Home Network :: Router Can't Handle Traffic?

May 12, 2011

So a BT home hub is a very cheap router, so it seems. And - if you connect a quite a lot of eq to this router, it starts crashing. "It can't handle the traffic.". But what does that mean? Why can it handle the traffic for a while and after a few days it can't anymore. And lets say - some of the eq doesn't really work on the external network, it works on the internal network, and it doesn't need the internet to work for proper functionality. So - what is important then? Which specifications are the important ones?

View 2 Replies


ADVERTISEMENT

Home Network :: How Many Ports Can An Average Router Handle

Mar 9, 2011

I have a bandwidth-intensive video conferencing device connected to a router. I have forwarded all the necessary ports to the device (and I have even tried DMZ) but the device is unable to connect to some servers due to "NAT issues". The device uses lots of ports simultaneously to connect and I am wondering maybe possibly the router can not handle the number of open ports. The ISP only blocks port 25 which the device does not use. Could it be that the ISP limits the number of ports that are in use? Or maybe the ISP limits the amount of bandwidth that can pass through certain ports?

View 4 Replies View Related

WRT54GV6 With DD-WRT / Can't Handle Amount Of Traffic That Network Generate

Dec 16, 2010

As of late, I've been pretty unsatisfied with my WRT54GV6 with DD-WRT. It just can't handle the amount of traffic that my network generates now. I was considering building an Untangle or pfsense box and wanted to know if drivers or performance were an issue.

Foxconn R20-D2 Intel Atom D510 Intel NM10 Intel GMA 3150 Barebone
PQI POWER Series 2GB 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Desktop Memory Model MAD42GUOE
Intel Pro/1000 MT Dual Port Server Adapter Gigabit NIC

View 19 Replies View Related

Home Network :: Good Switch That Can Handle Stress Of Massive Data Transfers

Jan 24, 2012

I plan on starting a high speed LAN for my Gaming LAN party's. We send 100's of GB of data over our LAN networking when we do this, so i need a good switch that can handle the stress of the massive data transfers. It needs to be a gigabit switch and at least 8 RJ45 ports.or is there a different one i should get all together? i cant spend a butt load. url...

View 3 Replies View Related

Home Network :: How To See Where Traffic Goes

Aug 22, 2012

i have a vpn and want to test the way traffic goes when i connect and disconnect vpn try some stuf, how can i see where my info is transiting , i want to test my vpn reactions to changes ill do.

View 1 Replies View Related

Home Network :: How To Route All Traffic Only Via VPN

Aug 21, 2011

I am using OPEN VPN in order to connect to a Canadian VPN server.I want ALL internet traffic to ONLY use the VPN connection and no traffic shall pass through my local ISP under any circumstance.In the event the VPN disconnects, I DO NOT want any internet traffic automatically sent via my LOCAL ISP connection. Can I simply disable my LAN network adapter in windows AFTER the vpn is connected? (since vpn uses its own TAP adapter?)

View 2 Replies View Related

Logging Network Traffic Of Small Home LAN?

Jun 6, 2011

We have a small download limit every month and keep ramming into only days into our billing period. I am trying to identify the culprit but need to find a way to log the traffic of individual IP address (which are all static) on the network to figure out where all the bandwidth is going. Any (preferably free) application that will allow me to monitor this?

Network Infrastructure:

Modem connected to NetGear N2000 (older model) Router 192.168.0.1
Family Desktop - 0.2 (Ethernet)
My Desktop - 0.3 (Powerline Ethernet)
Brothers Laptop - 0.5 (Wireless)
My PS3 - .0.30 (Wireless)
iPods - (Wireless)

Router only tells me when someone is on and can track total network traffic usage not individual hardware.

View 2 Replies View Related

Home Network :: Traffic Redirection From Port 8080 To 80

Sep 5, 2012

wondering if redirection or conversion port 8080 into port 80 is possible? if so how and what cisco equipment can do that?

