Setting Up A Fixed IP In Windows 7
Jun 13, 2012
I want to make a small LAN, not connected to the internet. I open control panel/networking and find my Ethernet adapter. I unchecked IPv6 and click on IPv4 and select "Properties". I gave a fixed IP address of 192.168.1.1 butI can't ping 192.168.1.1
And a program I wrote can't access a MySql database on that address. I am using Xampp, the program can access the database if its connect string says localhost, not 192.168.1.1 Also, I can access through PhpMyAdmin and invoking MySql from a Dos box - so, MySql seems to be ok. Wondering why I can't ping, I run IPCONFIG and my Ethernet adapter's address is the old one, not the new fixed one that I assigned.
[UPDATE] I haven't attached a router yet, it's a stand-alone PC. Thanks for pointing out that the router, when added, will probably be 192.168.1.1 so I should probably make my PC 192.168.1.2. but my point here is that I can't ping what I thought I set as my static IP and, indeed, it does not show up when I run IPCONFIG - I get the previous value.
View 3 Replies
ADVERTISEMENT
Jan 25, 2012
I need to create several VLans on my switch.After reading the admin guide pdf, i still don't understand how to create any simple VLan.some tutorial or steps (with IE or Mozilla browser) how to create and use VLan, and to connect one VLan to another.For example,i need to create 3 VLans.
First Vlan consist of 5 ports (Vlan Name = Red)
Second Vlan consist of 15 ports (Vlan Name = Green)
Last Vlan consist of the rest of the ports (VLan Name = White)
View 7 Replies
View Related
Aug 3, 2012
who had a WMP300N with the Broadcom 4329 chip (PCIVEN_14E4&DEV_4329&SUBSYS_00601737&REV_01)Since i got my WMP300N all that i got is a really a big headache, since the drivers DOESN'T are meant for Win 7 (x86/x64), and the guys at Cisco/Linksys really are so kind to bring an unstable driver (v6.100) that they claim is for win 7.
i, as same as a ton of users, really get dissapointed because the driver in the cd does not work on win 7 and the 'official updated driver' is useless as well, and in the end lost a lot of time searching almost in the entire internet for a solution, that some pages claim to have, but the info is oudated, or the links are gone.so in a insurmountable-almost-titanic search, i somehow managed to gather all the required files that i'll put at disposition of those like me have a bad time with a supposed to be a pretty good wireless card.
1- bmc 4329 v4.100, this one is the most 'stable' and works pretty well in 32/64bits, it had a modded .inf wich enables a few features that various users will find pretty useful, when the installer prompts a warning about an unsigned driver, you had to allow the installation
2- bmc 4329 5.100, this one is working too on 32/64 bits, i'm posting it because some people got problems with the 4.100 version, however, the 5.100 is a stock unmodded driver, so maybe it will give connection issues.
View 1 Replies
View Related
Feb 13, 2012
I need to setup a VPN with two Windows 7 computers to enable file sharing so that I can ideally map a network drive to the server from the client. I�ve got it to the point where the VPN connects but when I try to ping between any of the computers on the two networks it doesn�t go.
My client ipconfig shows:
[code]...
View 1 Replies
View Related
Apr 5, 2012
I am trying to set up a ICS on widows 7 through my laptop. My LT has 2 Adapters. One Ethernet and one wireless. I am plugging in through the Ethernet.I am to trying to set up ICS for my iPhone and iPad. When I set up the ICS my iPhone picks up the network but says it is unable to connect after typing in the pass.I have enabled sharing. I then went and turned security off. Tried connecting again and it allowed me To connect. It says I was connected but my iPhone says it is on 3G.
View 2 Replies
View Related
Aug 13, 2012
I have a fixed external ip address.I have port forwarding setup for accessing a NAS inside my LAN, lets say port 12345.Now when I use my laptop outside my own LAN, e.g. 99.99.99.99:12345 resolves nicely to my NAS. But when I use the same 99.99.99.99:12345 inside my LAN, it does not resolve. Instead, it gives me a 'server takes too long to answer' error
I have also setup a virtual host to an ip cam inside my network. That one resolves just fine. I tried enabling remote management on the DIR-655 and also that works fine using 99.99.99.99:8888.When I replace the external ip address with the internal ip address of my NAS, thus bypassing port forwarding, it obviously also works ok.
Why the forwarded ports are not accessible when I use my own external fixed IP address? Does the DIR-655 treat it different than other external IP addresses?
View 4 Replies
View Related
Jul 19, 2012
It works fine on both my pc and wifi laptop, provided I give a fixed DNS server that was entered by my internet provider. My IP address is set to 'obtain IP address automatically' but my DNS is set to a preferred DNS by the provider. I have to set this on my notebook as well in order to access internet. If I set it to obtain DNS server automatically, internet stops working on that machine.roblem is when I try to access internet through my phone it does not work, because I have no option to enter a DNS server there. Internet works fine on my phone using another wifi router where the obtain dns address automatically is enabled.
View 1 Replies
View Related
Feb 22, 2013
I live in an area where there are lots of wireless modems and since most broadcast on the default frequencies, here is often interference. I'd like to set my AC900 to broadcast on a fixed channel that is not often used, e.g. 2 or 3 or 8.
View 2 Replies
View Related
Jan 22, 2013
I am looking upgrade my ASR routers to a newer code. I am running asr1000rp1-advipservicesk9.03.03.01.S.151-2.S1.bin now. Would like input on what a good stable version is. I am not bleeding edge so the latest version I won't trust.
View 5 Replies
View Related
Jan 8, 2012
Im in the process of trying to setup a home network. Computer A and Computer B are in the same workgroup. Username/password are the same.
Computer A = Windows XP sp3
Computer B = Windows 7 sp1
The two computers can communicate on the network. Can ping back and fourth with ip and computername. Computer B can access from what I can tell the whole C:/ drive from computer A. Doesnt ask for a password or anything like that. Just works the way it should.
However, I cant figure out how to share the C: drive from Computer B with Computer A.
Computer B
Click on C: >> Properties >> Sharing
And this is what i see on the sharing tab
It looks like its shared cause i see the \inteli5c. But when i go onto the other computer I cant access it. This picture doesnt seem to want to work. But that link is the screen that comes up when i try to access the C: from the opposite computer.
View 7 Replies
View Related
Nov 29, 2012
i am setting up a network with a server able to run windows server 2008 and using duo core computers as work stations. Will it work with using windows 7 as the operating system for the work stations?
View 5 Replies
View Related
Feb 16, 2013
I have a client that has a 5505 installed. They want to VPN in with their Win7 laptop, but they don't want to shell out $1000 for the 10-pack Cisco VPN client.I have successfully setup the clientless VPN, and they can, through a browser, get to their files, but they'd like to map network drives so it's just like they're in the office.I tried setting the IP Sec up on the 5505, and then using the built-in Win7 VPN network connection, but no go.I also do everything through the ASDM, but I realize some things cannot be done. I'd prefer to use the ASDM!Anyone else get this configured? 99% of what I see out here is how to connect the 5505 for site-to-site VPN.
View 4 Replies
View Related
May 10, 2013
I have a Belkin Play N600 HD router. Does it have the capability to let me assign fixed IP addresses to devices like printers, NAS drives, and cameras so I know where they are?
View 2 Replies
View Related
Mar 29, 2012
I have a running L2TP/IPsec VPN setup with authentification against a radius server (freeradius2 witch mysql). I would like to have some of my VPN users get a fixed IP address instead of the dynamically assigned IP Pool.
The radius server is returning the correct parameters, I think.
It´s a Cisco 892 Integrated Service Router. Code...
View 2 Replies
View Related
Jan 23, 2013
When I read Nexus 5K install guide , I found the follow :The Cisco Nexus 5596UP switch has the following features: # •48 fixed 1- and 10-Gigabit Ethernet server connection ports on the back of the switch AND The 48 fixed ports support 8-, 4-, 2-, or 1-Gbps Fibre Channel transceivers and 1- or 10-Gigabit Ethernet transceivers. Does these is a conflict ?The 48 fixed port on this switch support only 1- and 10-Gigabit Ethernet or 8-, 4-, 2-, or 1-Gbps Fibre Channel and 1- or 10-Gigabit simultaneously ？
View 2 Replies
View Related
Aug 8, 2011
My company requires each user dial-in must be a fixed IP; The old acs4 can,but I cannot find the same configration item in the ACS5.2
View 2 Replies
View Related
Mar 27, 2011
I have an ADSL connection and have configured the PPPoE subinterface on WAN1 (ADSL) this connection has a static IP, and I know that the ISP gives that to me through DHCP however I have 4 or 5 additional IP addresses also provided to me on that same link, and they are not given to me via DHCP.
How do I configure this router to have multiple fixed IP addresses on a PPPoE interface?
I also need to port forward some ports for each of the IP's but I assume this will be easy after i have the IP addresses setup.
View 4 Replies
View Related
May 23, 2013
Is the onboard interfaces on an ASR router (4x on ASAR1002, 6x on ASR1002-X) are fixed gigabit or are they 10/100/1000 ?
I assume the interfaces on the 8port Gigabit SPA module are fixed gigabit speed ports (why otherwise sell a 10/100 8port SPA module also ?) no ?
View 2 Replies
View Related
Jan 30, 2012
I have set up a home network some time ago, using a 4-port wired router. All four ports are in use, one of which by my own desktop computer running Windows XP Home, SP3.I recently received a new laptop running Windows 7 Home Premium (64 bit). Because I can't afford a wireless router at the moment, I've been trying to set up my Windows XP computer as a wireless access point (using a Wireless LAN PCI card), so I can connect my laptop to it and share my internet connection.However, when I try to set up an ad hoc network on my XP computer, it doesn't show up in the list of available networks on my laptop, though it does show up on the XP computer, with the message that it's waiting for other computers to join.The same thing happens the other way around. When I try setting up an ad hoc network on my laptop, it doesn't show up on my desktop computer.
View 3 Replies
View Related
Mar 4, 2011
I have a small office (7) people and I don't have Active Directory setup. I'm wondering what is the best/easiest way to setup a place on a network server for the team to connect and put files that will then be backed up. With Active Directory this used to be a snap but I don't have much experience outside that realm. Here is how I'd like it to work:1) I login to server as admin, create the individual folders that users can map to. Example: Software Downloads, Jason, Robert, Billy, Carol2) I'd like to be able to set the security on the folders to say that everyone can view certain one but Jason can't view Roberts folder etc.
View 1 Replies
View Related
Apr 25, 2013
i've been having problems hosting a wireless network on my dell inspiron 7720, windows 8. each time i set up a new network, it successfully sets up but then i don't find it afterwards, neither do others who try to connect.
View 1 Replies
View Related
Jun 15, 2011
We have recently purchased some Cisco 3750x switches and we are getting complaints from users that the performance is poor when both the PC's NIC and switch port are fixed at 100/Full?
There are no errors or collisions on the switch interfaces so there is no obvious problem on the switch. The PC's are standard DELL Optiplex 755/760's
or gx 520's.
Any performance issues when configuring the switchport to 100/FULL?
View 2 Replies
View Related
Jun 19, 2012
This is IOS 15.1(4)M3 on a 1921 router. The LAN is 192.168.42.1/24. (DHCP config is further down.) We have a small range that we want to assign via DHCP to devices; .200 through .220 . At the same time, we have a handful of Macintosh systems to which we want to assign a specific address that is not in that 200-220 range. I don't want to configure the assignment based on the Ethernet MAC addresses because these systems might connect via UTP or wireless; that is to say, they have more than one MAC address. They only ever connect using one interface/MAC address at a time, but it's their choice; in some areas wi-fi is available, and in some areas they have to cable-up.
The Mac OSX network settings has a field for "DHCP Client ID". It would be much easier to tell the users of these systems to put their Mac's name in the Client ID field for both their wired and wireless DHCP configs. (As opposed to having them all lookup, and then give me their Ethernet MAC addresses for both of their interfaces.) I tried this with my Mac's (named "shrike") wi-fi interface, but I don't get the 192.168.42.14 address that I expected. I get an address from the .200 to .220 range.
Here's the DHCP-related config from the router:
router#sh run | s dhcp
ip dhcp excluded-address 192.168.42.1 192.168.42.199
ip dhcp excluded-address 192.168.42.221 192.168.42.254
ip dhcp pool OurOffice
network 192.168.42.0 255.255.255.0
[code]....
Is "client-name" the wrong place to configure the DHCP Client ID?
View 3 Replies
View Related
Apr 6, 2013
SetupWizard fails for the WRT54GL. I'm using Windows 7. Even though the software failed the router WRT54GL seems to work.Why did the SetupWizard fail?
View 1 Replies
View Related
Mar 23, 2013
I've setup a home network using Netgear N300 wireless router (using Windows 7).
I'm trying to get one of my hard drives to be available on the network, so I went to the "sharing" tab of the HD's properties setting and allowed sharing on the HD and turned off password protection so that you don't need a password to access the HD.I also set the permissions to give full control, change, and read access to the "Everyone" group.
From another computer in the network, I tried connecting to the network HD but ultimately got "Access denied" despite the fact that I gave full control to "Everyone".How do I get the computer to be able to connect to the shared HD?
View 2 Replies
View Related
Jun 7, 2011
I need to control the rate at which my WUSB600N adapter connects to my access point. By default, it rate adapts through negotiation with the access point based on a set of possible rates. Can I restrict the set of rates my adapter can use (without re-writing the driver ). I've looked at netsh which provides stats about the rate my adapter is actually using but doesn't appear to allow me to set the desired rate. I'm using Windows Vista by the way.
View 4 Replies
View Related
Apr 28, 2012
I am little confused about the location of FIB table and adjacency table in both cisco 6500 series and fixed ports switches .In case of 6500 series switches
"Central CEF mode:The CEF FIB and adjacency tables reside on the route processor,and the route processor performs the express forwarding. Use this CEF mode when line cards are not available for CEF switching, or when features are not compatible with distributed CEF."
If line cards do no support CEF, then FIB and adjacency tables are built and are located on route processor( control plane ). Data plane operations are implemented in software and route processor performs those operations.
Some Cisco switches actually use different hardware to control the different planes. For example, the Cisco Catalyst 6500 is a modular switch that uses the Multilayer Switch.Feature Card (MSFC) for control-plane operations, and the supervisor Policy Feature Card (PFC) for the data-plane operations.
Supervisor module has has MSFC and PFC. MSFC implements control plane operation where as PFC implements data plane operation.But the first paragraph says in Central cef mode, both data plane and control plane operations are implemented by route processor. [code]
Do these switches implement the Central mode cef in same way as mentioned above. i.e
"Central CEF mode:The CEF FIB and adjacency tables reside on the route processor and the route processor performs the express forwarding. Use this CEF mode whenline cards are not available for CEF switching, or when features are not compatible with distributed CEF."Or fixed ports switches such as 3750 implement data plane operation in hardware where FIB tabe and adjacency table are maintained on Data plane.
View 3 Replies
View Related
Feb 16, 2012
Any "best practices" or recommendations on how to migrate from a fixed router (3745) to vlan routing on Catalyst 4507 switches in order to minimize the disruption to the network.
View 4 Replies
View Related
Oct 14, 2012
if I can use the encrypted port as unencrypted ethernet ports? url.. Each individual port on the Cisco Nexus 5010 switch is numbered, and groups of ports are numbered based on their function. The ports are numbered top to bottom and left to right.There are 20 to 28 ports on the Cisco Nexus 5010 switch, depending on which GEM is installed.
The 20 fixed ports form group 1 and are named 1/port_number. Ports 1 through 16 are unencrypted Ethernet ports. Of these, ports 1 through 8 are 10-Gigabit Ethernet and 1-Gigabit Ethernet-capable ports. Ports 17 through 20 are encryption-capable Ethernet ports.
View 1 Replies
View Related
Jan 12, 2012
Scenario using ASA V8.4
RemoteLan - Router Dynamic WAN IP ----------- site to site VPN --------------ASA - ASA Lan 192.168.1.0/24
10.1.1.0/24
I am trying to get my head round configuring an ASA with V8.4 code where things have changed especially NAT.In earlier ASA 7/8.x code I belive the crypto map below would have allowed a properly configured remote router to connect irrespective of its WAN IP
I am struggling to get my head round how I achieve the same in ASA V8.4 . I have searched the web and found plenty of examples for earlier code but specificlly am trying to learn about how to achieve it with v8.4
access-list outside_cryptomap_20.1 extended permit ip 192.168.1.0 255.255.255.0 10.1.1.0 255.255.255.0
nat (inside) 0 access-list outside_crypto_map_20.1
crypto ipsec transform-set myset esp-des esp-sha-hmac
crypto dynamic-map cisco 1 match address outside_crypto_map_20.1
crypto dynamic-map cisco 1 set transform-set myset
[code]....
View 12 Replies
View Related
Jan 28, 2013
I run a certain program in my PC and I need to make its data available to an iPhone app.I would like to broadcast it over WIFI from the laptop.How can I set up a simple wifi network so the iPhone can connect as described?I was thinking of wireless router connected directly to the PC.
View 6 Replies
View Related
Nov 25, 2012
My new Windows 8 computer is not wi-fi capable, I bought the adapter but it only works with Windows 7, they have a link to upgrade to Windows 8 but I don't know where to go from there.
[URL]
View 1 Replies
View Related
Dec 15, 2011
My win xp pro 32bit cannot add network printer kxp1121 from win 7 64 bit which is using epson lx series 1 (80). Request driver ' unknown Inf'
View 1 Replies
View Related
