No Internet Connectivity Wired Or Wireless?
Dec 9, 2011
Had a virus that I cleaned on my laptop. After virus removal I can connect to my FIOS router both wired and wireless but cant get to the internet. Can ping laptop and laptop can ping desktop. I have no issue on my desktop machine getting to the internet only issue is with laptop. I have disabled/removed all apparent firewalls/antivirus. Using Windows XP SP3 and both Firefox and IE. Proxy is off in Firefox and IE. . Have reset network adapters. Network adapters are set to get DNS and IP automatically. IP Config shows IP address and the DHCP and DNS Server addresses are correct (FIOS Router). Windows Firewall is disabled. Something is stopping me from going outside the local network.
View 3 Replies
ADVERTISEMENT
Sep 12, 2011
[code]....
I've been trying for two weeks now to connect to the internet but can't. This suddenly happened on a Monday after I got home from work. Up until that point, I have had no problems. At first I thought it was my cable, but when I plug the cable into my brother's PC, it works. Then thinking it could be my network card, he picked up a wireless card for me, but still no go. I've searched these forums and many forums over the internet and tried many things but I still have no luck. I've scanned for viruses and malware but nothing has turned up.
I have Norton anti virus but installed Adaware per recommendation to double check. I also used Malware Bytes. On Xirrus, I clicked the ping test and everything showed as pass but still, low connectivity. I get that even when I plug in the cable. When I look at my connection status under activity, the bytes sent and received are in the low thousands.I have only a very basic understanding of networks. [code]....
View 4 Replies
View Related
Jun 24, 2012
My Dlink DIR-655 is hardware ver B1 and firmware 2.00. I found the UPNP cannot cross between wired and wireless network. It is fine if both UPnP server and renderor are on either network. There is no problem on other protocol, such as SAMBA from my notebook connected via Wireless to the QNAP NAS connected via Wired to the 655.
View 9 Replies
View Related
Dec 30, 2011
From my company for a new line of work I started. Was "deep frozen" when I got it and was useless to me in that state. Got it thawed and it suddenly wanted to do loads of updates, so I let it. Apparently I was not careful enough & got the "XP antivirus 2012" malware.Eventually conquered that beast and installed avira free.almost immediately avira picked up on the "html/infected win.gen2" malware.I quarantined, deleted, scanned comp. w. avira, rkill, & malwarebytes. all scans came up clean but I now have no connectivity. wired conn. continually tries to acquire network address and w.less has limited or no.Not my router or modem as I have 2 home comps actively cnctd as I type this. Also tried multiple other networks w. same neg. results.After loads of searching and t/s'ing I believe I have found the root of the problem: When I look under "services" I found that "netbios helper", "Network Location Awareness" & "dhcp client" are all not started.
Trying to start them results in failure b/c some "dependencies are marked for deletion". the afore-mentioned 3 things are dependent upon the Netbios over tcpip and tcpip protocol driver. Those drivers are in the system32/drivers folder but I cannot find a "non plug and play" section in the device manager.Yes, I looked under "hidden devices" and I looked in every drop down. I successfully cmd: netsh int ip reset c: esetlog.txt but when I tried to reset winsock I got winsock is not recognized as an internal or external command, operable program or batch file.I have no reboot disk or thumb drive and bios is p/w'ed so I can't wipe the slate clean and start fresh. Is there anything I can do short of giving it to the "IT guy" at work? That's a black hole I'd really like to avoid if possible.
View 3 Replies
View Related
Jul 29, 2012
I've got a Brother 5490CN network printer. For the past year, it has been sitting next to my router and plugged directly in. Due to changes in how my service enters my home, the router needed to move to another location - a location that is inappropriate for the printer.
View 4 Replies
View Related
Aug 30, 2012
I have 300Mbps PCI wireless LAN network card which I installed in my PC and until today I was connected to my Sky router wirelessly. I also have a wireless Brother all in one connected to the same PCI card.
The engineer who installed my Sky fibre broadband told me in order to achieve maximum speeds I should connect via an ethernet cable to my Sky router as wireless could be a lot slower so I bought one and connected up and disabled the wirelss card. All good so far until I noticed my Brother all in one was complaining about no network ID.
My problem is that I can't seem to run my printer wirelessly as well as run my broadband wired. If I enable the wireless adapter the printer works but my broadband is wireless as well and the wired connection is disabled.