View 11 Replies View Related

Routers / Switches :: Is This Network Able To Handle Wifi 200 Clients

Sep 30, 2012

is this network able to handle wifi 200 clients?Load balancing QNO FQR7110[URL]Access point: TP-LINK 300Mbps Wireless N Range Extender (TL-WA830RE)[URL].My client is all students... and all of them will connect to the internet by using Wireless connection.So i estimate 12APs for them.. each access point will have around 17 clients...and the 6 APs will be connect to 1 HP 1910 Switch Series 8 ports switch...*Note: the switch is Smart managed switch, but im not going to setup it.. i will just plug and play..May i know it is suitable to use that model of device to setup the network with 200 clients?The load balancer and switch it is enough Processor and RAM?

View 2 Replies View Related

D-Link DCS Network Camera :: 2130 Can't Handle Direct Sunlight?

May 13, 2013

I just bought a DCS-2130 for outdoor use (city landscape through my window in the nineteenth floor), and I'm trying to get it work during the daylight, but I'm having some problems.It seems like this camera can't handle direct sunlight, and in these situations the image gets blurry, even when I set the exposure to auto with max of 0dB in setup menu. Simply there's nothing I can do in this options menu to solve this problem.As the day passes by (and the sunlight gets weaker), the image gets better 'til the night, when it's perfect.What I need to know is if there is any way to setup it properly for daylight use. Is there possible to setup these exposure parameteres some other way, like editing an .ini file or something like that? Or this expensive camera simply can't handle this?

View 7 Replies View Related

Cisco VPN :: Does The 867w ISR Router Handle BGP

Aug 3, 2011

I am trying to set up a VPN between my Cisco 867w device and the Amazon EC2 VPC solution. Amazon have stated that the Cisco ISR routers of IOS 12.4t and above should work, but when trying to input the config generated form the Amazon system into the router, the BGP config lines are not recognised. Does this router support BGP?

View 3 Replies View Related

How Many Devices Can Century Link Router Handle

Nov 19, 2012

How many devices can my century link modem/router handle? i have 2 iphone 4s's a Mac and 2 ps3's is this to much for it? i have a desktop pc that stays wired in.

View 4 Replies View Related

Wireless :: TPLink WR1043ND Router - Can't Handle More Than 22 Users

Sep 12, 2011

I have router TP-link WR1043ND which cant handle more than 22 users?

View 4 Replies View Related

Home Network :: Advanced Home Network Setup (3 Subnets) And Port Forwarding?

Feb 24, 2013

I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:

- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface

Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.

- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.

- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.

Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.

Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)

Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).

View 5 Replies View Related

Linksys Wireless Router :: WAG120N - Handle 20 Connections With Large Coverage

Nov 20, 2012

we are currently using a modem router LINKSYS WAG120N Wireless-N ADSL Router but are not satisfied. lots of dead zones and I think that there are too many users for this AP. last count gave around 20 users. so I'm looking for a solution to be able to handle 20+ concurrent connections and with large coverage - 600 m² .

View 7 Replies View Related

Linksys Wireless Router :: WRT54G Can't Handle High Internet Speed

Apr 16, 2013

I have the WRT54G v2.2 router. I have Comcast internet service. Comcast has just increased their internet download speed to 50Mbps. With a wired computer (not wireless), connected directly to the router, the fastest internet download speed I get is 30Mbps. When I called Comcast's technical support, they are telling me I need a new router as the older routers can't handle these high internet speeds.

View 2 Replies View Related

Linksys Wireless Router :: EA3500 - Printer Cannot Handle 5ghz Band

May 5, 2013

Just upgraded to the EA3500 router and realized my wireless printer can not handle the 5ghz band.If I have the pc on the 5 ghz and the printer on the 2.4 they won't communicate correct?

View 2 Replies View Related

Linksys Wireless Router :: WRT54GL - Handle Far Distance With Fast Speeds And Stability?

