Cisco :: LMS 4.0 / How To Integrate NetFlow To Some Ciscoworks Module
Jun 20, 2012how to integrate NetFlow to some Ciscoworks module.
View 3 Replies
ADVERTISEMENT
Cisco Switching/Routing :: 3750-X Way To Get NetFlow Support Is To Install Specific Module
Sep 17, 2012I've been researching the 3750-x Netflow support but I'm not 100% sure of how much support it has. From what I've read the only way to get NetFlow support is to install a specific module that provides NetFlow. I also heard about how it might support s-flow but I haven't found out for sure.
View 8 Replies View RelatedCisco Switching/Routing :: 4948 - Difference Between Netflow / Netflow-Lite
Mar 13, 2012Any major difrrence between Netflow v/s Netflow-Lite?
I am trying to understand if Cisco 4948E can do the same job as Cisco 4500E or not and difference between Netflow v/s Netflow-Lite will work for me to select correct product.
Cisco :: How To Integrate WLC 2100 With ACS 5.0
Jan 17, 2011i have a cisco ACS version 5.0, I need to authenticate a wireless users connected to WLC 2100 controller when i connect the controller to a Dot1x port in the switch , the port go down.
View 6 Replies View RelatedCisco Firewall :: How To Integrate ASA With 2951
Nov 6, 2011I recently installed a 2951 with a security plus license..I hate it (security featuers not router) and would like to put the asa back in place.how to integrate the asa with the 2951, I believe I need to run it in multi context mode.
View 3 Replies View RelatedCisco WAN :: 5520 Best Way To Integrate 20meg WAN Link Into LAN
Jan 16, 2012We have a core 6500 switch that has a PRI module in it that binds (4) T1 lines together and we also have a 2600 Rtr that binds 4 other T1 lines together and pipes them into a ASA5520. We are changing WAN vendors but still have to maintain the (8) T1 connections until our contract runs out, which will be in a few years. The 8 T1's are not enough bandwith for our operation and we will be adding a 20meg WAN link in the next month. What I am trying to figure out is how to best integrate 3 different WAN links into one LAN. What I am thinking of doing is to leave the 6500 core switch as is and then to purchase a router that can hold (4) T1 wics and the 20meg link. Is it possible to bind those 5 links together even though they are different vendors?
View 4 Replies View RelatedCisco :: Integrate Remote Syslog Collector With LMS 4.1
Jul 7, 2012We have LMS 4.1 in our network. We had recently installed Remote Syslog Collector on a new Server to collect logs from all the devices. How can we integrate the Remote Syslog Collector with the LMS Server?
View 3 Replies View RelatedCisco :: Integrate 1250 To Active Directory
Jan 5, 2011I have installed 4 unit Cisco Aironet 1250 acting as Autonomous AP each. I want to integrate these AP to Windows Active Directory for authentication level.
When I read configuration guide on Cisco Aironet, they must be authenticated via RADIUS server.
Is it possible that these AP directly authenticated to Active Directory via LDAP protocol?
Cisco Wireless :: 5508 - Any Way To Integrate 5760
May 15, 2013We are looking at possibly adding a second 5508 controller to our network and running in HA mode. I see now that there are 5760's available that run on IOS. Is there any way we can integrate a 5760 into our existing network instead of going with a second 5508? I would prefer to invest in newer hardware whenever possible.
View 15 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.2 Appliance Integrate Multi Domain
Sep 1, 2011I have a question. What is the requirement of integrate ACS 4.2 Appliance and AD about CA server? it has to be windows 2003 server enterprice o windows 2008 enterprice? or it can be windows 2003 and 2008 stand alone? another question is about multi domain, i have domain father and children. the installation of CA Server is in domain father to enable 802.1x with AD with all domain children integrate? or I can be install the CA server in the server of domain children and is it work (CA server installed in server in domain child and it working all domains child and father)?
View 1 Replies View RelatedCisco Firewall :: Planning To Integrate ASA 5505 Device
Mar 21, 2011I planning to integrate cisco asa5505 device in runing enviornment for filter ip traffic.Internet ----router----ciscoasa----lan.Ip series is public(25.263.25.0/24) througout of network (no privateIP)now how do I set asa in such case and filter traffic from comming into lan and going out to internet.
View 5 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 - AD Integrate With Single Domain Name With Multiple ADs
Sep 3, 2011We having ACS version 5.2 0.26 with Active/Standby. We need to integrate active directory with ACS. Domain name given by Server team was as xyzcompy.local. When I tried to resolve the same domain name I got five servers ip address against the same domain name. however we given the ip reachability to only for two servers. We we try to save we get error saying that "Can not resolve the network address".
So my questions are;
- does ACS should have ip reachaibility to all five servers
- does the username/password we entered in the ACS should have domain admin rights?.
- the given AD is configured with windows NTP [URL] but when we configured ACS as windows NTP it was taking local server as active NTP..?
