NETGEAR GS108E - Smart / Managed Switches That Allow Outbound From Mirror Port?

Nov 12, 2012

I'm searching for a managed switch that allows me to not only mirror a port/ports, but also to still use the destination port for the mirrors as a link to the internet/the rest of the network. Aside from this, I still need the VLAN functionality of good switches, and ideally PoE provided, too.

I have seen the majority of the features of this in the NETGEAR GS108E (http:url...), but this doesn't provide PoE to the ports and also requires Windows to log into.Is this a feature of many switches? I can think of many snooping applications where it would be incredibly useful.

View 1 Replies


ADVERTISEMENT

Cisco WAN :: Interface Netgear Smart Switch To 881 LAN Port

Dec 16, 2012

we have 100 Cisco 881 routers in our network and they all work fine to Linksys, 3Com, etc switches.  The problem we have encountered is interfacing to Netgear switches.  Netgear switches use autosensing on their ports and it does not seem to be compatible with MDIX autosensing on the Cisco 881 4 port LAN hub that is standard on the 881 router. Would a cross over cable resolve the problem?  Since both run autosensing MDIX they never synch - so likely a cross over would not do much.  I see this with all types of Netgear smartswitches.  If you put a small switch between the Netgear switch and the 881 Cisco router everything works fine except for getting port 9000 traffic through. 

View 5 Replies View Related

Cisco Switches :: Access CLI Mode In Sf 302-08p 8-port 10/100 Managed?

Dec 13, 2011

how to access the CLI mode in  cisco sf 302-08p 8-port 10/100 Managed switch. I treid the every method they mentioned in the Admininstration guide.I am not able to enter the command debug-mode and comand menu after resetting the default password. After logging in, its directly guiding me to switch main menu.

View 3 Replies View Related

Cisco Switches :: SG 300-52 Port Gigabit Managed Switch - Cannot Telnet Nor SSH?

Nov 16, 2011

We have recently purchased SG 300-52Port Cisco Switch to support our Network but they constantly having some bizarre issues or I assume bugs, i.e. we cannot Telnet nor SSH to the switch now, whereas we were able to SSH before, we have set them up for Remote Log Services to get some syslogs and reports but no report have been generated nor logs,
 
I have done some testing through Wireshark and there are absolutely no reports / logs.We have some real issues with this switch and it’s hard to believe that this is a Cisco Product,
 
SG 300-52 Port Gigabit Managed Switch
Firmware Version (Active Image ) : 1.1.1.8
Firmware Version (Non-active ) : 1.1.0.73
Boot Version : 1.0.0.4

View 6 Replies View Related

Dell 5324 - Managed Switches And Port Boot Time

Nov 29, 2012

I recently installed a Dell 5324 switch as my main switch and it's my first time using a managed switch at home. One thing I've seen as an issue in a corporate environment, and now here, is that managed switches tend to take a bit longer for a port to be active. Ex: a PC is turned off, I turn it on but if the PC boots up very fast the port may not be ready. All mounts fail. This is the issue I am facing with my HTPC. It runs Linux and has a SSD, and it has no UEFI bios to slow it down (which is good, I hate UEFI for that) so it's up and running within 5-10 seconds of pushing the power button. The network mappings fail because the port is not ready by the time it gets to the script that mounts everything.

View 8 Replies View Related

Cisco Switches :: ESW 540 8-port Way To Make Device Behave Like Boring In-managed Switch

Mar 18, 2013

I bought an ESW 540 8-port switch, mainly for the POE capability over all 8 ports, so that we can power some SPA50X phones.The concepts of a "managed" switch are challenging for a newbie.Is there a way to make this device behave like a boring "unmanaged" switch ??We have plenty of bandwidth, and don't need to be troubled by QoS and virtual LAN's, or all the security stuff at this time.Making this device work like an unmanaged switch (aka plug-and-pray).

View 2 Replies View Related

Cisco Switches :: Mac Filtering On 8-Port SG 200-08 Smart Switch?

Apr 25, 2013

Is this smart switch possible to do Mac Filtering? how to enable mac filtering on this device?

View 1 Replies View Related

Cascading Managed And Un-managed Switches

Oct 17, 2011

is it possible to cascade a managed cisco switch with an unmanaged switch via SFP LC Modules?

