Cisco :: Add New Network Elements (me3400 Switch) To CiscoWorks LMS 3.2?
Jan 9, 2013how to add newly installed network elements on our CiscoWorks LMS 3.2.
View 1 Replies
ADVERTISEMENT
Cisco WAN :: ME3400 Switch Not Passing Traffic
Jan 17, 2011I have an Cisco ME3400-24TS-A Switch with is not behaving normal.
I have already erased its flash, uploaded new IOS but could not fix the issue. However it boots normally and pass all tests show in boot process. Issue is this the i cant access or ping the computers attached to its ports from one to other.
However i can ping the switch vlan 1 IP from all computers attached to it.
When i tried Debug All Command, its shows the following:
debug all
This may severely impact network performance. Continue? (yes/[no]): yes
All possible debugging has been turned on
Switch#
*Mar 1 00:03:41.467: special_oce_change_vectors: select debug vectors
[Code]....
Cisco Switching/Routing :: ME3400 Switch High CPU Utilization Due To ARP Input
Sep 3, 2012We have Cisco ME3400 switch, with configuration described below.
GE0/1 port is uplink:
interface GigabitEthernet0/1
description ***MATED-IUB_C&U-Plan***
port-type nni
switchport trunk allowed vlan 331,450,4085
switchport mode trunk
GEo/2 is configured as below:
interface GigabitEthernet0/2
description ***From NIB***
port-type nni
switchport access vlan 4085
[URL]
We have also tried Loopguard feature enabled on all ports: but after some period same problem is repeated.
version information is below:
Cisco IOS Software, ME340x Software (ME340x-METROIPACCESSK9-M), Version 12.2(25)SEG3, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 25-Jul-07 22:56 by amvarma
Cisco Switching/Routing :: ME3400 Switch Set To Routing SDM Template
Dec 18, 2012You can set the ME3400 switch set to the Routing SDM template such that it support PBR. That is done in the ASICs, right? Because if it is done in software the switch could quickly become overwhelmed.
View 2 Replies View RelatedCisco :: Configuring Rcp On Ciscoworks LMS 2.5 And 3560 Switch
Jul 13, 2011I am having LMS 2.5 and nearly 50 cisco 3560 in my network. And I want to configure rcp. How can I do it.
View 1 Replies View RelatedCisco Switching/Routing :: SSH V2.99 On 4507 Switch / CiscoWorks Cannot Pull Configurations
Apr 4, 2010I have version 2 ssh configured on a Cisco 4507r-e. Unable to sync archives with CiscoWorks. V2.99 is unsupported on CiscoWorks. Does CiscoWorks need to be updated or does the switch?
cat4500-ipbasek9-mz.122-52
LMS 3.2
# show run
ip ssh version 2
#show ip ssh
SSH Enabled - version 2.99
Cisco Firewall :: ASA 5505 Can't See Any Elements About Physical Interface
May 30, 2011I enabled snmp config ASA 5505 with Version 7.2(4), the NMS/reporting system can give graphs for CPU & Memory usages. But I can't see any elements about physical interfaces.
View 1 Replies View RelatedD-Link DCS-930L :: Setting Camera Outside Exposed / Sensitive To Elements?
Nov 30, 2011I'd like to have an outside view. Have any of you tried setting up one of these cameras outside? Not fully exposed, say under an eve or carport? Are they sensitive to humidity and/or temperature?
View 4 Replies View RelatedCisco Switching/Routing :: ME3400 Crash Unexpectedly?
Mar 13, 2012Our ME3400 crashed unexpectedly and got the below errors:
meQCY0290A#sh ver
Cisco IOS Software, ME340x Software (ME340x-METROACCESSK9-M), Version 12.2(55)SE, RELEASE SOFTWARE (fc2)
[Code].....