When we check the ACS logs, we saw the following error;
in acsLocalStore:
AdminName=acsadmin, DomainName=qatarconvention.local, ADOperationResult=unable to create secured connection against AD server, switching to non-secured connection. javax.naming.CommunicationException: simple bind failed: qnccad02.xxxxconvention.local:636 [Root exception is java.net.SocketException: Connection reset],
in ACSADAgent;
32484]: INFO dns.findsrv FindSrvFromDns failed: res_query failed _ldap._tcp.xxxxconvention.local
Sep 4 12:43:20 acs01-cc4 adjoin[32484]: INFO cli.adjoin Join to domain 'xxxxconvention.local', zone 'null' failed.
I attached some screen print which saw the error and output of nslookup for the domain name.
Cisco Wireless :: UCS C220 M3 - Integrate Prime Infrastructure 1.2.0.103 And Virtual MSE 7.3.101
Jan 12, 2013I cannot integrate Virtual MSE 7.3.101 with my Prime Infrastructure 1.2 After I setup MSE via its wizard, I make a change on WCS username and password. When I try to integrate MSE with Prime Infrastructure, Prime notify me about the mismatch username/password.
Both systems are fresh install on my UCS C220 M3.
Cisco WAN :: 2951 - Integrate To CUCM / Plug Siemens ISDX?
Mar 5, 2012I have a 2951 which i want to integrate to the CUCM and wish to plug a Siemens ISDX into it which is the best card to use
NM-HDV2-1T1/E1 or WIC2-2MFT-T1/E1? its QSIG
Cisco :: WLC 2500 - Integrate Creating Guest Users In Intranet Application
Feb 27, 2012I would like to integrate our intranet web page with Cisco WLC 2500. Is it possible to integrate custom web page with WLC. I know, that I can create custom authentication page, but what about creation of the user?
View 5 Replies View RelatedCisco Wireless :: Integrate ISE And WLC5508 With FlexConnect (local Switching) Using EAP-TLS Security?
Nov 29, 2012I need to integrate Cisco ISE and WLC5508 with FlexConnect (local switching) using EAP-TLS security for wireless clients across multiple floors (dynamic VLAN assignments based on floor level). The AP model used is 3602.
- What RADIUS Attribute can be used for dynamic VLAN assignments based on floor level? Is there an option where I can group all LWAPs in same floor for getting certain VLAN from ISE?
- I intend to use WLC software version 7.2 since 7.3 is latest version. Has someone use WLC software version 7.3 without any major bugs/issues pertaining to FlexConnect and EAP-TLS?
- I read some documents saying L3 roaminig is where the associated WLC has changed. However if user move to different subnet but still associated to the same WLC, would this be consider as L3 roaming too?
Cisco VPN :: Integrate Server PPTP On 2821 Router Series With Active Directory?
Apr 14, 2011I have a 2821 ciso router and i want to setup a vpn for my windows domain users , they must to reach the domain from outside. There is posibile to intregrate Active directory auth with pptp running on 2821 router? kind of dialin via radius server(IAS running on windows server 2003).
View 3 Replies View RelatedCisco Security :: Can Integrate Acs Version 5.x With Active Directory Microsoft Windows Server 2012
Apr 5, 2013Can we integrate cisco acs verison 5.x with active directory Microsoft windows server 2012 ?
View 1 Replies View RelatedCisco :: Ciscoworks Upgrade To LMS 3.1?
Jul 13, 2011At present we are using the Ciscoworks LMS bunde 3.0. I would like to upgrade to LMS 3.1.
My Question: Is it possible to upgrade to LMS 3.1 with using the existing LMS 3.0 license.
Cisco :: LMS 3.2 Logs Missed In Ciscoworks?
Aug 31, 2011There was a interface down in one of critical devices in the network.that particular log is not captured by the ciscoworks(DFM-alerts).
View 1 Replies View RelatedCisco :: SSH Authentication Failure CiscoWorks LMS 4.0
Oct 24, 2012I am trying to get CiscoWorks LMS 4.0 to connect to my routers in order to back up configurations, but I am getting SSH authentication failures reported in the router logs (and archiving fails).
The credentials LMS is using is a username and password with priviledge 15: the account is established in TACACS+. I can log into the devices directly with this user account.However, I cannot TFTP from the routers to the LMS either (I get a permission denied message in the router).
LMS did manage to fetch some configs, but 90% of my devices are having this issue.
Cisco :: Link Download Ciscoworks LMS 4.0
Sep 11, 2011I need download LMS 4.0 eval trial. But i can't see any link down on url...
View 1 Replies View RelatedCisco :: Fault View CiscoWorks LMS 4.0.1?
Oct 23, 2011I upgraded the LMS 4.0 with LMS 4.0.1 but now the events are removed of Fault View. The equipments than I am monitoring are: ME-3600, ME-3800 and ASR 9000. This is a configuration problem or I have to update something else?
View 1 Replies View RelatedCisco :: CiscoWorks With LMS 4.x NetShow Jobs URL
Jul 10, 2011I have upgraded our LMS 3.x to the new LMS 4.x Version. have installed the new 4.x on an new server and importet the backup.