View 1 Replies View Related

Cisco Switches :: SG200 Apply The Smart Port Macro To Interface

May 23, 2012

I´m a IOS CLI fanatic. Its the first tiem that I have to configure a SB switch. Its very confusing, I want setup a voice vlan id as 200. but I don see that this value change when I try to apply the smartport macro to the interface.Its possible change a smartport macro?

View 1 Replies View Related

DGS-1224T How To Port Mirror All Ports

Dec 14, 2011

I just aquired a DGS-1224T and can't figure out how to port mirror all ports. Any utility for download? Web interface is limited on port mirror. possibly an additional utility? Manual looks much different than web interface, makes me think they have a configuration utility but I can't find a download link.

View 5 Replies View Related

Cisco Switches :: Cannot Get The SG200-8 To Mirror Any Traffic Other Than Ping (icmp)

Mar 11, 2012

Cannot get the SG200-8 to mirror any traffic other than ping (icmp).

Factory default settings, with port 7 src to port 1 dst on session 1.

Pings mirror just fine. But other traffic. such as web and ssh, is not being mirrored.

FW version 1.0.2.0

View 3 Replies View Related

Cisco Switches :: SG300-10 / SF302-08P - Missing Mirror Configuration On Firmware 1.1.2.0?

Jan 21, 2012

I have several SG300-10 and SF302-08P switches running with L2-mode, and after I upgraded their firmware to 1.1.2.0, they began to record the following logs every one hour.

- Severity: Warning

- Description: %COPY-W-TRAP: The mirror-config file is illegal due to failure of previous copy operation/s to mirror-config.Also I found that I didn't see the Mirror Configuration file on the Configuration File Table in the Configuration Files Properties page. 

View 6 Replies View Related

Cisco WAN :: ME6524 - SPAN Port Mirror With VACL On MPLS LDP Link

Mar 4, 2013

We have a ME6524 running as a MPLS P router. We want to mirror a port to capture a specific traffic stream (to a probe). As the port is an MPLS LDP port will this work, will both the VACL and SPAN work with MPLS tagged packets, or does the mirror and VACL work after the labels have been removed..?

View 1 Replies View Related

Cisco Switching/Routing :: To Mirror Port Only Http Get Packet On 4948 Or 6500

Feb 7, 2012

How to mirror port only http get packet on 4948 or 6500 ?

View 4 Replies View Related

Cisco WAN :: C3750 - Mirror Switch Port Traffic To Remote Host IP Address?

May 31, 2013

Is there any way to Mirror a CISCO C3750 Switch Port Taffic to a remote Host IP Address?I know Port Mirror (SPAN/RSPAN) can copy one Interface Packet to another Interface. But I am looking for a way to miror Switch Port Packets to a remote Host (having Public IP Address and running Wirehark). Is it possible?

View 9 Replies View Related

Routers / Switches :: Netgear And Westell Port Forwarding

Feb 23, 2011

I have set my Netgear WGR614 to a static IP, and I have tried port forwarding but I can't. I've tried disabling SPI Firewall and it still don't work. I have also tried enabling bridge settings on my connection in my modem settings, but that just wouldn't let me back on my internet. How I can port forward?I have a westell 610015.

View 3 Replies View Related

Routers / Switches :: Port Forward With A Netgear DGN2200 V3?

Oct 9, 2012

I cant work out how to get my Netgear DGN2200v3 to port forward.Portforward.com describes how to port forward for a Netgear DGN2200 but NOT for the DGN2200v3.The difference between the DGN2200 and the DGN2200v3 is that when I log into the router and go to port forwarding/port triggering there is no box to fill in the server IP address. It just says service name, service type, starting port, ending port.

View 1 Replies View Related

Cisco Switches :: No Command Line Interface On SF200 Small Business Smart Switches?

Sep 20, 2012

we just received 5 new SF200-48 Smart Switches for small business. I noticed only way I can configure them is by using the web gui. Is there a way to enable good old CLI?

View 6 Replies View Related

Cisco Switches :: SLM2048T Can Be Configured As Managed Switch

Feb 25, 2013

such as the SLM2048T can be configured as an managed switch.  Our schools have laptop carts and we want to put switches in the carts so that the laptops will be plugged into the network when not in use and software installs, updates, etc. can be pushed to the laptops while they're in the cart instead of waiting for them to be taken out, powered on and pushed over wireless.  I can find a 10/100 48-port unmanaged switch, but I really want a gigabit unmanaged switch, but they don't seem to exist so I was wondering if a managed switch can be configured and used as an unmanaged switch.  I don't want to have to assign a static IP address to the switch.