Aug 24, 2012

I have a client family who will be moving into a big one floor (but on a giant slope hill as if it had two floors) house. About 88 feet seems to be the longest distance from a small room with the new cable modem. This is based on Google Maps' aerial shot: [URL] Longest Distance FromACableModemRoom.jpg (right side/east is a huge hill with trees).Will an old wireless Linksys WRT54GL router be able to handle this far distance with fast speeds and stability? If not, then which wireless routers can do it? It would be nice to have third party firmware options like Linksys WRT54GL routers. Also, fast speed like gigabits for fast local file transfers between computers in the big house! 100mb/sec is slow these days! Stability and support are important too. The routers doesn't need to be the latest too

View 9 Replies View Related

Cisco Routers :: How Many IP Address DHCP Server Can Handle Of RV0xx Series VPN Router

Sep 6, 2011

How many IP address can handle the DHCP server of the RV0xx Series VPN router? can be configured for more than 250 ip addresses? it is posible to configure the router in order to have more than 250 ip address?

View 2 Replies View Related

Home Network :: Need To Extend Reach Of Wifi Network At Home

Oct 20, 2011

Here's the layout: Cable modem in the basement. Several devices in which I'd prefer a wired connection in the basement. Upstairs on the 1st and 2nd floor of the house are many devices in which wifi is fine or preferred.Here's the problem: As you might guess, wifi is weak upstairs and certainly on the patio and 2nd floor. I have an access point upstairs that I've experimented with but it is flaky.

View 1 Replies View Related

Home Network :: Install A Wireless Network In Home Environment?

Nov 10, 2011

How to install a wireless network in home environment?

View 6 Replies View Related

Home Network :: Need Input On Network At Home Newly Wired

Jan 14, 2012

I am a new student in networking, taking the CCNA courses, and now want to rewire my home. I currently have a cable modem and E2500 setup running my network. I want to get the modem and router out of my computer room and in the basement where the cable enters the house. I want to do this to clean up the computer room wiring a bit and to run line drops to different rooms in the house where the internet will be utilized.Currently there are two PC's, a laptop, a tablet, sometimes a phone, and an XBOX using the internet. I want to get my printer back up and running on the network but thats another story. Only one PC is currently hardwired. I would like to run two cables into the room with the PC and XBOX that are currently using wireless, at least two into the computer room for the PC and network printer, and one or two into the living room for the blue ray player and possibly an internet tv.

View 1 Replies View Related

Home Network :: Can't Get D-Link DGL-4500 To Accept Home Network?

Sep 10, 2011

I have a D-Link DGL-4500 router and my landlord recently ungraded our internet connection. However, now I get this error message when I try to hook it up to the ethernet hub,"The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem."

View 3 Replies View Related

Security / Firewalls :: Allow Traffic Through Computer On Home LAN Running ZA

May 18, 2012

I am trying to reconfigure my Boblite modem router to allow basically all traffic through to my computer on my home lan which is running ZA so I can see what intrusion attempts whether directly or indirectly are being made on my connection.I am not having much luck at the moment, have tried turning off the firewall within the router all together and also setting up a dmz for my computer.

View 1 Replies View Related

Home Network :: Playing MPEG-2 File In Webpage From Home Server?

Dec 20, 2012

I have setup a webserver on my home PC and I have forwarded port 80 on my router to the IP adress of the PC that is running the web server. The web server is working great; I can get to my web pages from outside of my home by going to http://MyIpAddress/Anyway, the problem is with the Windows Media Player plugin I'm using. I want to embed 6GB MPEG-2 videos into my web pages. I have some videos on my PC and I want to be able to watch them remotely by connecting into my web page. It works fine when I'm at home; other PCs can connect and play the videos no problem. The problem is when I'm at work. When I'm at work, I go to my web page (via my IP address in a web browser) and the Media Player plugin says "Connecting" for a minute, then it says Ready, but the video will not play. I tried using a smaller, AVI file (680 MB) instead to see if the problem was streaming such a large file, but the video still would not play.Do I need to foward more ports on my router so that Windows Media Player can connect back and get the information it needs?

View 4 Replies View Related

How To View All Network Traffic On Router

May 6, 2012

How to view all network traffic on your router not just your computer? Using wireshark. Window 7 and Ubuntu.Without using any enhancements like airPcap or Turbo cap.

