Wired LAN / Limited Or No Connectivity Windows 7 X64
Mar 5, 2012
I am experiencing an issue with a LAN connection on my Desktop computer running Win 7 x64 with an NVIDIA nForce Networking Controller. I am receiving a "Limited or No Connectivity" message but I know the Router and LAN cable are good as I can plug it into a laptop sitting right next to me and do not experience any issues.I have checked the original manufacturers website for drivers however they do not offer any for Win 7. Trying the Vista x64 drivers results in the same limited connectivity issue.Hardware Specs I have on the Computer:
- Shuttle SN68SG2
- NVIDIA GeForce 7025
- 7 Series Glamor small form factor XPC Barebone
I have also tried the latest drivers from NVIDIA with the same results. [code]
View 2 Replies
ADVERTISEMENT
Jan 17, 2013
In my LAN one of my computer is shown limited connectivity
View 1 Replies
View Related
Jun 12, 2012
I found out my onboard ethernet port was fried, so i went out an bought a RTL8139D ethernet PCI adapter. I fitted the adapter and plugged my cable in. It said Limited or no connectivity. After hours and hours of googling I tried everything. I changed the protocols, created static Ip's went into cmd and reset winsock catalogs, release/renew etc. The cable I am using worked previously in my room and it still works. (I took a laptop up to my room and plugged in the cable and had internet connection). So... I took my PC downstairs and used a different cable. This successfully connected me to the internet. That Rules out that my new ethernet card is the problem. MY cable also allows others to connect to the internet. Windows 7 64X Ultimate edition.
View 1 Replies
View Related
Nov 9, 2012
I reformatted using an old XP disc, Got the Ethernet Driver set up fine, but now I can not connect to the Internet, because the card refuses to fetch the DNS Addie, and default gateway, it's the only computer in the house having issues, the computer I am having problems on is an old Hp Dv 9317cl series, with a nivida chipset Ether card.
View 3 Replies
View Related
Mar 17, 2012
So, I reformatted using an old XP disc, Got the Ethernet Driver set up fine, but now I can not connect to the Internet, because the card refuses to fetch the DNS Addie, and default gateway, it's the only computer in the house having issues, the computer I am having problems on is an old Hp Dv 9317cl series, with a nivida chipset Ether card.
View 3 Replies
View Related
Jul 19, 2011
I just purchased the N600 DB Wireless Router with my ISP (Road Runner) I can connect wireless thru a laptop and a tablet, but when I try to connect wired(LAN) thru desktop (XP Pro SP3) I receive the Limited or No Connectivity. If I bypass the router and plug straight into the cable modem I can connect without issue. I have tried resetting the router, modem and computer to no avail.
Here are the results for ipconfig and ipconfig /renew C:>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
[Code].....
View 13 Replies
View Related
Feb 22, 2011
i have a BEFSR41 v3 firmware v 1.05.00 - i have been usuing it for at least 7 or 8 years now - at one time i had 3 computers hooked up and they all three worked fine. Now i have 2 plugged into the router - both are xppro machines - the one i am now works with no problems. The other computer however has the limited or no connectivity problem.I used this router for years without any problems then one day this ip conflict message started to appear.Then one day i started getting this weird ip conflict message on both computers but only occasionaly - it never caused any problems - if you ignored it - it would simply go away.Then one day computer #2 got the limited or no connectivity message - i simple reboot fixed it. This solution worked several times. Computer #1 has never had any problems.
Sometime later the limited or no connectivity problem reappeared and this time a reboot did not work - i searched for a fix and decided to try changing the link speed from auto sense to 10mb half duplex - this solved the problem. This solution worked several times.Sometime after that the limited or no connectivity reappeared and after some searching i upgraded the routers firmware - this solved the problem.Sometime later the limited or no connectivity reappeared and this time i had to actually uninstall the NIC, reboot and then let it redetect the NIC and then the problem was fixed. This solution worked several times.Sometime later the limited or no connectivity reappeared and the previous solutions did not work to fix it - after searching for a fix i discovered that i could simply unplug the router and the plug it back in and this would solve the problem. This solution worked many times.Sometime later (wich brings us to 3 or 4 months ago) the limited or no connectivity reappeared and this time after searching for a fix i was able to fix it by updating the NIC drivers. Problem solved.This brings us to now - the limited or no connectivity has reappeared and none of the previous fixes correct the problem.When i originally set everything up it worked immediately out of the box.
