Cisco Switches :: Is Managed SG200D Version Any More Reliable / Dependable For 24 / 7 Usage
May 23, 2013
I need an 8 port switch to mange 6 web servers and while I haven't been able to decide whether or not I need a managed switch, I have recieved conflicting answers from sales reps with respect thier construction.In a 24/7 environment, is an SG100D-08 any different than a managed SG200D-08 switch in terms of the product components?Is the managed SG200D version any more reliable/dependable for 24/7 usage?
View 2 Replies
ADVERTISEMENT
Oct 17, 2011
is it possible to cascade a managed cisco switch with an unmanaged switch via SFP LC Modules?
View 1 Replies
View Related
Apr 15, 2012
how do I get my hard drive to work thru my belkin router usb port?
View 1 Replies
View Related
Feb 26, 2013
I have a 2 Cisco 3750X stacked working as CORE switches but not in production yet showing a high CPU utilization and I would like to see with you whether you think this is normal or a IOS upgrade/downgrade should be performed.
I have very low traffic coming through as this is not yet in production:
122222333331111122222222222222222222222221111122222222222222 933333999999999922222777772222277777333339999922222111111111 100 90 80 70 60 50 40 ***** 30 ***** ***** ***** 20 ********************************************************** 10
[Code].....
View 4 Replies
View Related
Feb 25, 2013
such as the SLM2048T can be configured as an managed switch. Our schools have laptop carts and we want to put switches in the carts so that the laptops will be plugged into the network when not in use and software installs, updates, etc. can be pushed to the laptops while they're in the cart instead of waiting for them to be taken out, powered on and pushed over wireless. I can find a 10/100 48-port unmanaged switch, but I really want a gigabit unmanaged switch, but they don't seem to exist so I was wondering if a managed switch can be configured and used as an unmanaged switch. I don't want to have to assign a static IP address to the switch.
View 1 Replies
View Related
Dec 13, 2011
how to access the CLI mode in cisco sf 302-08p 8-port 10/100 Managed switch. I treid the every method they mentioned in the Admininstration guide.I am not able to enter the command debug-mode and comand menu after resetting the default password. After logging in, its directly guiding me to switch main menu.
View 3 Replies
View Related
Aug 31, 2011
I have bought this switch to try :
We (our company) have a new glass fiber internet from a provider with 5 ip-addresses in an /29 range. I try the accomplice the following. On port 1 comes the output from the provider. On port 2 till 7 I want to separate the ip addresses so can distribute these addresses to our lan, to a wifi hotspot for external company visitors etc. So on port 2 a ip to the lan, on port 3 a ip to wifi router
View 8 Replies
View Related
Sep 15, 2011
I just purchased a new SF-300 managed switch for the purpose of using it on the DMZ, so we can mirror the internet port and monitor traffic for my company. I have set it up from the web interface to miror port 1 to port 2 and that's pretty much it. I decided to test it before putting it in production, by hooking it up to one of my core network switches, connecting a laptop to it and trying to get online. It doesn't even connect to my DHCP server to get an IP address. If I put the laptop back on the same subnet as the switch management IP, I can still connect to the switches web interface. Isn't the basic functionality of a switch to pass traffic?
I should also mention that I'm not a network engineer, so there might just be something I'm missing with regard to a default setting that needs to be switched off?
View 4 Replies
View Related
Nov 16, 2011
We have recently purchased SG 300-52Port Cisco Switch to support our Network but they constantly having some bizarre issues or I assume bugs, i.e. we cannot Telnet nor SSH to the switch now, whereas we were able to SSH before, we have set them up for Remote Log Services to get some syslogs and reports but no report have been generated nor logs,
I have done some testing through Wireshark and there are absolutely no reports / logs.We have some real issues with this switch and it’s hard to believe that this is a Cisco Product,
SG 300-52 Port Gigabit Managed Switch
Firmware Version (Active Image ) : 1.1.1.8
Firmware Version (Non-active ) : 1.1.0.73
Boot Version : 1.0.0.4
View 6 Replies
View Related
Apr 19, 2012
We have a standalone Cisco SGE 2000.
We lost connectivity to the web user interface - it no longer responds on the configured IP address.From the manual we see that by default the switch get its IP address via DHCP - but we find no record of any ip address assigned to this switch.Is there a IP address that this unit defaults to when DHCP is not available? Also - what is the best way to connect to the console using Windows 7?
