Cisco :: 4.2 Device Is Stuck In Questioned State In Fault Management
Jan 14, 2013
Cisco Prime 4.2. My device is stuck in Questioned state in Fault Management. The device though can be pinged from the server. Actually, I can already manage the device and have archived its configuration. Problem is, on Fault Monitoring Device Administration, its on Questioned state even though I already tried to rediscover the device several times.Do I need to configure something on the server like put in the IP address and hostname of the device in the host file of Windows Server 2008?
View 1 Replies
ADVERTISEMENT
Oct 10, 2011
I have this one device that is stuck in DFM Questioned state. The device is correctly discovered in CS and I have collected its configuration through ConfigMgmt (RME).I run Device Troubleshooting against it:
View 1 Replies
View Related
Apr 15, 2012
Why this same kind of bug/error/software fault exist in LMS 4.2 as it was in LMS 3.2 ? Why after a while after discovery of devices (state is "Known") DFM drops the state of devices to "Learning" and it stucks forever. Restarting of daemon manager works for a short time. It looks like the processing of faults stops a while after discovery is complete.
LMS 4.2 is running on Solaris 10, connected to other LMS in DCR Slave configuration.
View 1 Replies
View Related
Jan 1, 2013
I am working on LMS 3.2 . Tried to stop the daemon service with " net stop crmdmgtd ". It stuck on stopping state since few hours now. I can still open the application. How to terminate the previous command and restart the daemon service.
View 1 Replies
View Related
Jul 12, 2012
We did an upgrade from NX-OS 5.1.5 to 5.2.4 and found all M1 line card interfaces were stuck in initializing state for long time.'show module' status says ok. And we cannot execute shut/no shut command under the interface. N7K-M108X2-12L & N7K-M148GT-11 are the two M series cards. Only option was to downgrade back for the time being.
N7K01# sh int e1/1 | in down
Ethernet1/1 is down (initializing)
View 3 Replies
View Related
Aug 31, 2011
User is connecting to 5508, running 7.0.116.0. Previously worked on another AP. TV (client) is set to use dhcp. As other posts have mentioned, "DHCP Addr. Assignment" checkbox is not checked for this wlan, but I also switched it to Required for this wlan but it did not make any difference. Seems to be a problem with just this client as many other clients are on this AP with no problems.
Users have to register their MAC to get on our wireless system, but there is no encyption or security enabled once the device has been registered.
View 34 Replies
View Related
May 2, 2012
I am working as a Network Administrator. Here I have to manage Cisco Switches 2960 and 4500 Series, Active Directory, Database Server, Exchange Server, File Servers, IP Telophony, Fortigate Firewall, 2960 Router, Wifi availability within Company. Although, in case of any disaster we will contact to vendor for solution, but the management told me to deploy any Software/Network Monitor which will facilitate to manage all this, i.e, overall network Health check, Performance Measurement, Fault Tolerance.
View 2 Replies
View Related
Feb 22, 2012
I would like to know if there's a way to show Current-Utilization percentage within the messages generated by the Fault Management Module in LMS 4.0 [code] As you can see above CurrentUtilization percentage is not shown in Event Description section.
View 2 Replies
View Related
Nov 6, 2012
i´m looking for two hours now and can not find a way to suspend a device in the Fault Monitor. We´re using LMS 4.2.2
View 1 Replies
View Related
Aug 26, 2012
I've just installed LMS 4.2, like it a lot so far. In the Fault Monitor, the Device Name column shows the device's IP address rather than the host name. We need for it to show the host name, for ease of troubleshooting; most folks don't have the IP addresses memorized. Likewise, when an email is sent out for an event, the managed device field also shows up as the device's IP address.
The devices were all discovered with their IP addresses rather than a host name...should LMS have automatically found their host names? Regardless, I manually updated all of the device's host names, yet they still display as an IP address in the fault monitor.
Also, it appears I need to figure out some way to throttle alerts. One particular device will report an event (ie a temperature out of range) dozens of times in a polling period...several per second, even though it's the same alert.
View 2 Replies
View Related
Jul 3, 2012
I am working with LMS 4.1 and FDM 4.1.0.
If I ask to the Supported Device Finder Portlet about C4503-E (SysObjectId: 1.3.6.1.4.1.9.1.874), it tells that this device is supported by DFM 4.1.0. Nevertheless, in DFM module each one devices appear in the "All Unknown Devices" group, with Error Code: Unsupported. CDP is enable in each one of these devices.