View 1 Replies View Related

Cisco Switches :: SF 302-08 Managed Switch - WiFi Hotspot

Aug 31, 2011

I have bought this switch to try :
 
We (our company) have a new glass fiber internet from a provider with 5 ip-addresses in an /29 range. I try the accomplice the following. On port 1 comes the output from the provider. On port 2 till 7 I want to separate the ip addresses so can distribute these addresses to our lan, to a wifi hotspot for external company visitors etc. So on port 2 a ip to the lan, on port 3 a ip to wifi router

View 8 Replies View Related

HP ProCurve 1800-24G / 24 Port Managed Gbit Switch?

Oct 3, 2011

Any good 24 port rack mountable Gigabit switch, that is managed. Is a HP ProCurve 1800-24G 24 port gigabit ethe switch J9028B decent ? Will i be happy ? I have currently a Dell 5224, that works, but it's getting old and for the life of me can't find rack ears AT ALL!! and i want it mounted so i can finish my rack installation.

budget is around 250-300$ 24 ports all gigabit and manage able for vlans etc etc.

View 19 Replies View Related

Cisco Switches :: Setting Up New SF-300 Managed Switch - Not Passing Traffic

Sep 15, 2011

I just purchased a new SF-300 managed switch for the purpose of using it on the DMZ, so we can mirror the internet port and monitor traffic for my company.  I have set it up from the web interface to miror port 1 to port 2 and that's pretty much it.  I decided to test it before putting it in production, by hooking it up to one of my core network switches, connecting a laptop to it and trying to get online.  It doesn't even connect to my DHCP server to get an IP address.  If I put the laptop back on the same subnet as the switch management IP, I can still connect to the switches web interface.  Isn't the basic functionality of a switch to pass traffic? 
 
I should also mention that I'm not a network engineer, so there might just be something I'm missing with regard to a default setting that needs to be switched off?

View 4 Replies View Related

Cisco Switches :: Is Managed SG200D Version Any More Reliable / Dependable For 24 / 7 Usage

May 23, 2013

I need an 8 port switch to mange 6 web servers and while I haven't been able to decide whether or not I need a managed switch, I have recieved conflicting answers from sales reps with respect thier construction.In a 24/7 environment, is an SG100D-08 any different than a managed SG200D-08 switch in terms of the product components?Is the managed SG200D version any more reliable/dependable for 24/7 usage?

View 2 Replies View Related

Cisco Switches :: Connection To SGE2000 Managed Switch Web Interface Lost

Apr 19, 2012

We have a standalone Cisco SGE 2000.
 
We lost connectivity to the web user interface - it no longer responds on the configured IP address.From the manual we see that by default the switch get its IP address via DHCP - but we find no record of any ip address assigned to this switch.Is there a IP address that this unit defaults to when DHCP is not available? Also - what is the best way to connect to the console using Windows 7?

View 1 Replies View Related

Protocols / Routing :: Forcing Use Of Specific Outbound Port?

Jan 24, 2013

force something such as a Telnet client to use a particular outbound port when opening the TCP connection?

View 3 Replies View Related

Cisco WAN :: Outbound Port Forwarding And Redirecting 800 Series

Sep 18, 2011

I've tried a few different ways unsuccessfully so thought I'd ask here.I'm trying to forward an outgoing port on a Cisco 800 series router. ie. When a user inside the network connects to the router on port 1234, it opens up the same port on a server on the Internet.

View 2 Replies View Related

Linksys Cable / DSL :: WAG160N V2.00.20 FW - Outbound Connections To Port 25 Preventing?

Apr 8, 2012

apparantly there is a bug in WAG160Nv2 firmware (version:V2.00.20 which is the latest). we had problem connecting to an outside smtp server using telnet. then out of frustration i reset the router to factory settings. then suddenly connecting to smtp server on port 25 was not a problem. then a few hours later, without doing any special changes to the settings, it's now again not possible to telnet to external server. apparantly something prevents outbound connections to port 25 to be established

View 1 Replies View Related

Cisco Firewall :: ASA 5510 - Open Outbound Port For Specific IP

Dec 6, 2012

We have a ASA5510 and I need to open port 22 for a speacific IP in our LAN outbound only.      

