Limited Or No Connectivity Via Wired LAN - Belkin DB N600
Jul 19, 2011
I just purchased the N600 DB Wireless Router with my ISP (Road Runner) I can connect wireless thru a laptop and a tablet, but when I try to connect wired(LAN) thru desktop (XP Pro SP3) I receive the Limited or No Connectivity. If I bypass the router and plug straight into the cable modem I can connect without issue. I have tried resetting the router, modem and computer to no avail.
Here are the results for ipconfig and ipconfig /renew C:>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
[Code].....
View 13 Replies
ADVERTISEMENT
Nov 3, 2012
I tried using an ethernet cable (cat 6) to connect my laptop (Sony VPC-1190X) to our gigbit router (Netgear N600 WNDR3800), but I get a message that there is no internet connectivity and the light representing that port on the router does not turn on.So, dead ethernet port on the router? Nope - unplugged the working printer from the router and used that ethernet port - same result.so dead ethernet port on the laptop? Nope - plugged the laptop into a gigbit switch (D-link DGS-2205) and instantly got internet connectivity. Note that this switch is plugged into the aforementioned Netgear router.For good measure, I tried power-cycling the router and laptop.
BTW - I can connect the laptop to the router wirelessly but I am trying to make use of the faster transfer speed of the ethernet connection.
View 5 Replies
View Related
Jan 3, 2013
I purchased a new N600 dual band router (2.4 and 5.0 GHz). I set up security to use WPA/WPA2 PSK (AES) on both bands. The devices that can see the 5.0 band could connect without issue, however those devices that can only see the 2.4 band (older devices like the Nintendo Wii, my desktop computer with wireless, and iPhone 4's could not connect). In troubleshooting, I finally disabled security on the 2.4 band and everything connected without issue, but I cant figure out how to successfully enable security on both bands at the same time.
View 1 Replies
View Related
Jan 24, 2011
My desktop is fitted with a Belkin 54G PCI card which I have never had problems with before. My desktop is in the basement and due to poor signal issues another router has been set up in the basement. I had to constantly repair the connection to the previous wireless network but even though the signal is much stonger with the new router and network I am having even more issues with not only having a repair the local only connection issues but also with 'limited connectivity' and the only way to resolve it is to restart my computer.
View 3 Replies
View Related
Mar 5, 2012
I am experiencing an issue with a LAN connection on my Desktop computer running Win 7 x64 with an NVIDIA nForce Networking Controller. I am receiving a "Limited or No Connectivity" message but I know the Router and LAN cable are good as I can plug it into a laptop sitting right next to me and do not experience any issues.I have checked the original manufacturers website for drivers however they do not offer any for Win 7. Trying the Vista x64 drivers results in the same limited connectivity issue.Hardware Specs I have on the Computer:
- Shuttle SN68SG2
- NVIDIA GeForce 7025
- 7 Series Glamor small form factor XPC Barebone
I have also tried the latest drivers from NVIDIA with the same results. [code]
View 2 Replies
View Related
Jan 17, 2013
In my LAN one of my computer is shown limited connectivity
View 1 Replies
View Related
Jun 12, 2012
I found out my onboard ethernet port was fried, so i went out an bought a RTL8139D ethernet PCI adapter. I fitted the adapter and plugged my cable in. It said Limited or no connectivity. After hours and hours of googling I tried everything. I changed the protocols, created static Ip's went into cmd and reset winsock catalogs, release/renew etc. The cable I am using worked previously in my room and it still works. (I took a laptop up to my room and plugged in the cable and had internet connection). So... I took my PC downstairs and used a different cable. This successfully connected me to the internet. That Rules out that my new ethernet card is the problem. MY cable also allows others to connect to the internet. Windows 7 64X Ultimate edition.
View 1 Replies
View Related
Nov 9, 2012
I reformatted using an old XP disc, Got the Ethernet Driver set up fine, but now I can not connect to the Internet, because the card refuses to fetch the DNS Addie, and default gateway, it's the only computer in the house having issues, the computer I am having problems on is an old Hp Dv 9317cl series, with a nivida chipset Ether card.
View 3 Replies
View Related
Mar 17, 2012
So, I reformatted using an old XP disc, Got the Ethernet Driver set up fine, but now I can not connect to the Internet, because the card refuses to fetch the DNS Addie, and default gateway, it's the only computer in the house having issues, the computer I am having problems on is an old Hp Dv 9317cl series, with a nivida chipset Ether card.
View 3 Replies
View Related
Dec 13, 2012
My wifi used to run fine. Now there is a yellow little hazard sign next to the wifi bars and the PC says: Limited connectivity to belkin.758". I cannot connect to the internet!
View 3 Replies
View Related
Feb 22, 2011
i have a BEFSR41 v3 firmware v 1.05.00 - i have been usuing it for at least 7 or 8 years now - at one time i had 3 computers hooked up and they all three worked fine. Now i have 2 plugged into the router - both are xppro machines - the one i am now works with no problems. The other computer however has the limited or no connectivity problem.I used this router for years without any problems then one day this ip conflict message started to appear.Then one day i started getting this weird ip conflict message on both computers but only occasionaly - it never caused any problems - if you ignored it - it would simply go away.Then one day computer #2 got the limited or no connectivity message - i simple reboot fixed it. This solution worked several times. Computer #1 has never had any problems.
