D-Link DCS-942L :: Sound Detection For Motion Sensor
Dec 11, 2011
I have been testing my new DCS-942L and found that while the motion detection works great it is sometime hindered by the audio mic setting of motion detection. I have turned down the microphone settings to the lowest (10) and the only difference is miniscule. The camera will still set off the motion detection prior to anyone being in the screen, and if the person enters the screen immediately after the noise the camera will not record the movement.
I have adjusted the sensitivity down to 25% and continued having the issue. I would like to record motion with sound. So either the microphone needs to be able to be adjusted lower, or not set off the motion detector.
View 1 Replies
ADVERTISEMENT
Nov 2, 2012
I have been having no luck with DLink support getting an answer. I have the DCS-942L which allows me to set the date/time zone but when I try to add motion detection settings the page always times out during the save. I tried using CaT-5 CABLE instead of wifi for settings (camera on same router and desktop pc) but after the "saving" message appears, it eventually times out and I have to click the Back arrow to return only to find none of my settings saved. I also want to note that each time I log in I see a broken certificate error message. Using Win8 with IE10. Also tried on Win7 with IE9 and XP Pro with IE8.
View 3 Replies
View Related
May 30, 2012
I have a 932L already and wanted to add another camera, so I purchased the 942L in the US. I live in Canada. The 932 works perfectly, emailing me without any problem. Set up was a breeze. This new camera appears to be a problem. I cannot get this turkey to email. I am very computer literate, and I have been working on this thing for ages now without success. I would like to return this thing and get another 932, but hard to do from here. I see from these forums that nobody else appears to have gotten it to work either. By the way, I upgraded it to the latest version firmware, no change. How to email images using the motion detection?
View 2 Replies
View Related
May 31, 2012
I've just successfully set up my network camera and as I was running through the advanced settings, what it wants from me when it comes to setting up images being sent to my e-mail. I've looked up some old threads to get a clue and thus far nothing works. Testing my entries results in "Invalid e-mail setting" 10 out of 10 times.
The setting format I'm trying to use is as follows:
-- smtp.gmail.com
-- 587
-- myemail@gmail.com
-- myemail@gmail.com
-- myemail
-- mypassword
-- STARTTLS
My GMail account is POP Enabled (whatever that is) and I used the username for that e-mail for bother the Sender and Receiver fields, as well as that e-mails username and password.
I'm lost. I bought the camera so I could document my landlord's maintenance people "touring" my apartment while I'm at work, but I wasn't aware having it save screenshots would be so complicated.
View 2 Replies
View Related
Apr 2, 2011
First of all, I've purchased a couple of Wifi cameras in the past, and they've always been missing something important (i.e. just returned a Cisco camera because it didn't support WPA2-AES).
So I was thrilled when I first received the DCS-930L - it was sleek, wireless setup was easy, and mydlink.com is slick as well.
But I'm afraid I've found the fatal flaw. I purchased this camera for one reason only - to figure out how mice are getting into my basement! I set up the camera where I suspect they're coming in, set up motion detection (via ftp), and then walked in front of the camera to test it.
To my surprise, I checked the FTP folder and found dozens of STILL images! What I really need is a video file. Is there NO way to configure the camera to capture video (not still images) when motion is detected? This seems like a huge gap. The Cisco camera I returned could do this.
If it can't do this, can it can be configured to record the last X hours to a shared drive somewhere, so I can at least go back and look at recorded video?
View 1 Replies
View Related
Mar 3, 2013
1. To monitor motion in a block you hash it.
2. To monitor motion in a block you leave it clear.
View 3 Replies
View Related
Nov 21, 2011
I am using my new DCS-930L to monitor motion at a door entrance. It is firing off when motion happens but the image it emails is taken @ 12 seconds after the motion. So the result is I know motion happened but the person who came to the door is long gone or through the door by the time the image snapshot is taken. I get multiple emails containing images of the empty entrance. Is this a software, hardware, firmware or user error issue?
View 7 Replies
View Related
Mar 8, 2011
I realize that this is a new product, but nevertheless I have some feedback after running my 4 new DCS-930L camera over the past few days.
Currently, you can configure the camera to EMAIL/FTP images on a schedule or when motion is detected, but not both.
Why does it matter? Because I get flooded with email alerts after I get home from work and later in the evening every time I walk by one of the cameras or whenever a light switch is turned on/off.
If I could configured the motion detection to only alert during a specified schedule of days and hours, it would be great!
View 14 Replies
View Related
Dec 4, 2011
I recently set up two cameras. I had set up one for motion detection and email to a gmail account. It seemed to work fine, but then for some reason the motion detection tab didn't show the room like it did before. It doesn't show any picture or anything like it did before, so I couldn't choose the squares to choose the detection area. This is through mydlink account->camera info->advanced settings, and logging in to the camera remotely.So I switched to the other camera, and got it working as of last week. But now, the motion detection doesn't work anymore? It appears to be related to the username/password for the email account. I can no longer send test emails, it says invalid username/password, though the exact same values worked last week, and I didn't change anything. I tried resetting it, then setting it again, but no luck.