View 5 Replies
View Related
Oct 19, 2012
I have an equipment which has LAN port for wired connectivity to the computer. I can connect 10 such equipment thru LAN to the computer & display the data of all the equipments on computer screen. This LAN network I wanna convert to Wi-fi/wireless.
View 4 Replies
View Related
Jun 19, 2011
I have a wireless network and I have a new TV that has wireless and wired connectivity. I do not have a wired port at the spot where the TV is mounted so I am connecting wirelessly. The problem is the wireless on the TV is pretty flaky and I cannot get consistent connectivity..and every time it can't connect I have to retype in the AP passwords as it doesn't remember them. I would like to switch the network to wired, but can't run an actual wire. Can I add a new wireless AP as a repeater or bridge to tap into the existing wireless network and then connect the TV to the a wired port on the wireless router?
View 10 Replies
View Related
Mar 29, 2011
My wireless show connected connection give me a 'limited or not connectivity' but a wired connection has no problem?
View 2 Replies
View Related
Apr 21, 2012
I have a Linksys E2000 router that is connected to my cable modem. I have a desktop computer that is connected to the router via an ethernet cable, and two laptops in the house that connect wirelessly to the router to get internet access.
This morning, all devices were connected to the internet just fine. I stepped away for a few hours and during that time the desktop 'lost' its internet connection. I have tried re-booting the router and removing-reconnecting the ethernet cable but nothing is restoring the connection.
The fact that my wireless devices are connecting means my internet service is fine, right? So what is preventing the desktop from gaining a connection?
View 1 Replies
View Related
Feb 24, 2011
Ive had this 655 for about a year now and it has been rock solid. But, there has been one slight issue.
And and all wireless devices can see each other and all wired devices can see each other....but the wired cant see the wireless and vis versa.
The wireless devices (W7 and Vista laptops) can see the wired devices when they are plugged in. But my phone and Galaxy Tab can only see whatever wireless devices there are (cant be plugged in). Even my wired Samsung TV cant see the shares on the Tab or wireless laptops (and vis versa). So, its certainly not a firewall or OS config issue.
Now, I made sure they are all connecting via the main SSID and not the "isolated" Guest SSID....but its acting like the main SSID is isolated from the wired LAN somehow.
Firmware 1.34. IPs for the wired and wireless devices are all in the 1.2 - 1.50 range.
View 14 Replies
View Related
Dec 28, 2011
I just connected a WRT190N v2 Wireless Router to my XPS 400. When my wife tried to connect our other desktop to the wireless network, everything seemed fine. I noticed that, when she wasn't actively browsing or using the network, her computer would lose connectivity, but regain it when a browser was opened. When I tried to use the XPS, I found that it had no connection. I regained connectivity after using the Windows Network Diagnostic tool, but neither computer seems to keep connectivity when left alone, at least for very long.
View 1 Replies
View Related
Aug 6, 2010
As I continue to have various issues with my revision A version of the DIR-825, does an updated firmware is in the works? Or has revision A been DE-supported by Dlink?
I'm still having issues with: Share port printer no longer being recognized/usable until router rebootedLoss/overload of router which causes all clients (wired and wireless) to loss connectivity Router rebooting itself periodically
View 4 Replies
View Related
Mar 5, 2012
I am experiencing an issue with a LAN connection on my Desktop computer running Win 7 x64 with an NVIDIA nForce Networking Controller. I am receiving a "Limited or No Connectivity" message but I know the Router and LAN cable are good as I can plug it into a laptop sitting right next to me and do not experience any issues.I have checked the original manufacturers website for drivers however they do not offer any for Win 7. Trying the Vista x64 drivers results in the same limited connectivity issue.Hardware Specs I have on the Computer:
- Shuttle SN68SG2
- NVIDIA GeForce 7025
- 7 Series Glamor small form factor XPC Barebone
I have also tried the latest drivers from NVIDIA with the same results. [code]
View 2 Replies
View Related
Jul 8, 2011
I have an Internet Connectivity problem which I believe was caused by resetting our D-Link WBR-2310 router. We have a strange, perhaps illogical network setup in our office. Although it was set up before my time, I have figured it works as follows:
(1) A wired/wireless router (let's call it Router A) is connected directly to the DSL modem.
(2) An Ethernet cord runs from this router to a 5 port switch.
(3) 4 cords run from the switch to individual workstations. These computers obtain their IP addresses automatically.
(4) 1 cord runs from the switch to another wired/wireless router (let's call it Router B).
