D-Link DIR-655 :: Doesn't Resolve Own Fixed IP Address
Aug 13, 2012
I have a fixed external ip address.I have port forwarding setup for accessing a NAS inside my LAN, lets say port 12345.Now when I use my laptop outside my own LAN, e.g. 99.99.99.99:12345 resolves nicely to my NAS. But when I use the same 99.99.99.99:12345 inside my LAN, it does not resolve. Instead, it gives me a 'server takes too long to answer' error
I have also setup a virtual host to an ip cam inside my network. That one resolves just fine. I tried enabling remote management on the DIR-655 and also that works fine using 99.99.99.99:8888.When I replace the external ip address with the internal ip address of my NAS, thus bypassing port forwarding, it obviously also works ok.
Why the forwarded ports are not accessible when I use my own external fixed IP address? Does the DIR-655 treat it different than other external IP addresses?
View 4 Replies
ADVERTISEMENT
Dec 12, 2011
I am setting up a webserver to host our website on our local network. When I'm browsing from an external network, I can pull our website example.com and a sub domain test.example.com. However, when I'm browsing from our internal network, I cannot pull up test.example.com. I am not sure if this is due to propigation issues or what.When I do nslookup from external, it shows my network's main IP address. When I do it from local, it can't find an address and says non-existent domain.Should I have any problems connecting to my website if it is using my external IP address? Will this be a loopback problem? If so, how can I resolve this?
View 3 Replies
View Related
Nov 30, 2011
where the host names do not properly resolve with the right ip address.Example, I ping a host name, it gives me an IP, but when I VNC into the workstation, it is a totally different host.
View 2 Replies
View Related
Jan 25, 2012
I need to create several VLans on my switch.After reading the admin guide pdf, i still don't understand how to create any simple VLan.some tutorial or steps (with IE or Mozilla browser) how to create and use VLan, and to connect one VLan to another.For example,i need to create 3 VLans.
First Vlan consist of 5 ports (Vlan Name = Red)
Second Vlan consist of 15 ports (Vlan Name = Green)
Last Vlan consist of the rest of the ports (VLan Name = White)
View 7 Replies
View Related
Mar 29, 2012
I have a running L2TP/IPsec VPN setup with authentification against a radius server (freeradius2 witch mysql). I would like to have some of my VPN users get a fixed IP address instead of the dynamically assigned IP Pool.
The radius server is returning the correct parameters, I think.
It´s a Cisco 892 Integrated Service Router. Code...
View 2 Replies
View Related
Aug 8, 2011
My company requires each user dial-in must be a fixed IP; The old acs4 can,but I cannot find the same configration item in the ACS5.2
View 2 Replies
View Related
Jan 15, 2012
I have been trying to connect to the Internet via a wireless connection but keep receiving the above error. None of the Windows solutions resolve the problem. On Google Chrome I see a screen saying 'This web page is not available', and receive 'Error 105: Unable to resolve the server's DNS address'. I cannot access Internet Explorer either.The strange this is that this problem only seems to occur with some wireless networks, as I can connect fine at home. In certain places, however, I am told that I am connected but that accss is 'Local Only', and I cannot open any browsers. I need the problem resolved as soon as possible as I cannot access the internet where I need it most.
View -1 Replies
View Related
Feb 8, 2013
Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.
View 1 Replies
View Related
Mar 27, 2011
I am using the Cisco VPN Client 5.0.06.0160 - and am having an issue connecting to my ASA 5510 via VPN. This issue is happening on 1 of our laptops. All other laptops connect just fine. So the problem is not in the ASA. I have double checked the client setup and config and it too is correct. The interesting thing is, we are connecting to an IP Address and not a host name.
View 1 Replies
View Related
May 9, 2010
I am trying to configure the ACS with AD in the identity store but am running into the following issue.I enter the AD Domain Name and username and password and hit the 'Test Connection' button and receive a DNS error stating that it 'Cannot resolve network address'.I have logged into the CLI and test to the domain name from there and it works fine.
View 5 Replies
View Related
Dec 27, 2011
I'm connected through the router, a few times a day I cannot open web pages, getting error: Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.Skype continues to work. Here are the results of pinging:
Quote:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersSri Guru>ipconfig /all[code]....
One technician said that this is the providers problem, but I don't think so. When I restart the modem everything works.I have a Netgear WGR614 v9 router.I use ESET 5 security. Btw, connection drops on all computers connected through the router, so it's not my firewall.
View 3 Replies
View Related
Jan 22, 2013
I have multiple computers on my network as well as cell phones logging in as wifi. At least once a day I have trouble or another computer has trouble getting on line through my network. I have to unplug my router and replug. Its as if it doesn't recognize the ip address until reboot.
View 1 Replies
View Related
Jan 5, 2011
My DIR-655:
Hardware Version: A4
Product Page: DIR-655
The problem is that Website Filer doesn't work if on STEP 3: SELECT MACHINE of Access Control the machine was selected by MAC address. When the machine was selected by IP everything is fine.The problem is that IP addresses are assigned dynamically, so how to make sure that the policy would be applied to the same machine?
View 8 Replies
View Related
Dec 25, 2012
Region : Brazil
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
First of all, by connecting the router to my desktop through wire, it doesn't generate any IP address, except for 169.254.x.x.. I already tried configuring the IP to static mode, but nothing changed, I can't even access the router's interface, however, if I try the same thing (connecting the router through wire) with my notebook and netbook, I get the IP without any problems.
The second problem is related to the wireless connection. When I try to connect my smartphone (Motorola XT860) I get the IP normally and supposedly internet connection, however the connection only lasts for a few seconds, after that I am incapable of accessing even the router's interface (again). If my smartphone stays connected to the router, nothing else works even for other connected devices, but when I disconnect my smartphone, all the other connections resume as if nothing happened. I already tried changing the Beacon Interval, the Address Lease Time, and so on, but nothing has worked.
View 14 Replies
View Related
Jul 15, 2011
1. I have a DSL modem + wireless + router
2. I have a Vonage phone that taps into one of the LAN ports
3. I have DIR 655 router that taps into one of the LAN ports
4. I have NAS that taps into one of the DIR 655 LAN ports
5. I have Printer that taps into one of the DIR 655 LAN ports
6. I have a BD Player that connects to DIR 655 through wireless.
All my components that are tied to DIR-655 resolve through IP address. I would like to have the resolution through host name as it works with my first router (DSL Modem / Router). Identifying components with IP address is not only inconvinient in terms of reading / recognizing my components but ther could be other issues. I am not very techie on the networking side but I do have some basic knowledge.
View 6 Replies
View Related
Feb 25, 2013
I am having this problem on my acer intel core i3 laptop I think my Network adapter is corrupt I cannot connect to my Netgear(home) router anymore... I use to be able to troubleshoot/diagnose and fix the error but now it doesn't fix it anymore.Wireless works though...the problem only occurs when I plug a network cable into the NIC... I have tried other network cables and the router at work but it gives me the same error.things I have tried to fix NIC that did not work
cmd- iprelease/renew
changing things in the registry
changing mac address
updating netgear firmware
updating NIC driver
uninstalling the bonjour service
I have tried putting the ip address...dns in manually?i am running on windows 7?
View 1 Replies
View Related
Apr 8, 2011
How come my IP address does not change when i'm using my router.... (TP-link WR340G)But when i connect my DSL directly to my computer it my IP can be changed..... and when i put back my router my IP address is the same.
View 1 Replies
View Related
Nov 16, 2011
ok the connection is a dial up it doesn't give any static ip address when i connect it now it will give me different ip , when i disconnect it again it will give me another ip. an the message appear at the server and the affect the client.....the client are using satic ip address.
View 1 Replies
View Related
Nov 14, 2011
I can sign on with all tools (i.e. phone, PC, etc.), but for whatever reason, I am having issues connecting my laptop. I'm running Windows 7 on a newer laptop. I tried changing the password and it worked for a minute, but now that's not doing the trick. It keeps telling me it doesn't have a valid IP address.
View 2 Replies
View Related
Jan 26, 2011
I'm trying to configure Cisco CISCO881G-K9 3G router to connect to mobile network without success. The cellular interface gets up but it doesn't receive IP address. It seems that profile isn't activated and it should've been.
I've attached running config and some other information gathered from router.
View 7 Replies
View Related
May 12, 2012
I had just restarted my computer last night, and may have ended a process on the task manager that might have caused my internet to cease working and this error message to appear. Ive tried resetting the modem/router, resetting winsock and tcp ip whatnot in the command prompt?
View 5 Replies
View Related
Sep 16, 2011
i m not about to convinced what above are mentioned coz. i am having same problem (tried already above given tricks but noway to geting intenet access) is anbody there to reply from this tech center or simply this i called tech center without tech people..
View 1 Replies
View Related
Feb 22, 2012
I have been getting overrun errors on 3 different ASA 5550 HA pairs with traffic rates less than 100Mbps total. I was told by one TAC guy to split the traffic between the two slots so that traffic comes in one and exits the other to maximize throughput because the 5550 was designed to work that way. Another TAC guy told me to enable ethernet flow control to alleviate the overrun errors because the traffic was bursty, but this doesn't seem to address the root cause of the problem to either. TCP traffic is bursty by nature and has it own flow control mechanism. I can't seem to find any detailed info on why traffic needs to be split for 100Mbps when the marketting throughput number is 1.2G. Is this a design flaw or limitation? Is there a way to alleviate overrun errors?
