D-Link DCS Network Camera :: 2130 Doesn't Send Notification Email On Motion Detection
Jun 2, 2012
Motion detection is setup - and I can see in the log and on the Live Video "Motion Trigger Indicator" that this part is working. I can also send test-emails, so the smtp is set up correct. In the Event Setup I have a valid server and a motion triggered event with the status ON. But no emails are sent . In the log there is also no indication of the server trying. Am I missing something - or is this not working for anybody?
And - there is no firmware beyond 1.0 for this model as far as I can see.
P.S. I am using a Gmail account for smtp, port 587 and using startTLS to send with,
View 1 Replies
ADVERTISEMENT
Dec 4, 2011
I recently set up two cameras. I had set up one for motion detection and email to a gmail account. It seemed to work fine, but then for some reason the motion detection tab didn't show the room like it did before. It doesn't show any picture or anything like it did before, so I couldn't choose the squares to choose the detection area. This is through mydlink account->camera info->advanced settings, and logging in to the camera remotely.So I switched to the other camera, and got it working as of last week. But now, the motion detection doesn't work anymore? It appears to be related to the username/password for the email account. I can no longer send test emails, it says invalid username/password, though the exact same values worked last week, and I didn't change anything. I tried resetting it, then setting it again, but no luck.
View 5 Replies
View Related
Jul 29, 2011
The idea is to get the date/time logged motion detection is triggered on a certain time frame of the day (5:00 am to 5:30 am), to a txt file or something like that. I plan to port the log to a html/php website.
View 1 Replies
View Related
May 31, 2012
I've just successfully set up my network camera and as I was running through the advanced settings, what it wants from me when it comes to setting up images being sent to my e-mail. I've looked up some old threads to get a clue and thus far nothing works. Testing my entries results in "Invalid e-mail setting" 10 out of 10 times.
The setting format I'm trying to use is as follows:
-- smtp.gmail.com
-- 587
-- myemail@gmail.com
-- myemail@gmail.com
-- myemail
-- mypassword
-- STARTTLS
My GMail account is POP Enabled (whatever that is) and I used the username for that e-mail for bother the Sender and Receiver fields, as well as that e-mails username and password.
I'm lost. I bought the camera so I could document my landlord's maintenance people "touring" my apartment while I'm at work, but I wasn't aware having it save screenshots would be so complicated.
View 2 Replies
View Related
Nov 9, 2011
On my new 942l, after 5 days of usage and tinkering with various settings, I cannot get the camera to obey the trigger=motion when configured to send snapshots over email. It does work when configured to send snapshots over email with trigger=always.Interesting enough the trigger=motion works just fine to upload snapshots to FTP. Yes, it uploads the pictures correcty on FTP detecting correctly movements, but it would not send those over email. To me it looks like a bug in the firmware that I have now a 100% repro.Are there any logs you want me to send to you for debugging?And : Is there a known workaround I can apply (reboot, resetup etc)?
Detailed description of the problem:I have setup the camera to upload snapshots to FTP AND send them over email for trigger=motion.This is what works : the snapshots are nicely uploaded on FTP , but not sent over email.Interesting : if I set trigger=always, snapshots will both be uploaded to FTP and sent over email. The moment I switch back to trigger=motion they go only to FTP and not over email.Even more interesting : the video clips work correctly with either email or FTP for trigger=motion.
What could cause this?The email (account, port, password) and FTP settings are definitely not a problem since I see pictures/videos in email or FTP with trigger=always.The motion settings are not a problem either since snapshots upload correctly on FTP when movements are detected.What it apears to be is the software is not reading or obeying correctly a certain combination of settings.I'm wondering if it has to do with the fact that for video clips the "email" and "ftp" are exclusive, but for snapshots they are allowed simultaneously. And somehow the logics get mixed up causing certain combinations of settings to now act out?
What else I tried?I tried many reboots, unplug followed by plug back in and so on.I tried saving and restoring the settings to/from a file hoping that will "reset" something.And I tried many combinations of settings, including changing the order I set and unset hoping a different code path that works will be hit.I did not try a restore to factory defaults since I installed the camera in a hard to reach place and if I restore to factory defaults i need to take it down connect it to a cable in order to redo the wifi settings.
View 7 Replies
View Related
Nov 7, 2011
I have configured my new DCS-2130 with periodic transfer of snapshots to my web page. filename prefix which is given as input in the MEDIA TYPE setup however gets extended with additional numbers resulting in unique filenames after every transfer. E.g. SNAPSHOT1320703730_3939.jpg where filename prefix is SNAPSHOT. This makes it challenging when an URL contains a reference to the same file name, and the file names changes over time. Which calls for name manipulating through script or similar.