(5) Two cords run from Router B to individual workstations (let's call them Workstations C). These computers used permanent IP, subnet mask, default gateway, and DNS server addresses. I understand that this was done because they could not obtain their IP addresses automatically.
The problem I've caused seems to stem from me resetting Router B to the factory settings while trying to secure its signal and changing its IP address from 192.168.0.1 to 192.168.1.1 (in order to avoid conflict with the modem which has the same IP address). Once I did that, Workstations C could not access the Internet.
I have tinkered with the TCP/IP settings for Workstations C (e.g. by changing the default gateways to the Router B's new IP address), but it doesn't work. What else should I be doing?
View 2 Replies
View Related
Jan 17, 2013
In my LAN one of my computer is shown limited connectivity
View 1 Replies
View Related
Jun 12, 2012
I found out my onboard ethernet port was fried, so i went out an bought a RTL8139D ethernet PCI adapter. I fitted the adapter and plugged my cable in. It said Limited or no connectivity. After hours and hours of googling I tried everything. I changed the protocols, created static Ip's went into cmd and reset winsock catalogs, release/renew etc. The cable I am using worked previously in my room and it still works. (I took a laptop up to my room and plugged in the cable and had internet connection). So... I took my PC downstairs and used a different cable. This successfully connected me to the internet. That Rules out that my new ethernet card is the problem. MY cable also allows others to connect to the internet. Windows 7 64X Ultimate edition.
View 1 Replies
View Related
Jul 3, 2011
A few days ago my desktop (which is hardlined into a router) lost all connectivity. My wireless connections work fine and i have began basic troubleshooting; changing ethernet cables, taking router out of the mix, etc. Beginning to think the ethernet port on pc is going out (NIC card?). Funny thing is, it will come back intermitantly for 10 minute increments. power cycling does nothing.
View 8 Replies
View Related
Nov 9, 2012
I reformatted using an old XP disc, Got the Ethernet Driver set up fine, but now I can not connect to the Internet, because the card refuses to fetch the DNS Addie, and default gateway, it's the only computer in the house having issues, the computer I am having problems on is an old Hp Dv 9317cl series, with a nivida chipset Ether card.
View 3 Replies
View Related
Mar 30, 2011
I have one HP Desktop that decided one day it doesnt want to connect to the internet.
On the network we have two HP desktops (wired), one Dell desktop (wired) and 2 dell laptops (wireless) all connected to a wireless D-Link DIR 655 router . All computers are running Windows XP. All are able to connect to the internet except one HP desktop (only recently).
I have tried connecting the HP desktop in question to the wireless router via a different cable and still no connectivity. I tried disabling and renabling the internet/repairing it to no avail. I've restarted the wireless router and modem. Nothing. I've even tried restarting the computer (who knows it's solved problems before).
View 14 Replies
View Related
Mar 17, 2012
So, I reformatted using an old XP disc, Got the Ethernet Driver set up fine, but now I can not connect to the Internet, because the card refuses to fetch the DNS Addie, and default gateway, it's the only computer in the house having issues, the computer I am having problems on is an old Hp Dv 9317cl series, with a nivida chipset Ether card.
View 3 Replies
View Related
Jul 19, 2011
I just purchased the N600 DB Wireless Router with my ISP (Road Runner) I can connect wireless thru a laptop and a tablet, but when I try to connect wired(LAN) thru desktop (XP Pro SP3) I receive the Limited or No Connectivity. If I bypass the router and plug straight into the cable modem I can connect without issue. I have tried resetting the router, modem and computer to no avail.
Here are the results for ipconfig and ipconfig /renew C:>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
[Code].....
View 13 Replies
View Related
Nov 3, 2012
I tried using an ethernet cable (cat 6) to connect my laptop (Sony VPC-1190X) to our gigbit router (Netgear N600 WNDR3800), but I get a message that there is no internet connectivity and the light representing that port on the router does not turn on.So, dead ethernet port on the router? Nope - unplugged the working printer from the router and used that ethernet port - same result.so dead ethernet port on the laptop? Nope - plugged the laptop into a gigbit switch (D-link DGS-2205) and instantly got internet connectivity. Note that this switch is plugged into the aforementioned Netgear router.For good measure, I tried power-cycling the router and laptop.
BTW - I can connect the laptop to the router wirelessly but I am trying to make use of the faster transfer speed of the ethernet connection.
