Cisco :: LMS 4.2.2 - Fault Manager Does Not Resolve Hostname
Dec 13, 2012
This is Cisco Prime LMS 4.2.2 on Windows 2008 R2
As far as I understand it Fault Manager need to be able to do reverse lookup for ip adresses to show the correct name in the "device name" column. I have double and tripple checked and all devices that only is shown as an ip address do have a reverse in the dns used by the LMS server. The device is correctly registered and inventory have been run. If I hold the mouse pointer over the crosshair on the row of the offending device all info is shown including correct device name and fqdn.
The server is upgraded from 4.2.1 to 4.2.2 and we have the same problem before the upgrade.
View 2 Replies
ADVERTISEMENT
Jul 21, 2011
I am having issue with my network as my router won't resolve most of the hostname of the network, I have 30 devices on my network, and only 4 names are displayed on the available local host. It makes it very difficult to identify the devices on the network.
View 3 Replies
View Related
Jul 1, 2012
I am working on adding a mapping to our external address for our mail server - let's call it mail.example.com
I would like to be able to access mail.example.com internally for our user's smartphones - if they access our company WiFi they are not able to get mail using the mail.example.com as the server name in their phone setups. However, once they leave the office and use any other WiFi it works fine. Also, I am unable to ping that address from any internal device. I believe also this is the reason Exchange accounts do not work on our site to site VPN connections.
I have a ASA 5520 and work primarily in the ASDM 6.4 to do configurations in the main office and have 5510 in our site to site connections.
View 6 Replies
View Related
Jul 3, 2012
I am working with LMS 4.1 and FDM 4.1.0.
If I ask to the Supported Device Finder Portlet about C4503-E (SysObjectId: 1.3.6.1.4.1.9.1.874), it tells that this device is supported by DFM 4.1.0. Nevertheless, in DFM module each one devices appear in the "All Unknown Devices" group, with Error Code: Unsupported. CDP is enable in each one of these devices.
View 3 Replies
View Related
May 12, 2012
Customer is running LMS 2.6.Scheduled backup was running perfect. But it is no more happening.When we checked we found that the "License Manager/ Deamon Manager is down" message pop ups.
We reset the casuser password, and then restarted the services. It becomes ok.But only the immediate backup is successful. Scheduled task fails for all those devices."License Manager/ Deamon Manager is down" happens quite often.
View 1 Replies
View Related
Jul 11, 2011
Despite there are all devices are managed in DFM (accorduing to Collection Summary Portlet or Rediscover devices) there are no devices in the Fault Monitor with the message "No devices are available"Does it mean, we have absolutly no faults in our network or does it mean that we have a problem with DFM?
View 2 Replies
View Related
Mar 18, 2013
How to find out which Fault Threshold group a specific interface belongs to.The scenario is that in Fault Manager there is an alarm for which I want to change the Threshold Setting.
Example Alarm:
Event_Description HighUtilization
Device IP x.x.x.x
Device Type Routers
Fault Last Updated At 19-Mar-2013 09:44:25
Component IF-router2.x.x/26 [Tu187] [x.x.x.x]
[Code] .....
View 1 Replies
View Related
May 2, 2012
I try run Fault monitor feature in LMS 4.0, but I got error like this picture :
View 3 Replies
View Related
Oct 23, 2011
I upgraded the LMS 4.0 with LMS 4.0.1 but now the events are removed of Fault View. The equipments than I am monitoring are: ME-3600, ME-3800 and ASR 9000. This is a configuration problem or I have to update something else?
View 1 Replies
View Related
Feb 2, 2013
I have a Sony Viao laptop with WinXp SP3 which is now 6 years old. We are currently renting a holiday home in the USA which has an unsecured network. We have two other laptops and they are connected, no problem. This morning my Sony worked fine on email and web access but I was having trouble on FTP. Then email stopped and then web.I have tried all the usual solutions. Delete the Network, restart etc etc.It clearly show the network (and also another secured network I cannot access). When I connect it shows "Acquiring network address" then just hangs. If I press, repair it hangs on "Renewing your IP address" Does the fact that it can see the networks and when I "ping 127.0.01" it seems to be OK, mean that it CANNOT be a hardware fault? I ask this partly because the WLAN switch at the front often does not seem to work (when it does work it is green and currently it IS green)
View 9 Replies
View Related
May 14, 2012
I have a 5505 that currently has inside/outside interfaces and everything is working just fine. I am trying to create a DMZ that will essentially be just for vendors/guests. the DMZ will have full access to the outside (Internet) but no access to the inside. I am using the FW for DHCP, and 8.8.8.8 and 4.2.2.2 for DNS. I currently have 1 laptop in the DMZ vlan, and it is getting a correct IP, and it is showing 8.8.8.8 and 4.2.2.2 in ipconfig. I can ping/tracert 8.8.8.8/ 4.2. 2.2/74.125.137.147(what url... resolved to on a laptop connected to the inside vlan), but I cannot ping nor browse to url.... [code]
View 1 Replies
View Related
Nov 6, 2012
I have an ISR 1921. Every now and then, it crashes saying "Possible software fault". The system LED flashes amber and only a hard reset (power on/off) will reload the ISR.
