Cisco :: C3560C Could Not Find The Fault Discovery For 3 Switches
Jul 28, 2012
We are running LMS 4.1 and we have more than 150 devices.LMS could not find the fault discovery for 3 switches with partnumber WS-C3560C-12PC-S. This switches are considered as unknown.Ios version is c3560c405-universalk9-mz.122-55.EX3.bin But other things are ok. Inventory Collection ,Config Archive, Topology Data Collection etc . Is there any way to fix ths issue? We have compact switch WS-C3560CG-8PC-S, which is working perfectly for all features.
View 4 Replies
ADVERTISEMENT
Jul 11, 2011
Despite there are all devices are managed in DFM (accorduing to Collection Summary Portlet or Rediscover devices) there are no devices in the Fault Monitor with the message "No devices are available"Does it mean, we have absolutly no faults in our network or does it mean that we have a problem with DFM?
View 2 Replies
View Related
Mar 18, 2013
How to find out which Fault Threshold group a specific interface belongs to.The scenario is that in Fault Manager there is an alarm for which I want to change the Threshold Setting.
Example Alarm:
Event_Description HighUtilization
Device IP x.x.x.x
Device Type Routers
Fault Last Updated At 19-Mar-2013 09:44:25
Component IF-router2.x.x/26 [Tu187] [x.x.x.x]
[Code] .....
View 1 Replies
View Related
May 2, 2012
I try run Fault monitor feature in LMS 4.0, but I got error like this picture :
View 3 Replies
View Related
Oct 23, 2011
I upgraded the LMS 4.0 with LMS 4.0.1 but now the events are removed of Fault View. The equipments than I am monitoring are: ME-3600, ME-3800 and ASR 9000. This is a configuration problem or I have to update something else?
View 1 Replies
View Related
Feb 2, 2013
I have a Sony Viao laptop with WinXp SP3 which is now 6 years old. We are currently renting a holiday home in the USA which has an unsecured network. We have two other laptops and they are connected, no problem. This morning my Sony worked fine on email and web access but I was having trouble on FTP. Then email stopped and then web.I have tried all the usual solutions. Delete the Network, restart etc etc.It clearly show the network (and also another secured network I cannot access). When I connect it shows "Acquiring network address" then just hangs. If I press, repair it hangs on "Renewing your IP address" Does the fact that it can see the networks and when I "ping 127.0.01" it seems to be OK, mean that it CANNOT be a hardware fault? I ask this partly because the WLAN switch at the front often does not seem to work (when it does work it is green and currently it IS green)
View 9 Replies
View Related
Jan 22, 2012
I finished the CCNA and CCNP classes last year but due to wife/school/excuse I did'nt have time to buckle down and study for the tests. So since time is flying buy and I got my new desk set up I figured I would set my lab up and get cracking.
On top I have a a Pix 506 and a 1900 switch. I need to find at least two more switches, hopefully 3550's or something close.Then I have 5 2600's with an assortment of cards, but I would like to replace most of them to either WIC 2T or HWIC 2FE's.
Not shown on the bottom are 2 2500's that will be configured as Frame Relay switches. I have a 3600 sitting on my bench in the shop and I was hoping to get something I could configure as a terminal server as well. I have GNS3 on my lab box and was planning on getting another network card and tying it into the hardware lab.
View 6 Replies
View Related
Dec 13, 2012
This is Cisco Prime LMS 4.2.2 on Windows 2008 R2
As far as I understand it Fault Manager need to be able to do reverse lookup for ip adresses to show the correct name in the "device name" column. I have double and tripple checked and all devices that only is shown as an ip address do have a reverse in the dns used by the LMS server. The device is correctly registered and inventory have been run. If I hold the mouse pointer over the crosshair on the row of the offending device all info is shown including correct device name and fqdn.
The server is upgraded from 4.2.1 to 4.2.2 and we have the same problem before the upgrade.
View 2 Replies
View Related
Nov 6, 2012
I have an ISR 1921. Every now and then, it crashes saying "Possible software fault". The system LED flashes amber and only a hard reset (power on/off) will reload the ISR.
