WRT54GV6 With DD-WRT / Can't Handle Amount Of Traffic That Network Generate
Dec 16, 2010
As of late, I've been pretty unsatisfied with my WRT54GV6 with DD-WRT. It just can't handle the amount of traffic that my network generates now. I was considering building an Untangle or pfsense box and wanted to know if drivers or performance were an issue.
Foxconn R20-D2 Intel Atom D510 Intel NM10 Intel GMA 3150 Barebone
PQI POWER Series 2GB 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Desktop Memory Model MAD42GUOE
Intel Pro/1000 MT Dual Port Server Adapter Gigabit NIC
View 19 Replies
ADVERTISEMENT
May 12, 2011
So a BT home hub is a very cheap router, so it seems. And - if you connect a quite a lot of eq to this router, it starts crashing. "It can't handle the traffic.". But what does that mean? Why can it handle the traffic for a while and after a few days it can't anymore. And lets say - some of the eq doesn't really work on the external network, it works on the internal network, and it doesn't need the internet to work for proper functionality. So - what is important then? Which specifications are the important ones?
View 2 Replies
View Related
Apr 17, 2013
I would like to measure amount of data I have uploaded and downloaded on the internet since last router reboot. I see there is a STATISTICS under STATUS, which lists the packets, but how big is a packet? And can I just take the values under Receive and Transmit (row called Internet) and multiply with packet size?
View 1 Replies
View Related
Dec 8, 2010
I have configured an Cisco 881 router in our lab with netflow commands and pointed to our network monitoring tool and I want to check if the tool can collect valid traffic statistics from this router (eg. utilization). The problem this router has nothing plugged into a production LAN that would potentially generate traffic to measure using this tool.
Is there a way to configure a Cisco router (ex. Cisco 881 router) to artificially generate network traffic to test that I have setup the monitoring tool correct to capture future utilization statistics?
View 1 Replies
View Related
May 30, 2012
We want to get L2 traffic amount (bit/byte) passing through a cisco switch (6500/3560 ...) for a specific VLAN. it can be via SNMP or CLI ...How can we do that?
note: there is no L3 interface on swtiches.
View 2 Replies
View Related
Feb 12, 2011
I can't connect to the public weater site NOAA.gov, and weather.gov, but have no problem connecting to any other sites, private of public.WRT54Gv6 wireless with v1.02.08 (Oct 5, 2009) firmware..the latest.3 devices, desktop, laptop, and iPad......none of which can connect to NOAA or weather.gov Government websites are up when I tried to connect.I've connected to these sites for years, and as recently as yesterday.Linksys BEFCMU10 cable modem. This blows my mind, since the 3 device all have different OS's, browsers, AV software. The only thing in common in the network is the modem and wireless router. Why only the two .gov sites cannot connect?
View 9 Replies
View Related
Mar 9, 2011
I have a bandwidth-intensive video conferencing device connected to a router. I have forwarded all the necessary ports to the device (and I have even tried DMZ) but the device is unable to connect to some servers due to "NAT issues". The device uses lots of ports simultaneously to connect and I am wondering maybe possibly the router can not handle the number of open ports. The ISP only blocks port 25 which the device does not use. Could it be that the ISP limits the number of ports that are in use? Or maybe the ISP limits the amount of bandwidth that can pass through certain ports?
View 4 Replies
View Related
Sep 30, 2012
is this network able to handle wifi 200 clients?Load balancing QNO FQR7110[URL]Access point: TP-LINK 300Mbps Wireless N Range Extender (TL-WA830RE)[URL].My client is all students... and all of them will connect to the internet by using Wireless connection.So i estimate 12APs for them.. each access point will have around 17 clients...and the 6 APs will be connect to 1 HP 1910 Switch Series 8 ports switch...*Note: the switch is Smart managed switch, but im not going to setup it.. i will just plug and play..May i know it is suitable to use that model of device to setup the network with 200 clients?The load balancer and switch it is enough Processor and RAM?
View 2 Replies
View Related
May 13, 2013
I just bought a DCS-2130 for outdoor use (city landscape through my window in the nineteenth floor), and I'm trying to get it work during the daylight, but I'm having some problems.It seems like this camera can't handle direct sunlight, and in these situations the image gets blurry, even when I set the exposure to auto with max of 0dB in setup menu. Simply there's nothing I can do in this options menu to solve this problem.As the day passes by (and the sunlight gets weaker), the image gets better 'til the night, when it's perfect.What I need to know is if there is any way to setup it properly for daylight use. Is there possible to setup these exposure parameteres some other way, like editing an .ini file or something like that? Or this expensive camera simply can't handle this?
