Cisco :: Fault View CiscoWorks LMS 4.0.1?

Oct 23, 2011

I upgraded the LMS 4.0 with LMS 4.0.1 but now the events are removed of Fault View. The equipments than I am monitoring are: ME-3600, ME-3800 and ASR 9000. This is a configuration problem or I have to update something else?

View 1 Replies


ADVERTISEMENT

D-Link D-ViewCam :: 3.3 / Setup 4 Cameras To View With Remote Live View?

Apr 12, 2013

I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80   ....   85. The screen has only the option for 1  video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras  at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?

View 5 Replies View Related

Cisco :: LMS 4.0.1 DFM Fault Monitor No Devices Are Available

Jul 11, 2011

Despite there are all devices are managed in DFM (accorduing to Collection Summary Portlet or Rediscover devices) there are no devices in the Fault Monitor with the message "No devices are available"Does it mean, we have absolutly no faults in our network or does it mean that we have a problem with DFM?

View 2 Replies View Related

Cisco :: LMS 4.2.3 Fault Monitor Threshold

Mar 18, 2013

How to find out which Fault Threshold group a specific interface belongs to.The scenario is that in Fault Manager there is an alarm for which I want to change the Threshold Setting.

Example Alarm:
Event_Description HighUtilization
Device IP x.x.x.x
Device Type Routers
Fault Last Updated At 19-Mar-2013 09:44:25
Component IF-router2.x.x/26 [Tu187] [x.x.x.x]
[Code] .....

View 1 Replies View Related

Cisco :: LMS 4.0 Fault Monitor Error?

May 2, 2012

I try run Fault monitor feature in LMS 4.0, but I got error like this picture :

View 3 Replies View Related

Possible Wireless Card Fault?

Feb 2, 2013

I have a Sony Viao laptop with WinXp SP3 which is now 6 years old. We are currently renting a holiday home in the USA which has an unsecured network. We have two other laptops and they are connected, no problem. This morning my Sony worked fine on email and web access but I was having trouble on FTP. Then email stopped and then web.I have tried all the usual solutions. Delete the Network, restart etc etc.It clearly show the network (and also another secured network I cannot access). When I connect it shows "Acquiring network address" then just hangs. If I press, repair it hangs on "Renewing your IP address" Does the fact that it can see the networks and when I "ping 127.0.01" it seems to be OK, mean that it CANNOT be a hardware fault? I ask this partly because the WLAN switch at the front often does not seem to work (when it does work it is green and currently it IS green)

View 9 Replies View Related

Cisco :: LMS 4.2.2 - Fault Manager Does Not Resolve Hostname

Dec 13, 2012

This is Cisco Prime LMS 4.2.2 on Windows 2008 R2
 
As far as I understand it Fault Manager need to be able to do reverse lookup for ip adresses to show the correct name in the "device name" column. I have double and tripple checked and all devices that only is shown as an ip address do have a reverse in the dns used by the LMS server. The device is correctly registered and inventory have been run. If I hold the mouse pointer over the crosshair on the row of the offending device all info is shown including correct device name and fqdn.
 
The server is upgraded from 4.2.1 to 4.2.2 and we have the same problem before the upgrade.

View 2 Replies View Related

Cisco WAN :: ISR 1921 Crashing Saying Possible Software Fault

Nov 6, 2012

I have an ISR 1921.  Every now and then, it crashes saying "Possible software fault".  The system LED flashes amber and only a hard reset (power on/off) will reload the ISR.

View 2 Replies View Related

Cisco :: LMS 4.0 Fault Notification Groups Setting Up

Sep 11, 2012

I am trying to setup Fault Monitoring on LMS 4.0.  When I try to create a Fault Notification Group no devices are listed. They appear to be listed in all other places so I am at a loss as to explain why they are not appearing.

View 7 Replies View Related

Cisco :: LMS 4.2.2 Fault Monitor Suspend Device

Nov 6, 2012

i´m looking for two hours now and can not find a way to suspend a device in the Fault Monitor. We´re using LMS 4.2.2

View 1 Replies View Related

Cisco :: How To Exclude Interfaces From Fault Engine In 4.1

Oct 13, 2011

I have an inventory added to Ciscoworks and am getting alerts on interfaces that I want to exclude but for the life of me I can't figure out how to exclude interfaces. Any tips on how to exclude interfaces from the fault engine in 4.1.

View 3 Replies View Related

Cannot Use The Internet Connected But Fault Displayed?

Mar 18, 2012

i have trying for a few days to connect my HP G7000 notebook to the internet through my wireless but i have tried everything i can think without getting anywhere. I only got it a few days back for my daughter to do her homework ect, but can't get it to connect i see a post on here about updating drivers but i can't get it to connect to do this, then thought about downloading the driver update it may need to my laptop but i really dont want to download anything onto my laptop as its a different model with different drivers and dont want it to stop my laptop working.i get on the HP G7000 is cannot communicate with primary DNS server 194.168.4.100 then underneath that message it is saying Network diagnostics pinged the remote host but did not receive a response

View 3 Replies View Related

Cisco :: C3560C Could Not Find The Fault Discovery For 3 Switches

Jul 28, 2012

We are running LMS 4.1 and we have more than 150 devices.LMS could not find the fault discovery for 3 switches with partnumber WS-C3560C-12PC-S. This switches are considered as unknown.Ios version is c3560c405-universalk9-mz.122-55.EX3.bin But other things are ok. Inventory Collection ,Config Archive,  Topology Data Collection etc .  Is there any way to fix ths issue? We have compact switch WS-C3560CG-8PC-S, which is working perfectly for all  features.