View 5 Replies
View Related
Feb 22, 2011
i have a BEFSR41 v3 firmware v 1.05.00 - i have been usuing it for at least 7 or 8 years now - at one time i had 3 computers hooked up and they all three worked fine. Now i have 2 plugged into the router - both are xppro machines - the one i am now works with no problems. The other computer however has the limited or no connectivity problem.I used this router for years without any problems then one day this ip conflict message started to appear.Then one day i started getting this weird ip conflict message on both computers but only occasionaly - it never caused any problems - if you ignored it - it would simply go away.Then one day computer #2 got the limited or no connectivity message - i simple reboot fixed it. This solution worked several times. Computer #1 has never had any problems.
Sometime later the limited or no connectivity problem reappeared and this time a reboot did not work - i searched for a fix and decided to try changing the link speed from auto sense to 10mb half duplex - this solved the problem. This solution worked several times.Sometime after that the limited or no connectivity reappeared and after some searching i upgraded the routers firmware - this solved the problem.Sometime later the limited or no connectivity reappeared and this time i had to actually uninstall the NIC, reboot and then let it redetect the NIC and then the problem was fixed. This solution worked several times.Sometime later the limited or no connectivity reappeared and the previous solutions did not work to fix it - after searching for a fix i discovered that i could simply unplug the router and the plug it back in and this would solve the problem. This solution worked many times.Sometime later (wich brings us to 3 or 4 months ago) the limited or no connectivity reappeared and this time after searching for a fix i was able to fix it by updating the NIC drivers. Problem solved.This brings us to now - the limited or no connectivity has reappeared and none of the previous fixes correct the problem.When i originally set everything up it worked immediately out of the box.
DHCP is enabled - everything is set to obtain an ip address automatically.At first the event viewer reported The IP address lease 192.168.1.100 for the Network Card with network address0xxxxxxxxx has been denied by the DHCP server 192.168.1.1. {The DHCP Serversent a DHCPNACK message}.Now the even viewer just tells me it is using ip address 169.254.xxxxxx - (not the exact message but i didn't wanna go back and look)I have tried all of the previous fixes to no avail. I've tried shutting everything off and turning everything back on - i've tried resetting both the modem and the router - i've tried upgrading the firmware again. I even downloaded LELA and installed it on both computers thinking maybe it would detect and fix the problem buy no such luck. LELA simply tells me that computer #1 is working normally. On computer #2 when i installed LELA the first thing it did was try to find the router and it tells me it cannot find it.I.ve tried ipconfig /release and ipconfig /renew - i've tried it one after the other and also a reboot in between. I've tried clicking on repair in the LAN status - i've tried even tried different cables and switching ports on the router.
View 9 Replies
View Related
Dec 17, 2011
After a recent power outage while my PC was in sleep mode, I don't have wired (Ethernet) connectivity.
I have new Dimension E510XP Media Center Edition, Version 2002, SP3 ver had an issue with wired connectivity on this PC after coming out of sleep mode. Of course, the power failure was unusual.
Observations:
- ipconfig /all shows that I have an IP address
- I can ping the DHCP server listed in ipconfig /all and I also can ping google.com.
- I was going to go a restore point set before the power outage. But, somehow system restore had gotten turned off. Oh, well. I did go ahead and turn system restore back on.
Things I've already tried that did not solve the issue:
- Reboot
- Uninstall/reinstall the network adapter driver. Device Manager says the network adapter card is working properly.
- Looked for an updated network adapter driver on Dell's website. Turns out that I have the latest driver already.
- Followed many of the steps from Microsoft at [URL]
- Checked McAfee Security Center firewall permissions list to see if something got changed. Everything looked okay. Also disabled the firewall just to be sure,
- Disabled SafeEyes internet filter.
- Reset the router. Also swapped router ports with a known good PC. The known good PC still had connectivity, the affected PC (the E510) did not.
View 6 Replies
View Related
Aug 29, 2011
I recent bought an Asus G74SX-A1. While the machine runs like an absolute dream, it does seem to have a networking problem that I have been attempting to address for about a week. In my college dorm there is an ethernet port that carries an active internet connection. When my laptop is plugged into the port via ethernet, I receive no connection (well mostly no connection, every now and then I will connect for a split second allowing me to load my homepage, Google). This problem also exists on my dorm's WiFi. My LAN card is a RealTek BGE Family Controller (PCIe)
However, on my netbook (an Asus 1000HE, which I am typing this post on) everything is fine. I am quick to blame the retailer who sold me the G74SX seeing as they replaced the stock WiFi card with a Bigfoot Killer 1102 card, and my first assumption is that something was not installed properly during my laptop's assembly or that I simply messed up a driver update. I became quite frustrated with the whole situation and in order to find a quick solution I formatted the laptop back to factory defaults.