View 7 Replies
View Related
Jan 24, 2012
I plan on starting a high speed LAN for my Gaming LAN party's. We send 100's of GB of data over our LAN networking when we do this, so i need a good switch that can handle the stress of the massive data transfers. It needs to be a gigabit switch and at least 8 RJ45 ports.or is there a different one i should get all together? i cant spend a butt load. url...
View 3 Replies
View Related
Feb 6, 2013
Recently I bought a new router and it works great but I'm still having bandwidth issues. On average there are 6 devices running at once, but only two of which do anything that takes up a significant amount of bandwidth and the router is a good distance away from my computer and my brothers (we do online computer gaming). Is there any way to increase the amount of bandwidth we get up here with out having to move the modem and router?
View 1 Replies
View Related
Mar 28, 2011
I currently have a 20mb connection with sky. I have 4 computers in my household and using the wireless modem router to distribute the connection.can I limit each computer to a certain amount of bandwidth. (eg PC1 =5mb, PC2=5mb, PC3=5mb, PC4=5mb) Two of my computers are running Win Vista HP and two computers are running Win 7 Pro & Ultimate.
View 1 Replies
View Related
Mar 8, 2011
I am really not sure how to ask this question, but I will do my best. I have a Server running an application that I am connecting to via VNC app on my client. The app on the server is pushing 90mb down to the client, which is incredibly slow (3fps). I am curious if there is something that I can do/configure/verify to reduce the amount of data being pushed down?
View 9 Replies
View Related
Nov 5, 2012
how to limit amount of data usage on pc in a particular network
View 4 Replies
View Related
Mar 16, 2011
Does anybody know how to control the enormous amount of spam that you recieve.
View 2 Replies
View Related
Feb 27, 2012
Is there a way to limit the amount of data sent to a network printer? We have users trying to print a 2 GB documents and it causes issue on the print server?
View 2 Replies
View Related
Apr 11, 2011
the max amount of AP's one 5508 WLC can support ?
View 4 Replies
View Related
Feb 15, 2012
i back up my very important server 2008 r2 data over a vpn to another computerall together its just under 5GB...it used to take 5 to 7 hoursnow the same data is taking 14 to 24hours...why would this be?im using netgear vfs338 vpn firewalls at each end
View 12 Replies
View Related
Sep 10, 2012
So lately this week, one rogue user from the boarding house has been downloading(possibly torrenting)/streaming to his/her heart's content resulting in extremely slow connections for everyone else. I've been using an Android app to list all devices connected to the network, and one-by-one, manually disconnected each one to find the problematic, bandwidth-hogging IP. I've found that said user continued to use up bandwidth even up to the wee hours of the morning.
I managed to find his/her IP address, I know I could just block sites/ports via the router's control panel but I guess it's not that simple because: a.) Whoever setup the wireless on our floor forgot the username/password combo(not even the landlady knows) b.) I've asked management about asking for access to the router. Being the IT student on the floor, I guess I'll take the responsibility of at least limiting the rogue user's bandwidth so everyone else on our floor has a fair share.
So my question is: is there a way to limit an IP/application's bandwidth usage via a non-router control panel method, without having to do a hard reset on the router? I have tried in vain to use the Android app I used, but all it takes is a router reboot to disable it (said user knows how to reset the router). It's been days since we've had a stable connection for legitimate schoolwork usage because of this one IP that's using up all the resources.
The router on our floor is a Linksys WRT54G2 and my operating system is Windows 7 64-bit.
View 1 Replies
View Related
Oct 15, 2012
I have set up 2 RV110w firewall/vpn/routers at remote locations and an ipsec tunnel between them. Once the tunnel gets established everything works fine until it has been idle for some arbitrary amount of time. (Maybe a half hour or less.) at which point we lose server access and can no longer ping across the tunnel. To fix this I have had to dissconnect and reopen the tunnel again, I even went so far as to install an autopinger on the remote end to keep traffic on the tunnel which seems to work but is not going to be a viable long term solution.
View 2 Replies
View Related
Feb 19, 2012
I am trying to find a way using CLI that I can identify the amperage being used by a 6509 chassis. I have looked through all of the sh power and sh env commands and seem to only find the power being used on the DC side (since the output referemces 42V). Ddint know if there was something I was overlooking. To each things from the AC side will take getting an electrician in which is what I was hoping not to have to do.