DHCP is enabled - everything is set to obtain an ip address automatically.At first the event viewer reported The IP address lease 192.168.1.100 for the Network Card with network address0xxxxxxxxx has been denied by the DHCP server 192.168.1.1. {The DHCP Serversent a DHCPNACK message}.Now the even viewer just tells me it is using ip address 169.254.xxxxxx - (not the exact message but i didn't wanna go back and look)I have tried all of the previous fixes to no avail. I've tried shutting everything off and turning everything back on - i've tried resetting both the modem and the router - i've tried upgrading the firmware again. I even downloaded LELA and installed it on both computers thinking maybe it would detect and fix the problem buy no such luck. LELA simply tells me that computer #1 is working normally. On computer #2 when i installed LELA the first thing it did was try to find the router and it tells me it cannot find it.I.ve tried ipconfig /release and ipconfig /renew - i've tried it one after the other and also a reboot in between. I've tried clicking on repair in the LAN status - i've tried even tried different cables and switching ports on the router.
View 9 Replies
View Related
Mar 29, 2011
My wireless show connected connection give me a 'limited or not connectivity' but a wired connection has no problem?
View 2 Replies
View Related
Oct 23, 2012
My desktop PC ran Vista Home Premium and about over a year ago, suddenly developed the dreaded, 'Limited Availability' connection error when I tried to connect via ethernet cable to my D-Link dir 615 router.I have tried all possibilities (detailed in the other forums I have posted this issue in), like all the ipconfig commands in the CMD prompt, rebooted modem and router and pc but still getting this issue. [codde] As you can see - the Belkin wifi dongle connects fine, with an IP address of 192.168.0.101, however, the SiS191 ethernet controller (which has current and up to date drivers) refuses to connect and gives an IP of 169.254.241.0.I have also tried copying the settings from the wifi dongle and manually entering them for the ethernet connection but this also does not work..I don't think its an issue with my router as I also have a laptop, connected via ethernet, which works fine. Also have 2 iPhones, 1 iPod, 1 iPad, Xbox and Wii which ALL connect to the same router (via wifi) without any issues.
View 5 Replies
View Related
Jul 12, 2011
Okay so I have a dual boot computer(windows xp3 and Linux Ubuntu). The Ubuntu wireless works so that means my hardware actually works, but my windows xp doesn't connect. First I have the xp3 so my recovery disk from Toshiba some of the stuff is outdated. I installed intel chip-set, intel proset(my wireless) , wireless LAN, oh the stuff that have to do with wireless and still doesn't work. This is what happens, proset finds the router tries to connect and it says limited. I tried repairing it but nothing works. P.S. the stuff that are outdated are like the QFE ( those are a lot of files in my Toshiba recovery and every time i try to install them they don't work they say that the system I am using is better than the stuff i am trying to install)(QFE is also just the name in front of the file and there is at least 25+ , don't know why it is QFE)
View 3 Replies
View Related
Dec 30, 2011
I am trying to connect to the internet using both wifi and wired directly to the router and keep getting the same message "limited or no connectivity". It will see all the available wifi networks, and will even connect to the network, but no internet. I have used google and tried several solutions but to no avail. Also, just fyi, i currently have my desktop hardwired to router, and another laptop, ipad, ps3, wii, droid bionic and a couple of netbooks that all can connect to the router using wifi with no problem what so ever. I have also tried to connect to other networks with the same results. There are 2 network adapters, a broadcom netlink (tm) gigabit ethernet and a dell wireless 1397 wlan mini-card. Here is the ipconfig/all.
View 16 Replies
View Related
Oct 31, 2012
I'm running windows7 and I have problem with my network. When I connect to the router it can detect the router but it cannot identified the network and get limited connectivity. I have tried using wireless and LAN connection and it result the same problem.
View 1 Replies
View Related
Jul 26, 2011
I have gone through the previous post related to limited or no connectivity.But I am still not able to figure out the problem with wireless connection in my windows xp sp2 OS.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAnuj>cd ..
C:Documents and Settings>ipconfig/all
[code]....
View 4 Replies
View Related
Dec 16, 2012
I bought an Acer laptop running on Windows 8, but the internet would disconnect every few minutes and it would say no internet connectivity or limited connectivity.
I replaced the PC with an other one and I had the same problem. so I returned the PC and bought a Packard Bell running on windows 8 as well, but again the same problem. I do have other computers in my household working fine (not windows 8).
