Cisco :: Configuring Rcp On Ciscoworks LMS 2.5 And 3560 Switch
Jul 13, 2011I am having LMS 2.5 and nearly 50 cisco 3560 in my network. And I want to configure rcp. How can I do it.
View 1 Replies
ADVERTISEMENT
Cisco WAN :: Cat 3560-E / 2960-G - Configuring Two VLANs On Same Switch Port
Mar 29, 2012As per my attached diagram, I have three switches (Cat 3560-E and couple of Cat 2960-G)
Each PC is on different vlan
PC -1 on vlan 100
PC-2 on vlan 200
I need to connect PC-1 and PC-2 to the server. Server has no fixed vlan and can be changed.
Restrictions:
1) can’t change PCs vlan assignment.
2) can’t add 2nd NIC in the server.
I’ve tried private vlan but it requires separate physical ports for host and/or community vlan and somehow it did not work. I could be wrong Trunking using dot1q enabled on port 2 on all switches and connection works fine (server to PC-1 or server to PC-2) by enabling switchport access vlan 100 or switchport access vlan 200. However I need port 5 on switch-1 to respond to vlan 100 and 200.
Cisco :: Configuring Email Alerts From CiscoWorks LMS 4
Nov 6, 2012I am looking for a way to get CiscoWorks LMS 4 to send me an email alert when a switch port goers into a security violation (err-disabled).
View 2 Replies View RelatedCisco :: Ciscoworks LMS 3.2 Configuring To Take Show Tech Support
Jul 17, 2012I am running with LMS 3.2. I have added all the required devices to the LMS and its working fine and taking the backup of Start-up and running configuration as well as vlan information from the devices. My question is that can i configure LMS to take the Show tech-support of all the devices?
View 2 Replies View RelatedCisco :: Add New Network Elements (me3400 Switch) To CiscoWorks LMS 3.2?
Jan 9, 2013how to add newly installed network elements on our CiscoWorks LMS 3.2.
View 1 Replies View RelatedCisco Switching/Routing :: SSH V2.99 On 4507 Switch / CiscoWorks Cannot Pull Configurations
Apr 4, 2010I have version 2 ssh configured on a Cisco 4507r-e. Unable to sync archives with CiscoWorks. V2.99 is unsupported on CiscoWorks. Does CiscoWorks need to be updated or does the switch?
cat4500-ipbasek9-mz.122-52
LMS 3.2
# show run
ip ssh version 2
#show ip ssh
SSH Enabled - version 2.99
Cisco Firewall :: Configuring ACLs 3560 In A Lab
Dec 27, 2011In my lab setup i configured Cisco 3560 switch.
VLAN 20 and VLAN 30 i configured.
VLAN 20 interface IP : 192.168.20.1/24
VLAN 30 interface IP : 192.168.30.1/24.
Inter-vlan communication is happening fine.
For testing for purpose i configured extended ACLs. Here is my requirement: I want to stop communication from VLAN 30 to VLAN 20 but not vice-versa.
Here i configured like this:
access-list 111 deny ip 192.168.20.0 0.0.0.255 192.168.30.0 0.0.0.255
access-list 111 permit ip any any
applied ACL in VLAN 30 interface 'in' direction.
ip access-group 111 in
In this scenario, communication is stopping in both directions. If i ping from one of the IP VLAN 20 to one of the ip of VLAN 30, i was gettng Requested time out. And if i ping from one of the IP VLAN 20 to VLAN 30 interface IP, i was able get pinging.
From VLAN 30 to VLAN 20, i was getting destination host unreachable from VLAN 30 ip( Its fine as its my requirement). So, solution needed to communicate from VLAN 20 to VLAN 30.
Cisco Infrastructure :: Configuring Multicast Environment Using 2 Ports On 3560
Feb 28, 2006Ihave a 3560 w/multicast support and I'm trying to configure a simple environment. I have 2 ports configured, one for the multicast server and the other for the client. Each are on their own subnet, so I have an ip route between the two. My run config on both ports is:
ip multicast-routing distributed
interface fastethernet 0/3 & 0/4
ip pim version 2
ip pim sparse-dense-mode
I'm using vlc server /client configured to use 224.0.0.1 on my isolated network. I can see the mulitcast traffic going into the port, and I the client is sending reports, but I think the 3560 is dropping the packets, since I don't see them coming in the client port. Need to configure a simple multicast environment using 2 ports on a Cisco 3560.
