Cisco :: LMS 2.6 License Manager / Deamon Manager Is Down
May 12, 2012
Customer is running LMS 2.6.Scheduled backup was running perfect. But it is no more happening.When we checked we found that the "License Manager/ Deamon Manager is down" message pop ups.
We reset the casuser password, and then restarted the services. It becomes ok.But only the immediate backup is successful. Scheduled task fails for all those devices."License Manager/ Deamon Manager is down" happens quite often.
View 1 Replies
ADVERTISEMENT
May 2, 2012
we are running callManager 7.1 (user accounts are tied to AD)... one night our call manager got rebooted by IT. upon reboot, CM failed over to the Subscriber node. Some how IT got Callmanger back over to the Publisher node.....No now of us can log into CallManager using our AD accounts...
View 2 Replies
View Related
Apr 18, 2010
We got recently a Cisco Secure ACS 1120 and i upgraded the Appliance to 5.1 from 5.0 with all your support
Now I need to integrate Cisco ACS 5.1 with RSA Authentication Manager 6.1 . I Successfully Downloaded config file from RSA ACE Server and exported into ACS 1120.
I also Added ACS as a NetOS Agent in the RSA Server , during the process i found few warnings . The ACE Server is not able to Resolve the IP Address to NAme ( DOes it Necessary ?? ).
I havent created any secret Key file for communication between ACS and RSA and encryption i used is DES.
Now when I log into ACS and search for Devices in the Identity Store Sequences i am not able to Look for RSA Token Sever .
View 10 Replies
View Related
Feb 15, 2012
I want to know if the Cisco 2900 series can do UC without having to buy any other hardware.I read through the 2900 series datasheet, and i can understand it does.But will want to clarify if i do not need any other hardware except the Unified Communications License for Cisco 2901-295.Does this mean all i need to activate UC is buying this license?My organisation wants to do UC, especially Voice and Wireless.It requires APs, IP Phones(both wired and wireless).To achieve this on a 2900 series, is all i need just the UC license to work, and then my IP Phones both wired and wireless once plugged to the switch connected to the 2900 series starts working?Or do i still need to buy another hardware for the Unified communication Manager Express ?
View 1 Replies
View Related
Jan 1, 2013
I am having Cisco LMS 3.2.I want to give an access to some desktop administrators so that they can pull the report of User Tracking in campus manager. Is there any way so that I can restric users to campus manager only?
View 9 Replies
View Related
Dec 12, 2011
UTLite33.exe from Campus Manager 3.3 does not want to start, it gives the following:
"UTLite33.exe is not a valid Win32 application".
View 1 Replies
View Related
Dec 4, 2011
I have a XFX Nforce 750a SLI mobo and reinstalled winxp pro and now Im missing the network adapter in device manager. I have a wireless pci card installed and can find that under hidden devices in D manager but no onboard! I do have yellow ? for other devices and yellow ? for everything in there:[CODE]
View 2 Replies
View Related
Mar 13, 2012
i have met connection problems (mainly with xp)where a laptop always have problem connecting to a secured wifi connection that has higher encryption than wep (wpa - wpa2).In general after a few tests . I am almost sure that it is xp's Wireless Zero Configuration's problem.I am wondering if there is alternatives to WZC that does not require their own brand's device to run a 3rd party Wireless Connection Manager.I am not looking for a model specific software either ,
Examples are:
toshiba connect me
tp link connection utility
intel's mobile
View 11 Replies
View Related
Apr 21, 2012
I was trying to fix a diagnosis error under my Internet Connection stating your computer appears to be correctly configured, but the device or resource (DNS server) is not responding. I thought maybe going to Device Manager while showing hidden files selected then go to non plug and play, and then I deleted NetBT, and then a PC reboot. I was very wrong because I have no Internet, and honestly, I only have one PC.I have Windows 7 Home Premium Anytime Upgrade that I bought. It's a 32-bit OS.
View 7 Replies
View Related
Feb 10, 2011
In my laptop WLAN is showing disabled from Device Manager & no Wireless is showing in the Network Adaptar under Device manager.
View 5 Replies
View Related
Apr 20, 2011
I just recently got the internet and I have a desktop computer that has ever rarely been used and it has never had the internet on it. I called tech support of my ISP to see what many be the problem why I can't connect to the internet and found that the source of the problem was I do not have a LAN network connection. When I open Network Connections on the computer, nothing is there. I also went to device manager and there is nothing there for Networking. Under category of "Other Devices" in Device Manager there is a question mark next to "Ethernet Controller". Are there drivers or something I need download to fix this so I can connect to the internet via a DSL connection.