View 14 Replies
View Related
Jan 2, 2013
It is running on windows vista home premium 32 bit sp1, if that matters.I have just had my computer's motherboard changed recently. After reinstalling the wireless adapter, the internet works! Until I found when I came back later that my internet shows unidentified network with limited connectivity. It happened when I was not around and my computer went into hibernate mode after downloading firefox installer. There is no antivirus installed, so it can't be a problem. My wireless adapter is the usb type,brand tplink: TL-WN721N. Tried a few methods suggested by the internet but nothing works: unchecking the iv6 box, follow the steps that starts with the regedit part, uninstall and reinstall the driver for the wireless adapter, fix the ip address.There is no problem with the network as the rest of the computers and laptops in the house has no network issues. But all of them are running on windows 7.
View 19 Replies
View Related
Dec 27, 2011
In windows server 2008 i got the mess "limited connectivity" after one hour (approx)
View 2 Replies
View Related
Oct 23, 2011
I connect to the internet using a wireless USB. I woke up this morning and the internet showed that it was connected yet it wouldn't allow me to open the web or anything such as "msngr" I took the wireless card out for a couple minutes and then tried. That didnt do anything but say acquiring network address. I am not that knowledgeable when it comes to computers but these are the things that I have tried so far :
I went into properties and configure USB . . Made sure that the SSID said "Any" I Also tried going into properties and tcp/IP internet protocol and made sure it was on obtain IP address automatically . Hmm I tried. RUN>SERVICES> to make sure that the DHCP and TCP were started and on Automatic. I then tried system restore :- (went back about 2 weeks) . . Nothing. I then tried RUN>CMD>IPCONFIG/RELEASE *ENTER* IPCONFIG/RENEW *ENTER*.
when I did that it showed wireless network is now connected, yet back to ground zero. It wont let me browse. Its not really connected. When I look at the connection status, signal strenghth is good. Packets sent & received are good. I feel like there is just something little that. I am not getting, that is making this happen.
View 12 Replies
View Related
Dec 30, 2011
From my company for a new line of work I started. Was "deep frozen" when I got it and was useless to me in that state. Got it thawed and it suddenly wanted to do loads of updates, so I let it. Apparently I was not careful enough & got the "XP antivirus 2012" malware.Eventually conquered that beast and installed avira free.almost immediately avira picked up on the "html/infected win.gen2" malware.I quarantined, deleted, scanned comp. w. avira, rkill, & malwarebytes. all scans came up clean but I now have no connectivity. wired conn. continually tries to acquire network address and w.less has limited or no.Not my router or modem as I have 2 home comps actively cnctd as I type this. Also tried multiple other networks w. same neg. results.After loads of searching and t/s'ing I believe I have found the root of the problem: When I look under "services" I found that "netbios helper", "Network Location Awareness" & "dhcp client" are all not started.
Trying to start them results in failure b/c some "dependencies are marked for deletion". the afore-mentioned 3 things are dependent upon the Netbios over tcpip and tcpip protocol driver. Those drivers are in the system32/drivers folder but I cannot find a "non plug and play" section in the device manager.Yes, I looked under "hidden devices" and I looked in every drop down. I successfully cmd: netsh int ip reset c: esetlog.txt but when I tried to reset winsock I got winsock is not recognized as an internal or external command, operable program or batch file.I have no reboot disk or thumb drive and bios is p/w'ed so I can't wipe the slate clean and start fresh. Is there anything I can do short of giving it to the "IT guy" at work? That's a black hole I'd really like to avoid if possible.
View 3 Replies
View Related
Jul 23, 2012
I have been having some gripes with the above problem for the past few days, connecting several PCs in my office into a network. To cut a long story short, it's a bunch of XP SP2 and SP3 machines with only some of them having these issues. The network consists of two switches and one router with integrated modem and wireless. Internet access is established over that router/ ADSL modem.I have drawn out all the cabling and made all the connections myself, I don't doubt network related hardware one bit. Basically, I had the problem on two PCs, I tested connectivity on that cable with a laptop which didn't have any problems connecting to the network. All the cables are brand new, "straight" connectedC
View 14 Replies
View Related
Mar 17, 2011
i did this and the sign of unable to connect went away, restarted back to it, did it again and it goes away but still no connection. TCP/IP stack repair options for use with Windows XP with SP2.
View 8 Replies
View Related
Sep 3, 2011
my internet is not working on my PC (XP) however the wifi in my house is still on (i can use laptop with functioning internet). The internet status say's "limited or no connectivity" and shows a yellow triangle with an exclamation point in the middle.
