I don't have a router but I need to provide internet to two devices. I have a Gigabyte P55A-UD3 motherboard and a Linksys ethernet PCI card. Is there any way I can connect the Internet to my motherboard, and then provide internet to my second device via the PCI card?
View 5 RepliesI connect to the internet with a usb wireless modem on one computer.I have creat a home network and I need to share the internet to rest of the computers on my network.
View 1 Replies View RelatedI have a Realtek PCI GBE Family Controller. I recently reinstalled Win7 and it loaded drivers for the card automatically. I actually didn't notice the speed issue until I went to move stuff around on the home network.
The Device Manager lists the above NIC. Under Properties I have:
Auto Disable Gigabit = Disabled
Speed & Duplex = Auto Negotiate
I tried setting Speed & Duplex to 1.0 Gbps Full Duplex but I only interrupted a file transfer by doing this. (The Network icon in the System Tray indicated that the network connection was lost.)
I am using Cat5E 1 Meter or less cables. I have 2 PCS next to my desk with a D-Link Gigabit Switch sitting on top of one of the computers. AFAIK all ports on the switch support Gigabit.
I just received a new computer with the G41M-ES2H motherboard. Everything works as long as I use an ethernet cable, but I want to set it up to access the Internet wirelessly since I already have a wireless network. Is there some type of special set up to initialize a wireless connection, or do I need a separate wireless card to make this work. If I need a wireless card, which one is best for normal home-office type Internet use?
View 1 Replies View RelatedGA-890FXA-ud5 is supposed to have built in 802.11n. I just upgraded my Verizon modem to mifi2200 but cant's get them to play nice
View 1 Replies View RelatedI'm planning on building a gaming computer and I don't want it to run on my wireless network which is in the basement. I have absolutely no experience with networking, and I need setting up a gigabyte network and trying to reaching 1GB of speed. I have heard of gigabyte networks and what gigabyte networks are and how to achieve 1GB of speed.
View 14 Replies View Relatedi cant install network controller where do i can download network controller driver for gigabyte 8ipe1000,i cannot find it?
View 1 Replies View RelatedI have recently installed a new motherboard (Gigabyte X58A-UDR3R) and i've been having a problem where when i plug my ethernet cable in to my on board lan nothing is being detectedOn start up the with the cable plugged in the ethernet light will flicker letting me know its being detected then randomly shuts off when i reach my desktop. This happens and i dont have a connection to the internet
View 1 Replies View Relatedi need Ethernet and network controller drivers for gigabyte Q1500M
View 1 Replies View RelatedI am assuming, that the slowest component on a network determines the connect speed? I am having a small network with 4 pcs and 2 of them show 1GB connect speed while the other 2 show 100MB. What would cause 2 units to run at the 100MB speed on a Gigabyte-Switch and Router?
View 3 Replies View Relatedhave a computer that connects to the internet via a wireless network connection. The router to which it connects is not physically available.I have a device that I want to connect to the internet. However, it is a wired device. The device cannot reach the wireless router that the computer connects to.Is there any way for the wired device to connect to the computer as an intermediary? The computer has a built in wired network card (as well as a USB wireless device that connects to the wifi router).
View 3 Replies View RelatedI am trying to share a printer on Windows Server 2003 machine so that my other computers can access the print share from my server. originally i was hosting the print server from one of the workstations (running Windows XP SP2). I now want the printer share to be hosted from the server. I set up the printer correctly (to my knowledge). i was able to set it up and print a test page. But when i go into properties and attempt to share the printer, i click on Share this Printer and enter in a name, i designate it to list the printer in the directory. Then i click apply and ok... and nothing happens. the printer is not shared. When i go back into properties, it shows that i am not sharing the printer.
View 2 Replies View Relatedim looking for a wifi device that i can watch movies from my laptop on my tv.
View 1 Replies View RelatedI get 2 troubleshoot messages printer cannot be contaacyed over network and windows can't find a computer or device named....
View 1 Replies View RelatedAfter using my 2 TB WD network storage device on other systems both wirelessly and via an ethernet connection, I decided to install the device on a new system via a wired connection. Unfortunately, my computer (WIN XP) won't recognise the device when using a direct connection though my talk talk supplied D-LINK wireless router. I have contacted WD and talktalk and gone through all the diagnostic processes but it still won't recognise the device. I have been able to connect this device through an older D-LINK router (still wireless) on the same talk talk ISP with no problems so I can't understand why it won't connect here. The WD device reports no problems but I can't access it, even when all firewall and AV programs are disabled.
View 3 Replies View RelatedI am using a proxy to access the internet on my computer, how can i use that proxy on my iphone, when sharing internet connection?
View 2 Replies View RelatedDoes the wifi switch have to be on for a bluetooth device to connect with this computer? That is the only way I can get it to connect, but I have been told, maybe in error, that you shouldn't have to have the wifi on to do so. When my wireless adapter switch is on, my bluetooth device does connect to the computer but in the Windows Mobility Center it does show the bluetooth icon even though it is showing up in the taskbar.
View 9 Replies View RelatedI am with Virgin media (UK) and have the 20mbps fiber optic connection. My area has recently been having problems with the broadband and Virgin has recently fixed these problems. However I used to get around 19mbps now that the problem is fixed my computer which is wired to the router gets about 0.4mbps downstream... However the 5 wireless computers all get 16mbps which is pretty good for them. Windows tells me that its a firewall issue and I currently can't use two programs, spotify and steam. They both have firewall issues, even if I turn off my firewall which is the windows one. I also have avast, and when I turn that off, still no good. I used OpenDNS, stopped using that flushed my DNS, that didnt work. I tried to optimize my computer settings, by changing various values in Regedit.All of this has done nothing. I should add that I have recently re-installed Windows 7 so on this fresh install it has never had decent internet speed. Which I thought was weird.. I have basically had these problems since the fresh install. All of my drivers are up to date.