Cisco Switching/Routing :: Connecting 2x 3560 And Configuring LACP?
Jan 29, 2013We have 2x WS-C3560X-48 with the 10Gb SFP C3KX-NM-10G module.I want to use the 10Gb SFP (with a redundant 1Gb link) between each of the switches.Below is the configuration what I think I should use. Is this correct?
SWITCH1
int TE1/1
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode active
[code]....
We also want to utilise Link Agrrigation for the servers that attach to the switch. Would this config be correct?
port-channel load-balance src-ip
int range x
switchport mode access
switchport access vlan 1 (They are all on the default vlan)
spanning-tree portfast
channel-group x mode active
(Then I would configure the LACP config on the server) Is there anything I am missing?
Cisco Switching/Routing :: 3560 CG Port Goes Down When Configuring Trunking
Jan 31, 2012I have a 3560 8 port switch. Int gi0/9 is trunked to another switch downstream. When I try to configure int gi0/10 to trunk to a switch upstream the interface on the switch goes down and I have to either reboot the switch or plug directly into the switch and telnet into it to turn off trunking on the interface. When I configure trunking on the interface on the upstream switch that connects to this interface the same happens on that switch. The upstream switch is a 3750 with 12 sfp ports. Several interfaces are trunking to other switches from this switch. Spanning tree is not configured on the 3750 at all , and is not configured on either gi0/10 or gi0/9 on the 3560. I was consoled into the 3560 during a reboot after the interface went down, a message came up that said something like "Spanning Tree returning gigabit ethernet 10 to constant state" Why would I get this message if spanning tree is not enabled on the gig ports on either end of the trunk? There is no loop to require spanning tree to shut down an interface. I have several other 3560's configured as I would like to configure this switch and they are trunking without issue.
View 8 Replies View RelatedCisco Security :: 3560 - Configure Encryption With MACsec Switch To Switch?
Jun 28, 2012I have a problem, i would like todo MACSEC betwwen two switches cisco catalyst 3560-x but I know that for this operation i needed ACS server 5.1 is it possible to encryp dataflow without ACS server and if you have the configuration
View 7 Replies View RelatedCisco Switching/Routing :: 3560 - Configuring Qos / Traffic To Go Into High Priority Queue
Nov 19, 2012i have a 3560 connecting to a sp with limited bandwidth. i have one interface on the switch whose traffic i do not want to drop. i want this traffic to go into the high priority queue. i am not sure how this should be configured, but here is my best guess and my current qos configuration on the switch:
qos map cos-dscp 0 8 16 26 32 46 48 56
mls qos srr-queue output cos-map queue 1 threshold 3 5
mls qos srr-queue output cos-map queue 2 threshold 1 4 6 7
mls qos srr-queue output cos-map queue 2 threshold 2 3(code)
since cos 5 is mapped to dscp 46 then this traffic would go into the priority queue. is this correct ?
Cisco LAN :: 3560 Cannot Ping After Moving PC From Switch To Switch
Apr 15, 2013I have a 2 cisco switches that are at different sites one is a Cisco CAT4500 and other 3560. The connection between the switches is a layer 2 fibre link. CAT4500 and 3560 both have VLAN interface ip addresses in order for me to connect to the switches.
I have PC A connected to CAT4500 and PC B connecting to 3560. All these devices are the same VLAN and in the same subnet. I do have trunk links all the way though allowing this vlan as we run vlans. From PC A, I can ping CAT4500, 3560 and even PC B. This tells me everything is fine regarding Layer 2 & 3.
As soon as I move PC B and connect it to the other switch CAT4500 or move the other PC vice versa (this happens in both directions). Both switches learn that the mac address has moved locations and updates its mac address table accordingly. So when I do a show mac address table and show arp, everything has learned and moved fine. However when I try to ping any other device from PC B I cannot. So the 3560 switch PC B was originally connected to, I can no longer ping, the switch cannot see the pc also. It is as if PC B has not learned anything from the switch and cannot respond or reply to any icmp. I have tried this with different end devices, same thing. I am now thinking it has something to do with the switch.
Cisco WAN :: IOS Upload In 3560 Switch?
Aug 8, 2011how can i upload IOS in Switch when it is in ROMMAN Mode , its show IOS in flash but may pe Corrupt, show how can i put New ios in Switch 3560.