View 1 Replies
View Related
Nov 29, 2012
I recently installed a Dell 5324 switch as my main switch and it's my first time using a managed switch at home. One thing I've seen as an issue in a corporate environment, and now here, is that managed switches tend to take a bit longer for a port to be active. Ex: a PC is turned off, I turn it on but if the PC boots up very fast the port may not be ready. All mounts fail. This is the issue I am facing with my HTPC. It runs Linux and has a SSD, and it has no UEFI bios to slow it down (which is good, I hate UEFI for that) so it's up and running within 5-10 seconds of pushing the power button. The network mappings fail because the port is not ready by the time it gets to the script that mounts everything.
View 8 Replies
View Related
Mar 18, 2013
I bought an ESW 540 8-port switch, mainly for the POE capability over all 8 ports, so that we can power some SPA50X phones.The concepts of a "managed" switch are challenging for a newbie.Is there a way to make this device behave like a boring "unmanaged" switch ??We have plenty of bandwidth, and don't need to be troubled by QoS and virtual LAN's, or all the security stuff at this time.Making this device work like an unmanaged switch (aka plug-and-pray).
View 2 Replies
View Related
Nov 12, 2012
I'm searching for a managed switch that allows me to not only mirror a port/ports, but also to still use the destination port for the mirrors as a link to the internet/the rest of the network. Aside from this, I still need the VLAN functionality of good switches, and ideally PoE provided, too.
I have seen the majority of the features of this in the NETGEAR GS108E (http:url...), but this doesn't provide PoE to the ports and also requires Windows to log into.Is this a feature of many switches? I can think of many snooping applications where it would be incredibly useful.
View 1 Replies
View Related
May 5, 2013
I am interested in the QuickVPN solution for a Mac.I am getting mixed messages in my searches.If not, what is the secure, reliable way to use an RV-120W with a Mac?
View 1 Replies
View Related
Apr 3, 2013
however recently when i check my internet usage log on my wireless company (Rogers) the usage is totally off from what my bandwidth tracker shows me. So i decide to turn off my wifi and see what happens, there has always been this weird wifi connection appearing whenever my wifi appears, then afterwards when i turn off my wifi the suspicious wifi connections disappear. is this possible that someone is using our wifi? i might just be overreacting but it has brought me to concern that if the usage continues my family will have to end up paying over $30 for extra internet use. it is very frustrating me because when i check my DHCP client table it only shows 3 connection, ethernet - my desktop which is not turned on, 2 wireless connection - my laptop and my sister's laptop.
View 6 Replies
View Related
Feb 17, 2012
I will be doing some traveling this summer and need reliable access to the internet for my laptop, and smartphone if possible. What would be the easiest way to be connected anywhere? Most places I will be wont have any wi-fi signal at all.
View 3 Replies
View Related
May 21, 2012
I have a DIR-655, hardware B1, firmware 2.03NA. Sporadically, generally after the router has been on for 24 hours, I lose wireless Internet (WAN) connectivity. I can still connect just fine to the router interface. And if I plug in hardwired Ethernet, I can access the Internet just fine.I previously had a DIR-615 in operation with no problems.
-ISP modem Motorola SB6121 (stand-alone cable modem)
-QoS/traffic shaping off; also disabled advanced DNS (tried OpenDNS as well as Comcast defaults)
-DNS relay enabled
-Using reserved IP addresses on the local network, all devices are set to DHCP
-Enabled/disabled UPnP/multicast
-Tried all firewall options, including disabling
-Wireless using Mixed 802.11n/g; tried channel width 20/40 and just 20. Disabled auto channel scan and forced to -ch11. No other wireless interfering. Using WPA2 only, AES, with a 63char key.
-Disabled WISH
-Disabled WLAN partition, WMM enable, short GI.
-Cat6 between modem and router
Again, hardwired LAN connection seems to be fine. I've already RMA'd the router once.When wireless Internet doesn't work, it seems to be all affected devices (iPhone/iPad/MacOS/WinXP/Roku).
View 6 Replies
View Related
Sep 14, 2009
McAffee scan of acs 1113 appliance running the 4.2 build 124 patch 12 version reports that a medium vulnerability exists because the system has SSH version 1. Any way to specify only version 2 or turn off SSH?
View 9 Replies
View Related
Jan 29, 2012
I was configuring route tracking at a client with several sites to route across GRE tunnels and being able to detect a failure of the main site. To my surprise when configuring a 2800 series router (after sucessfully configuring a 1800 series on the same infrastructure), a 2821 with IOS 12.4(24)T2 IPbase, the commands for ip sla object tracking don't show up.The feature navigator says the router supports this, but it just won't take the commands (also tried older versions of the commands such as "ip sla monitor.." and "rtr .." to no avail).