View 5 Replies
View Related
Jul 29, 2011
The idea is to get the date/time logged motion detection is triggered on a certain time frame of the day (5:00 am to 5:30 am), to a txt file or something like that. I plan to port the log to a html/php website.
View 1 Replies
View Related
Aug 2, 2012
I'm puzzled that you don't seem to be able to do this (a basic feature). Seems like when motion is detected you can only send an email or do the DI/DO thing.
I can do this quite well via the direct web-based interface (1.03 and earlier at least) on the DCS-1130, but the 932L doesn't have video record on motion option (baffled as to why not there too, but that's another issue). So, I was thinking of using the DCS software to get motion-detected recording out of the 932L, but looks like I can't do that either?
View 1 Replies
View Related
Aug 19, 2012
When activating the option to send mail when motion is detected I am receiving mails permanently while I am at home and walking through the zone observed by the camera.
View 3 Replies
View Related
May 16, 2013
i still play with the motion detection feature of the 942L. Is there a way to see where on the live-picture the motion is detected?I do not see any motion on the srceen but the cam still detects motion and records every 60 seconds. Also i played with the sensitivity but without success. So i had the idea to ask the cam where on the screen the motion was detected...
View 1 Replies
View Related
Jun 2, 2012
Motion detection is setup - and I can see in the log and on the Live Video "Motion Trigger Indicator" that this part is working. I can also send test-emails, so the smtp is set up correct. In the Event Setup I have a valid server and a motion triggered event with the status ON. But no emails are sent . In the log there is also no indication of the server trying. Am I missing something - or is this not working for anybody?
And - there is no firmware beyond 1.0 for this model as far as I can see.
P.S. I am using a Gmail account for smtp, port 587 and using startTLS to send with,
View 1 Replies
View Related
Nov 9, 2011
On my new 942l, after 5 days of usage and tinkering with various settings, I cannot get the camera to obey the trigger=motion when configured to send snapshots over email. It does work when configured to send snapshots over email with trigger=always.Interesting enough the trigger=motion works just fine to upload snapshots to FTP. Yes, it uploads the pictures correcty on FTP detecting correctly movements, but it would not send those over email. To me it looks like a bug in the firmware that I have now a 100% repro.Are there any logs you want me to send to you for debugging?And : Is there a known workaround I can apply (reboot, resetup etc)?
Detailed description of the problem:I have setup the camera to upload snapshots to FTP AND send them over email for trigger=motion.This is what works : the snapshots are nicely uploaded on FTP , but not sent over email.Interesting : if I set trigger=always, snapshots will both be uploaded to FTP and sent over email. The moment I switch back to trigger=motion they go only to FTP and not over email.Even more interesting : the video clips work correctly with either email or FTP for trigger=motion.
What could cause this?The email (account, port, password) and FTP settings are definitely not a problem since I see pictures/videos in email or FTP with trigger=always.The motion settings are not a problem either since snapshots upload correctly on FTP when movements are detected.What it apears to be is the software is not reading or obeying correctly a certain combination of settings.I'm wondering if it has to do with the fact that for video clips the "email" and "ftp" are exclusive, but for snapshots they are allowed simultaneously. And somehow the logics get mixed up causing certain combinations of settings to now act out?
What else I tried?I tried many reboots, unplug followed by plug back in and so on.I tried saving and restoring the settings to/from a file hoping that will "reset" something.And I tried many combinations of settings, including changing the order I set and unset hoping a different code path that works will be hit.I did not try a restore to factory defaults since I installed the camera in a hard to reach place and if I restore to factory defaults i need to take it down connect it to a cable in order to redo the wifi settings.
View 7 Replies
View Related
Mar 10, 2012
I have my 942L set up for continuous recording. When I look at the files, the camera will record between 20 and 55 seconds, end that file and start another. The next file then starts between a few seconds and as much as 40 seconds later leaving a gap in the video recoding. The file sizes are all different and the amount of record time is different for each file.
Also, about 80% of the time, the time increments a few seconds on a playback and then stops updating even though the video is longer.
View 4 Replies
View Related
Aug 5, 2012
I just got the camera today, looks good, works good, at least so far.. BUT I was SURE this camera had a battery and charge function!? What's the point of having this camera if I can't place it say inside my car or in the garage (where it needs to be hidden, alas I can't use any cords!)?
View 5 Replies
View Related
May 5, 2011
i was playing back the recording,when i skipped ahead, the sound disappeared. I am recording 10 hours worth everyday, most of the time i just need to skip to a certain time to see and hear what was going on,
View 2 Replies
View Related
Mar 29, 2011
I didn't get a reply with this question lost in another thread so I thought I'd try again. As far as I can tell the 2121 has an extremely weak microphone. I can barely here it 'live'.