View 5 Replies
View Related
May 13, 2013
I just bought a DCS-2130 for outdoor use (city landscape through my window in the nineteenth floor), and I'm trying to get it work during the daylight, but I'm having some problems.It seems like this camera can't handle direct sunlight, and in these situations the image gets blurry, even when I set the exposure to auto with max of 0dB in setup menu. Simply there's nothing I can do in this options menu to solve this problem.As the day passes by (and the sunlight gets weaker), the image gets better 'til the night, when it's perfect.What I need to know is if there is any way to setup it properly for daylight use. Is there possible to setup these exposure parameteres some other way, like editing an .ini file or something like that? Or this expensive camera simply can't handle this?
View 7 Replies
View Related
Dec 1, 2012
I've just bought a dcs-2130. Any tips on setting up. Win7 and android based devices and any pointers to any firmware upgrades?
View 5 Replies
View Related
Feb 25, 2013
I have 3 cameras. all had the problem that after a while motion detection would be triggered continuously for no reason at all. With 2 of them I managed to fix it with a firware update, but no luck with the 3rd one. I even tried several different firmware versions.) it starts to record continuously after abt 24-48 hrs & i have to reboot to get it to stop.
View 1 Replies
View Related
Nov 2, 2012
I have been having no luck with DLink support getting an answer. I have the DCS-942L which allows me to set the date/time zone but when I try to add motion detection settings the page always times out during the save. I tried using CaT-5 CABLE instead of wifi for settings (camera on same router and desktop pc) but after the "saving" message appears, it eventually times out and I have to click the Back arrow to return only to find none of my settings saved. I also want to note that each time I log in I see a broken certificate error message. Using Win8 with IE10. Also tried on Win7 with IE9 and XP Pro with IE8.
View 3 Replies
View Related
Apr 2, 2011
First of all, I've purchased a couple of Wifi cameras in the past, and they've always been missing something important (i.e. just returned a Cisco camera because it didn't support WPA2-AES).
So I was thrilled when I first received the DCS-930L - it was sleek, wireless setup was easy, and mydlink.com is slick as well.
But I'm afraid I've found the fatal flaw. I purchased this camera for one reason only - to figure out how mice are getting into my basement! I set up the camera where I suspect they're coming in, set up motion detection (via ftp), and then walked in front of the camera to test it.
To my surprise, I checked the FTP folder and found dozens of STILL images! What I really need is a video file. Is there NO way to configure the camera to capture video (not still images) when motion is detected? This seems like a huge gap. The Cisco camera I returned could do this.
If it can't do this, can it can be configured to record the last X hours to a shared drive somewhere, so I can at least go back and look at recorded video?
View 1 Replies
View Related
Mar 3, 2013
1. To monitor motion in a block you hash it.
2. To monitor motion in a block you leave it clear.
View 3 Replies
View Related
May 30, 2012
I have a 932L already and wanted to add another camera, so I purchased the 942L in the US. I live in Canada. The 932 works perfectly, emailing me without any problem. Set up was a breeze. This new camera appears to be a problem. I cannot get this turkey to email. I am very computer literate, and I have been working on this thing for ages now without success. I would like to return this thing and get another 932, but hard to do from here. I see from these forums that nobody else appears to have gotten it to work either. By the way, I upgraded it to the latest version firmware, no change. How to email images using the motion detection?
View 2 Replies
View Related
Dec 11, 2011
I have been testing my new DCS-942L and found that while the motion detection works great it is sometime hindered by the audio mic setting of motion detection. I have turned down the microphone settings to the lowest (10) and the only difference is miniscule. The camera will still set off the motion detection prior to anyone being in the screen, and if the person enters the screen immediately after the noise the camera will not record the movement.
I have adjusted the sensitivity down to 25% and continued having the issue. I would like to record motion with sound. So either the microphone needs to be able to be adjusted lower, or not set off the motion detector.
View 1 Replies
View Related
Nov 21, 2011
I am using my new DCS-930L to monitor motion at a door entrance. It is firing off when motion happens but the image it emails is taken @ 12 seconds after the motion. So the result is I know motion happened but the person who came to the door is long gone or through the door by the time the image snapshot is taken. I get multiple emails containing images of the empty entrance. Is this a software, hardware, firmware or user error issue?
View 7 Replies
View Related
Mar 8, 2011
I realize that this is a new product, but nevertheless I have some feedback after running my 4 new DCS-930L camera over the past few days.
Currently, you can configure the camera to EMAIL/FTP images on a schedule or when motion is detected, but not both.
Why does it matter? Because I get flooded with email alerts after I get home from work and later in the evening every time I walk by one of the cameras or whenever a light switch is turned on/off.
If I could configured the motion detection to only alert during a specified schedule of days and hours, it would be great!
View 14 Replies
View Related
Aug 2, 2012
I'm puzzled that you don't seem to be able to do this (a basic feature). Seems like when motion is detected you can only send an email or do the DI/DO thing.