Sometime later the limited or no connectivity problem reappeared and this time a reboot did not work - i searched for a fix and decided to try changing the link speed from auto sense to 10mb half duplex - this solved the problem. This solution worked several times.Sometime after that the limited or no connectivity reappeared and after some searching i upgraded the routers firmware - this solved the problem.Sometime later the limited or no connectivity reappeared and this time i had to actually uninstall the NIC, reboot and then let it redetect the NIC and then the problem was fixed. This solution worked several times.Sometime later the limited or no connectivity reappeared and the previous solutions did not work to fix it - after searching for a fix i discovered that i could simply unplug the router and the plug it back in and this would solve the problem. This solution worked many times.Sometime later (wich brings us to 3 or 4 months ago) the limited or no connectivity reappeared and this time after searching for a fix i was able to fix it by updating the NIC drivers. Problem solved.This brings us to now - the limited or no connectivity has reappeared and none of the previous fixes correct the problem.When i originally set everything up it worked immediately out of the box.
DHCP is enabled - everything is set to obtain an ip address automatically.At first the event viewer reported The IP address lease 192.168.1.100 for the Network Card with network address0xxxxxxxxx has been denied by the DHCP server 192.168.1.1. {The DHCP Serversent a DHCPNACK message}.Now the even viewer just tells me it is using ip address 169.254.xxxxxx - (not the exact message but i didn't wanna go back and look)I have tried all of the previous fixes to no avail. I've tried shutting everything off and turning everything back on - i've tried resetting both the modem and the router - i've tried upgrading the firmware again. I even downloaded LELA and installed it on both computers thinking maybe it would detect and fix the problem buy no such luck. LELA simply tells me that computer #1 is working normally. On computer #2 when i installed LELA the first thing it did was try to find the router and it tells me it cannot find it.I.ve tried ipconfig /release and ipconfig /renew - i've tried it one after the other and also a reboot in between. I've tried clicking on repair in the LAN status - i've tried even tried different cables and switching ports on the router.
View 9 Replies
View Related
Dec 25, 2011
I'm trying to set up a wireless network for my parents. I have a Belkin Play N600 router (model F7D8302) that I'm trying to hook up to an Acer desktop running Vista. The modem is a Siemens Speed stream 4100. I have a cable going from the ethernet port of the modem to the modem port on the router. The pc is connected to one of the other four ports in the router. The wireless works fine, but I can't get the wired connection on the desktop working. The Internet light on the modem is not on, but the modem works fine when connected directly to the pc. I've tried power cycling and resetting everything, but it's still not working.
View 9 Replies
View Related
Mar 29, 2011
My wireless show connected connection give me a 'limited or not connectivity' but a wired connection has no problem?
View 2 Replies
View Related
Jul 23, 2012
I have been having some gripes with the above problem for the past few days, connecting several PCs in my office into a network. To cut a long story short, it's a bunch of XP SP2 and SP3 machines with only some of them having these issues. The network consists of two switches and one router with integrated modem and wireless. Internet access is established over that router/ ADSL modem.I have drawn out all the cabling and made all the connections myself, I don't doubt network related hardware one bit. Basically, I had the problem on two PCs, I tested connectivity on that cable with a laptop which didn't have any problems connecting to the network. All the cables are brand new, "straight" connectedC
View 14 Replies
View Related
Mar 17, 2011
i did this and the sign of unable to connect went away, restarted back to it, did it again and it goes away but still no connection. TCP/IP stack repair options for use with Windows XP with SP2.
View 8 Replies
View Related
Sep 3, 2011
my internet is not working on my PC (XP) however the wifi in my house is still on (i can use laptop with functioning internet). The internet status say's "limited or no connectivity" and shows a yellow triangle with an exclamation point in the middle.
View 19 Replies
View Related
Sep 9, 2011
I manage a small office network IP's are generated via a rooter. I need to add a new pc to the network and here is where the problem starts.I have a cable from a HUB in that office which has a splitter 1 way goes to a PC the other is empty. At first i tried connecting the other PC from that splitter but i get the Limited or no Connectivity message on both PCs. If i connect only one of them to the splitter the connection works fine.Now i tried with a HUB, made a Crossover cable from the splitter to the HUB in the WAN port, same deal both PCs get Limited ot no Connectivity. THe strange thing is that if i connect only one via the HUB the same thing happens.I am really out of ideas, my only option left is to connect the PC from the main HUB which means allot of cable posing.
View 3 Replies
View Related
Oct 3, 2011
When using an Ethernet cord, I have no problems connecting to the internet. Also, my iPhone and my Wii have no problems connecting (wirelessly). However, I can't get any laptops to connect to my wireless. I have tried three different laptops and get the same problem, that it can connect to the network but limited or no connectivity.