The biggest problem is that when I record it the the Main Console program I hear nothing on playback. Does anyone have a DCS-2121 camera that records sound properly so it can be heard on playback using the standard D-Link software program?
View 2 Replies
View Related
Dec 20, 2012
I have a DCS-932L camera setup in my living room with motion detection activated in DView. During the day it works great, but after nightfall the camera shows random lines in the [poor] video. These lines are being picked up as motion and as such the camera records all night long taking up massive amounts of disk space. Even when I put the camera motion detection on 'lowest' value, it still picks it up.
View 10 Replies
View Related
Apr 20, 2011
It seems that motion monitoring setup for 930L is not working correctly.I've setup the camera to ONLY monitor the half of the screen, but it is still monitoring the other half of the screen as well.I've setup the camera to FTP the messages when motion is detected, and it is uploading the images when the other half contains the motion.
View 6 Replies
View Related
Feb 25, 2013
I have 3 cameras. all had the problem that after a while motion detection would be triggered continuously for no reason at all. With 2 of them I managed to fix it with a firware update, but no luck with the 3rd one. I even tried several different firmware versions.) it starts to record continuously after abt 24-48 hrs & i have to reboot to get it to stop.
View 1 Replies
View Related
Jul 3, 2012
When I am viewing live recorded video through d-viewcam I can hear the audio. I currently have 2 camera recording 24/7. When I go to playback to play a certain clip, there is no sound at all. When I save a clip and click export audio, still no sound.
View 4 Replies
View Related
Feb 17, 2013
Region : Romania
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : latest
ISP : RDS
I am experiencing an issue since I bought my new laptop.I connect to the Internet with Windows 8 and TL-WR1043ND.My issue is that ever since I installed the printer utility from the site I hear an ON/OFF sound in my speaker randomly and I can not figure out what`s wrong.I think it`s trying to search for my printer but it it off.Also wi-fi disconnects randomly ever since this application was installed.What can I do to fix this issue.Computer works fine without the application.There is no report about this issue in the Event Viewer.
View 4 Replies
View Related
Nov 28, 2012
Primary optical link between CPE and PE, and backup 3G/ADSL link between CPE and PE.I am considering link failure detection on primary link (after which backup link should take over). Which method is the least CPU intesive:
1) BGP protocol between CPE and PE
2) RIP protocol between CPE and PE
3) BFD on static routes on PE
Is there difference in terms of CPU load between above mentioned methods or they are more or less the same?Hardver platforms are sup720 BXL and Cisco 7200 G2.
View 4 Replies
View Related
Jan 30, 2012
I have 1.00 build 0522 and searching the support website I see no link. But reading here I see there is a later version.
View 1 Replies
View Related
Nov 10, 2012
The company has a glitch that they are not sure if they will fix so you can't record with mac. I am unable to return my cameras to staples and Im out the money for the memory cards I opened. It says you can record with MAC clearly on the box!!!! Bad business practice for STAPLES and DLINK.
View 3 Replies
View Related
Jul 9, 2012
iphone and android app but no blackberry.
View 3 Replies
View Related
Jan 4, 2013
I just purchased 2 cameras and have one set up.
Firmware V 1.12
Works great on my android phone and connects fairly quick. When I try to see the camera image on my PC with windows 7 64 bit, I log into my d-link and it shows the camera name on left side of screen, then says Java run time environment not installed.I uninstalled java 5 times and re installed both 32 and 64 bit but keeps coming back as not installed. Camera is set up wirelessly through a Belkin router, so far no EZ config
View 8 Replies
View Related
Mar 27, 2013
Is there such a possibility in the firmware or through telnet?
View 3 Replies
View Related
Apr 13, 2012
As DCS-942L IP cam is compatible with "NVSCGI APIs" (search this string on a search engine and you will find some useful PDF docs), many features of this IP Cam may be enabled or disabled using any web browsers, for example we can manage the motion detect.
[url]....
View 3 Replies
View Related
Dec 18, 2012
I just bought new 942L (HW Rev3, 1.12 FW) and the only profile which is used to stream to iPhone or Web browser in mydlink is profile 3 which is limited to JPEG. Is there some way how to change the profile to be used for streams or is there a way how to make to profile 3 something else then JPEG?
View 1 Replies
View Related
Apr 19, 2012
I have 3 DCS cameras on my network all setup WiFi
2 are DCS-932L and 1 DCS-942L
The DCS942 (which is right near but facing the other direction) is about 2 meters away from one of the 932's but the 942 keeps going offline - it comes back on and off probably 4-5 time during a 24hr period.
This is most frustrating - it would look like Wifi signal strength could be the issue but the other 932 right near it doesn't have this issue?
View 1 Replies
View Related