Cisco Switching/Routing :: ME3400 Limited CDP Entries
Apr 4, 2013I have the ME3400 deployed in an the following design. 8 100Meg ports connects to Cisco 2955s, and the 1Gig port uplinks to a Cisco 3560. My CDP neighbour table only shows an entries for the uplink Gig port. If I look at the CDP stats in the show cdp Interfaces Fastethernet 0/1,, I see CDP packets being sent every 60, but nothing returning.
View 4 Replies View RelatedCisco Switching/Routing :: ME3400 - No Username And Password
Jul 4, 2012I have Cisco ME3400 series switch .Unable to login as i have no user name and password. I want to set the swirch to factory default but not found any nub to press.
View 2 Replies View RelatedCisco WAN :: ME3400 / Injecting Two Default Routes Via Ospf Into Service Provider MPLS?
Jan 24, 2011We have multiple sites that are linked via MPLS (L3) circuits. We have good size circuits for Internet at two main sites (HQ and QC) and smaller sites come to HQ site to go to internet. We are running ospf (Cisco L3 switches) with service provider (ME3400) at these two main sites and service provider then redistributes routes back into MPLS via BGP and then smaller sites ME3400 learn these routes. i am injecting default routes from HQ and QC, but Telco is only redistributing default from HQ. So large pipe Internet at QC is not being used effeciently. Also if MPLS at HQ fails, then we are told, we need to call Telco and they will make change in their network to now start distributing default from QC.it was my understanding that telco can use BGP communities and advertize one default as prefered and second with higher cost, so that failover can occur automatically. And that they can also set up so that west cost sites use HQ and east cost sites can use QC for going to internet, but they say it is not possible.it the least, can I do something like this at my end for failover for internet, in case MPLS at HQ goes down (soon we will be setting up a point to point VPN tunnel between HQ and QC so that MPLS failure at HQ will trigger advertisement of HQ routes over tunnel via QC into MPLS, so other sites can then come to HQ thru QC over this tunnel. At QC Cisco router (to detect loss of default route from HQ and then start advertizing default from QC)
router ospf 1
default-information originate always route-map From_HQ
exit
ip access-list standard From_HQ
[code]....
Cisco Switching/Routing :: ME3400 Boot Loader - Intervlan Routing
Sep 5, 2012On cisco and am having some issues with intervlan routing. I have followed the vids and manuals but just can seem to get this working. I have the following network lab set up.
Vlan 10 = 10.70.1.9/24
Vlan 20 = 192.168.0.1/24
ME2400 firmware
ROM: Bootstrap program is ME340x boot loader
BOOTLDR: ME340x Boot Loader (ME340x-HBOOT-M) Version 12.2(35r)SE3, RELEASE SOFTWARE (fc1)
[Code]...
Cisco :: Ciscoworks Upgrade To LMS 3.1?
Jul 13, 2011At present we are using the Ciscoworks LMS bunde 3.0. I would like to upgrade to LMS 3.1.
My Question: Is it possible to upgrade to LMS 3.1 with using the existing LMS 3.0 license.
Cisco :: LMS 3.2 Logs Missed In Ciscoworks?
Aug 31, 2011There was a interface down in one of critical devices in the network.that particular log is not captured by the ciscoworks(DFM-alerts).
View 1 Replies View RelatedCisco :: SSH Authentication Failure CiscoWorks LMS 4.0
Oct 24, 2012I am trying to get CiscoWorks LMS 4.0 to connect to my routers in order to back up configurations, but I am getting SSH authentication failures reported in the router logs (and archiving fails).
The credentials LMS is using is a username and password with priviledge 15: the account is established in TACACS+. I can log into the devices directly with this user account.However, I cannot TFTP from the routers to the LMS either (I get a permission denied message in the router).
LMS did manage to fetch some configs, but 90% of my devices are having this issue.
Cisco :: Link Download Ciscoworks LMS 4.0
Sep 11, 2011I need download LMS 4.0 eval trial. But i can't see any link down on url...