View 15 Replies View Related

Cisco Firewall :: ASA5505 - Outbound Traffic Ceases Even Though Port Is Up

Mar 10, 2011

I've had a Cisco ASA 5505 firewall connected to a cable modem (Virgin Media, UK) for the past 3 years.  In the last 6 months or so I have noticed that the ASA would drop the outside (internet) connection intermittently, usually at least once every 1-2 weeks - the interface still shows as being up but no traffic crosses it, and computers on the inside network abruptly lose internet connectivity.  Rebooting the ASA or administratively shutting down the interface and bringing it back up again would cure the problem straight away until the next time it happens.
 
In the last couple of days however despite nothing having been changed in the configuration the frequency of this connection drop has increased to the point where I would lose access to the internet within an hour of rebooting the ASA.  It does not seem to matter whether or not there is traffic currently going out or not, inside computers just appear to suddenly lose internet connectivity.
 
I have tried the following without success:

1) I completely wiped the configuration (configure factory-default)

2) I changed the port the cable modem was connected to (eth0/0 -> eth0/7, changing switchport vlan accordingly)
 
I thought perhaps 2) had fixed it but it lasted a whole 2 hours before I woke up this morning to find that none of the internal equipment had internet access despite the fact eth0/7 was showing as up/up in ASA CLI.
 
This morning I manually set the eth0/7 port to "speed 10" (10Mbps, full duplex).  It was previously set to be auto-negotiation (default) on both speed and duplex.  As of this post it has managed to keep the outside connection up for 3 hours - but I'm not optimistic that it is fixed.
 
Interface counters have never shown any collisions, errors, etc - only packets input and output as expected.
 
Since the problem persisted across ports (eth0/0 -> eth0/7) I'm wondering whether or not the problem could either be faulty memory, or some kind of speed/duplex incompatibility between the cable modem and ASA.

View 13 Replies View Related

Cisco Firewall :: Blocking Outbound Port 80 Traffic Using ASDM On ASA 5510

Nov 26, 2012

I am attempting to block outbound traffic for a specific PC on my LAN using the ASDM.

View 2 Replies View Related

Cisco Firewall :: UDP Port 9500 Open Inbound / Outbound To Specified IP Addresses

Feb 28, 2012

I have a weather station at our high school that needs UDP port 9500 open inbound/outbound to specified IP addresses.

Cisco PIX Security Appliance Software Version 8.0(4)
Device Manager Version 6.1(5)57

View 1 Replies View Related

Cisco Switching/Routing :: Inbound And Outbound Per Port Bandwidth Limitation 3560

Feb 21, 2013

I'm intending to purchase a switch for work,and I need to limit the bandwidth of one of the ports to 25 Mbit upload and 25 Mbit download (we have 100/100 Mbit connection and the customer is only paying for 25). I been trying to find information on how this could be "properly" done and what kind of switch I need to buy. As far as I have understood, most L2+ switches support outbound rate limiting, but not inbound, and as I only want the customer to have 25 mbit up and down, I need both.
 
I been looking at a Cisco Catalyst 3560 switch, and I'm first and foremost wondering if I can limit the inbound AND outbound bandwidth on this switch? Perhaps it can even be done on a simpler, cheaper, switch - as I rather not spend more money then necessary?
 
Lastly, how to do it, limit the inbound and outbound bandwidth on a single port (perhaps on the above mentioned switch, if possible), to 25 Mbit?

View 3 Replies View Related

Cisco Switching/Routing :: How To Setup Traffic Shaping On 4500X Outbound Port To WAN Routers

Mar 26, 2013

We have some ASR WAN routers which have a dedicated 400M interface to a remote site.
 
Servers on our Local network source the data through some firewalls via 10G interfaces, which connects to 4500X WAN switches then to the Routers on 1G links.
 
The sources are rate limiting the traffic but the routers are periodically dropping packets which I think is mostly due to burstiness in the traffic between as it traverses through from 10G links to 1G then to 400M. 
 
How to setup traffic shaping on the 4500X outbound port to our WAN routers.I'd like to see if we could buffer and smoothe out the traffic as it exits the 4500X WAN switch 1G port to the WAN Routers.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved