I have a running L2TP/IPsec VPN setup with authentification against a radius server (freeradius2 witch mysql). I would like to have some of my VPN users get a fixed IP address instead of the dynamically assigned IP Pool.
The radius server is returning the correct parameters, I think.
It´s a Cisco 892 Integrated Service Router. Code...
My company requires each user dial-in must be a fixed IP; The old acs4 can,but I cannot find the same configration item in the ACS5.2
View 2 Replies View RelatedRecently I've installed this particular cisco ASA5510 at a client site (Head office), along with remote access VPN setup. All most 32 branches(one user from each branch) connect to the head office via remote access vpn.
Further I've used the "vpn-framed-ip-address" command along with a dedicated ip address, under each "user attributes", so every time when a user connect, he used to get the same ip address from the VPN pool.
My problem is sometimes this setup works fine, but once in a while the same ip address will be assigned to two different users at the same time, despite of the "vpn-framed-ip-address".
I'm trying to achieve framed-ip-address/static ip address for some remote access vpn clients and ip allocation from pool dynamically for remaining remote access vpn clients. I've configured my asa [URL].
I'm using local database for user authentication. Remote users can connect and always gets IP address from pool only and never gets the framed-ip I configured for those particular users.
A short background. Our corporate SSID is being migrated from using PEAPv0 to EAP-TLS. This restricts access only to company notebooks. Additionally we have barcode scanners which are used to inventory assets. Those devices are not able to use EAP-TLS as they cannot be integrated in the domain and being unable to do certificate based authentication.
As a workaround we planned to use another SSID with access to the same network but using PEAPv0 as authentication method, basically the same SSID but with a different name. As this naturally allows anyone to access the corporate network with a valid username/password I now wanted to add another step into the authentication process - the MAC of the device. I know I can do the filtering at the WLAN controller, but as it has a limited database as well as the fact that it is cumbersome to maintain the MAC list on all the controllers I thought I can do it over our ACS system.
I am now trying to accomplish the following: The user gets authenticated via the internal user store, which is succesful. Now I want to authorize the user via the MAC address, which is stored in the internal host store of the ACS, if access is granted or not.
For this I created the following policy:
Service Selection Policy -- (Rule based result selection)
-- (NDG:Device Type in All Device Types:Wireless And RADIUS-IETF:Called-Station-ID contains <SSID>) | Result: PEAP access
-- Default | Result: DenyAccess
Service PEAP access Identity: Internal Users -- (Single result selection) Authorization -- (Rule based result selection) -- Internal Hosts:HostIdentityGroup in All Groups:Valid_MACs
When I then try to access the wireless network I won't get authenticated. The error I get, when I look into the logs is: 15039 Selected Authorization Profile is DenyAccess
Is it not possible to use one identity store as "attribute database" for the other identity store?
Actually I have a lab with ACS 5.3 running with 802.1x, but when when the user is successfully authenticated, it's assigned and IP address from the DHCP server, is there a way to assign a static IP address depending of login username??
View 13 Replies View RelatedAt first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I dont't know how to do it.
I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this:
Step 1Add a static IP attribute to internal user attribute dictionary:
Step 2Select System Administration > Configuration > Dictionaries > Identity > Internal Users.
Step 3Click Create.
Step 4Add static IP attribute.
Step 5Select Users and Identity Stores > Internal Identity Stores > Users.
Step 6Click Create.
Step 7Edit the static IP attribute of the user.
I just do it,but it's not work.When I use EasyVPN client to connect ASA 5520,user could success to authentication but will not get the static IP address which I configure on Internal Users,so the tunnel set up failed.I try to Configure a IP pool on ASA for ACS users get IP address,and use EasyVPN client to connect ASA , everything is OK,user authenticate successed.but when I kill IP pool coufigurations and use the "add a static IP address to user "configurations,EzVPN are failed. how to use ACS 5.2 to create a static ip address user for remote access VPN?
I have a fixed external ip address.I have port forwarding setup for accessing a NAS inside my LAN, lets say port 12345.Now when I use my laptop outside my own LAN, e.g. 99.99.99.99:12345 resolves nicely to my NAS. But when I use the same 99.99.99.99:12345 inside my LAN, it does not resolve. Instead, it gives me a 'server takes too long to answer' error
I have also setup a virtual host to an ip cam inside my network. That one resolves just fine. I tried enabling remote management on the DIR-655 and also that works fine using 99.99.99.99:8888.When I replace the external ip address with the internal ip address of my NAS, thus bypassing port forwarding, it obviously also works ok.
