, I have already figured out that ditching the router requires to have a software DHCP server, which I am using Windows Server 2008 Data center and it's built in role as DHCP server.
DNS is also configured. The modem a Motorola Surf Board is connected directly to a Cisco Catalyst 2950, and that connects all of the rest of the network, also via a 3Com SUper Stack Hub, and a little 8-port HP Advance Stack J2610A, which connects to all of my wireless AP.
I'm searching for a managed switch that allows me to not only mirror a port/ports, but also to still use the destination port for the mirrors as a link to the internet/the rest of the network. Aside from this, I still need the VLAN functionality of good switches, and ideally PoE provided, too.
I have seen the majority of the features of this in the NETGEAR GS108E (http:url...), but this doesn't provide PoE to the ports and also requires Windows to log into.Is this a feature of many switches? I can think of many snooping applications where it would be incredibly useful.
I am trying to set up a custom service on my netgear configuration page. I have a netgear router model# Wnr834m. every time i click the "add custom service" button the page redirects to "system authentication failed" and logs me out. What can i do to set up the new port?
View 1 Replies View RelatedI have Counterstrike Scource and am wanting to setup a deticated server. I have a netgear router with 27015 port open and my nat type is open, however it keeps on giving me the "steam validation rejected" error. BTW it works fine on LAN, just not online.
View 2 Replies View Related8 Port Gigabit Switch, HP 1810-8G, Netgear GS108Tv2 and Dell PowerConnect 2808, which one is better for LACP Link Aggregation?
The Netgear GS108Tv2 has more function than the other two, but I don't know the Netgear is stable or not?
is it possible to connect the wan port of a cable modem to a lan port of the home network? the reason is, i need some wifi access and more ports to my wired network, and the most reasonable solution would be a cable modem router with wifi and 4 ports just plugged into one of my routers.
View 2 Replies View Relatedwhen i click on connect to network nothing happens. it doesn't do anything, but if i plug in my old router it will connect just fine. It's just the new router
View 1 Replies View RelatedNetgear FS605 v3 wont connect to both my ps3 and my pc. It can only get internet to either my pc or my ps3.
View 1 Replies View RelatedI have a functioning wireless network at home, but I can't get my computer to connect to the internet. I bought a new wireless usb adaptor (Netgear N-150, WNA1100VC) and tried to install it. The computer at first connected to the internet, but the next day it did not. I unistalled the software and tried to reinstall it, but I got an error message saying the driver was not digitally signed and I should contact the provider. I have done this, and Netgear have given me instructions on how to fix. The problem is that now when I packed up my computer and re-assembled so I can plug the ethernet cable directly into it, I still can't connect to the internet.I get a message saying I'm connected to the wireless network, but can't connect to the internet.When I click on the "Diagonose Problem" it says the following:Windows Network Diagnostics Window.There might be a problem with one or more network adaptors on this computer
1. The network adaptor "Realtek RTL8168C (P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)" is experiencing driver or hardware related issues
2. Make sure your internet protocol bindings are correct - Ensure that "Internet Protocol Version 4 (TCP/IPv4)" and "Internet Protocol Version 6 (TCP/IPv6)" are selected in the configuration for the network adaptor "Local Area Connection"[code]
how do i connect xbox 360 to the NETGEAR
View 1 Replies View Relatedi have two computers in my house, the main one is connected to the internet with a Netgear N600 router. Computer 2 connects to that connection wirlessly with a D-link adapter.However after i reinstalled the OS to the main one, computer 2 suddenly is unable to even see the connection. i checked my smartphone which also used to connect when i was home and that can't see the connection either.
View 1 Replies View RelatedOne is able to connect from first Cisco router to console port of second Cisco router(routers are connected with rollover cable) using for example following configuration on the first router:
View 4 Replies View Related