I can do this quite well via the direct web-based interface (1.03 and earlier at least) on the DCS-1130, but the 932L doesn't have video record on motion option (baffled as to why not there too, but that's another issue). So, I was thinking of using the DCS software to get motion-detected recording out of the 932L, but looks like I can't do that either?
View 1 Replies
View Related
Aug 19, 2012
When activating the option to send mail when motion is detected I am receiving mails permanently while I am at home and walking through the zone observed by the camera.
View 3 Replies
View Related
Jan 24, 2013
Region : Canada
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3.12.22 Build 120424 Rel.39632n
I have a WR842ND with firmware 3.12.22 Build 120424 Rel.39632n. I can't seem to get the mail log emailed out. I've tried hotmail, gmail and ISP email ids. I know these will work as I've done it with my NAS and other routers. When I'm in the System Tools/System Logs/Mail Settings I have authentication enabled and I know I've put in the proper information including mail server outgoing mail names EG. smtp.live.com for hotmail.
I don't see any place to identify a non standard port IE. not port 25, to use. So when I try to send I get the Userid or password is wrong message. Do I have to configure something else.
View 5 Replies
View Related
Nov 29, 2012
How to configure LMS to send E-mail or Alert Notification when the CORE SW <6500> and CORE ROUTER <ASR 1004> goes down or it Has some Critical issues.
View 2 Replies
View Related
Aug 1, 2011
Is it possible to have email notification when a rule is hit on the ACS(5.1)?
Ive had a look around and cannot see any options, the server team seem to think its not possible to have this triggered from AD either on a side note, where are the SMTP settings on the ACS?
View 2 Replies
View Related
May 11, 2012
I asked a question recently about accessing camera via a smartphone but I realize that's not really the correct question. The smartphone works fine locally with wifi and has a browser available.
The real question I have is what is the easiest way to access any camera via a browser from a remote location. Years ago tech friend assisted me access my DCS-910 using dyndns.org. It was free and worked great. I guess it went away when they started charging for a basic account.
Is there an easy way to access a camera without using dyndns even if it involves putting in an IP address instead of a convenient domain name? I would just like to see at least one of my cameras in a browser off-site. If I have to pay $20/year for dyndns I can but I would prefer not to if possible.
View 2 Replies
View Related
Mar 12, 2012
Cisco works LMS 4 is very complicated tool for me and it is very hard to configure any cisco device what I need to monitor.Currently I have 3750-X configured, properly discovered and added to DCR. I would like to receive SMTP messages(mail) from LMS if some event occurs. For example when link UPDOWN occurs or when LOGIN_FAILED occurs and so on. I tried to configure it in Monitor > Monitoring Tools > Fault Monito, but without siccess. LMS tell me that there are no devices available.How can I configure some notification so it is able to send me message via smtp?
View 0 Replies
View Related
Apr 5, 2011
Our customer has an ASA5520 Security appliance, I have already config the remote vpn in asa , user can logon via internet by vpn client and can access internal network,customer hope us can make some configuration if the remote user logon asa by vpn and notify them someone login their vpn by email .
View 2 Replies
View Related
May 14, 2011
Is there a way to configure an email notification for a specific authentication failure? Specifically, I'd like to see if I can have an email notifcation sent to me when failure reason is "13017 Received TACACS+ packet from unknown Network Device or AAA Client".
View 1 Replies
View Related
Aug 2, 2011
i cant send an email from my yahoo email.
View 1 Replies
View Related
Jul 30, 2011
I am having almost an Identical issue. It seems that I can do anything I want on the internet, but the second I open hotmail all the problems start. Issues occur on both FF and IE. As with you I am able to continue to get some information on sites that are currently open (for example I will get incoming IMs, although I cannot send replys, and my stream on facebook continues to update). Once this happens I cannot open any new webpage or use the wireless on ANY other device in my house (iphones and printer); wired devices seem to have no issues. I have done everything as far as resetting, updating firmware etc to my router with no luck. I have a netgear dual band router, computers with Windows 7 64bit. It seems that accessing Hotmail on the iphones does not trigger the same issue...
View 4 Replies
View Related
Oct 19, 2012
ican receive e-mail, but I cannot send it.
View 1 Replies
View Related
Sep 29, 2011
I can't send my email using my laptop
View 2 Replies
View Related
Jul 12, 2011
Mail in yahoo alwaysworked until recent Sunday . Now can receive email but not send in yahoo Yet a sent copy is saved in my sent box. but my recepients do not get the mail
View 1 Replies
View Related
Mar 6, 2011
Ever since I upgraded to the netgear WNR2000v2 router, I can receive email but not send it.
View 2 Replies
View Related
Apr 16, 2011
Im using WCS v7.0, I want wcs to send me an email when an AP goes down. Is it possible to do it on wcs? If so, how?
View 1 Replies
View Related
Nov 19, 2012
Server Error: 550 emails blocked from send.
View 1 Replies
View Related