View 1 Replies View RelatedCisco WAN :: 3560 - Possible To Use Layer 3 Switch For BGP
Apr 22, 2011can i use normal two L3 Switch(3560) for BGP Multihoming with 2 different isp
View 4 Replies View RelatedCisco WAN :: 3560 SLA Monitoring In Switch
Jun 26, 2011How to configure SLA monitoring in 3560 switch. I have 2 DSL links terminating in switch and want to do WAN failover. I know how to do in ASA and router. I found IP SLA and track commands on switch but don't know exactly how to use them.
View 2 Replies View RelatedCisco Wireless :: Updating IOS On 3560 POE Switch?
Jul 24, 2012I am using Cisco 3560 POE -WS-C3560CG-8PC-S- switch for my AP's. The current IOS i got on this switch don't allow me to use web console. when i am click on webconsole i am getting attached. what is the best way of removing and installing new IOS.
View 5 Replies View RelatedCisco WAN :: Latest IOS For Switch Series 3560
Dec 17, 2011I am looking for The latest IOS Available for cisco 3560 Series Switch, User guide for the same And All Supported features specification Guide.
View 7 Replies View RelatedCisco WAN :: Why Getting Temperature Event In 3560 Switch
Mar 9, 2013why getting temperature event in 3560 switch, and we checked the Network room Temp it's normal around (22).
View 8 Replies View RelatedCisco Switching/Routing :: 3560 Switch With LAN QoS
Jun 5, 2012I have issue with 3560 switch QoS configuration . I checked in cisco site about mentioned model QoS configuration.once we mark the frame and map the CoS to DSCP and once it enters into switch and it processes according to LAN QoS configured on interface
we have configured both the commands shape and share.
once it leaves the switch and enters into Edge router and if we do not have configured QoS in router which is normally MQC , how does it process each packet ?Do we need to have end to end QoS configured in LAN ?
Cisco WAN :: High CPU Utilization On 3560 Switch
Oct 6, 2009We are facing a weird problem of high CPU utilization on 3560 switch. Even without connecting a single PC to switch, CPU utilization is showing 22 %. Any particular reason for this? Can configuration affect the CPU utilization even though there is no PC connected?
View 5 Replies View RelatedCisco Firewall :: Configuring VLANs In ASA 5505 Switch
Apr 19, 2011I have 2 ASA 5505 firewalls and 1 cisco 3560 switch.
One ASA 5505 firewall and cisco 3560 switch located at SITE-A. Another ASA 5505 firewall located at SITE-B.
Below is the my connectivity:
Site-A IPSec VPN Site-B
cisco 3560 <----------------------------> ASA 5505<------------------------------------------------------------------------------------> ASA 5505
I planned to create 5 vlans in my cisco 3560 switch. these 5 vlans needs to have internet and needs to access Site-B.
I will write on dafault route to firewall in my cisco 3560 switch. Is ASA 5505 supports this scenario??? If it is then how to configure ASA 5505 firewall.
Cisco WAN :: 3945 - Configuring Routing With Switch Module SM-ES3-24P
Oct 11, 2011We have Cisco 3945 Router with SM-ES3-24P Switch Module. when we tried to configure routing in Router and Layer 3 ports on Switch module, the inter-communicaiton is not working?
how we can use routing in 3945 with SM-ES3-24P module?
Cisco :: Connecting Pxe Server To Client Using 3560 Switch?
Jul 21, 2011pxe server ip address is 10.10.10.20 which is connected to switch port fa0/9 and client is connected to switchport fa0/7.i have only 3 devices altogether. below is running config of switch. wen i boot the client from the server, it display error message as: "proxy dhcp were offered. none dhcp were received. exiting broadcom pxe."
Switch#sh run
Building configuration...
Current configuration : 2710 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption[code].....
Cisco WAN :: Connecting Cable Modem Through 3560 Switch?
Apr 12, 2011I have a 3560 series switch and two comcast cable modems. I connected the modems to them switch via cross over cables and set an OSPF routing on their subnets. I connected my wireless router to another port of the switch and set its gateway IP on the switch port. I can ping the modem with the switch and I can ping the wireless too. But I cannot access to the Internet via the wireless router.
I need load balancing on two cable modems and get a single network connection via the wireless router.