View 4 Replies View Related

Cisco :: LMS 4.2.1 Fault Setup Doesn't Show Any Devices

Aug 8, 2012

LMS discoverd all my devices and updated the DCR. This devices are visible in DFM. For some of this devices i would like to change the threshold values. For some reason the devices are not visible in Monitor->Fault Settings->Seup->Threshold Settings (please see screenshot) Is there another approach to change the threshold values?

View 5 Replies View Related

Cisco :: LMS 4.2 Fault Monitor - Device Name And Frequency Of Events

Aug 26, 2012

I've just installed LMS 4.2, like it a lot so far. In the Fault Monitor, the Device Name column shows the device's IP address rather than the host name.  We need for it to show the host name, for ease of troubleshooting; most folks don't have the IP addresses memorized. Likewise, when an email is sent out for an event, the managed device field also shows up as the device's IP address.
 
The devices were all discovered with their IP addresses rather than a host name...should LMS have automatically found their host names?  Regardless, I manually updated all of the device's host names, yet they still display as an IP address in the fault monitor. 
 
Also, it appears I need to figure out some way to throttle alerts.  One particular device will report an event (ie a temperature out of range) dozens of times in a polling period...several per second, even though it's the same alert. 

View 2 Replies View Related

Cisco :: Fault Device Manager 4.1.0 And C4503E Devices

Jul 3, 2012

I am working with LMS 4.1 and FDM 4.1.0.
 
If I ask to the Supported Device Finder Portlet about C4503-E (SysObjectId: 1.3.6.1.4.1.9.1.874), it tells that this device is supported by DFM 4.1.0. Nevertheless, in DFM module each one devices appear in the "All Unknown Devices" group, with Error Code: Unsupported. CDP is enable in each one of these devices.

View 3 Replies View Related

Cisco :: 4.2 Device Is Stuck In Questioned State In Fault Management

Jan 14, 2013

Cisco Prime 4.2. My device is stuck in Questioned state in Fault Management. The device though can be pinged from the server. Actually, I can already manage the device and have archived its configuration. Problem is, on Fault Monitoring Device Administration, its on Questioned state even though I already tried to rediscover the device several times.Do I need to configure something on the server like put in the IP address and hostname of the device in the host file of Windows Server 2008?

View 1 Replies View Related

Cisco Application :: Configure Fault Tolerance On Pair Of 4710

Aug 17, 2011

I'm trying to configure Fault Tolerance on a pair of 4710s.  I followed the doc, and configured int gi1/4 as the fault tolerance interface, using vlan 12.  However the GUI is saying FT Vlan Down
 
The troubleshooting wiki said check the physical connectivity, but everything there looks good.  Each ACE can ping it's own IP, but not the router on that VLAN, or the peer.   They're connected to a dedicated VLAN in a switch, and I even tried a crossover cable to directly connect the two. [code]

View 8 Replies View Related

Wireless Connection Fault Dell Vostro 3000?

Jul 23, 2011

I am running my laptop on Windows 7 Proffesional 32 bit and it won't let me search for a wireless connection on the Control Panel I think it might be a problem with the wireless switch at the bottom as it doesn't show the wireless sign on the laptop. I have also tried running the laptop on Ultimate 64 bit but the problem continued to persist.

View 12 Replies View Related

Netgear 26 Port / Getting Network Fault Detection Software?

Mar 31, 2012

I have a 1Gb network set up whereby I have a Netgear 26 Port 1000Mbps unmanaged network switch at the heart of my home network. What I have the problem with is devices connected on any one of my 3 300Mbps access points drop out showing no internet but they really mean no network access unless i disconnect and reconnect or switch to another access point. Other things I get happening is one min i have a transfer speed wired connection to wired connection of 35Mb per second and then I only have 8 or less. I am wondering if I have cable issues but before I went out and spent about �100 on new belkin cat6 cable I would ask if there is software I can use to test all the devices on the network so I can replace the faulty item.

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961ND Upgrading Fault?

Feb 13, 2013

Region : UnitedArabEmirates
Model : TD-W8961ND
Hardware Version : V1
Firmware Version :
ISP :

I have two W8961ND, one for may office and the another one for use at my home, I tried to upgrade my device but during the upgrading the power supply plugged out and after that my device didn't boot up any more, so how can I repair my device, Is there any uploader for it's hardware chip because it doesn't work with it's LAN port or WIFI at this moment

View 1 Replies View Related

Dell :: Inspiron 1525 Wi-Fi / Wireless Reader Fault?

