Cannot Use The Internet Connected But Fault Displayed?
Mar 18, 2012
i have trying for a few days to connect my HP G7000 notebook to the internet through my wireless but i have tried everything i can think without getting anywhere. I only got it a few days back for my daughter to do her homework ect, but can't get it to connect i see a post on here about updating drivers but i can't get it to connect to do this, then thought about downloading the driver update it may need to my laptop but i really dont want to download anything onto my laptop as its a different model with different drivers and dont want it to stop my laptop working.i get on the HP G7000 is cannot communicate with primary DNS server 194.168.4.100 then underneath that message it is saying Network diagnostics pinged the remote host but did not receive a response
View 3 Replies
ADVERTISEMENT
Mar 16, 2011
I have a neighbor whose wireless network is not secured (open). When I try connecting to it, it appears connected like a normal wireless network -except without the bell sound that I get form my wireless card software when the connection is successful-. However, web pages cannot be displayed nor can I update any software, and it is as if there is no internet connection at all. Actually, I have used my neighbor's wireless internet for a long time before the occurrence of this problem, and I can connect to any other open wireless network without any problems. Do you think that my neighbor has changed something in the settings of his wireless network to prevent me from accessing it? What should I do in order to solve this problem from my laptop?
View 1 Replies
View Related
Feb 20, 2011
My wireless is connected, but I get page cannot be displayed when I go to the internet. I have all the correct wireless settings, IP address, etc. I have tried to connect by ethernet and then internet works fine. I have done a million different troubleshooting steps. I have other computers using the same router and they all work fine. The laptop that is not connecting is an Inspiron 1501 and it is windows Vista. My internet suport it must be in my Laptop.
View 7 Replies
View Related
Jan 28, 2013
I have another a Dell that says internet page cant be displayed.
View 1 Replies
View Related
Jan 10, 2011
cannot access internet comes up page cannot be displayed.i have her computer at my house and it will show my connection but ....will not allow internet connection.
View 14 Replies
View Related
Aug 23, 2011
i'm having an issue with a computer on my home network (Windows XP Professional SP3, latest updates) where i can't access the Internet or even the router on my home network (which it is part of).if i look at the network connection (wired) under control panel it shows as connected, and it's set with a static IP address (always has been), so nothing looks out of the ordinary there, yet if i try opening Internet Explorer i just get the "page cannot be displayed" page, and i can't even ping my own router- request times out.I've tried connecting a wireless adapter that i use on my laptop every day.. it connects to the wireless network no problem, but still the same results with IE and pinging the router.
View 4 Replies
View Related
Jan 29, 2011
My computer connects to the internet but when i try to get it on it pops up webpage cant be displayed.Then when i diagnose the problem it says somethings wrong with my proxy server ive followed the instructions.
View 2 Replies
View Related
Mar 8, 2011
I have a notebook with Windows XP SP2 installed onto it. I am trying to access the web either using Google Chrome or Internet Explorer but no lack.I have tried almost everything such as:
1. Delete Cookies / Browsing History.
2. Reset Internet Explorer Settings.
3. Checked LAN settings.
4. Checked Proxy Settings.
5. Checked for Virus.
When I select to logon to the computer with Safe Mode then Internet works. In normal mode not... When I ping any website I get reply with 100% success.
View 1 Replies
View Related
Feb 2, 2013
I have a Sony Viao laptop with WinXp SP3 which is now 6 years old. We are currently renting a holiday home in the USA which has an unsecured network. We have two other laptops and they are connected, no problem. This morning my Sony worked fine on email and web access but I was having trouble on FTP. Then email stopped and then web.I have tried all the usual solutions. Delete the Network, restart etc etc.It clearly show the network (and also another secured network I cannot access). When I connect it shows "Acquiring network address" then just hangs. If I press, repair it hangs on "Renewing your IP address" Does the fact that it can see the networks and when I "ping 127.0.01" it seems to be OK, mean that it CANNOT be a hardware fault? I ask this partly because the WLAN switch at the front often does not seem to work (when it does work it is green and currently it IS green)
View 9 Replies
View Related
Feb 15, 2012
when i right click nic (the double computer icon) properties in my windows server 2003 nothing is displayed. It shows as if it is going to log off but returns as usual without showing any properties.
View 2 Replies
View Related
Mar 16, 2012
there are always some Traps more or less processed by LMS showing up in Fault Monitor View.Especially some Pass-Through or Unidentified Traps can be annoying if you want to keep the view clean.I wonder how to disable such Traps to not beeing displayd on the DFM Fault Monitor View?
View 1 Replies
View Related
Jul 11, 2011
Despite there are all devices are managed in DFM (accorduing to Collection Summary Portlet or Rediscover devices) there are no devices in the Fault Monitor with the message "No devices are available"Does it mean, we have absolutly no faults in our network or does it mean that we have a problem with DFM?
View 2 Replies
View Related
Mar 18, 2013
How to find out which Fault Threshold group a specific interface belongs to.The scenario is that in Fault Manager there is an alarm for which I want to change the Threshold Setting.
Example Alarm:
Event_Description HighUtilization
Device IP x.x.x.x
Device Type Routers
Fault Last Updated At 19-Mar-2013 09:44:25
Component IF-router2.x.x/26 [Tu187] [x.x.x.x]
[Code] .....
View 1 Replies
View Related
May 2, 2012
I try run Fault monitor feature in LMS 4.0, but I got error like this picture :
View 3 Replies
View Related
Oct 23, 2011
I upgraded the LMS 4.0 with LMS 4.0.1 but now the events are removed of Fault View. The equipments than I am monitoring are: ME-3600, ME-3800 and ASR 9000. This is a configuration problem or I have to update something else?
View 1 Replies
View Related
Dec 5, 2012
After an update to ASA 9.0, the Graphtrees are empty within Cacti (0.8.7g)? When I connect directly I can see all trees.
View 1 Replies
View Related
Feb 26, 2012
I'm having some issues with Web-Passthrough, I'm using two 4404-50 controllers. Clients get IP addresses well. I'm using the controllers internal DHCP Servers. Controllers can reach DNS public IP Addresses (from management and guest vlan), the issue is that only very few clients are able to get displayed the Web-Passthrough page, the rest of the clients never get the page.
Version 7.0.98.0
The controllers also work as anchor controllers for two more foreign controllers.
View 10 Replies
View Related
Dec 13, 2012
This is Cisco Prime LMS 4.2.2 on Windows 2008 R2
As far as I understand it Fault Manager need to be able to do reverse lookup for ip adresses to show the correct name in the "device name" column. I have double and tripple checked and all devices that only is shown as an ip address do have a reverse in the dns used by the LMS server. The device is correctly registered and inventory have been run. If I hold the mouse pointer over the crosshair on the row of the offending device all info is shown including correct device name and fqdn.
The server is upgraded from 4.2.1 to 4.2.2 and we have the same problem before the upgrade.
View 2 Replies
View Related
Nov 6, 2012
I have an ISR 1921. Every now and then, it crashes saying "Possible software fault". The system LED flashes amber and only a hard reset (power on/off) will reload the ISR.
View 2 Replies
View Related
Sep 11, 2012
I am trying to setup Fault Monitoring on LMS 4.0. When I try to create a Fault Notification Group no devices are listed. They appear to be listed in all other places so I am at a loss as to explain why they are not appearing.
View 7 Replies
View Related
Nov 6, 2012
i´m looking for two hours now and can not find a way to suspend a device in the Fault Monitor. We´re using LMS 4.2.2
View 1 Replies
View Related
Oct 13, 2011
I have an inventory added to Ciscoworks and am getting alerts on interfaces that I want to exclude but for the life of me I can't figure out how to exclude interfaces. Any tips on how to exclude interfaces from the fault engine in 4.1.
View 3 Replies
View Related
Jan 9, 2013
When you type a command in the terminal, if the command is too long is only displays the last half of it. How do I change it show it give me enough room to view the entrie command?
View 3 Replies
View Related
Mar 3, 2011
The problem i am experiencing is that on my home network i have been using for several years now one computer on my network suddenly cannot get online..however it can connect. They determined that all is working well and all settings are as they should be. I then contacted my ISP, Cox communications and was essentially told the same thing. This is after going through several tests with each, such as ping tests, turning the gateway off/on, reviewing settings such as TCP/IP, DNS, etc, etc. The findings were that i have IP addresses and everything else that should be there. Ive turned off the firewall, disabled antivirus, reset tcp/ip stack and winsock. I have been working on this for two days and after paying for it still do not have it fixed. The computer acts as it normally does, no other problems except that when i press the IE icon to open a browser window it tries to go to my homepage, google, but then reverts to the "page cannot be displayed screen". This computer is running XP SP2 and is a wired connection(although it was wireless when i first experienced the problem because i have a network adapter installed as well..but i disabled it and enabled my LAC and used the ethernet cable because this is one of the exercises cisco ahd me perform to see if i could connect wired/wirelessly.. better bandwidth anyway at 100mbps compared to the 56mbps with the wireless-g adapter). The othe computer is a laptop running windows 7.