View 3 Replies
View Related
Dec 14, 2011
I have installed successfully installed and configured LMS 4.0 and every thing was okay until the customer decided to change the server IP address without notifying any one.
so i have returned the server to its original ip address since nothing worked after they changed the IP, but even after restoring the old IP address the device descovery is okay, but when i navigate to the devices management nothing appears in the all devices drop down menu and the remaining menues also.
i have tried to restart and to start a new device discovery also i have tried to run a data collection but nothing changed.
still stck on the devices are not appearing in the device management tab.
View 1 Replies
View Related
Aug 22, 2011
Not able to see devices in CS device management (0 devices).but devices are visible in other modules like RME and DFM.
View 3 Replies
View Related
May 16, 2013
I have been sitting on the fence waiting and just using the crappy Apple find my phone, and activesync with exchange server 2010. Other than disable activesync for users without company provided phones because we do not want to get into the whole wiping someone's personal phone if they should misplace it/leave the company.I just read today that Spiceworks 7 (7 beta 1 will be in late May) will have MDM because of using MaaS360. There will be some free basic stuff or for a premium you can add on to it.
View 9 Replies
View Related
Jun 20, 2011
I use the Edit Identity option to change the "Display Name" from an IP to a station name, it is overwritten when a discovery has been done. I have checked the discovery settings and tried using the update DCR Display name setting to prevent this from happening, but it makes no difference.Is there something i am missing? This is on LMS 3.2?
View 2 Replies
View Related
Jul 19, 2012
We are conduction a Proof Of Concept (PoC) on Secure Bring Your Own Device ( BYOD ) using Cisco ISE and gonna test all the scenarios like Wired, Wireless and VPN user access.
Our Setup has ISE VM acting as Admin, Monitor and Profiling Device, we have NAC 3315 physical Appliance as Inline posture Device, Wireless LAN controller, Access point and the Identity source as Microsof Active Directory.Having Plans to Integrate Mobile Device Management ( MDM ) and Citrix VDI setup also.
As of now we have tested the Wired Scenario Authentication and authorization for guest users and gonna carry out the profiling and posture.
-MDM can be integrated to ISE ?
-How the MDM can be integrated to Cisco ISE configuration or Guide to show the same?
-What is the demarcation between MDM and ISE ( i.e. What is the role of ISE and MDM on Mobile Devices ) ?
-If MDM is available so then when the control of ISE ends, does MDM do management or ISE will do management of the devices ?
-Is MDM will do client provisioning or ISE should do ?
-Is MDM send or update patches of Mobile Devices ?
View 5 Replies
View Related
Jul 11, 2011
Despite there are all devices are managed in DFM (accorduing to Collection Summary Portlet or Rediscover devices) there are no devices in the Fault Monitor with the message "No devices are available"Does it mean, we have absolutly no faults in our network or does it mean that we have a problem with DFM?
View 2 Replies
View Related
Mar 18, 2013
How to find out which Fault Threshold group a specific interface belongs to.The scenario is that in Fault Manager there is an alarm for which I want to change the Threshold Setting.
Example Alarm:
Event_Description HighUtilization
Device IP x.x.x.x
Device Type Routers
Fault Last Updated At 19-Mar-2013 09:44:25
Component IF-router2.x.x/26 [Tu187] [x.x.x.x]
[Code] .....
View 1 Replies
View Related
May 2, 2012
I try run Fault monitor feature in LMS 4.0, but I got error like this picture :
View 3 Replies
View Related
Oct 23, 2011
I upgraded the LMS 4.0 with LMS 4.0.1 but now the events are removed of Fault View. The equipments than I am monitoring are: ME-3600, ME-3800 and ASR 9000. This is a configuration problem or I have to update something else?
View 1 Replies
View Related
Feb 2, 2013
I have a Sony Viao laptop with WinXp SP3 which is now 6 years old. We are currently renting a holiday home in the USA which has an unsecured network. We have two other laptops and they are connected, no problem. This morning my Sony worked fine on email and web access but I was having trouble on FTP. Then email stopped and then web.I have tried all the usual solutions. Delete the Network, restart etc etc.It clearly show the network (and also another secured network I cannot access). When I connect it shows "Acquiring network address" then just hangs. If I press, repair it hangs on "Renewing your IP address" Does the fact that it can see the networks and when I "ping 127.0.01" it seems to be OK, mean that it CANNOT be a hardware fault? I ask this partly because the WLAN switch at the front often does not seem to work (when it does work it is green and currently it IS green)
View 9 Replies
View Related
Dec 13, 2012
This is Cisco Prime LMS 4.2.2 on Windows 2008 R2
As far as I understand it Fault Manager need to be able to do reverse lookup for ip adresses to show the correct name in the "device name" column. I have double and tripple checked and all devices that only is shown as an ip address do have a reverse in the dns used by the LMS server. The device is correctly registered and inventory have been run. If I hold the mouse pointer over the crosshair on the row of the offending device all info is shown including correct device name and fqdn.