View 4 Replies
View Related
Mar 17, 2012
working config with least amount of code for:
IOS post 8.3
Subnet: 192.168.1.0 /24
Static NAT (from any source) to server 192.168.1.100 and allow the same incoming connections on outside interface
Ports:
TCP 20,21
TCP 80
UDP 50000-50020
View 1 Replies
View Related
Dec 11, 2012
We are already having a True business ID certificate from Geotrust for our SSL VPN on CISCO ASA 5510.this is working fine.
We are now changing our device from ASA 5510 to ASA5520 in failover setup. As we check with Geotrust they are asking us to create a new CSR with same parameters from new ASA5520 device and reissue the certificate from their site.In this context how to create a new CSR from ASA5520 8.2(5). create CSR from ASA 5520 8.2(5)
View 2 Replies
View Related
Jan 12, 2012
I have an 1841 and started to run into an issue which can be resolved but looking to see what you guys prefer to do in this situation. We allow users to connect the laptop via ethernet and wireless to our network at the same time as well as an iPad or any other wireless technology. With that said, for the most part each user has two IP's at any given point. The issue comes in is that I have a large amount of IP exclusions for servers, printers, switches, etc on the exclude list. I am starting to see that the 255 address are not enough to make a long story short. I am also using the 1841 to handle another range for the voice network, which has no isues. What is the best way to fix this issue? Can I run a virtual VLAN off that 1841 for everyone to use and then have the servers, switches, printers, etc on another one? I want to assume no, as both interfaces are used on the back of the 1841 for the two VLANS running now. Or is the only way to handle this with this device to say that as a policy you can only connect assigned company hardware to the network?
View 3 Replies
View Related
Sep 3, 2012
I have a 5K with 5 downstream 3560's. I now have a new 5k that I would like to add to the existing 5K as a HA peer. What is the best way to accomplish this with the least amount of downtime for the downstream switches.On the 3560's, i plan setting up port-channels once HA is setup on the 5k's.
View 1 Replies
View Related
Sep 22, 2011
I am trying to find out what the maximum amount of HSRP/Standby groups a Cisco 3945 will support. I found this link that I think says 256 URL.
View 6 Replies
View Related
May 18, 2011
I have 1812j with ISDN line.Recently Accidentaly the ISDN Router was dialing every 1 minute because of the config was not right.It was too late to find out.And I got the expensive bill from the telephone company.
The idea is I want to stop dialing if the dialing cost is over than appropriate amount.For example, if dialing cost reach to $200, then stop dialing and alert to the system administator by E-mail or something.There is the way to limit the timed-out but this won't work for that.
View 3 Replies
View Related
Feb 27, 2012
do we have anything like universal password for cracking through wireless connection?
View 3 Replies
View Related
Dec 9, 2011
Basically i need to test to see where the telephone lines are terminated, because when they where built into the walls the used standard cat5e cable to terminate it to an RJ-11 jack but over in the wiring panel it (i assume it is anyways) terminates to an RJ-45 jack but im not sure if this is really the cable for the telephone or something else, so i have a phone connected to the wall jack and a computer on this end and i would like to send a dial tone or any tone in general that the phone can pickup.
View 3 Replies
View Related
May 17, 2011
I have an issue with rme 4.2 from LMS 3.1 When I try to generate a syslog report this shows me nothing. I locate SyslogCollector.log file and I see sometnig wrong.
View 4 Replies
View Related
Sep 26, 2011
I am running CiscoWorks LMS 4.0.1 since 6 months and I wanted to generate today a report about the interface utilization on 2 Cisco switches (Catalyst 3750G). The corresponding job is created, it runs and then i get "succeeded with info" in the "Run Status" column. When I want to click then on the "View Report" link, I get the following error: "Could not generate the report. Either data is not available for the specified duration or the report job failed."
I tried the same procedure with 2 other switches but I have got the same result.
View 1 Replies
View Related
Mar 15, 2012
I have a TP-Link Wireless Router (TL-WR340G) and I use it for both Wired and Wireless connection. I have two desktops that connects to the router through cables and I also have 2 notebooks that connects through WiFi.
Now, I want to know if there is any software that can generate passwords which I can assign into individual PCs that connects with Wifi. For example, Notebook #1 has the password "abcdefghij" and the Notebook #2 has the password "1234567890" and they can both connect to the WLAN.
View 2 Replies
View Related
Jan 18, 2013
I'm playing with ipv6 and trying to get a tunnel between two sites working (basically following this example url...
View 6 Replies
View Related