View 10 Replies View Relatedi want to understand how patch panels work, so far the google searches that ive done only adds more confusion.i bought a patch panel and iam in the process of buying a switch, here is what i am doing, i cut a 2 feet long ethernet cable and i punched down the cables to the back of the patch panel ( straight through)then the other end i put a RJ45 that goes connected to the switch. and i leave the front of the patch panel for PCs etc. is that right? but some info out there point out to punch down the cables to the back of the patch panel that come from the PCs,
View 6 Replies View RelatedI'm currently volunteering at a children's group near me. They've just moved offices and are wanting a computer network in place. I have quite a bit of experience with hardware and software troubleshooting, but anything past the server is beyond me.They have a telecommunications box, as many places do, and the box has a set of patch boxes that are, according to the telecommunications people, plugged in and good to go. Each office has tunnelling on the wall with network sockets, again the norm.
View 4 Replies View RelatedI currently have the following set up in my basement: Modem to 8 port router which has cables going into a patch panel which in turn provides internet access at 8 wall outlets throughout the house. My data/video streaming needs are expanding and I have had additional wiring pulled to the new locations. I would like to know if I can bypass the patch panel and go from the Modem to a 24 port switch to individual wall plates throughout the house.
View 1 Replies View RelatedAm running Cat6 cable to my cellar. I plan to run a face plate in the walls of all rooms where there will be an ethernet connection. Originally when I did this in a previous house I wired two rooms together i.e. a face plate in one room and the other end a face plate. I did a cross over cable for this so when connecting anything at the other end it would talk to the device in the other room i.e. room A NAS straight through to face plate, room B PS3 straight through to face plate for example.However as I will be connecting multiple rooms together in to a patch panel then switch / router how will this then work? For all rooms where there is face plate do I crossover all cable to the patch panel or straight through? If straight through to the patch are my patch leads then cross overs to the switch?
View 2 Replies View RelatedI need to patch our ACS server to 4.2.0.124.17 from 4.2.0.124.6. My question is, do I need to apply the same patch to our remote agents? Cisco's documentation only states that both the ACS and the Remote Agents need to be 4.2.0.
View 1 Replies View Relatedproperly patching and/or cleaning the ACS version listed in the title.
First off - what does the Cleaning utility do?
Second - I have obtained the two following files:
ACS-4.2.0.124.17-SW
ACS-4.2.0.124.16-Clean
Can these both be used to correct a problem we have with our current installation?
On my closet's patch panel, there's one ethernet jack that is labeled "IDF5", I was just wondering what it is used for.
View 3 Replies View RelatedI am trying to upgrade the switches in one of the buildings to Gigabit HP ProCurve switches. Currently, this building has 3 wiring closets, and each closet has 2 Intel Standalone 460 switches (24 ports). We use them as simple Layer 2 Switches. Nothing fancy.We recently bought 3 48 port HP Procurve Gigabit switches.I was planning on going in and swapping the 2 Intel Switches out with the HP Procurve Switches. The first closet went fine, and we had immediate connectivity (servers, Internet, etc.). However, when I went to the second closet I found that I could not connectivity back to the first closet.I then noticed the patch cable going from Closet A to Closet B is terminated with a female connection on both end. And then a patch cable is connected from the end, to the switch at both sites. I have never seen this before. And I hope I am making sense. Why would this method work with the old Intel switches (that are close to 10 years old) and not with the HP?
View 5 Replies View Relatedinfo on RJ45 patch panel wiring standards. Is there an Australian standard that specifies exposed cable pairs be not more than 13mm at termination point (RJ45) wiring cat cable?
View 1 Replies View Relatedwhat's the best way to apply a patch in ACS 5.2 distributed configuration ?
View 1 Replies View RelatedWhether ACS Se and Remote Agent 4.2.1.15.4 supports Windows 2008 R2.
View 6 Replies View RelatedI need to use 14Dbi patch antennas (like AIR-ANT5114P-N I use to have on AP1522) on AP 1552E. Is it possible?
View 2 Replies View RelatedI am migrating WCS to PI 1.3. I read from the guide that we need to migrate to NCS 1.1.1 first and we can get the demo license from Cisco.but the demo license is only 100 unit, but my WCS has 300 license units.How can I import the wcs data to NCS? Besides, I also read from the guide that I need to install patch in NCS before migrating the data to PI 1.3.can I install the patch before i import the data from WCS?
View 2 Replies View RelatedI installed ise-1.1.1.268.i386.iso on a scratch to the new NAC 3315. As i check cisco download mentioned it need to patch following files :ise-patchbundle-1.1.1.268-1-60802.i386.tar.gz,But once try to patch it show like attachment message, is it mean that i no need to do the patching?Or is there any instruction need to remove and reinstall for this files.
View 4 Replies View Relatedprocedure to apply the 5-2-0-26-4.tar.gpg patch. I don't know how to get the patch file into the ACS server.The procedure in the "Read me" for the patch does not indicate anything about how to this:
1. open CLI console2. define new repository in which the 5-2-0-26-4.tar.gpg resides3. issue: 'acs patch install 5-2-0-26-4.tar.gpg repository YOUR_REPOSITORY'4. verify installation by getting the following version information via CLI by issuing:#show application version acs I don't know how to put the patch file from my local machine to the repository created in the GUI (if there is where the actual place to creat the repository).