View 4 Replies View Related

Home Network :: Use Internet Of Workplace From Home Via Dial-up Connection?

Oct 3, 2011

I have ADSL modem in my workplace that is connected to a switch and other workplace computers are connected to this switch so the ADSL internet is shared in LAN network.(in each of computer I set default Gateway to ip of modem .....)I want to dial my workplace from home and then use of workplace internet or connect to workplace LAN.(such as VPN or Port Forwarding or I don't know...)

View 11 Replies View Related

Home Network :: Latest Ethernet Cable For Home Wiring?

Sep 20, 2011

I'm currently in the process of buying the new property, which is in the build process and would like to put some cables across 3 floors, which would be connected to the router downstairs.

View 3 Replies View Related

Home Network :: Windows 7 Laptop To XP Home Desktop Wireless

Mar 13, 2011

I have been having a bit of trouble with networking my two machines to share files and allow printing i have a win 7 laptop and a xp home desktop. I share a net connection via 02 wireless box both systems have wireless i have tried many things

View 8 Replies View Related

Home Network :: IPhone Kills Home Network

Oct 17, 2011

Every time I connect to my home network with iPhone 4 my whole network stops working. Windows 7 is not reporting any problems with connection, nor is my router. I have cable connection with my PC and wireless with my laptop, they both just stop working without any visible reason. Even the iphone i connect with wont work, but of course it says its connected and everything is ok.I tought it was an iOS 5 problem, so I reinstalled it. It worked for an hour then its all back again. I even tried sharing my PC conection so that my iPhone is connected to PC and not directly to router.But that produced the same results.

View 6 Replies View Related

Home Network :: Unique Situation With Home Network

Mar 9, 2013

My Set up at home is as follows: [code] Now according to what I have read I should be able to set the subnet on .2.0 network to a subnet of 254 and this gives me 512 Hosts I believe however my question at this point is how to route between 192.168.1.0 and 192.168.2.0.Or when I set the subnet .254 does the router just route it automatically.I would still set the subnet mask on both networks to 254 correct? I believe I can only use 192.168.0.1 to 192.168.1.255 w/.254 subnet mask. However I already have some servers that are configured with applications (On the 192.168.2.0 network) that I do not want to change ips on because it would be a pain to reconfigure so, my other question is other than using .252 to extend it to 192.168.0.1 to 192.168.3.255, (I need the 192.168.2.0) is there anything I can do? Like use 192.168.1.0 with subnet mask of 255.255.254.0 to get the 192.168.2.0 network? The reason I asked is I was using a subnet calculator to try and figure this out but every time I put in 192.168.1.0 with .254 subnet mask it changed the ip to 192.168.0.1 to 192. 168. 1. 255.I would really like to use the netgear only. The way I have it now is not working I am able to ping the internet from the 192.168.1.0 network but I can't ping from 192.168.2.0 network to the 192.168.1.0 network.

View 2 Replies View Related

Home Network :: Setting Up A Small Home Network Of 10 PC's?

Jul 27, 2012

want to setup a small home network of about 10 PC's.I want them to share the internet connection of 25mbps.I also want Printer Sharing.

View 2 Replies View Related

Home Network :: Integrating 3550 Into Home Network?

Jul 13, 2012

At the moment I have my home network (192.168.0.0/24) like as below (all connect using straight cables): [code] My Cisco lab equipment are in the basement all connecting to an access server which at the moment is plugged into Switch3-dumb (along with a printer & NAS).What I'm thinking is to replace the Switch3-dumb with a 3550 I'll be picking up later this week.Then using this to do as the Switch3-dumb did maybe by creating a native 'vlan 192' & putting it into a gig interface which will connect to the network using the straight cable, also putting the printer & NAS into the same vlan.This will hopefully still give me connectivity throughout.Then when required I'll like to use the 3550 with the rest of my Cisco equipment for setting up different labs (segmenting them from the home network by using different vlans etc.One of my reasons to implement the 3550 into the home network is to be able to play about on a regular basis (port monitor, traffic stats, etc).

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved