Cisco :: CiscoWorks LMS 4.0.1 - Could Not Generate The Report
Sep 26, 2011
I am running CiscoWorks LMS 4.0.1 since 6 months and I wanted to generate today a report about the interface utilization on 2 Cisco switches (Catalyst 3750G). The corresponding job is created, it runs and then i get "succeeded with info" in the "Run Status" column. When I want to click then on the "View Report" link, I get the following error: "Could not generate the report. Either data is not available for the specified duration or the report job failed."
I tried the same procedure with 2 other switches but I have got the same result.
View 1 Replies
ADVERTISEMENT
May 17, 2011
I have an issue with rme 4.2 from LMS 3.1 When I try to generate a syslog report this shows me nothing. I locate SyslogCollector.log file and I see sometnig wrong.
View 4 Replies
View Related
Dec 12, 2011
I am unable to generate bug summary report in RME. Even I can not generate PSIRT report as well..LMS always gives error "incorrect cisco.com credential. enter correct credential" I have checked my credentials are correct... it gives me error no BTKT:0014..I am using LMS 3.1 attaaching snap shot of my patch level and application version running on LMS...
View 3 Replies
View Related
Dec 5, 2012
How to generate a Report for all ur existence Subnet's using LMS 4.2?
View 2 Replies
View Related
Dec 19, 2012
My cisco works LMS3.2 is not showing recent configuration of my Cisco devices. also it dont show any change report on last 24 hours or even if i select x number of day, looks like its not saving any changes made on devices.
today i logged in and cisco ASA was showing this in status as well Configuration Last Archived Time May 03 2012 11:27:46 EDT on checking i could see it is same date when cisco ASA was added in cisco works. do i need to click some where for auto update configuration changes and latest confoguration in cisco works setting?
View 1 Replies
View Related
Dec 11, 2012
We are already having a True business ID certificate from Geotrust for our SSL VPN on CISCO ASA 5510.this is working fine.
We are now changing our device from ASA 5510 to ASA5520 in failover setup. As we check with Geotrust they are asking us to create a new CSR with same parameters from new ASA5520 device and reissue the certificate from their site.In this context how to create a new CSR from ASA5520 8.2(5). create CSR from ASA 5520 8.2(5)
View 2 Replies
View Related
Jan 18, 2013
I'm playing with ipv6 and trying to get a tunnel between two sites working (basically following this example url...
View 6 Replies
View Related
Mar 8, 2011
we have a policy on ACS to disable user account (Internal user identify store) after X days if password is not changed. However, a few days before the password expires, there is no notification for users unless he happens to log in IOS router (tacacs) through console. in other words, if he logs into IOS devices through VTY, there is no notification at all.some users got locked out becuase they were not notified to change password. What setting on ACS 5.2 must be configured to display warning on VTY before password expires?
View 2 Replies
View Related
Dec 8, 2010
I have configured an Cisco 881 router in our lab with netflow commands and pointed to our network monitoring tool and I want to check if the tool can collect valid traffic statistics from this router (eg. utilization). The problem this router has nothing plugged into a production LAN that would potentially generate traffic to measure using this tool.
Is there a way to configure a Cisco router (ex. Cisco 881 router) to artificially generate network traffic to test that I have setup the monitoring tool correct to capture future utilization statistics?
View 1 Replies
View Related
Feb 10, 2013
ASA5510, Can't generate RSA keys, so can't SSH. [code]
View 2 Replies
View Related
Apr 14, 2011
I have a WCS server running the version 6.0.170.0. I have already added few WLCs running the version 7.0 to this WCS. It is working fine. And now I have added two new controllers running the version 7.0.98.0 to the existing WCS server. When i add the floor layouts to the WCS and position the access points from the new controllers, the heat map is not generated automatically.
View 2 Replies
View Related
Feb 27, 2012
do we have anything like universal password for cracking through wireless connection?