View 1 Replies View RelatedCisco :: Fault View CiscoWorks LMS 4.0.1?
Oct 23, 2011I upgraded the LMS 4.0 with LMS 4.0.1 but now the events are removed of Fault View. The equipments than I am monitoring are: ME-3600, ME-3800 and ASR 9000. This is a configuration problem or I have to update something else?
View 1 Replies View RelatedCisco :: CiscoWorks With LMS 4.x NetShow Jobs URL
Jul 10, 2011I have upgraded our LMS 3.x to the new LMS 4.x Version. have installed the new 4.x on an new server and importet the backup.
I have importet a Certificate and have enabled the Browser-Server Security Mode, Enabled I added some new Netshow Jobs which run every day.
I get the email from the jobs and the URL in the email but, URL
When i click on the link i only get:
Forbidden: You don't have permission to access /rme/NSViewJobResults.do on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
i must change the link to Urls there anywhere an option to edit the text which is send with the jobs, to fix the url?
Cisco :: CiscoWorks LMS 4.0.1 - Could Not Generate The Report
Sep 26, 2011I am running CiscoWorks LMS 4.0.1 since 6 months and I wanted to generate today a report about the interface utilization on 2 Cisco switches (Catalyst 3750G). The corresponding job is created, it runs and then i get "succeeded with info" in the "Run Status" column. When I want to click then on the "View Report" link, I get the following error: "Could not generate the report. Either data is not available for the specified duration or the report job failed."
I tried the same procedure with 2 other switches but I have got the same result.
Cisco :: CiscoWorks Appliance In T2000
Jul 25, 2011A while back we were looking into upgrading our SUN/Oracle server to better service our CiscoWorks. Our vendor (partnered Cisco Vendor) told us that Cisco was developing an appliance like WCS and CNR that runs Redhat for CiscoWorks.Does any one have any info on this or could this be a rumor?
We do not run Windows devices on any of our network enterprise and this would be so cool!
Oracle is getting to be a clone of Windows..in our opinion
If this is true, I will happy to sit and wait for it.
We now run LMS 4.0 on a SUN/Oracle T2000 and it seems to be bottlenecking.
Cisco :: How To Get Ciscoworks LMS 4.0.1 Serial Number
Dec 11, 2011How to get Ciscoworks LMS 4.0.1 serial number ? I need that to put the product under mainrtenance, and I can't manage to get it.
View 2 Replies View RelatedCisco :: LMS 4.0 / How To Integrate NetFlow To Some Ciscoworks Module
Jun 20, 2012how to integrate NetFlow to some Ciscoworks module.
View 3 Replies View RelatedCisco :: LMS 3.2 CiscoWorks Daemon Manager Does Not Startup
Dec 20, 2010When trying to start CiscoWorks Daemon Manager i get the following message:"The CiscoWorks Daemon Manager service on local computer started and the stoped. Some services stop automatically if they are not in use by other services or programs."I have tring starting the service from DOS also and get,E:Program FilesCSCOpxsetupsupport>net start crmdmgtdThe CiscoWorks Daemon Manager service is starting.The CiscoWorks Daemon Manager service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534.
View 11 Replies View RelatedCisco :: Configuring Email Alerts From CiscoWorks LMS 4
Nov 6, 2012I am looking for a way to get CiscoWorks LMS 4 to send me an email alert when a switch port goers into a security violation (err-disabled).
View 2 Replies View RelatedCisco :: Cat3750x Stack Upgrade From CiscoWorks
Jul 26, 2011I am trying to use Ciscoworks LMS3.2 with RME 4.3.1. to upgrade many, many Cat3750x stacks we have laying around. The problem I am having is that Ciscoworks downloads the new image to the Stack’s master switch only and not to all switches. When I reload the stack after the download, any switch could become the master. I already set up the priority to always have the same master, but the process is unreliable and more than once I ended up with another switch as a master. In any case if the master is not the switch with the new image, the stack will keep the old image as their running image and the switch with the newer image has problems joining the stack (after a while it downgrades and become stable)I know how to do it manually, but I was hoping Ciscoworks would be able to do this for me. It would make my life much easier.