Why the forwarded ports are not accessible when I use my own external fixed IP address? Does the DIR-655 treat it different than other external IP addresses?
I need to create several VLans on my switch.After reading the admin guide pdf, i still don't understand how to create any simple VLan.some tutorial or steps (with IE or Mozilla browser) how to create and use VLan, and to connect one VLan to another.For example,i need to create 3 VLans.
First Vlan consist of 5 ports (Vlan Name = Red)
Second Vlan consist of 15 ports (Vlan Name = Green)
Last Vlan consist of the rest of the ports (VLan Name = White)
We are running ACS 5.2 patch 6 and want to restrict access for users to be able to add devices to the system.For example, admin person in site A can only add devices into the site A group and cannot see/access other sites groups.
View 1 Replies View RelatedI'm configuring a Cisco 7206 NPE-G2 as B-RAS for PPPoE over a Gigabit Ethernet interface. Everything is OK but I'm having problems when i try to pass the framed-route attribute from the RADIUS to assign a /29 sub net to a PPPoE client, the 7206 seems to skip it and no route is installed in the routing table.
This is the configuration:
upgrade fpd auto
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
[code]......
I tried also with Cisco-AVpair ip:route with the same results.
We are running two ACS appliances but we cannot figure out how we can add a user into 2 differents groups.Here's the context :We have a company A which is having devices, this company uses Group A.then we have a company B which is having devices, this company uses Group B.But the admin has to manage the devices for both companies A & B.We don't want to mix devices from company A with company B.Is there a way to add the user into both groups A & B.
View 5 Replies View Relatedwhat is the maximum user IDs that I can create to the ACS server? The client have an ACS appliance with version 5.2.
View 2 Replies View RelatedWe are using ACS 5.1 in our network. We have created users and grouped them as per the requirements. We want to restrict the user sessions in the network. A user should authenticate and able to access a network resource. But when he is active with that session, we need to block him from another successful authentication. We want to avoid multiple users using same user credentials for logging into the devices. whether this can be achieved by making configuration changes in ACS.
View 2 Replies View RelatedI have ACS 5.1.I have created the Identity Group 'Admin' and added 2 users in that, say User1 and User2.How do I permit only User1 to get authenticated when he logins in to the device?There is option to select 'UserName' while creating Service Access Policy , but I have observed that though I have mentioned only User1 in the rule, User2 is also getting permitted
View 1 Replies View Relatedi have cisco ACS 5.2 and want to create user account for technician, with only certain commands.
View 3 Replies View RelatedOn the ACS ver5, there is a "User Change Password" feature. When i click the UCP WSDL, it gives me a page with WSDL language. how is it supposed to be installed? does it copy or install to any web server
View 1 Replies View RelatedMy company's security group uses Tripwire to monitor for changes in start-config and running-config on network devices in PCI scope. We are migrating from ACS v4.2 to v5.2. I need to create the account for Tripwire on the ACS Appliance but did not want to assign the admin role which would give access to configure terminal. The user role does not have privileges for show start-config or show running-config. Am I missing something or are these the only 2 roles available at the CLI? Can another rolle be added?
View 1 Replies View RelatedI want to have a local user in ACS that is permitted to login to routers. I have TACACS with AD already working but cannot get a local user to work. I used to do this in ACS 4.x.I created a user in the internal identity store.I tried configuring a policy to allow this users TACACS authentication multiple ways to no avail. I cannot find a config example doc and cannot figure it out from the user guide as the documention is sorely lacking.
View 5 Replies View Relatedon the acs 5.2 , how to delete specific log for user X, ?
View 3 Replies View Related So we have this problem that just started, I can replicate the issue as well, if a user makes a mistake on typing there password after 1 attempt ACS sends 3 to AD locking out the user.
In a putty or secureCRT session after 1 password failed attempt, I am unable to retry with that same session.
The issue seems to be that after 1 bad password attempt, from the client side I am unable to get another try.
We are using ACS 4.2.1.15 with patch 8 on ACS 1113 SE box.