View 3 Replies
View Related
Dec 9, 2011
Basically i need to test to see where the telephone lines are terminated, because when they where built into the walls the used standard cat5e cable to terminate it to an RJ-11 jack but over in the wiring panel it (i assume it is anyways) terminates to an RJ-45 jack but im not sure if this is really the cable for the telephone or something else, so i have a phone connected to the wall jack and a computer on this end and i would like to send a dial tone or any tone in general that the phone can pickup.
View 3 Replies
View Related
Mar 15, 2012
I have a TP-Link Wireless Router (TL-WR340G) and I use it for both Wired and Wireless connection. I have two desktops that connects to the router through cables and I also have 2 notebooks that connects through WiFi.
Now, I want to know if there is any software that can generate passwords which I can assign into individual PCs that connects with Wifi. For example, Notebook #1 has the password "abcdefghij" and the Notebook #2 has the password "1234567890" and they can both connect to the WLAN.
View 2 Replies
View Related
Nov 23, 2011
We got a replacement ASA 5580 from Cisco. We were not aware of PAK, Is there any other possible to generate Activation key? Can we generate PAK or Activation Key using SO (service order) number?
View 1 Replies
View Related
May 19, 2010
I want to use IP SLA to perform simple up/down monitoring of an IP host and to generate a syslog alert if the host goes down. I have a 2650XM router running 12.4(23) IP Voice IOS. My basic IP SLA config is hown below:
ip sla monitor 10
type echo protocol ipIcmpEcho 10.55.1.1
timeout 1000
frequency 10
ip sla monitor schedule 10 life forever start-time now.
View 7 Replies
View Related
Oct 30, 2012
I want to clear the keys on a 2821 and generate new ones using the command crypto key zeroize command but I don't see this command available as an option. Below is the output of the available options..
ROUTER#crypto key ?
lock Lock a keypair.
unlock Unlock a keypair.
[Code]....
View 1 Replies
View Related
May 19, 2013
I'm supporting a 2504 wireless controller with 3 aps in a health clinic. I'm interested in generating some useful information for the owners of the device such as radio utilization (It'd be really nice if there were some graphs). how I can generate these graphs without SNMP monitoring or something like Cisco Prime Infrastructure?
View 4 Replies
View Related
Oct 10, 2011
I can't seem to find out how I can generate a PCF file for a new remote vpn SW client? I have a VPN Concentrator 3000 series.
View 1 Replies
View Related
Aug 31, 2011
Is it possible to generate a public RSA key of 4096-bits on an IOS router? We are running 12.4(24)T5. Have been going through some cisco doc and found this:
Cisco IOS 4096-Bit Public Key Support in IOS 12.4(11) and later.
However when I issue the command,crypto ca trustpoint exampleCAkeys, rsakeypair exampleCAkeys ?
it only shows me the maximum of 2048. Am I missing something? Currently our root cert has a public key of 2048 and the routers a key of 1024. The goal is to increase the root cert and our routers cert to 4096-bits. If that's possible.
View 6 Replies
View Related
Jul 13, 2011
At present we are using the Ciscoworks LMS bunde 3.0. I would like to upgrade to LMS 3.1.
My Question: Is it possible to upgrade to LMS 3.1 with using the existing LMS 3.0 license.
View 2 Replies
View Related
Jun 13, 2013
How to Generate a CSR File to Renew out SSL Certificate on ASA5510 v9.0(2) - ASDM v 7.1(2) ?
View 1 Replies
View Related
Sep 28, 2011
I need:
cisco 2811 IOS CA as server
cisco vpn client + etoken (aladdin) as client
certificate enrollment from cisco vpn client and vpn connection with it works at present, but I don't know how to use etoken with it, how to write the client's cert. to a token.i used this doc:Configuring IPSec Between Cisco IOS Routers and Cisco VPN Client Using Entrust Certificates[URL]in chapter "Certificate Enrollment for the Cisco VPN Client", in section 3 there is a screenshot with an example of a certificate enrollment, where the specified name (CN) as vpnclient, but in section 5 "view the certificate ", common name specified as Joe Smith, etc.where this client's data is obtained? it's not clear to me... how to generate and write a client's certificate on etoken, who uses cisco vpn client with it for connect to server?