Cisco Switching/Routing :: How To Take Event Log Of Switch 3560
Feb 26, 2012how to take the event log of Cisco switch 3560, its argent.
View 1 Replies View RelatedCisco Switching/Routing :: Implement QOS On 3560 Switch?
Nov 22, 2011I have a 3560-48 switch running Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(44)SE3 and i need to implement basic QOS commands to the fast Ethernet interfaces as well as the gig interfaces and Also I need to create port channels on the switch and need what the port channel syntax are as well for that particular IOS version?
I have only read only access and i can't see what the QOS and Port channels syntax should be for that IOS version.
Cisco WAN :: WS-C3560-48TS / Is GRE Supported On 3560 Switch And IOS
Feb 14, 2012I have below switch and I was interested in configuring GRE on one of the interface. So I tried to create tunnel interface, the tab completes the command. Is GRE supported on this switch and IOS?
Switch#show version
Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
......
cisco WS-C3560-48TS (PowerPC405) processor (revision G0) with 122880K/8184K bytes of memory.
Switch(config)#interface tunnel 0
^% Invalid input detected at '^' marker.
Switch(config)#
IP routing is also enabled.
Cisco Switching/Routing :: QOS Config On 3560 Switch
Jul 22, 2012I'm in the process of configuring QOS on a 3560 routing switch in a GOLD, SILVER, BRONZE priority type scenario.
Firstly, I understand that this config will add a tag of "precedence 5" to a packet if it matches the "ACL_QOS_GOLD_In" access list. Question is does the router see this "precedence 5" tag and then sets the priority, or am I missing something in my config where at present it just sees the "precedence 5" and doesn’t act on it ?
Secondly, Since the "precedence 5" tag has already been added to the packets, do downstream routers see this tag and act accordingly or so I need to configure those is well ? [code]
Cisco WAN :: 3560 Switch Vlan And Router Configuration?
Feb 10, 2012In our new Head office we have to set up a Network connectivity.Total our office 4 floors.In each floor we kept three cisco 2950 switch.We have L3 switch(cisco 3560) to connect the all the other switch.In our office total 5 departments.we have to create VLan for each departments in the switch.
We want to all user to communicate to each other.We have WAN connectivity in the router(cisco 2900) to connect the other office.First i want know how to physically connect all the swiches and finally with the L3 switch.How to configure the VLAN in both L2 and L3 switch.In our other client office one router to connect the both office.In the router how to configure and which protocol to use to communication.
Ip address:10.10.40.0/22
WAN IP :192.168.214.65/30
Cisco WAN :: How To Run 2 Data Vlans Off Same Port On A 3560 Switch
Dec 8, 2010I have a 3560 switch 48 ports ios version 12.2( 35)SE5
I want to run two data vlans on the same port. Currently the port is in access mode and set to vlan30 I want to add vlan 40
I wanted to use multi mode, on this switch not an option but private-vlan is, ? what version of ios do I need to run the multi mode or can I do the same thing with private-vlan.
Cisco Switching/Routing :: Configure QoS On 3560 Switch?
Jun 7, 2012configure QoS on 3560 switch i have taken the template from cisco configuration guide since we have different QoS configuration on each model.
below is the configuration :
configure terminal
mls qos
end
mls qos map cos-dscp 0 8 16 26 32 46 48 56
no mls qos srr-queue input cos-map mls qos srr-queue input cos-map queue 1 threshold 2 1 mls qos srr-queue input cos-map queue 1 threshold 3 0
[code]....
Currently all the cisco phones are connected to this switch and configuration with only one vlan that is voice vlan .
1) what is the outcome of this configuration , i mean, what will be the expected output ? end of the day we need to prioritize the voice traffic but why other commands including threshold and buffers are mentioned with respectives queues , if I need to explain that what am i expecting out of this configuration ?
2) this is LAN QoS which i understood but again , do i need to configure policy-map along with class-map which is MQC on this switch ?
3) i have edge router where i have MQC already configured but confusion with this switch which is working as a Access switch .
4) I referred the cisco QoS document for the respetive model whereas we have policy-map configured on the same switch with class-map .
My understanding is if we have configured the LAN QoS , and mapped the CoS value with DSCP , we need not to have MQC.
Cisco Security :: Which IOS Version Of 3560-X Switch Support NAC-L2-IP
Apr 20, 2011Which IOS version of 3560-X switch support NAC-L2-IP ?
View 1 Replies View Related