I have importet a Certificate and have enabled the Browser-Server Security Mode, Enabled I added some new Netshow Jobs which run every day.
I get the email from the jobs and the URL in the email but, URL
When i click on the link i only get:
Forbidden: You don't have permission to access /rme/NSViewJobResults.do on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
i must change the link to Urls there anywhere an option to edit the text which is send with the jobs, to fix the url?
Cisco :: CiscoWorks LMS 4.0.1 - Could Not Generate The Report
Sep 26, 2011I am running CiscoWorks LMS 4.0.1 since 6 months and I wanted to generate today a report about the interface utilization on 2 Cisco switches (Catalyst 3750G). The corresponding job is created, it runs and then i get "succeeded with info" in the "Run Status" column. When I want to click then on the "View Report" link, I get the following error: "Could not generate the report. Either data is not available for the specified duration or the report job failed."
I tried the same procedure with 2 other switches but I have got the same result.
Cisco :: CiscoWorks Appliance In T2000
Jul 25, 2011A while back we were looking into upgrading our SUN/Oracle server to better service our CiscoWorks. Our vendor (partnered Cisco Vendor) told us that Cisco was developing an appliance like WCS and CNR that runs Redhat for CiscoWorks.Does any one have any info on this or could this be a rumor?
We do not run Windows devices on any of our network enterprise and this would be so cool!
Oracle is getting to be a clone of Windows..in our opinion
If this is true, I will happy to sit and wait for it.
We now run LMS 4.0 on a SUN/Oracle T2000 and it seems to be bottlenecking.
Cisco :: How To Get Ciscoworks LMS 4.0.1 Serial Number
Dec 11, 2011How to get Ciscoworks LMS 4.0.1 serial number ? I need that to put the product under mainrtenance, and I can't manage to get it.
View 2 Replies View RelatedCisco :: Configuring Rcp On Ciscoworks LMS 2.5 And 3560 Switch
Jul 13, 2011I am having LMS 2.5 and nearly 50 cisco 3560 in my network. And I want to configure rcp. How can I do it.
View 1 Replies View RelatedCisco :: LMS 3.2 CiscoWorks Daemon Manager Does Not Startup
Dec 20, 2010When trying to start CiscoWorks Daemon Manager i get the following message:"The CiscoWorks Daemon Manager service on local computer started and the stoped. Some services stop automatically if they are not in use by other services or programs."I have tring starting the service from DOS also and get,E:Program FilesCSCOpxsetupsupport>net start crmdmgtdThe CiscoWorks Daemon Manager service is starting.The CiscoWorks Daemon Manager service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534.
View 11 Replies View RelatedCisco :: Configuring Email Alerts From CiscoWorks LMS 4
Nov 6, 2012I am looking for a way to get CiscoWorks LMS 4 to send me an email alert when a switch port goers into a security violation (err-disabled).
View 2 Replies View RelatedCisco :: Cat3750x Stack Upgrade From CiscoWorks
Jul 26, 2011I am trying to use Ciscoworks LMS3.2 with RME 4.3.1. to upgrade many, many Cat3750x stacks we have laying around. The problem I am having is that Ciscoworks downloads the new image to the Stack’s master switch only and not to all switches. When I reload the stack after the download, any switch could become the master. I already set up the priority to always have the same master, but the process is unreliable and more than once I ended up with another switch as a master. In any case if the master is not the switch with the new image, the stack will keep the old image as their running image and the switch with the newer image has problems joining the stack (after a while it downgrades and become stable)I know how to do it manually, but I was hoping Ciscoworks would be able to do this for me. It would make my life much easier.
View 1 Replies View RelatedCisco :: CiscoWorks Won't Start After LMS Upgrade 3.0 To 3.2 / Error 502
Nov 24, 2012I upgraded CiscoWorks LMS from 3.0 to 3.2 today. Everything worked prior to the upgrade.The upgrade was successful, with no errors, and all services started. check everything and I see no problem. The system creates the file MDCSupportInformation.zip me clean without any content.I add the installation log file;And tell them that after upgrading to 3.2, you carge the following patches:
LMS321-win-CSCtr77570-0.zip,
cm5.2.1-nt-CSCtw88763-1.0.zip,
lms3.2.1-win-CSCts95764-0.zip,
lms3.2.1-win-CSCts82530-0.zip
in that order.He added the logs generated by the LMS services Tomcat and Apache
Cisco :: CiscoWorks LMS 3.2 With TACACS Role Authentication?
Jan 4, 2011I'm trying to get user authentication backed off to ACS 5.1, I've got it working but not the way I'd like. This is using the TACACS settings not ACS mode.I've created a local user in CW and assigned it to the correct roles, then created a user in ACS with the same name and a different password and this works fine.My question is can I set the roles on the TACACS server using a shell profile/custom attributes. All the documentation I can find is for ACS v4?
View 15 Replies View Related