View 1 Replies
View Related
Mar 13, 2012
I just find there is no "Crypto key generate" command line in my Catalyst4506-E with cat4500e-universal.SPA.03.01.01.SG.150-1.XO1.bin image. Is there any other command I can use to enable ssh access? this command is always able to use on other catalyst switch like 3750X.
View 4 Replies
View Related
Oct 3, 2012
I have a pair of ACS appliances running 5.1 code. The appliances are set up as a replicated pair. I have valid local and trusted certificate authority certificates on the primary.
The trusted certificate authority certificate gets replicated to the secondary. Obviously the local certificate doesn't get replicated. I need to generate a certificate signing request on the secondary but it doesn't seem to allow you to do it.
View 1 Replies
View Related
Dec 19, 2012
Right now the Self-signed Certificate on my RV180W generates errors as it was issued to the MAC address instead of the current IP address. Need instructions on Generating a Self-Signed certificate (or 1 from my Windows Server 2012 Certification Authority) that will eliminate the constant barreage of certificate errors I get when trying to access the management interface of my device? the internal domain is mythos.local, netbios name of MYTHOS, and the device name in question is surtur.
View 2 Replies
View Related
Jul 4, 2012
I faced with strange behavior of Cisco 2901.I strat ospf process on router, do some ospf manipulations and than turn off ospf with
R1(config)#no router ospf 1
But after that when I start to change my config: shut/no shut interfaces I see OSPF debug messages
R1(config-fr-dlci)#interface Serial0/0/0.5 point-to-point
R1(config-subif)#sh
R1(config-subif)#
Jul 5 12:33:13.004: OSPF EVENT Se0/0/0.5: Route adjust
R1(config-subif)#
R1(config-subif)#
R1#sh
Jul 5 12:34:15.076: %SYS-5-CONFIG_I: Configured from console by consoleip pro
R1#sh ip protocols
*** IP Routing is NSF aware ***
How it can be? Thereis no OPSF process on R1.
View 6 Replies
View Related
Dec 16, 2010
As of late, I've been pretty unsatisfied with my WRT54GV6 with DD-WRT. It just can't handle the amount of traffic that my network generates now. I was considering building an Untangle or pfsense box and wanted to know if drivers or performance were an issue.
Foxconn R20-D2 Intel Atom D510 Intel NM10 Intel GMA 3150 Barebone
PQI POWER Series 2GB 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Desktop Memory Model MAD42GUOE
Intel Pro/1000 MT Dual Port Server Adapter Gigabit NIC
View 19 Replies
View Related
Aug 31, 2011
There was a interface down in one of critical devices in the network.that particular log is not captured by the ciscoworks(DFM-alerts).
View 1 Replies
View Related
Oct 24, 2012
I am trying to get CiscoWorks LMS 4.0 to connect to my routers in order to back up configurations, but I am getting SSH authentication failures reported in the router logs (and archiving fails).
The credentials LMS is using is a username and password with priviledge 15: the account is established in TACACS+. I can log into the devices directly with this user account.However, I cannot TFTP from the routers to the LMS either (I get a permission denied message in the router).
LMS did manage to fetch some configs, but 90% of my devices are having this issue.
View 4 Replies
View Related
Sep 11, 2011
I need download LMS 4.0 eval trial. But i can't see any link down on url...
View 1 Replies
View Related
Oct 23, 2011
I upgraded the LMS 4.0 with LMS 4.0.1 but now the events are removed of Fault View. The equipments than I am monitoring are: ME-3600, ME-3800 and ASR 9000. This is a configuration problem or I have to update something else?
View 1 Replies
View Related
Jul 10, 2011
I have upgraded our LMS 3.x to the new LMS 4.x Version. have installed the new 4.x on an new server and importet the backup.
I have importet a Certificate and have enabled the Browser-Server Security Mode, Enabled I added some new Netshow Jobs which run every day.
I get the email from the jobs and the URL in the email but, URL
When i click on the link i only get:
Forbidden: You don't have permission to access /rme/NSViewJobResults.do on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
i must change the link to Urls there anywhere an option to edit the text which is send with the jobs, to fix the url?
View 4 Replies
View Related