View 5 Replies
View Related
Feb 5, 2013
I just bought a new Linksys E2500 router from Best Buy and I need optimizing my router settings so I can get the absolute best performance out of it. Staying connected and keeping speeds high are a must.I have been noticing connections cutting out at time. It is frustrating when I lose my internet.we have ~3000 sq foot house... 3 levels (basement, first, second).We don't use all of these at the same time but we have: 2 laptops, 3 iphones, ipad, and a PS3 for online gaming.
How can I get the absolute best, most reliable connection and speeds out of my router so we don't experience disconnects?I bought the RE1000 range extender... having installed it yet because the install CD that came with it is the wrong CD (It came with the E900 install CD... which is for a router)I bought the N600 USB adapter which I guess is supposed to update your wireless card for your laptop. I am using that but bars seem low..
View 9 Replies
View Related
Apr 2, 2013
I have meny concerns but one is intel Centrino Wireless 2230 2X2 bgn + Bluetooth a not so reliable wirless hookup?
View 1 Replies
View Related
Feb 29, 2012
Looking through the logs of our SF300 switches I am seeing errors for SNTP:
%SNTP-D-NTPBADVER: NTP server version not compatible
We have two NTP servers listed, both are MS Windows 2008 R2 domain controllers. The actual time on the switches seems to be correct but we are still receiving these errors?
View 1 Replies
View Related
Apr 3, 2012
We have bought four identical 3750X switches with identical SW-images: 12.2(55)SE3 C3750E-UNIVERSALK9-M
We initially connected two switches, this resulted in forming a stack.With the other two switches we wanted to do the same thing. However, we received the following message:
%STACKMGR-5-MAJOR_VERSION_MISMATCH: Major Version Mismatch (Local 1 - Received 6) with neighbor-1
Both switches will not see each other and the output of show switch stack-ports shows only one switch and both stack ports as being Down.
I did some digging using the show platform stack-manager all command to find out that three of the 3750X's have the stack version number 1.45 and one has 6.45. This would obviously indicate the reason behind the mismatch, but the SW-versions on all new switches are identical!
Checking the CISCO site explains that mismatching of Major version is critical:
Major Version Number Incompatibility Among Switches
Switches with different major Cisco IOS software versions usually have different stack protocol versions. Switches with different major version numbers are incompatible and cannot exist in the same switch stack.
That's all I could find. Nothing about changing the major version number, so all I can suspect is that IOS version needs to be the same.
View 5 Replies
View Related
Jun 9, 2003
I'm working for KOREA TELECOM, and currently providing MPLS VPN.We're planning to provide our customer with traffic report using NetFlow..
I read some documents which reads Netflow ver.9 can be enabled on Cisco GSR 12000 Series, but no mention about catalyst switches. Netflow ver 9 can be activated on catalyst 6500 series.. because the point where switch is located already have mpls encapsulated packet ( mpls vpn packet).
View 3 Replies
View Related
Jan 16, 2012
Can we use ACS 4.1 version recovery disc on 4.2 verison to recover the forgotten password.
View 1 Replies
View Related
Mar 11, 2013
which version of prime infrastructure supports wlc5508 version 7.4
View 2 Replies
View Related
Apr 3, 2012
provide me with the important links which can show me how to do the software upgrade for my ASA 5520 ver 7.0(1) to ver 8.4 ? as well as the ASDM
View 10 Replies
View Related
May 10, 2011
i am using Cisco ASA 5510 with ASA Version 8.0(4) and memory 256MB. me to Upgrade it to 8.3
View 6 Replies
View Related
Apr 30, 2012
I need a ≥ 8 port layer 3 managed switch. What would be the cheapest solution for this?I've been looking at some stuff like Cisco 4908G, but that only supports 1000base-X. I need something that supports the standard 1000base-T. I've also looked at a Cisco WS-C3508G-XL-EN, but correct me if I'm wrong, this is only layer 2?
View 11 Replies
View Related
Jul 19, 2011
How many VLANs can be managed with the AIR-AP1252AG-E-K9 APs ? My customer wants to manage 4 VLANs, data, voice, guest and another.
View 2 Replies
View Related
Jan 15, 2012
Some days ago, I download standard IOS image for 1262 and installed, now this 1262 AP can start up without WLC. but I don't know how to recovery this AP image, and let's startup / download the image from WLC and has been managed...Is that ONLY remove the existence image ? and it's will be auto find WLC ?
View 5 Replies
View Related
May 2, 2012
Because of licensing we want to keep some particular devices unmanaged via Inventory => Manage/Unmanage devices.But after some minutes all unmanaged set devices get back to managed. Its reproduceable many times.
View 3 Replies
View Related
Oct 11, 2012
I have a SG-300-20 Managed switch. I attached a picture of what I want to do. Is this possible to do? How would I go about doing it?
View 6 Replies
View Related