View 2 Replies
View Related
Sep 11, 2012
I am trying to setup Fault Monitoring on LMS 4.0. When I try to create a Fault Notification Group no devices are listed. They appear to be listed in all other places so I am at a loss as to explain why they are not appearing.
View 7 Replies
View Related
Nov 6, 2012
i´m looking for two hours now and can not find a way to suspend a device in the Fault Monitor. We´re using LMS 4.2.2
View 1 Replies
View Related
Oct 13, 2011
I have an inventory added to Ciscoworks and am getting alerts on interfaces that I want to exclude but for the life of me I can't figure out how to exclude interfaces. Any tips on how to exclude interfaces from the fault engine in 4.1.
View 3 Replies
View Related
Jan 28, 2013
I did not know to update the boot software of my SRW2024 first, then update to 1.2.2b.I need to go back to the 1.0.0.86 firmware.
Is it downloadable and will it work (ie work backwards and then do it properly)? I know how to use hyperterminal and the xmodem protocol if need be.
View 9 Replies
View Related
Mar 18, 2012
i have trying for a few days to connect my HP G7000 notebook to the internet through my wireless but i have tried everything i can think without getting anywhere. I only got it a few days back for my daughter to do her homework ect, but can't get it to connect i see a post on here about updating drivers but i can't get it to connect to do this, then thought about downloading the driver update it may need to my laptop but i really dont want to download anything onto my laptop as its a different model with different drivers and dont want it to stop my laptop working.i get on the HP G7000 is cannot communicate with primary DNS server 194.168.4.100 then underneath that message it is saying Network diagnostics pinged the remote host but did not receive a response
View 3 Replies
View Related
May 24, 2011
how do you find a WPA-PSK for wifi from a laptop? (I forgot mine and cant get into my psp).
View 4 Replies
View Related
Aug 8, 2012
LMS discoverd all my devices and updated the DCR. This devices are visible in DFM. For some of this devices i would like to change the threshold values. For some reason the devices are not visible in Monitor->Fault Settings->Seup->Threshold Settings (please see screenshot) Is there another approach to change the threshold values?
View 5 Replies
View Related
Aug 26, 2012
I've just installed LMS 4.2, like it a lot so far. In the Fault Monitor, the Device Name column shows the device's IP address rather than the host name. We need for it to show the host name, for ease of troubleshooting; most folks don't have the IP addresses memorized. Likewise, when an email is sent out for an event, the managed device field also shows up as the device's IP address.
The devices were all discovered with their IP addresses rather than a host name...should LMS have automatically found their host names? Regardless, I manually updated all of the device's host names, yet they still display as an IP address in the fault monitor.
Also, it appears I need to figure out some way to throttle alerts. One particular device will report an event (ie a temperature out of range) dozens of times in a polling period...several per second, even though it's the same alert.
View 2 Replies
View Related
Jul 3, 2012
I am working with LMS 4.1 and FDM 4.1.0.
If I ask to the Supported Device Finder Portlet about C4503-E (SysObjectId: 1.3.6.1.4.1.9.1.874), it tells that this device is supported by DFM 4.1.0. Nevertheless, in DFM module each one devices appear in the "All Unknown Devices" group, with Error Code: Unsupported. CDP is enable in each one of these devices.
View 3 Replies
View Related
Sep 22, 2011
Where can I find information on using debug on the SGE2010P switches? The information in the admin and reference guides is extermely limited.
View 1 Replies
View Related
May 27, 2013
I had a SG200-8/SLM2008TNA switch that I was using on my lab network (192.168.9.x)One of my clients had an emergency so I moved the switch to their network (10.1.2.x)I can't see the switch at all! Cisco FindIt toolbar won't discover it (other switches on the client network are discovering OK)I changed my computer's IP to the range where the switch used to live...still can't find it I also don't see any new devices in DHCP with cisco-looking MAC addresses.Of course, the SG200-8 doesn't have its MAC address printed anywhere on it, and doesn't have a factory reset button.It's passing traffic OK but I was hoping to get it configured via web console and set for SNMP monitoring. how to discover/reset IP/factory reset this thing?
View 2 Replies
View Related
May 23, 2011
how do i find my routers ip?