My computer specs are:
Windows XP Professional
Version 2002
Service Pack 2
[Code].....
View 2 Replies
View Related
Feb 18, 2011
Next to network adaptors there are yellow marks in my device manager...as follows.
-??(yellow mark) Other devices
-??? (yellow mark) Unknown device
-??? (Yellow mark) Unknown device
View 1 Replies
View Related
Aug 23, 2012
i cant find Ports (COM & LPT) in device manager . so how can i change that setting?
View 1 Replies
View Related
Jul 30, 2012
I would like to use the Cisco ATA 186 as a SIP device with Cisco Call Manager 7. However, I have found that the SIP firmware for the Cisco ATA 186 is unsupported by Call Manager 7.Therefore, In order to use the ATA as a SIP device with the Call Manager, I believe I will need setup the ATA as a 3rd Party SIP device by doing the following:
1. Disable the TFTP option within the ATA, so that the SIP firmware is not overwritten by firmware from the TFTP server.
2. Install the 3.2.1 SIP firmware on the ATA, since the ATA is currently running the 3.2.4 SCCP firmware.
3. Register the ATA, as a third-party SIP device, with the Call Manager .Should I register the ATA as a 3rd party device?
View 2 Replies
View Related
Sep 15, 2011
I have a CUOM 2.3 and CUCM 7.0 installed, we are planned to have a major upgrade to CUCM to 8.5 soon, do i need to upgrade my CUOM ,since CUOM is a Network management system? If CUOM to be upgraded to 8.X do we need to purchase the upgrade license? Is OM 2.3 to 8.X is a direct upgrade?
View 3 Replies
View Related
Aug 8, 2011
I have 3000 concentrator in 192.168.1.x/24 network (concentrator has static IP of 192.168.1.4/24 assigned to its private int). I can manage it thru HTTP from any PC in the same subnet, but connection failes while trying to connect from PC on different subnet (i.e. 10.1.1.x/24). Is there ACL in concentrator config which needs to be modified to allow management from different subnet?
View 2 Replies
View Related
May 16, 2012
My Customer today have CUOM 2.3 and CUCM 7.1.3. He is planning to do upgrade CUOM 8.6 and CUCM 8.6. My question is: Is it possible to do upgrade CUOM directly to 8.6? If CUOM to be upgraded to 8.X do we need to purchase the upgrade license?
View 4 Replies
View Related
Dec 13, 2012
This is Cisco Prime LMS 4.2.2 on Windows 2008 R2
As far as I understand it Fault Manager need to be able to do reverse lookup for ip adresses to show the correct name in the "device name" column. I have double and tripple checked and all devices that only is shown as an ip address do have a reverse in the dns used by the LMS server. The device is correctly registered and inventory have been run. If I hold the mouse pointer over the crosshair on the row of the offending device all info is shown including correct device name and fqdn.
The server is upgraded from 4.2.1 to 4.2.2 and we have the same problem before the upgrade.
View 2 Replies
View Related
Dec 20, 2010
When trying to start CiscoWorks Daemon Manager i get the following message:"The CiscoWorks Daemon Manager service on local computer started and the stoped. Some services stop automatically if they are not in use by other services or programs."I have tring starting the service from DOS also and get,E:Program FilesCSCOpxsetupsupport>net start crmdmgtdThe CiscoWorks Daemon Manager service is starting.The CiscoWorks Daemon Manager service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534.
View 11 Replies
View Related
Aug 14, 2012
Does two separate SCE 2000 devices can share a collection manager, or do they each need a separate CM? If they can share, is there any special setup on the CM itself?
View 0 Replies
View Related
Jan 19, 2011
Do you know if the NAC Manager supports SSO and LDAP authentication with Windows 2008 R2 Active Directory?
View 3 Replies
View Related
Mar 9, 2011
I have an (old) 1811 router acting as the Internet gateway. My users like to use download managers such as Orbit JDownloader to download large files that should not download. Is there a way to block it? The download managers often start multiple connections and seem to open/cose connections.
View 1 Replies
View Related
Sep 8, 2011
LMS 3.2 Virtual Network Manager Home i am getting this error on lms 3.2.1 in vnm.
View 1 Replies
View Related
Oct 11, 2011
I know the WiSM 2 is like the 5500 WLC regarding the fact that you do not need to configure an ap-manager interface for CAPWAP packets because by default the managment interface acts like an ap-manager interface.