View 1 Replies View RelatedCisco :: CiscoWorks Won't Start After LMS Upgrade 3.0 To 3.2 / Error 502
Nov 24, 2012I upgraded CiscoWorks LMS from 3.0 to 3.2 today. Everything worked prior to the upgrade.The upgrade was successful, with no errors, and all services started. check everything and I see no problem. The system creates the file MDCSupportInformation.zip me clean without any content.I add the installation log file;And tell them that after upgrading to 3.2, you carge the following patches:
LMS321-win-CSCtr77570-0.zip,
cm5.2.1-nt-CSCtw88763-1.0.zip,
lms3.2.1-win-CSCts95764-0.zip,
lms3.2.1-win-CSCts82530-0.zip
in that order.He added the logs generated by the LMS services Tomcat and Apache
Cisco :: CiscoWorks LMS 3.2 With TACACS Role Authentication?
Jan 4, 2011I'm trying to get user authentication backed off to ACS 5.1, I've got it working but not the way I'd like. This is using the TACACS settings not ACS mode.I've created a local user in CW and assigned it to the correct roles, then created a user in ACS with the same name and a different password and this works fine.My question is can I set the roles on the TACACS server using a shell profile/custom attributes. All the documentation I can find is for ACS v4?
View 15 Replies View RelatedCisco :: LMS 3.2 / Ciscoworks RME Syslog Automation Actions
Nov 20, 2011I set up RME several years ago on our Ciscoworks several running LMS 3.2 to notify us on any BGP flaps via email notification.I noticed the last couple maintenance period where we had perform Circuit work with our ISP's. We haven't received any emails....I verified those routers are configured to send notifications in the Device Selector and even checked the router logs.
004161: Nov 20 05:04:52 EST: %BGP-5-ADJCHANGE: neighbor X.X.X.X Down BGP Notification sent
004162: Nov 20 05:04:52 EST: %BGP-3-NOTIFICATION: sent to neighbor X.X.X.X 4/0 (hold time expired) 0 bytes
The syslog collector status appears to be normal.....
Cisco :: CiscoWorks LMS 4.0.1 And Remote Syslog Collector
Nov 11, 2012I'm using CiscoWorks LMS 4.0.1 and I need to activate a remote syslog collector.Installation occur without errors and the test subscription is fine but syslog reports are always empty!These two servers need to communicate through a firewall.I'm not able to define a correct rule, a "permit ip any any" does not work also!
View 1 Replies View RelatedCisco :: CiscoWorks LMS 4.0 Fresh Installation On Windows 2008 R2?
Sep 18, 2011I'm installing CiscoWorks LMS 4.0 on a server running Windows 2008 R2 Standard Ed, 64 bit. I'm using the patch to run the setup program. Now I'm upgrading to 4.0.1 without using the patch.
View 1 Replies View RelatedCisco :: Ciscoworks 3.2 RME Compliance Management With 802.1x Port Configuration
Nov 6, 2011i am currently trying to use LMS 3.2 Compliance management to verify and alter our access port configurations for 802.1x. Below is our current configuration
View 1 Replies View RelatedCisco :: 7606-s / Snmpwalk Gives Timeout Error - Ciscoworks
Sep 17, 2012I used the below syntax to check the snmpwalk to an interface of a cisco 7606-s router from an LMS 4.0 version cli.
NMSROOT/Objects/jt/bin>snmpwalk -v 2c -c <snmp-string> <ip-addr> 1.3.6.1.2.1.31.1.1.1.6
Timeout no response from <ip_address>
This is the error im getting in cli prompt. But i could see that reports are generating.If i try with the loopback ip address, i get proper snmpwalk outputs.. I have increased the timeout and retry options..