View 2 Replies
View Related
Sep 11, 2012
I am trying to setup Fault Monitoring on LMS 4.0. When I try to create a Fault Notification Group no devices are listed. They appear to be listed in all other places so I am at a loss as to explain why they are not appearing.
View 7 Replies
View Related
Jun 23, 2011
I am unfortately the only IT staff now for 100 - 150 users in my organization besides a consultant who doesn't have an answer for this issue even though he sold us the hardware and environment. While I realize that this version of the Cisco VPN doesn't support Windows 7, we do have some Windows 7 PC's that have the software and work perfectly fine upon install. In this case, I am at a remote location with both a Windows XP SP3 and Windows 7 SP1 computer. Both have the same Cisco client installed and connect to our ASA5520. I cannot get DNS resolution out of this computer to any remote network resources or other domains such as cnn.com including localhost. Adding the entries manually in the hosts file does nothing and I even tried removing the VPN client, the network connections and components and even a manual winsock reset. I cannot resolve internet DNS but can ping all internal IP addresses. The Windows XP computer across from me has no issues. I am not going to update any VPN clients as we still don't have computers who are functional so I need to spend money where it counts before I upgrade computers and I cannot perform a downgrade on this model because the previous person who bought it didn't bother to check Windows XP compatibility before they installed them in 10+ communities.
Here's my IP config - FYI all works well when not connected to the VPN for general web domains.
C:UsersAdministrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : GHN-Green-S01 Primary Dns Suffix . . . . . . . :
[Code].....
View 2 Replies
View Related
Nov 6, 2012
i´m looking for two hours now and can not find a way to suspend a device in the Fault Monitor. We´re using LMS 4.2.2
View 1 Replies
View Related
Oct 13, 2011
I have an inventory added to Ciscoworks and am getting alerts on interfaces that I want to exclude but for the life of me I can't figure out how to exclude interfaces. Any tips on how to exclude interfaces from the fault engine in 4.1.
View 3 Replies
View Related
Mar 18, 2012
i have trying for a few days to connect my HP G7000 notebook to the internet through my wireless but i have tried everything i can think without getting anywhere. I only got it a few days back for my daughter to do her homework ect, but can't get it to connect i see a post on here about updating drivers but i can't get it to connect to do this, then thought about downloading the driver update it may need to my laptop but i really dont want to download anything onto my laptop as its a different model with different drivers and dont want it to stop my laptop working.i get on the HP G7000 is cannot communicate with primary DNS server 194.168.4.100 then underneath that message it is saying Network diagnostics pinged the remote host but did not receive a response
View 3 Replies
View Related
Nov 30, 2011
where the host names do not properly resolve with the right ip address.Example, I ping a host name, it gives me an IP, but when I VNC into the workstation, it is a totally different host.
View 2 Replies
View Related
Apr 23, 2012
My laptop is connected to a router via wifi but it keeps getting a DNS fault. I have another PC linked to the same router via WiFi and that works perfectly all the time. I have the same problem on both google chrome and IE browsers where I just get the message telling me that the DNS look up failed. My internet is still connected as I can dial into my remote CCTV cameras and I can ping website ip addresses. Most times I can just turn off my wireless adapter and turn it back on and it works for another hour or so. But sometimes it wont work all day, unless I start my laptop in safe mode, when it works everytime! I have flushed the DNS cache several times but to no avail.
View 5 Replies
View Related
Feb 8, 2012
My company recently purchased a custom domain name through In Motion Hosting (inmotionhosting.com) which has worked great up until today. As of this morning we are not able to view our webpage online (ronnysinc.com) or any inmotionhosting pages including our email accounts. However, we can view any other website and computers outside of our network seem to be able to view those pages without any problem. [code] As you can see it works fine with any other website such as google. My initial thought was it was being blocked by our firewall but when I log into the router I do not see any firewall settings that would create this block. I also tried resetting the router and flushing the DNS with no success.
View 5 Replies
View Related
Jul 28, 2012
We are running LMS 4.1 and we have more than 150 devices.LMS could not find the fault discovery for 3 switches with partnumber WS-C3560C-12PC-S. This switches are considered as unknown.Ios version is c3560c405-universalk9-mz.122-55.EX3.bin But other things are ok. Inventory Collection ,Config Archive, Topology Data Collection etc . Is there any way to fix ths issue? We have compact switch WS-C3560CG-8PC-S, which is working perfectly for all features.
View 4 Replies
View Related
Aug 8, 2012
LMS discoverd all my devices and updated the DCR. This devices are visible in DFM. For some of this devices i would like to change the threshold values. For some reason the devices are not visible in Monitor->Fault Settings->Seup->Threshold Settings (please see screenshot) Is there another approach to change the threshold values?
View 5 Replies
View Related
Mar 27, 2011
I am using the Cisco VPN Client 5.0.06.0160 - and am having an issue connecting to my ASA 5510 via VPN. This issue is happening on 1 of our laptops. All other laptops connect just fine. So the problem is not in the ASA. I have double checked the client setup and config and it too is correct. The interesting thing is, we are connecting to an IP Address and not a host name.