View 25 Replies
View Related
Jun 13, 2012
I want to make a small LAN, not connected to the internet. I open control panel/networking and find my Ethernet adapter. I unchecked IPv6 and click on IPv4 and select "Properties". I gave a fixed IP address of 192.168.1.1 butI can't ping 192.168.1.1
And a program I wrote can't access a MySql database on that address. I am using Xampp, the program can access the database if its connect string says localhost, not 192.168.1.1 Also, I can access through PhpMyAdmin and invoking MySql from a Dos box - so, MySql seems to be ok. Wondering why I can't ping, I run IPCONFIG and my Ethernet adapter's address is the old one, not the new fixed one that I assigned.
[UPDATE] I haven't attached a router yet, it's a stand-alone PC. Thanks for pointing out that the router, when added, will probably be 192.168.1.1 so I should probably make my PC 192.168.1.2. but my point here is that I can't ping what I thought I set as my static IP and, indeed, it does not show up when I run IPCONFIG - I get the previous value.
View 3 Replies
View Related
Apr 5, 2013
giving unauthorized access and no internet access
Windows IP Configuration
Host Name . . . . . . . . . . . . : KHANBALOCH-PC
Primary Dns Suffix . . . . . . . :
[Code].....
View 2 Replies
View Related
Apr 4, 2012
My Speedtouch 516v6 modem does'nt provide gateway adress to the TP-Link router. The modem can work in bridged mode or routed mode and I want to use routed mode. TP-Link has PPPoE mode but I would like to use a dynamicIP mode in which the router obtain network parameters from the modem and it does, but it does not obtain a gateway address.
View 2 Replies
View Related
Nov 10, 2011
My WRVS4400N, V2.0.2.1CPU:STAR 9202.Doesn't allocate IP address on DHCP for anything but the Open SSID. All others, WEP, WPA, WPA2, nothing.I tried different clients, Intel Centrino wifi, Cisco, AG-CB21 same results.The config is std, I tried one VLAN for ALL SSID, I tried different VLANS, same.
View 0 Replies
View Related
Nov 20, 2012
I am trying to configure the Wism running on a 6500 switch.... I have configured the DHCP scope for the AP on the controller itself with the same subnet as of the management for the controller. The AP gets the IP but once it restarts it doesn't register to the controller, this is the log i get on the AP when consoled into it. [code]
View 6 Replies
View Related
Jul 10, 2012
I'm configuring a catalyst 3500XL, but I'm having a problem, when I connect an ip phone it works just fine but if I connect a computer to the pc port in the phone the computer doesn't get an ip address. The switch is configure with two vlans Voice and Data and is connected from fa0/24 to a Catalyst 3560 fa0/46. I did configure both ports as trunk.
View 9 Replies
View Related
Aug 9, 2011
RVS4000 router doesnt give out an IP address to a client connecting with QVPN v1.303, connection seems good, router logs the connection and tracks its duration etc but client side does not get an IP from the RVS4000 side -keeps local LAN ip + there is no access to the remote shares etc. RVS 4000 has DHCP enabled. Client side subnet is different to the VPN side. VPN users are setup correctly (Router logs the user as connected) . Port 443 is not setup in port forwarding.
View 3 Replies
View Related
Jan 23, 2012
I have a problem with my WAN ports. I can´t obtain a ip adress from my ISP. I´ve tried factory reset. Upgrade to lateset firmware. Clone MAC adress from my PC. Nothing is working.
But when I plug the WAN port into my Old router it receives an adress directly. When I plug the ISP connection directly into my pc or the old router it´s working as well.
I am using the latest firmware: RV0XX-v4.1.0.02-tm.bin
And My ISP has an interface with an ADSL modem SmartAX with DHCP.
View 2 Replies
View Related
Apr 16, 2013
my 5505 running on version 8.2.5 doesn't seem to recogize the simple command "ip address dhcp setroute......"
ciscoasa(config-if)# ip address dhcp
^
ERROR: % Invalid Hostname
ciscoasa(config-if)# ip address ?
configure mode commands/options: Hostname or A.B.C.D Firewall's network interface address
View 7 Replies
View Related
Aug 16, 2011
RVS4000 router doesnt give out an IP address to a client connecting with QVPN v1.303 (or v1.4..- tried that too), connection seems good, router logs the connection and tracks its duration etc but client side does not get an IP from the RVS4000 side -keeps local LAN ip + there is no access to the remote shares etc. RVS 4000 has DHCP enabled. Client side subnet is different to the VPN side. VPN users are setup correctly (Router logs the user as connected) . Port 443 is not setup in port forwarding. (posted in LAN Routing & Switching 2 days ago but I got no response so I thought Id try here !)
View 3 Replies
View Related