Any major advantages or disadvantages by letting the default action occur?
View 2 Replies
View Related
Feb 19, 2012
I have the following drawback was held on autodicovery on a CiscoWorks LMS 4.0 which captured all the IP's of the devices on the network between these found a LAN segment that connects to all devices, when creating this view for the Campus Manager appears a LAN segment and We don´t want to appear there on the views, can you edit the view and delete this segment of the map. or if it is necessary to rediscover again.
View 2 Replies
View Related
Jan 8, 2013
I'm getting familiar with an existing, working wireless installation that uses a 2504 controller (recently upgraded to 7.3.101.0).
From the documentation, it looks like there should be a "AP-manager" interface by default (static). There is not one.
Configuring the Management Interface (GUI) #
Step 1 Choose Controller > Interfaces to open the Interfaces page.
###
Figure 3-3 Interfaces Page
#
According to that document, there are 4 Static interfaces. On the one I'm working on, there are only two: "management" and "virtual." (There are also a couple of "Dynamic" interfaces that have been set up.)From reading the documentation, it sounds like there should be an AP-manager interface, and that this would have been there by default.
It also sounds like an AP-manager interface is needed:Information About the AP-Manager Interface ## A controller has one or more AP-manager interfaces, which are used for all Layer 3 communications between the controller and lightweight access points after the access points have joined the controller. The AP-manager IP address is used as the tunnel source for CAPWAP packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
Question 1: If I do not have an AP-Manager interface, are the APs connecting at L2? Is there some way to tell on these controllers whether APs are connecting at L2 or at L3 using udp?
Question 2: Is it not the case that one AP-manager interface should be there by default? (I see in the docs that more than one can be created, but in that case I expect that the additional interface(s) would show in the list as "Dynamic" and not "Static.")
A bit of background: The customer network is largely one flat network now, and I'm planning on subnetting it, and routing from the closets up. I want to make sure what may need to be changed in this wireless setup before proceeding. (The main wireless users are also getting IP addresses on the same flat network, at this point. That obviously will change so that they are on their own subnet.)
View 5 Replies
View Related
Jul 6, 2011
I have a pair of managers in HA mode and a pair of servers in HA mode. The solution is working in OOB Virtual Gateway. When i add the server in the manager, which IP address must i use, the service IP address or the physical Ip address.I'm running 4.8.2
View 2 Replies
View Related
Jul 29, 2012
I have installed LMS 4.1 and discover all the devices (router/switches) but i want to show IP Phone on the LMS. I am unable to discover call manager in LMS 4.1 topology.
In Call Manager 8.6 in Cisco Serviceability under snmp setting i have enable the read community string and check snmp, MIB service are running.AM i using the correct proecdure. How can i get the Call Manager on LMS server so that i can see IP phones on LMS topology. 8.6 is installed on VM Ware.
View 4 Replies
View Related
Jul 30, 2012
I setup one network where LMS is in subnet 192.168.5.0/24 and CUCM is in subnet 192.168.1.0/24. both are reachabe to each other and both are also in different EVN/VRF. when i try to discover the CUCM from LMS 4.1. It discover only routers and switches. I am unable to find any CUCM 8.6 server, i did the snmp read community setting in call manager under serviceability.
In addition, IP phones are appeared as END host not as IP Phones. (find attached image)
View 6 Replies
View Related
Apr 28, 2013
I have a cisco NAC Manager v4.6.1 when i restart it, the boot freeze at this msg <ext3 fs mounted filesystem with ordered data mode> and it take a very long time.
The server is pingable but no GUI access during the msg.
View 1 Replies
View Related
Jan 21, 2011
I try connecting to my Linksys wireless N router's setup but it doesnt even find the "site". I have tried pinging the router and i get no response, i have restarted the router and everything, It has never done this before.
View 1 Replies
View Related
Apr 11, 2011
HP computer, was working last friday and today it isnt. Can not connect to the internet or outlook etc. Looked in BIOS says it is conected to LAN - tried enabling and disabling it and re-booting it. Still nothing. Had a tech guy that said to look in device manager, but network adapter was no where to be seen. What shall i try next to resolve this problem?
View 1 Replies
View Related
Mar 21, 2012
Have an hp pavilion a1700n with amd athlon. I switched from Vista to XP, but it's not recognizing some drivers. The network card is not detected on my pc, however the device manager says is working properly!!!??? What can I do? I need to connect to the internet in order to download the other drivers.
View 1 Replies
View Related