TL-WR340G - Generate Different Passwords For PCs In WLAN

Mar 15, 2012

I have a TP-Link Wireless Router (TL-WR340G) and I use it for both Wired and Wireless connection. I have two desktops that connects to the router through cables and I also have 2 notebooks that connects through WiFi.

Now, I want to know if there is any software that can generate passwords which I can assign into individual PCs that connects with Wifi. For example, Notebook #1 has the password "abcdefghij" and the Notebook #2 has the password "1234567890" and they can both connect to the WLAN.

View 2 Replies

TP-Link WR340G Wireless Router Setup For Home Connection

Apr 7, 2011

How to set up my router just for my home connection.Already did some basic stuff to it but i just want to add more security to avoid unwanted user trying to hog my internet connection......

ISP: Globe Broadband (HUAWEI router)
Wireless router: TP-LINK WR340G

I really want to learn about this stuff and btw everytime i turn on my Routers Firewall (TP-LINK) i lose connection its like blocking the Globe's internet connection to me.

View 5 Replies View Related

How To Get All Passwords And Usernames

Mar 29, 2011

if there was a way in which i could get every username and password associated with my email, sent to my email account. I want to delete some old accounts and stuff but where ive made so many ive forgotten all the passwords and usernames ect?

View 3 Replies View Related

3com - Can't See User Passwords In Configuration?

May 30, 2012

I typed such commands:Code:

View 3 Replies View Related

Protect Information (passwords) While Using A Proxy / VPN?

Aug 4, 2012

At the school I live in various sites are blocked so I need to use a proxy to access them. Is there any way that someone could steal my password or something while I use one? Also, let's say that I use a proxy in one web browser (let's say Opera) to view a blocked site, but then use a different browser (Firefox) with my normal IP, would I be able to use Firefox with no worries if I need to check something like my bank account? Basically, can you restrict them to one program so you can use personal information on one and normal browsing on the other?

View 1 Replies View Related

Wireless Router Keylogger Get Passwords?

Feb 9, 2011

can a wireless router with keylogger get password for myspace or facebook.if someone is loged on my wireless network.like if there using a ipod or compute

View 3 Replies View Related

Changing BIOS Passwords Remotely?

Aug 14, 2012

I'm currently looking for a way to change all of our Laptop & Workstation (Approx 250+ machines) BIOS passwords using a remote tool if possible. The majority of laptops are Latitude and the workstations OptiPlex although most of the laptops have BitLocker activated. We also use Empirum software to push out software.

I have been looking around and into using the Dell Client Configuration Utility and also the OpenManage tool although I'm not too sure if they would work for us due to us using BitLocker.

View 1 Replies View Related

Cisco VPN :: ASA 5540 - Display Passwords

Jul 19, 2011

We have two ASA's 5540, running IOS 8.2(4). Is there a command to find out the password that we setup for VPN Load balancing? I recall there was a command that you type under CLI and it will display all passwords.

View 3 Replies View Related

Cisco Wireless :: Setup A 2504 To Have One Guest WLAN And One Staff WLAN?

Jun 10, 2013

I would like to setup a 2504 to have one Guest WLAN and one Staff WLAN with a controller port for each WLAN connected to different devices.

I would prefer to connect the WLC Guest port to an ASA 5510 and the WLC Staff port to an internal 2960S switch. Will this work? I haven't setup a 2500 series controller previously.

View 4 Replies View Related

Cisco :: Python Script To Change Passwords?

Feb 28, 2012

Found a script on the wiki http:/[url]....I have run it with four commands:

conf t
username admin privilege 15 secret password1
exit
wr mem
exit

However the output file shows me that I have an error:

Command Issued: conf t
Enter configuration commands, one per line. End with CNTL/Z.
Command Issued: username admin privilege 15 secret password1
Line has invalid autocommand "username admin privilege 15 secret password1"
Command Issued: exit
Command Issued: wr mem
Building configuration...
[OK]

I found some sites that talked about "A" script not knowing that it is a new line and tries to send additional chare to the terminal. Obviously not specific to this script.Do I need to escape the end of line with a ' or ' for it to know that it is a new command? I have about 50 Routers and 100 Switches I need to change a password on.

View 15 Replies View Related

Cisco VPN :: Pix 501 Firewall And Have Lost All Login And Passwords

Jan 5, 2012

Is there a way to reset the device and start all over again. The person who set this up is no longer with the companyand did not detail the information. We installed a new t1 line with new IP addresses and need to set this to connectwith our remote location. And I am not knowledgeable at all on how to configure this.