Our requirement is to assign ACS loal group to user on basis of windows Nt group. Which means I dont wants to create individual users in ACS rather when user will login, the auth request will be forwarded to AD(remote database). Depeneding on the remote database group the user should be mapped to local database.
For this I have configured "database group mapping" according to following cisco guide. [URL]
However when ever my AD users are authenticating they are getting the membership of default group as configured in "Default" profile. I am using TACACS+ protocol in my routers and switches for authentication.
whether "Group mapping by External user database" works with TACACS+ or only with RADIUS protocol. If it works with TACACS+ what else configuration need to be done so that my ACS can map users to proper groups instead of default group.
I am trying to setup up a rule to allow wireless access only to users in my AD when they use computers from my AD.I have Machine authentication working on it's own (computer boots up and connects to wireless - confrimed by ACS logs) I have User authentication working But when I try to creat the floowing rule:it does not work.
Access Policy
Access Service:
Default Network Access Identity Store:
AD1
Authorization Profiles:
DenyAccess
Exception Authorization Profiles:
Active Directory Domain:
[code]....
Everything seem to fine until it gets to the last rule.
I use ACS appliance 1120 for cisco devices administration. The identity store is external. I use Active directory. Actually, Authentication, authorization and accounting work well but users can not change theirs Active directory password when they have expired. Do you now how to configure ACS to permit password changing?
View 5 Replies View Relatedwe have created some administration accounts which should only have the possibility to work on the user database. the useradmin role is to limited to create a user and set a fixed password only, but not able to enable the users authentication against a predefined external identity store. Other roles which makes this possible are far to powerful for a second level adminstrator.The adminstrator should have the possibility the create an user and set the password check against an external database. This is not possible with the predefine role "UserAdmin". Other roles do have to many rights for these users.
View 4 Replies View RelatedUser connects through a sonicwall device via SSL VPN and gets a static IP every time, despite what device they come from.
1. LDAP somehow supplies the IP from a DHCP server behind the sonicwall
2. The sonicwall somehow supplies the static IP on the interface that the net extender is connected to.
I am having an issue with connecting to the internet on my laptop. I have never had this problem before and after google-ing it, it appears that a lot of other people have the same issue. I had a message pop up that said something along the lines of 'another user on your network has the same ip address as your computer.' I lsot my connection, but was then able to re-connect. However, now I am permanently disconnected from the internet. I have reset my wireless adapter and that hasn't worked. I'm currently using my mum's computer and her internet is working fine.
View 17 Replies View RelatedMigrating from 4.2 to 5.2 acs and have noticed there is no expiration date per internal user added. We expire users at different times due to their time on site. Is there something that has to be added to get back this basic feature we had before?
View 6 Replies View RelatedI am trying to create a user restriction to allow one user to access only two networks (10.192.3.0 and 10.192.5.0) I have range of networks but I want to permit only two networks for limited user and full access for the admins. I know this was possible with ACS 3.3 but I am not too sure if this is also applicable with ACS 5.2.
View 1 Replies View RelatedCan use ACS 5.2 as Guest user authentication server?
View 3 Replies View RelatedI am using ISE 1.1.3.124.My first question:I want to know the relation between the attribute "WasMachineAuthenticated" and the MAR (MAchine access restriction in advanced setting for AD).Is-it the same or not ?Once you time out, you need to do machine auth again. What is the timer ?Using the attribute "WasMachineAuthenticated", is-it the same timer that you configure in MAR ? In a distributed environnement, is the information about machine previously authenticated replicated to all policy node ?Because, if a swicth has 2 radius-server, we are not sure that it will point everytime to the same server.
View 1 Replies View Relatedhow I can assign a static IP to a user in ACS 5.2. I am able to do it in ACS 4.2, but I don't see the same options under 5.2. General idea is that users authenticate from our VPN appliance via RADIUS, and upon authentication, their static IP is passed back to the VPN device. I can attach an arbitrary field to my local users by going to System Administration -> Configuration -> Dictionaries -> Identity -> Internal Users, but how do I get that IP address passed back when the user is authenticated via Radius?
View 1 Replies View RelatedI have an ACS 5.2 server integrated with Active directory . Now i need to create an internal user account to login to some radisu devices using internal user database .I have near about 600 users all are authenticating through AD .
View 3 Replies View Related