View 16 Replies
View Related
Nov 15, 2011
Basically we have 5 users in one of our offices and the internet works completely fine.However we cannot access the company Intranet. We receive 'The page cannot be displayed'.I have no idea why because all other sites work okay!Note: The Intranet can be accesed from home and libraries as I have checked aswel as 2 offices we have, everything works fine.It's just the one office and everything else works fine.
View 2 Replies
View Related
Feb 24, 2013
I have a problem with my Linksys X3000 and Samsung TV. When I use X3000 as Media Server and connect TV from Lan, I see the list of MKV files, but when a want played TV displayed that file not supported!I knew, that TV support this format from USB, and installed the Twonky MediaServer 6.0.34 (as on Linksys X3000) on Virtually Machine under Windows XP and try, but again displayed file not supported.Then I change (Virtual_Machine_IP:9000/config) in Media Receivers "Generic Media Receiver" on "Samsung TV" and My can play mkv files without problem.Why I can not entered to Twonky Media Server config page (I see a "Service not available") and why I can not change "Media Receivers" on the X3000?
View 9 Replies
View Related
Jul 1, 2012
i have cisco catalyst 4506 switch and i run no logging by mistake and i am trying to enable logging again but not displayed at all
View 7 Replies
View Related
Aug 23, 2011
When i web browse to the ASA i get the certificate warning page, when i click to continue to the website it loads the normal "this page cannot be displayed"..
I use to have the ASDM software on my computer to manage the device however its been uninstalled now.. can this be downloaded somewhere? i have already tried upgrading the asdm and asa files on the asa?
View 6 Replies
View Related
Apr 30, 2013
I have a Cisco ASA 5505 V10. I've upgraded it to use asa825-K8 & asdm-649.103. Before the upgrade I was able to get to the ASDM via https://192.168.1.1. However after the upgrade I just get a page cannot be displayed. I have rebooted the ASA.
View 4 Replies
View Related
Jul 23, 2011
I am running my laptop on Windows 7 Proffesional 32 bit and it won't let me search for a wireless connection on the Control Panel I think it might be a problem with the wireless switch at the bottom as it doesn't show the wireless sign on the laptop. I have also tried running the laptop on Ultimate 64 bit but the problem continued to persist.
View 12 Replies
View Related
Mar 31, 2012
I have a 1Gb network set up whereby I have a Netgear 26 Port 1000Mbps unmanaged network switch at the heart of my home network. What I have the problem with is devices connected on any one of my 3 300Mbps access points drop out showing no internet but they really mean no network access unless i disconnect and reconnect or switch to another access point. Other things I get happening is one min i have a transfer speed wired connection to wired connection of 35Mb per second and then I only have 8 or less. I am wondering if I have cable issues but before I went out and spent about �100 on new belkin cat6 cable I would ask if there is software I can use to test all the devices on the network so I can replace the faulty item.
View 3 Replies
View Related
Feb 13, 2013
Region : UnitedArabEmirates
Model : TD-W8961ND
Hardware Version : V1
Firmware Version :
ISP :
I have two W8961ND, one for may office and the another one for use at my home, I tried to upgrade my device but during the upgrading the power supply plugged out and after that my device didn't boot up any more, so how can I repair my device, Is there any uploader for it's hardware chip because it doesn't work with it's LAN port or WIFI at this moment
View 1 Replies
View Related
Jul 28, 2012
We are running LMS 4.1 and we have more than 150 devices.LMS could not find the fault discovery for 3 switches with partnumber WS-C3560C-12PC-S. This switches are considered as unknown.Ios version is c3560c405-universalk9-mz.122-55.EX3.bin But other things are ok. Inventory Collection ,Config Archive, Topology Data Collection etc . Is there any way to fix ths issue? We have compact switch WS-C3560CG-8PC-S, which is working perfectly for all features.
View 4 Replies
View Related
