if there was a way in which i could get every username and password associated with my email, sent to my email account. I want to delete some old accounts and stuff but where ive made so many ive forgotten all the passwords and usernames ect?
View 3 Replies
im having trouble setting up site to site vpn from my 527w to my 877 series and thought it would be much easier to see whats going on the 527 if i could see command line
so ive ssh'd to the 527s ip address but none of the usernames/password combos work that let me in the web gui, what are the logins?
I am working on a new install where the customer is using local RADIUS servers at each of their many campuses (for local dynamic VLAN assignment), while using a single set of controllers at the core of their network. For the record, we have set up a pair of 5508s (v 7.2.103.0) in their central data center with 3602i APs around the various campuses. We are using FlexConnect groups to locally authenticate and switch the users.
Right now, the config is working great as far as authentication and local switching goes. The problem we are experiencing is that none of the authenticated usernames are being passed back to the controller (and ultimately NCS). This makes the tracking and troubleshooting of users difficult. Is there something I am missing here? I can't seem to find any fixes relevant to this issue in the 7.2.110.0 release notes.
I am using 3945E Router as Easy VPN Server, with 15.1 IOS. On router I have bunch on usernames for VPN authentication, I want to restrict Router management access for them(ssh,telnet, http and so on).
View 2 Replies View RelatedI typed such commands:Code:
View 3 Replies View RelatedAt the school I live in various sites are blocked so I need to use a proxy to access them. Is there any way that someone could steal my password or something while I use one? Also, let's say that I use a proxy in one web browser (let's say Opera) to view a blocked site, but then use a different browser (Firefox) with my normal IP, would I be able to use Firefox with no worries if I need to check something like my bank account? Basically, can you restrict them to one program so you can use personal information on one and normal browsing on the other?
View 1 Replies View Relatedcan a wireless router with keylogger get password for myspace or facebook.if someone is loged on my wireless network.like if there using a ipod or compute
View 3 Replies View RelatedI'm currently looking for a way to change all of our Laptop & Workstation (Approx 250+ machines) BIOS passwords using a remote tool if possible. The majority of laptops are Latitude and the workstations OptiPlex although most of the laptops have BitLocker activated. We also use Empirum software to push out software.
I have been looking around and into using the Dell Client Configuration Utility and also the OpenManage tool although I'm not too sure if they would work for us due to us using BitLocker.
We have two ASA's 5540, running IOS 8.2(4). Is there a command to find out the password that we setup for VPN Load balancing? I recall there was a command that you type under CLI and it will display all passwords.
View 3 Replies View RelatedI have a TP-Link Wireless Router (TL-WR340G) and I use it for both Wired and Wireless connection. I have two desktops that connects to the router through cables and I also have 2 notebooks that connects through WiFi.
Now, I want to know if there is any software that can generate passwords which I can assign into individual PCs that connects with Wifi. For example, Notebook #1 has the password "abcdefghij" and the Notebook #2 has the password "1234567890" and they can both connect to the WLAN.
Found a script on the wiki http:/[url]....I have run it with four commands:
conf t
username admin privilege 15 secret password1
exit
wr mem
exit
However the output file shows me that I have an error:
Command Issued: conf t
Enter configuration commands, one per line. End with CNTL/Z.
Command Issued: username admin privilege 15 secret password1
Line has invalid autocommand "username admin privilege 15 secret password1"
Command Issued: exit
Command Issued: wr mem
Building configuration...
[OK]
I found some sites that talked about "A" script not knowing that it is a new line and tries to send additional chare to the terminal. Obviously not specific to this script.Do I need to escape the end of line with a ' or ' for it to know that it is a new command? I have about 50 Routers and 100 Switches I need to change a password on.
Is there a way to reset the device and start all over again. The person who set this up is no longer with the companyand did not detail the information. We installed a new t1 line with new IP addresses and need to set this to connectwith our remote location. And I am not knowledgeable at all on how to configure this.
View 1 Replies View RelatedWe have one Cisco 2960 Catalyst switch.Rule Title: The administrator will ensure passwords are not viewable when displaying the configuration. Right now my user passwords are visible in plaintext. I tried #username <admin> password 7 - but everything I try there is an error I also tried #username <admin> secret but it says I can't have both a secret and password for a single account.
View 1 Replies View RelatedI want remove saved passwords in 2003 server with which XP clients login
View 1 Replies View RelatedAm setting up Cisco 3750 for the first time via CLI
1. what is the procedure for configuring passwords on the device.
2. how can i stack 3 switches in a site .
I recently purchased a new laptop computer and since I already had a wireless router I thought that I could get on line easy but, it seems the password I had written down does not work. I called my cable co. Charter to see if they could correct it. Well Charter changed it to something only God knows. Now neither Charter nor myself can make my laptop access the web without directly plugging into the router. What good is a wireless router that no one knows the password too? How I go about changing a password that I do not know and neither does my ISP.
View 2 Replies View RelatedI just procured Cisco 3560V2- 48PS-S i would like to know how to set it up from scratch:
1. configuring passwords: enable and privilege
2. Creat Vlan , such that systems connected to the Vlan can connect to internet.
3. enable routing protocols
4. How do i use the switch as a default gateway for the systems on the vlan
5. how do i make sure the desktops connected to the switch are browsing the internet.
Currently have an ASA 5545. What I want to do is allow our support team to perform ALL show commands (up to and including show run) but not enable them to perform ANY configuration changes on the devices (not get into config t). This is to allow them to check ARP tables, routing protocol status, etc
i don't have access to the ASA at the moment and haven't been able to figure it out in IOS, i'm assuming its not too hard.
I've installed Cisco ACS 5.3. After I created several internal users (defined password and enabled password), Identiy Groups, Access Polices, Network Devices and AAA Clients (e.g. Cisco 1841) for Radius and configured my Router like this:
...
aaa authentication login VTY group radius local-case
aaa authentication enable default group radius enable
....
Now I'm able to login successful using my internal User. But if I try to use enable to enter the enable level I'll receive the message "% Error in authentication." when I use the defined enable password.
In the ACS logging I'll can see that "$enab15$" is missing. If I setup a user name "$enab15" I can login to enable level, but what have I to do, to use the custom enable passwords?
Step 1.2 - 1.5 is requiered for both (Radius and Tacacs). Then you have to switch to 2.1-2.7 for Radius or 3.1 - 3.7 for Tacacs authentication.
We've recently installed Windows Server 2003 at our small office for data storage, and have set up shared folders in the Win Server 2K3 for access from about a dozen Win XP Pro machines.Upon the first access of these shared folders from a Win XP Pro machine, we're required to enter a User Name & Password for the Win Server 2K3 machine:Is there a work-around for this? Perhaps some method in WinXP Pro to save the username/password? As it stands now, any time one of the WinXP Pro machines gets rebooted, or if the server gets rebooted, users of the Win XP Pro machines have to re-enter the username/password, and I'd like to find if there's away around having to re-enter that info.
View 5 Replies View Relatedfirst connect to configuration page is very slow
Second issue: after updating to FW 1.0.4 any web pages doesn't accept any passwords. I can not login to some sites. After reset to Factory defaults I can not configure router - password for ISP doesnt accepted and saved... so internet doesn't work. After rolling back FW all configuret and works fine
I'm just wondering, is it possible to find out or recover the passwords for users and pre-shared key for tunnel-group? The VPN connection was confiigured on ASA5505 before me, but no login details were left.
View 3 Replies View RelatedI've discovered that the DDNS update client in the RV042G does not support passwords that contains spaces. This is the first router I've run into that didn't like it.
View 1 Replies View RelatedI have a 2514 Router that i have tried numerous times to access the break sequence and do a pwd reset, while connected to the console port.. How ever its whopping me good..
[code]....
How do I get guest passwords for wifi access on my android cell?
View 1 Replies View RelatedI just purchased a E4200 and I have some questions;
1. I have the hardware version 1, and I noticed the hardware version 2 has a newer version of Cisco Connect. Can I use the newer version of Cisco Connect on my E4200 V1?
2. Is there a way to hide passwords in Cisco Connect and in the browser UI for the router?
3. Is there a way to have a separate admin password and wireless password?
I also have a issue, I want the browser web UI to display in english, but it insists on changing it back to my native language from time to time.