View 2 Replies
View Related
Feb 26, 2011
I can't find my netgear password
View 1 Replies
View Related
Sep 13, 2012
how do i find the wps on my linksys router
View 4 Replies
View Related
Jan 12, 2011
i have 3 home computers using the same wireless router. 2 of them have no problems detecting and accessing internet. one computer can access at times, but many times cannot detect network. i have tried restarting my modem, the router, my computer etc. at times, it works, at times it doesn't. at times, it is ok, at other times it is not.
View 2 Replies
View Related
Mar 19, 2011
I have wrongly entered a ip address while port forwarding... and my router seems to not be responding.Meaning whenever I put the Default gateway numbers ,my router does not open.
View 1 Replies
View Related
Mar 21, 2011
I have Qwest router on 192.168.0.1 but my linksys router is hardwired to that router to provide a stronger signal throughout the house. I can't get to the 192.168.1.1 page through the internet. I need to configue the linksys router. Specifically to forward some ports to/for the XBox360 or at least make sure Upnp is enabled.
View 1 Replies
View Related
Jan 14, 2013
Cisco Prime 4.2. My device is stuck in Questioned state in Fault Management. The device though can be pinged from the server. Actually, I can already manage the device and have archived its configuration. Problem is, on Fault Monitoring Device Administration, its on Questioned state even though I already tried to rediscover the device several times.Do I need to configure something on the server like put in the IP address and hostname of the device in the host file of Windows Server 2008?
View 1 Replies
View Related
Aug 17, 2011
I'm trying to configure Fault Tolerance on a pair of 4710s. I followed the doc, and configured int gi1/4 as the fault tolerance interface, using vlan 12. However the GUI is saying FT Vlan Down
The troubleshooting wiki said check the physical connectivity, but everything there looks good. Each ACE can ping it's own IP, but not the router on that VLAN, or the peer. They're connected to a dedicated VLAN in a switch, and I even tried a crossover cable to directly connect the two. [code]
View 8 Replies
View Related
Nov 20, 2012
I have recently purchased an SG-300-52 Managed Switch. (This is the first managed switch I have used, so I am trying to figure out what I can do with it and how it works.)
I would like to know how to find out the IP address of each computer connected to each port of the switch. Is this possible and if so how can I do this from the browser interface?
View 9 Replies
View Related
Jul 23, 2011
I am running my laptop on Windows 7 Proffesional 32 bit and it won't let me search for a wireless connection on the Control Panel I think it might be a problem with the wireless switch at the bottom as it doesn't show the wireless sign on the laptop. I have also tried running the laptop on Ultimate 64 bit but the problem continued to persist.
View 12 Replies
View Related
Mar 31, 2012
I have a 1Gb network set up whereby I have a Netgear 26 Port 1000Mbps unmanaged network switch at the heart of my home network. What I have the problem with is devices connected on any one of my 3 300Mbps access points drop out showing no internet but they really mean no network access unless i disconnect and reconnect or switch to another access point. Other things I get happening is one min i have a transfer speed wired connection to wired connection of 35Mb per second and then I only have 8 or less. I am wondering if I have cable issues but before I went out and spent about �100 on new belkin cat6 cable I would ask if there is software I can use to test all the devices on the network so I can replace the faulty item.
View 3 Replies
View Related
Feb 13, 2013
Region : UnitedArabEmirates
Model : TD-W8961ND
Hardware Version : V1
Firmware Version :
ISP :
I have two W8961ND, one for may office and the another one for use at my home, I tried to upgrade my device but during the upgrading the power supply plugged out and after that my device didn't boot up any more, so how can I repair my device, Is there any uploader for it's hardware chip because it doesn't work with it's LAN port or WIFI at this moment
View 1 Replies
View Related
Feb 19, 2012
have a Dell Inspiron 1525 and when I revived it from years of neglect I have come across a problem that I cannot connect to a wifi connection.I know that in order for the wifi to be found the wireless in my laptop has to be turned on, however the light on the side does not switch on.So far I have installed drivers and even bought a new wireless WLAN card...And still it does not work.The laptop runs fine with wired connection but I want to use wireless?
View 3 Replies
View Related