Something magical happened.For about a day and a half, my LAN card worked. I packed up my gear this weekend and headed back home, and at my parents' house my WiFi card worked wonderfully.I thought my networking woes were behind me, but this was not the case. When I returned to my dorm this afternoon, my LAN and WiFi cards began experiencing the same problems they experienced before the reformat. A third variable of some interest is that I brought my wireless router back to my dorm in order to utilize a less-crowded private WiFi spot and discovered that it worked fine and I was able to connect to the internet on my iPad using my router. This evening, however, my router decided to stop carrying an internet connection as well. I can connect to the router itself, but I cannot receive an internet connection, even on the netbook.
I have tried uninstalling/updating drivers for both the Bigfoot card and the RealTek card to no avail. My best hypothesis is that the problem lies in some setting that both the G74SX and the D-Link DIR-655 have in common, seeing as they are the only wired components that aren't receiving a connection.
Equipment: D-Link DIR-655, Asus G74SX, Asus EeePC 1000HE
View 2 Replies
View Related
Mar 19, 2011
I have a bt wireless modem although it will not allow me to connect to the Internet over wireless although it will though ethernet.
View 1 Replies
View Related
Dec 7, 2011
wireless network connection connected but limited or no connectivity
View 1 Replies
View Related
Jan 25, 2012
I have a client who has 4 computers in the house all running wireless. 2 desktops and 2 laptops. One of the laptops is running XP and after 5-10 minutes of surfing, the internet stops working while all the other computers retain a good internet connection. Repairing the connection via the taskbar icon fixes it temporarily until the issue reoccurs.
View 10 Replies
View Related
Oct 11, 2011
What is the best method of establishing a internet connectivity in rural areas and out of the country? Both wired and wireless with good reliability.
View 3 Replies
View Related
Jul 1, 2011
I have a cable modem with a wireless router attached.There are 2 laptops that connect to the internet via the router. I've never been able to get the hard wired desktop to connect to the internet via the router, so, when the desktop is used, the router is disconnected from the modem and the desktop is connected.I do not have free access to the modem, router or desktop devices, but I do have free access to the 2 laptops.I would like to be able to install on one of the laptops, something that would keep track of the internet connectivity.
I know that even when the router is disconnected from the modem, it is still sending it's wireless signal (most likely) but it's not connected to the internet anymore.So, I would like to be able to know the date and time the router looses internet connectivity and the date and time it gets the connectivity back every time this happens.I would love to be able to monitor the activity that takes place on the internet during that time frame, but know it's not possible when all I have access to is a wirelessly connected laptop that would lose the internet connectivity. So, it would be good just to be able to know when the router is disconnected and how long it is disconnected.
View 1 Replies
View Related
Nov 4, 2012
Ive been running my computer on our home wireless internet connection with almost no problems, but about two weeks ago our internet went down and after it went back up a day later i had very slow internet speed and a very sporadic connectivity (random disconnects, dns timeouts etc) I used to get speeds up to 20-22 mbps but now i can barely push 4mbps, the other computers on our network has fine connectivity its only my stationary computer that has these issues
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Med ensamr�tt.
C:UsersGreattech>ipconf /all
ipconf �r inte ett internt kommando, externt kommando,
program eller kommandofil.[code]......
View 4 Replies
View Related
May 1, 2013
Region : Ireland
Model : TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP : Three Mobile
I have recently purchased a new desktop computer that does not have an internal WiFi card. To remedy this I bought the TP Link TL-WR702N. Currently my access to the internet is provided by a mobile WiFi router (one of these: { URL}, that spreads a wireless signal throughout my house for things like my phone and laptop to connect to. I was under the impression that the WR702N would be able to connect to this network and let my new computer run on it (I believe it's called client mode?)
Now so far I have not been able to get my computer to recognize the existence of the TP Link modem, despite both Ethernet and USB cables being plugged into the computer. I think I need both logging in and changing the mode from AP to client mode.
I emailed support and was given the instruction to read this FAQ [URL], however, when following those instructions, after clicking on "Change adapter settings" instead of reading the router, all I get is a blank screen.
View 1 Replies
View Related