View 1 Replies
View Related
Feb 4, 2013
How to configure ASA 5520 to resolve names in ASA's. We are currently using ASDM to configure network objects with the hostnames in the internet and then specifying the IP address . But this is done manually. Is there a different way of setting it up on ASA. Also when getting reports from ASA, we see the IP's but is there a way that we could add an identity to the IP's (reverse lookup)
View 1 Replies
View Related
Aug 26, 2012
I've just installed LMS 4.2, like it a lot so far. In the Fault Monitor, the Device Name column shows the device's IP address rather than the host name. We need for it to show the host name, for ease of troubleshooting; most folks don't have the IP addresses memorized. Likewise, when an email is sent out for an event, the managed device field also shows up as the device's IP address.
The devices were all discovered with their IP addresses rather than a host name...should LMS have automatically found their host names? Regardless, I manually updated all of the device's host names, yet they still display as an IP address in the fault monitor.
Also, it appears I need to figure out some way to throttle alerts. One particular device will report an event (ie a temperature out of range) dozens of times in a polling period...several per second, even though it's the same alert.
View 2 Replies
View Related
May 9, 2013
my 1841 router can't resolve dns after enable ios firewall, I try to ping google.com from router's console fail, but dns resolution is fine from lan side.
my partial config---------------------------------
!
ip name-server 8.8.8.8
[Code].....
View 10 Replies
View Related
Jun 27, 2012
I have Windows 7 x64 on my desktop, laptop, and HTPC. The past few months, everything worked fine. Today, I can ping my IP address but I cannot ping the host name on all 3.They also do not show anything in the network window, just the computer that I'm on.
View 1 Replies
View Related
Apr 12, 2012
I am running a webserver locally and I am unable to resolve it by domain name (e.g. mydomain.com) when I am inside my network. However, I am able to hit it internally (e.g. 192.168.0.10) just fine. When I try to access mydomain.com from inside my network it comes up with my Actiontec router's admin page on 192.168.1.1.Here is my configuration:Actiontec FIOS router 192.168.1.1 (connected to internet)DHCP disabled Netgear Router 192.168.1.2 is in the DMZHas cable running from Actiontec's LAN port to Netgear's WAN port[CODE]
View 7 Replies
View Related
Jan 15, 2012
I have been trying to connect to the Internet via a wireless connection but keep receiving the above error. None of the Windows solutions resolve the problem. On Google Chrome I see a screen saying 'This web page is not available', and receive 'Error 105: Unable to resolve the server's DNS address'. I cannot access Internet Explorer either.The strange this is that this problem only seems to occur with some wireless networks, as I can connect fine at home. In certain places, however, I am told that I am connected but that accss is 'Local Only', and I cannot open any browsers. I need the problem resolved as soon as possible as I cannot access the internet where I need it most.
View -1 Replies
View Related
Feb 8, 2013
Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.
View 1 Replies
View Related
Jul 15, 2011
1. I have a DSL modem + wireless + router
2. I have a Vonage phone that taps into one of the LAN ports
3. I have DIR 655 router that taps into one of the LAN ports
4. I have NAS that taps into one of the DIR 655 LAN ports
5. I have Printer that taps into one of the DIR 655 LAN ports
6. I have a BD Player that connects to DIR 655 through wireless.
All my components that are tied to DIR-655 resolve through IP address. I would like to have the resolution through host name as it works with my first router (DSL Modem / Router). Identifying components with IP address is not only inconvinient in terms of reading / recognizing my components but ther could be other issues. I am not very techie on the networking side but I do have some basic knowledge.
View 6 Replies
View Related
Aug 13, 2012
I have a fixed external ip address.I have port forwarding setup for accessing a NAS inside my LAN, lets say port 12345.Now when I use my laptop outside my own LAN, e.g. 99.99.99.99:12345 resolves nicely to my NAS. But when I use the same 99.99.99.99:12345 inside my LAN, it does not resolve. Instead, it gives me a 'server takes too long to answer' error
I have also setup a virtual host to an ip cam inside my network. That one resolves just fine. I tried enabling remote management on the DIR-655 and also that works fine using 99.99.99.99:8888.When I replace the external ip address with the internal ip address of my NAS, thus bypassing port forwarding, it obviously also works ok.
Why the forwarded ports are not accessible when I use my own external fixed IP address? Does the DIR-655 treat it different than other external IP addresses?
View 4 Replies
View Related
May 4, 2013
My Belkin router has an option to set a local domain name, which, I suspect, allows me to address hosts within my own network using this domain. By default, this is set to be "Belkin". Is it possible to call hosts within my network like this, e.g. ping foobar.Belkin instead of ping 192.168.2.4? The thing is, my routers internal page shows all set host names (so dh client seems to work) and the router itself is reachable as router.Belkin, but no other hosts are. My problem here is that the router knows each hosts name, but the hosts don't know each others name. How can I fix that?
Note: Nmap showed that port udp/53 for DNS is open on my router, but I can't find any way to configure it on the Web-interface.
Add:// It's a "Belkin F7D3302 v1"
View 5 Replies
View Related