View 19 Replies
View Related
Sep 9, 2011
I manage a small office network IP's are generated via a rooter. I need to add a new pc to the network and here is where the problem starts.I have a cable from a HUB in that office which has a splitter 1 way goes to a PC the other is empty. At first i tried connecting the other PC from that splitter but i get the Limited or no Connectivity message on both PCs. If i connect only one of them to the splitter the connection works fine.Now i tried with a HUB, made a Crossover cable from the splitter to the HUB in the WAN port, same deal both PCs get Limited ot no Connectivity. THe strange thing is that if i connect only one via the HUB the same thing happens.I am really out of ideas, my only option left is to connect the PC from the main HUB which means allot of cable posing.
View 3 Replies
View Related
Oct 3, 2011
When using an Ethernet cord, I have no problems connecting to the internet. Also, my iPhone and my Wii have no problems connecting (wirelessly). However, I can't get any laptops to connect to my wireless. I have tried three different laptops and get the same problem, that it can connect to the network but limited or no connectivity.
View 1 Replies
View Related
Aug 28, 2012
I have a spare computer I build. Its a FX-60 on some old asus 939 motherboard. I installed xp in it because I don't have any wireless network adapters that work with linux or Windows 7.I am using an old Linksys WUSB11 Ver 2.6. USB adapter.The computer does have connectivity if I plug in an ethernet cord from the router. Worked fine, fast, was able to install Sp3, etc.I can't get the wireless to work. I get excellent connection strength, but can't actually do anything with it.Since this is XP and I haven't messed around with XP network settings for years, I think I got a bit rusty and spoiled with Windows 7.
View 6 Replies
View Related
Oct 19, 2011
Limited OR No Connectivity.
View 1 Replies
View Related
Jul 19, 2011
used to use Ethernet connection on this pc for 2/3 years, i recently ran wireless for like 2months. every time i try and use Ethernet i get limited or no connectivity warning, I looked in my ipconfig, i notice theres no physical address or default gateway for my realtek rtl8139/810x family fast Ethernet.
View 4 Replies
View Related
Sep 9, 2011
I got the urge to play a Windows game, so I used my restore disks to install XP on my Acer Aspire One A150. Unfortunately, my wireless card does not work anymore (?). I am dual-booting with Ubuntu 10.10 at the moment and my wireless card works there with no problem.I get a Limited or No Connectivity error every time.I'm connected to a router, which I have reset and works okay in Linux. I am connected currently using a USB D-Link N-Adapter, however, despite being "N" is considerably slower and inconvenient.
[code]...
View 13 Replies
View Related
Apr 19, 2011
I just installed a new NIC after troubleshooting old NIC and I am still receiving limited or no connectivity error. I checked router, cable modem & cable; all work fine.
View 13 Replies
View Related
Jan 25, 2013
I got this message and I went up to the " Start-Run_CMD-IPCONFIG and this is what I got Ethernet adapter Local Area Connection Media State....... Media Disconnected,Ethernet adapter Wireless Network Connection
View 1 Replies
View Related
May 27, 2011
I've searched the forums and found similar problems that relate to mine but after trying done of their solutions with no success I decided to make a new thread. This problem started 2 days ago with the same network I've been using for about 2 months.I'm running vista sp 1. I use google chrome and when I try to open a page it says unable to connect to proxy server. I changed the lan setting s (unchecked the box for using a proxy server for my lan) and now the page says the dns lookup failed.
View 1 Replies
View Related
Jun 30, 2012
I have a laptop running XP that will connect to the router wirelessly but not the internet. We have a static/fixed IP that I think may be the problem. Im not sure what the IP address is. Do I need to manually enter this (and DNS settings) into wireless connections > properties > TCP/IP, Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp.
View 9 Replies
View Related
Jan 30, 2012
I usually bring my laptop to classes to do homework during my free period and it connects through ethernet no problem. Today, randomly it says theres limited connectoin (no internet connection), but there's numerous other people here with laptops who are connected through the ethernet or wireless network, and their having no problems. I've already tried shutting my computer down and that didn't work, and since this is a school, the internet connection has to be steady, etc. What can I do to fix this?Some details about the laptop[CODE]
View 7 Replies
View Related
Aug 16, 2012
We had a lightning strike near the house and it fried my NIC card (or so I thought), also my power strip. I replace them both along with my Ethernet cables. My internet intermittently goes out, every couple of minutes. I keep getting pop ups saying "Local Are Connection has limited to no connectivity" and/or "a network cable is unplugged".
View 5 Replies
View Related