The server is upgraded from 4.2.1 to 4.2.2 and we have the same problem before the upgrade.
View 2 Replies
View Related
Nov 6, 2012
I have an ISR 1921. Every now and then, it crashes saying "Possible software fault". The system LED flashes amber and only a hard reset (power on/off) will reload the ISR.
View 2 Replies
View Related
Sep 11, 2012
I am trying to setup Fault Monitoring on LMS 4.0. When I try to create a Fault Notification Group no devices are listed. They appear to be listed in all other places so I am at a loss as to explain why they are not appearing.
View 7 Replies
View Related
Oct 13, 2011
I have an inventory added to Ciscoworks and am getting alerts on interfaces that I want to exclude but for the life of me I can't figure out how to exclude interfaces. Any tips on how to exclude interfaces from the fault engine in 4.1.
View 3 Replies
View Related
Mar 18, 2012
i have trying for a few days to connect my HP G7000 notebook to the internet through my wireless but i have tried everything i can think without getting anywhere. I only got it a few days back for my daughter to do her homework ect, but can't get it to connect i see a post on here about updating drivers but i can't get it to connect to do this, then thought about downloading the driver update it may need to my laptop but i really dont want to download anything onto my laptop as its a different model with different drivers and dont want it to stop my laptop working.i get on the HP G7000 is cannot communicate with primary DNS server 194.168.4.100 then underneath that message it is saying Network diagnostics pinged the remote host but did not receive a response
View 3 Replies
View Related
Jul 28, 2012
We are running LMS 4.1 and we have more than 150 devices.LMS could not find the fault discovery for 3 switches with partnumber WS-C3560C-12PC-S. This switches are considered as unknown.Ios version is c3560c405-universalk9-mz.122-55.EX3.bin But other things are ok. Inventory Collection ,Config Archive, Topology Data Collection etc . Is there any way to fix ths issue? We have compact switch WS-C3560CG-8PC-S, which is working perfectly for all features.
View 4 Replies
View Related
Aug 8, 2012
LMS discoverd all my devices and updated the DCR. This devices are visible in DFM. For some of this devices i would like to change the threshold values. For some reason the devices are not visible in Monitor->Fault Settings->Seup->Threshold Settings (please see screenshot) Is there another approach to change the threshold values?
View 5 Replies
View Related
Aug 17, 2011
I'm trying to configure Fault Tolerance on a pair of 4710s. I followed the doc, and configured int gi1/4 as the fault tolerance interface, using vlan 12. However the GUI is saying FT Vlan Down
The troubleshooting wiki said check the physical connectivity, but everything there looks good. Each ACE can ping it's own IP, but not the router on that VLAN, or the peer. They're connected to a dedicated VLAN in a switch, and I even tried a crossover cable to directly connect the two. [code]
View 8 Replies
View Related
Jul 23, 2011
I am running my laptop on Windows 7 Proffesional 32 bit and it won't let me search for a wireless connection on the Control Panel I think it might be a problem with the wireless switch at the bottom as it doesn't show the wireless sign on the laptop. I have also tried running the laptop on Ultimate 64 bit but the problem continued to persist.
View 12 Replies
View Related
Mar 31, 2012
I have a 1Gb network set up whereby I have a Netgear 26 Port 1000Mbps unmanaged network switch at the heart of my home network. What I have the problem with is devices connected on any one of my 3 300Mbps access points drop out showing no internet but they really mean no network access unless i disconnect and reconnect or switch to another access point. Other things I get happening is one min i have a transfer speed wired connection to wired connection of 35Mb per second and then I only have 8 or less. I am wondering if I have cable issues but before I went out and spent about �100 on new belkin cat6 cable I would ask if there is software I can use to test all the devices on the network so I can replace the faulty item.
View 3 Replies
View Related
Feb 13, 2013
Region : UnitedArabEmirates
Model : TD-W8961ND
Hardware Version : V1
Firmware Version :
ISP :
I have two W8961ND, one for may office and the another one for use at my home, I tried to upgrade my device but during the upgrading the power supply plugged out and after that my device didn't boot up any more, so how can I repair my device, Is there any uploader for it's hardware chip because it doesn't work with it's LAN port or WIFI at this moment
View 1 Replies
View Related
Feb 19, 2012
have a Dell Inspiron 1525 and when I revived it from years of neglect I have come across a problem that I cannot connect to a wifi connection.I know that in order for the wifi to be found the wireless in my laptop has to be turned on, however the light on the side does not switch on.So far I have installed drivers and even bought a new wireless WLAN card...And still it does not work.The laptop runs fine with wired connection but I want to use wireless?
View 3 Replies
View Related