View 1 Replies
View Related
Aug 28, 2012
I have a spare computer I build. Its a FX-60 on some old asus 939 motherboard. I installed xp in it because I don't have any wireless network adapters that work with linux or Windows 7.I am using an old Linksys WUSB11 Ver 2.6. USB adapter.The computer does have connectivity if I plug in an ethernet cord from the router. Worked fine, fast, was able to install Sp3, etc.I can't get the wireless to work. I get excellent connection strength, but can't actually do anything with it.Since this is XP and I haven't messed around with XP network settings for years, I think I got a bit rusty and spoiled with Windows 7.
View 6 Replies
View Related
Jun 27, 2011
I recently purchased a new Belkin Play Max N600 HD, much different to my old Billion 5100. I'm only on an ADSL connection but will be upgrading to ADSL2 soon.
Anyway I have a Netgear WG602 v3 Wireless Access Point, and I was wondering am I able to put this somewhere else in the house and have it relay the internet connection to my devices (iPhone for example).
I'm in the User Interface of my Belkin Device but I have no clue how to actually set up this Netgear device to act as an AP. I've changed one thing on the Belkin device, not sure if it'll make any difference. I changed the Wireless Band from 2.4Ghz to 5Ghz hoping that it'll strengthen the signal. I've attached a print screen of how the User Interface looks like in case any of the knowing would need some guide to where things are placed. =/
EDIT: Also whenever I'm downloading it's a bit slow. I don't have the fastest internet only 1.5Mbps (150kb/s) but now I'm downloading at about 50kb, and from my computer at about 70kb. =/ These are at separate times.
View 8 Replies
View Related
Apr 22, 2012
I just bought a Belkin N600 USB adapter for my desktop PC. However, after I installed it I only get a "limited connection". I'm a pc novice I've tried everything I can think of. My router is a Verizon Fios Actiontec.
View 1 Replies
View Related
Dec 12, 2012
N600 router will not comunicate with my desktop computer through a cisco switch. The LAN was working fine when I was using a Linksys router. Is this a compatability problem between Belkin and Linksys products?
View 1 Replies
View Related
Mar 4, 2013
Where can I get the setup software for my N600DB USB adapter, I cannot find the CD I got with my wireless adapter.
View 1 Replies
View Related
Feb 13, 2013
I have a N600dp. My printer, Brother MFC-J410W, is plugged into the router USB port. The printer function works but the scanner function doesn't. I keep getting an error message that the printer is not connected.
View 1 Replies
View Related
Mar 27, 2013
Will the N600 Belkin router is DD-WRT compatible, because I saw in a database it is not. Is there also a way to make it DD-WRT compatible, e.g. flashing it ? Do you have a download on the router support side.
View 2 Replies
View Related
Oct 19, 2011
Limited OR No Connectivity.
View 1 Replies
View Related
Jul 19, 2011
used to use Ethernet connection on this pc for 2/3 years, i recently ran wireless for like 2months. every time i try and use Ethernet i get limited or no connectivity warning, I looked in my ipconfig, i notice theres no physical address or default gateway for my realtek rtl8139/810x family fast Ethernet.
View 4 Replies
View Related
Sep 9, 2011
I got the urge to play a Windows game, so I used my restore disks to install XP on my Acer Aspire One A150. Unfortunately, my wireless card does not work anymore (?). I am dual-booting with Ubuntu 10.10 at the moment and my wireless card works there with no problem.I get a Limited or No Connectivity error every time.I'm connected to a router, which I have reset and works okay in Linux. I am connected currently using a USB D-Link N-Adapter, however, despite being "N" is considerably slower and inconvenient.
[code]...
View 13 Replies
View Related
Apr 19, 2011
I just installed a new NIC after troubleshooting old NIC and I am still receiving limited or no connectivity error. I checked router, cable modem & cable; all work fine.
View 13 Replies
View Related
Jan 25, 2013
I got this message and I went up to the " Start-Run_CMD-IPCONFIG and this is what I got Ethernet adapter Local Area Connection Media State....... Media Disconnected,Ethernet adapter Wireless Network Connection
View 1 Replies
View Related
May 27, 2011
I've searched the forums and found similar problems that relate to mine but after trying done of their solutions with no success I decided to make a new thread. This problem started 2 days ago with the same network I've been using for about 2 months.I'm running vista sp 1. I use google chrome and when I try to open a page it says unable to connect to proxy server. I changed the lan setting s (unchecked the box for using a proxy server for my lan) and now the page says the dns lookup failed.
View 1 Replies
View Related
Jun 30, 2012
I have a laptop running XP that will connect to the router wirelessly but not the internet. We have a static/fixed IP that I think may be the problem. Im not sure what the IP address is. Do I need to manually enter this (and DNS settings) into wireless connections > properties > TCP/IP, Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp.
View 9 Replies
View Related
Jan 30, 2012
I usually bring my laptop to classes to do homework during my free period and it connects through ethernet no problem. Today, randomly it says theres limited connectoin (no internet connection), but there's numerous other people here with laptops who are connected through the ethernet or wireless network, and their having no problems. I've already tried shutting my computer down and that didn't work, and since this is a school, the internet connection has to be steady, etc. What can I do to fix this?Some details about the laptop[CODE]
View 7 Replies
View Related