View 1 Replies View Related

Cisco VPN :: To Generate CSR From ASA 5520 8.2(5)

Dec 11, 2012

We are already having a True business ID certificate from Geotrust for our SSL VPN on CISCO ASA 5510.this is working fine.

We are now changing our device from ASA 5510 to ASA5520 in failover setup. As we check with Geotrust they are asking us to create a new CSR with same parameters from new ASA5520 device and reissue the certificate from their site.In this context how to create a new CSR from ASA5520 8.2(5). create CSR from ASA 5520 8.2(5)

View 2 Replies View Related

Cisco 2960 Switch - Encrypting User Passwords?

Nov 8, 2011

We have one Cisco 2960 Catalyst switch.Rule Title: The administrator will ensure passwords are not viewable when displaying the configuration. Right now my user passwords are visible in plaintext. I tried #username <admin> password 7 - but everything I try there is an error I also tried #username <admin> secret but it says I can't have both a secret and password for a single account.

View 1 Replies View Related

Windows 2003 Server Network Login Passwords?

Oct 10, 2012

I want remove saved passwords in 2003 server with which XP clients login

View 1 Replies View Related

Cisco WAN :: 3750 What Is Procedure For Configuring Passwords On Device

Feb 20, 2012

Am setting up Cisco 3750 for the first time via CLI

1. what is the procedure for configuring passwords on the device.

2. how can i stack 3 switches in a site .

View 1 Replies View Related

Cisco Routers :: Modem / Router DCP2325 Passwords

Sep 17, 2012

I recently purchased a new laptop computer and since I already had a wireless router I thought that I could get on line easy but, it seems the password I had written down does not work. I called my cable co. Charter to see if they could correct it. Well Charter changed it to something only God knows. Now neither Charter nor myself can make my laptop access the web without directly plugging into the router. What good is a wireless router that no one knows the password too? How I go about changing a password that I do not know and neither does my ISP.

View 2 Replies View Related

Cisco WAN :: 3560v2 - Configuring Passwords / Creating VLan

Apr 27, 2012

I just procured Cisco 3560V2- 48PS-S i would like to know how to set it up from scratch:

1. configuring passwords: enable and privilege
2. Creat Vlan , such that systems connected to the Vlan can connect to internet.
3. enable routing protocols
4. How do i use the switch as a default gateway for the systems on the vlan
5. how do i make sure the desktops connected to the switch are browsing the internet.

View 3 Replies View Related

Cisco Firewall :: ASA 5545 - Passwords To Allow All Show Commands

Mar 26, 2013

Currently have an ASA 5545. What I want to do is allow our support team to perform ALL show commands (up to and including show run) but not enable them to perform ANY configuration changes on the devices (not get into config t). This is to allow them to check ARP tables, routing protocol status, etc

i don't have access to the ASA at the moment and haven't been able to figure it out in IOS, i'm assuming its not too hard.

View 1 Replies View Related

Cisco :: ACS 5.3 User-based / Custom Enable Passwords?

Mar 23, 2012

I've installed Cisco ACS 5.3. After I created several internal users (defined password and enabled password), Identiy Groups, Access Polices, Network Devices and AAA Clients (e.g. Cisco 1841) for Radius and configured my Router like this:

...
aaa authentication login VTY group radius local-case
aaa authentication enable default group radius enable
....

Now I'm able to login successful using my internal User. But if I try to use enable to enter the enable level I'll receive the message "% Error in authentication." when I use the defined enable password.

In the ACS logging I'll can see that "$enab15$" is missing. If I setup a user name "$enab15" I can login to enable level, but what have I to do, to use the custom enable passwords?

Step 1.2 - 1.5 is requiered for both (Radius and Tacacs). Then you have to switch to 2.1-2.7 for Radius or 3.1 - 3.7 for Tacacs authentication.

View 1 Replies View Related

Generate Password For Wireless Connection?

Feb 27, 2012

do we have anything like universal password for cracking through wireless connection?

View 3 Replies View Related

Generate Dial Tone Over Ethernet NIC?

Dec 9, 2011

Basically i need to test to see where the telephone lines are terminated, because when they where built into the walls the used standard cat5e cable to terminate it to an RJ-11 jack but over in the wiring panel it (i assume it is anyways) terminates to an RJ-45 jack but im not sure if this is really the cable for the telephone or something else, so i have a phone connected to the wall jack and a computer on this end and i would like to send a dial tone or any tone in general that the phone can pickup.

View 3 Replies View Related

Cisco :: LMS 3.1 - RME Cannot Generate Syslog Report

May 17, 2011

I have an issue with rme 4.2 from LMS 3.1 When I try to generate a syslog report this shows me nothing. I locate SyslogCollector.log file and I see sometnig wrong.

View 4 Replies View Related

Cisco :: CiscoWorks LMS 4.0.1 - Could Not Generate The Report

Sep 26, 2011

I am running CiscoWorks LMS 4.0.1 since 6 months and I wanted to generate today a report about the interface utilization on 2 Cisco switches (Catalyst 3750G). The corresponding job is created, it runs and then i get "succeeded with info" in the "Run Status" column. When I want to click then on the "View Report" link, I get the following error: "Could not generate the report. Either data is not available for the specified duration or the report job failed."

I tried the same procedure with 2 other switches but I have got the same result.

View 1 Replies View Related

Saving Passwords For Access To Shared Files On Windows Server 2K3?

Aug 20, 2011

We've recently installed Windows Server 2003 at our small office for data storage, and have set up shared folders in the Win Server 2K3 for access from about a dozen Win XP Pro machines.Upon the first access of these shared folders from a Win XP Pro machine, we're required to enter a User Name & Password for the Win Server 2K3 machine:Is there a work-around for this? Perhaps some method in WinXP Pro to save the username/password? As it stands now, any time one of the WinXP Pro machines gets rebooted, or if the server gets rebooted, users of the Win XP Pro machines have to re-enter the username/password, and I'd like to find if there's away around having to re-enter that info.

View 5 Replies View Related

Linksys Cable / DSL :: X3000 - After Updating To FW 1.0.4 Webpages Can't Accept Passwords

Nov 8, 2012

first connect to configuration page is very slow

Second issue: after updating to FW 1.0.4 any web pages doesn't accept any passwords. I can not login to some sites. After reset to Factory defaults I can not configure router - password for ISP doesnt accepted and saved... so internet doesn't work. After rolling back FW all configuret and works fine

View 2 Replies View Related

Cisco Firewall :: Recover VPN Keys And User Passwords On ASA5505?

Feb 9, 2012

I'm just wondering, is it possible to find out or recover the passwords for users and pre-shared key for tunnel-group? The VPN connection was confiigured on ASA5505 before me, but no login details were left.

View 3 Replies View Related

Cisco Routers :: RV042G Doesn't Support Passwords That Contains Spaces

Jul 6, 2012

I've discovered that the DDNS update client in the RV042G does not support passwords that contains spaces. This is the first router I've run into that didn't like it.

View 1 Replies View Related

Cisco WAN :: 2514 - Clear Passwords And Find Break Sequence?

Oct 28, 2012

I have a 2514 Router that i have tried numerous times to access the break sequence and do a pwd reset, while connected to the console port.. How ever its whopping me good..

[code]....

View 4 Replies View Related

Cisco :: Can't Generate Pre-shared Key For Ipv6 Tunnel

Jan 18, 2013

I'm playing with ipv6 and trying to get a tunnel between two sites working (basically following this example url...

View 6 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 / How To Generate Password Will Soon Expire At VTY

Mar 8, 2011

we have a policy on ACS to disable user account (Internal user identify store) after X days if password is not changed. However, a few days before the password expires, there is no notification for users unless he happens to log in IOS router (tacacs) through console. in other words, if he logs into IOS devices through VTY, there is no notification at all.some users got locked out becuase they were not notified to change password. What setting on ACS 5.2 must be configured to display warning on VTY before password expires?

View 2 Replies View Related

Cisco :: LMS 3.1 Unable To Generate BUG Summary Report In RME

Dec 12, 2011

I am unable to generate bug summary report in RME. Even I can not generate PSIRT report as well..LMS always gives error "incorrect cisco.com credential. enter correct credential" I have checked my credentials are correct... it gives me error no BTKT:0014..I am using LMS 3.1 attaaching snap shot of my patch level and application version running on LMS...

View 3 Replies View Related

Cisco WAN :: 881 - Generate Test Traffic From Router?

Dec 8, 2010

I have configured an Cisco 881 router in our lab with netflow commands and pointed to our network monitoring tool and I want to check if the tool can collect valid traffic statistics from this router (eg. utilization). The problem this router has nothing plugged into a production LAN that would potentially generate traffic to measure using this tool.

Is there a way to configure a Cisco router (ex. Cisco 881 router) to artificially generate network traffic to test that I have setup the monitoring tool correct to capture future utilization statistics?