Feb 19, 2012

have a Dell Inspiron 1525 and when I revived it from years of neglect I have come across a problem that I cannot connect to a wifi connection.I know that in order for the wifi to be found the wireless in my laptop has to be turned on, however the light on the side does not switch on.So far I have installed drivers and even bought a new wireless WLAN card...And still it does not work.The laptop runs fine with wired connection but I want to use wireless?

View 3 Replies View Related

Cisco :: Ciscoworks Upgrade To LMS 3.1?

Jul 13, 2011

At present we are using the Ciscoworks LMS bunde 3.0. I would like to upgrade to LMS 3.1.
 
My Question: Is it possible to upgrade to LMS 3.1 with using the existing LMS 3.0 license.

View 2 Replies View Related

Tool For Network Management (Health Check / Performance And Fault Tolerance)

May 2, 2012

I am working as a Network Administrator. Here I have to manage Cisco Switches 2960 and 4500 Series, Active Directory, Database Server, Exchange Server, File Servers, IP Telophony, Fortigate Firewall, 2960 Router, Wifi availability within Company. Although, in case of any disaster we will contact to vendor for solution, but the management told me to deploy any Software/Network Monitor which will facilitate to manage all this, i.e, overall network Health check, Performance Measurement, Fault Tolerance.

View 2 Replies View Related

Cisco :: LMS 3.2 Logs Missed In Ciscoworks?

Aug 31, 2011

There was a interface down in one of critical devices in the network.that particular log is not captured by the ciscoworks(DFM-alerts).

View 1 Replies View Related

Cisco :: SSH Authentication Failure CiscoWorks LMS 4.0

Oct 24, 2012

I am trying to get CiscoWorks LMS 4.0 to connect to my routers in order to back up configurations, but I am getting SSH authentication failures reported in the router logs (and archiving fails).
 
The credentials LMS is using is a username and password with priviledge 15: the account is established in TACACS+. I can log into the devices directly with this user account.However, I cannot TFTP from the routers to the LMS either (I get a permission denied message in the router).
 
LMS did manage to fetch some configs, but 90% of my devices are having this issue.

View 4 Replies View Related

Cisco :: Link Download Ciscoworks LMS 4.0

Sep 11, 2011

I need download LMS 4.0 eval trial. But i can't see any link down on url...

View 1 Replies View Related

Cisco :: CiscoWorks With LMS 4.x NetShow Jobs URL

Jul 10, 2011

I have upgraded our LMS 3.x to the new LMS 4.x Version. have installed the new 4.x on an new server and importet the backup.
 
I have importet a Certificate and have enabled the Browser-Server Security Mode, Enabled I added some new Netshow Jobs which run every day.
 
I get the email from the jobs and the URL in the email but, URL
 
When i click on the link i only get:
 
Forbidden: You don't have permission to access /rme/NSViewJobResults.do on this server.
 
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
 
i must change the link to Urls there anywhere an option to edit the text which is send with the jobs, to fix the url?

View 4 Replies View Related

Cisco :: CiscoWorks LMS 4.0.1 - Could Not Generate The Report

Sep 26, 2011

I am running CiscoWorks LMS 4.0.1 since 6 months and I wanted to generate today a report about the interface utilization on 2 Cisco switches (Catalyst 3750G). The corresponding job is created, it runs and then i get "succeeded with info" in the "Run Status" column. When I want to click then on the "View Report" link, I get the following error: "Could not generate the report. Either data is not available for the specified duration or the report job failed."
 
I tried the same procedure with 2 other switches but I have got the same result.

View 1 Replies View Related

Cisco :: CiscoWorks Appliance In T2000

Jul 25, 2011

A while back we were looking into upgrading our SUN/Oracle server to better service our CiscoWorks. Our vendor (partnered Cisco Vendor) told us that Cisco was developing an appliance like WCS and CNR that runs Redhat for CiscoWorks.Does any one have any info on this or could this be a rumor?

We do not run Windows devices on any of our network enterprise and this would be so cool!
 
Oracle is getting to be a clone of Windows..in our opinion
 
If this is true, I will happy to sit and wait for it.
 
We now run LMS 4.0 on a SUN/Oracle T2000 and it seems to be bottlenecking.

View 2 Replies View Related

Cisco :: How To Get Ciscoworks LMS 4.0.1 Serial Number

Dec 11, 2011

How to get Ciscoworks LMS 4.0.1 serial number ? I need that to put the product under mainrtenance, and I can't manage to get it.

View 2 Replies View Related

Cisco :: LMS 4.0 Fault Management Module Alert Doesn't Show Current-Utilization Percentage

Feb 22, 2012

I would like to know if there's a way to show Current-Utilization percentage within the messages generated by the Fault Management Module in LMS 4.0 [code] As you can see above CurrentUtilization percentage is not shown in Event Description section.

View 2 Replies View Related

Cisco :: Configuring Rcp On Ciscoworks LMS 2.5 And 3560 Switch

Jul 13, 2011

I am having LMS 2.5 and nearly 50 cisco 3560 in my network. And I want to configure rcp. How can I do it.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved