I installed ise-1.1.1.268.i386.iso on a scratch to the new NAC 3315. As i check cisco download mentioned it need to patch following files :ise-patchbundle-1.1.1.268-1-60802.i386.tar.gz,But once try to patch it show like attachment message, is it mean that i no need to do the patching?Or is there any instruction need to remove and reinstall for this files.
View 4 Replies
After we have installed patch 5 on several ACS 5.2 server they aren't able anymore to write their backups to the sftp servers. I tried to search on the bug tool kit, but it seems to be broken when searching for the keyword "sftp". It's the same when I try to do a "copy logs" with sftp as destination.running a debug I can see,
acs/admin# copy logs sftp://10.1.115.11/,Collecting logs...,Username: backupuser,Password: ,6 [16376]: transfer: cars_xfer.c[301] [admin]: sftp copy out of /var/tmp/ADElogs.tar.gz requested,6 [16376]: transfer: cars_xfer_util.c[412] [admin]: resolved server to 10.1.115.11,7 [16383]: transfer: sftp_copy.c[75] [daemon]: Executing SFTP command: /usr/bin/scp -o StrictHostKeyChecking=no /var/tmp/ADElogs.tabackupuser@10.1.115.11://ADElogs.tar.gz,% Error: Transfer failed3 [16376]: transfer: sftp_copy.c[230] [admin]: sftp_copy ERROR: command execution failed,3 [16376]: copy: cm_copy.c[1226] [admin]: Logs archive transfer to url sftp://10.1.115.11/ failed retcode=-306,acs/admin#
My site got the NAC-3315 appliance and we would like to reimage this appliance to inline posture mode (for VPN purpose)What's the proper migration process should deal with this? Is the NAC-3315 hardware comply with the Inline posture mode requirement?
View 4 Replies View RelatedIs it possible to add another NIC to the Cisco 3315 NAC appliance. It ships with Four ethernet interfaces, but would like to add at least 1 extra interface i.e. PCI card if possible.
View 1 Replies View RelatedWe have insatalled 5 ise 3315 boxes IOS 1.0.4 in our network where in two of them are admin node , two of policy services and one is mnt node. We are using guest sponsor portal for wirless guest user where in we have integrated WLC 5508 with ise and using weblogin for guest users.
We have created open ssid in wlc and using external redirected url of ise for guest login page. But when we create any guest user in sponsor login for guest user we faced following issue
1) When guest user gets conected to wirless and login in to guest portal with credential after putting credential then its again redirect to same login page wihout successful login prompt.
Can we pompt successful login after guest login to guest portal or redirect to any other link like google.com so guest user will gets to know he is able to access internet now
2) We have creted time profile 8hours first login for guest user. When guest user gets connected while putting credential in to guest portal. But we face issue after approximately every 20 mins guest gets disconnected from internet and guest again gets login page of guest portal and if we put same credential then its working but after approx 20 min interval user get disconnected from internet.
I have a nac guest server 3315 appliance with 4 NICs. I want to connect each NIC to 4 different networks without allowing traffic between them. So RADIUS interface will be different from sponsor/admin interface to the NGS. how to achieve this. I have created and assigned a static IP address using system-config-network, but when i do ifconfig i dont see the remaining 3 NICs and the web interface doesnt seem to have provision to create this interfaces.
View 3 Replies View Relatedwe have a new ISE 3315 installation going on, I powered on the Appliance and appliance booted sucessfully, I run the Setup command. however after Setup is completed and appliance got a reload, it is not booting at all , booting seems to be hang up as per the snapshot attached.however Appliance is pingable, . i carried the following tasks as part of troubleshooting.
2: suspecting that Setup was corrupted, i then re-initialzied / re-installed the ISE Completely, then i run the setup command and after self reload, exactly same behaviour.
3: I tried with both Secure CRT & Putty and results are same
Whether ISE-3315-K9 with ise version: Service Engine: 1.0.4.573 , supports the command level accounting
Bascially , we have integrated Cisco Switches with Cisco ISE for Device Authentication using Radius , we are able get the authentication logs on to the devices , but for any command changes or update done on Cisco devices we are not able to get the command accounting.
We are conduction a Proof Of Concept (PoC) on Secure Bring Your Own Device ( BYOD ) using Cisco ISE and gonna test all the scenarios like Wired, Wireless and VPN user access.
Our Setup has ISE VM acting as Admin, Monitor and Profiling Device, we have NAC 3315 physical Appliance as Inline posture Device, Wireless LAN controller, Access point and the Identity source as Microsof Active Directory.Having Plans to Integrate Mobile Device Management ( MDM ) and Citrix VDI setup also.
As of now we have tested the Wired Scenario Authentication and authorization for guest users and gonna carry out the profiling and posture.
-MDM can be integrated to ISE ?
-How the MDM can be integrated to Cisco ISE configuration or Guide to show the same?
-What is the demarcation between MDM and ISE ( i.e. What is the role of ISE and MDM on Mobile Devices ) ?
-If MDM is available so then when the control of ISE ends, does MDM do management or ISE will do management of the devices ?
-Is MDM will do client provisioning or ISE should do ?
-Is MDM send or update patches of Mobile Devices ?
my ISE 3315 is stuck in ISE 3315 stuck in INIT Entering runlevel: 3 when i connect a screen and keyboard i can only see this last message : ISE 3315 stuck in INIT Entering runlevel: 3 There is nothing after, i cannot login (no prompt) even after waiting 20 minutes with this message
I have no char return via serial cable depsite i was able to run initial setup from console (same cable, the DB9-DB9 provided, same serial config, same laptop)
Version ADE : ADE-OS-2.0 (2.6.18-238.1.1.el5PAE)
Version ISE : 1.1.0.665
I would like to ask, given that i got 2 units of ISE-3315 appliance, one need to be primary node for admin-policy service-monitoring, another unit then become Inline posture node.For the preparation on line posture node, what shoud i do on it?
01. For the unit ready to become inline posture node, so I just boot it, install the OS from sractch (using version 1.1.1), then start the initialize setup etc, like Normal setup?
02. Before i regieter, what is the deployment nodes i should select for inline posture node unit? provided the admin-policy service-monitoring will become primary node, and registration for inline posture node will be next action.
We want to buy a ISE-3315-K9 for 500 end-devices.In the price-list I found the ISE-3315-K9 but cannot find the base license: L-ISE-BSE-500=. (I think I need this license)Will the shipment of the ISE-3315-K9 includes a 3000 end-points base license (maximum support of the ISE-3315) or do I need to order the base 500 license seperately?
View 1 Replies View RelatedI need to patch our ACS server to 4.2.0.124.17 from 4.2.0.124.6. My question is, do I need to apply the same patch to our remote agents? Cisco's documentation only states that both the ACS and the Remote Agents need to be 4.2.0.
View 1 Replies View Relatedproperly patching and/or cleaning the ACS version listed in the title.
First off - what does the Cleaning utility do?
Second - I have obtained the two following files:
ACS-4.2.0.124.17-SW
ACS-4.2.0.124.16-Clean
Can these both be used to correct a problem we have with our current installation?
what's the best way to apply a patch in ACS 5.2 distributed configuration ?
View 1 Replies View Relatedprocedure to apply the 5-2-0-26-4.tar.gpg patch. I don't know how to get the patch file into the ACS server.The procedure in the "Read me" for the patch does not indicate anything about how to this:
1. open CLI console2. define new repository in which the 5-2-0-26-4.tar.gpg resides3. issue: 'acs patch install 5-2-0-26-4.tar.gpg repository YOUR_REPOSITORY'4. verify installation by getting the following version information via CLI by issuing:#show application version acs I don't know how to put the patch file from my local machine to the repository created in the GUI (if there is where the actual place to creat the repository).
I am trying to apply pach 5 to my ACS version 5.3 using FTP but i receive the following errors after issuing the show backup history command. When i use TFTP, i get a message saying that the file is too big, which i understand 164 MB.
after issuing the show repository "repository name", i get the following error.% Error reading directory on remote server.the patch is on one of my hard drives D, how do i specify on the ACS file path which drive to use?I can only place a url but without specifying which drive.
i'm using ACS 5.3.0.40.2 and its setup with an AD External Identity store for wireless PEAP MSCHAPv2. AD is configured with Alternate UPN suffixes so that for example: 22056 Subject not found in the applicable identity store(s). ##
I've checked the release notes for 5.3.0.40.5 and there are some changes/fixes for AD but nothing I can see to explain the behaviour above. I'm looking to upgrade to 5.3.0.40.5 soon but I really need the Alternate UPN suffixes to work.mydomain.com is the AD domain namean Alternate UPN suffix of another.com has been added to AD
A valid AD user can add either the @mydomain.com or the @another.com suffixes to their username and login successfully. This works fine with 5.3.0.40.2 but changes when I upgrade to 5.3.0.40.5 - users who use the @mydomain.com login ok but users using the Alternate UPN @another.com fail with the error: [code]
I have an issue with applying a patch to an ACS 1121 appliance running version 5.2.0.26. I have 5 units that needed updating and the first one is the unit with the problem. The subsequent ones updated with no issues.
When I do a show version the 5.2.0.26.10 does not show. When I try to do a reinstall I get back patch all ready exists. When I try to do an uninstall I get back patch does not exist.
Is there a command can wipe out patch 10, so I can start over? The CLI factory-reset only wipes the web configuration not the running-config or IOS.
I'm trying to upload the 5-2-0-26-4.tar.gpg patch to our ACS and so far have been unsucessfull. I keep getting the "please verify the patch bundle is valid".
When I download the 5-2-0-26-4.tar.gpg file, for some reason the download always comes down from Cisco as 5-2-0-26-4.tar.tar. I've renambed the file to 5-2-0-26-4.tar.gpg and verified the MD5.
I've got 2 freshly installed ACS 4.2 for Windows servers and I need to apply the latest patch rollup before I build the configurations. I stopped the ACS services and ran Acs-4.2.0.124.15-SW.exe to install the patches. The application begins running fine but fails on upgrading the database and then none of the ACS services would start. I was able to restore the files from the backup that runs with the patch utility and get ACS functioning again. What am I missing - does the patch rollup require any specific Microsoft Patches to be installed or something like that?
View 7 Replies View RelatedNeed URL for patch 4.2.1.15.3 with comptaible for cisco acs appliance 1120 . Though its for appliance patch should be along with webserver . I have downloaded patch of SE its not comptaible to this hardware .
View 4 Replies View RelatedConfiguration: VM with ACS 5.4 with patch 3. (upgraded from 5.2.0.26 patch 10)When I go on "System Administration" - "Administrators" - "Administrative Access Control" - "Authorization", I got this error:
What I tried:
"acs backup" on this server and shutdown
Install an ACS 5.4 with patch 3 on new VM --> I don't have the problem on GUI
"acs restore" to restore my configuration on new server --> I got this problem again...
I want to use this feature...After this error, others pages generate this error: I have to reload server or restart management service to get him back...How could I solve this? (I don't want to reconfigure manually the server )
About to apply a patch for the first time on the ACS 5.3 tonight. Ihave tftp'd it onto a directory i have created on the server. However my support hints i may havre to rename the file ? copy the latest patch file you got from Cisco – you may need to rename as gpg) Current filename is 5-3-0-40-7.tar.tar
So would i need to rename this as 5-3-0-40-7.tar.gpz . If so i will rename it on my pc and redownload it on tftp
I'm doing a basic setup of ACS 5.3. For now, I'm configuring backup to a local repository
!
repository Backup
url disk:/Backup
!
How can I automatically delete old files? I need to keep only the last seven files.
After ACS upgrade from 5.2 to 5.3 we have noticed that backup files are significantly smaller in size. For example before the upgrade they were:
285633099 2011-10-23 22:01 Meduza-ACS-111023-2200.tar.gpg
285809254 2011-10-24 22:01 Meduza-ACS-111024-2200.tar.gpg
And after upgrade:
124234429 2011-10-25 22:00 Meduza-ACS-111025-2200.tar.gpg
124234425 2011-10-26 22:00 Meduza-ACS-111026-2200.tar.gpg
What could cause this behavior? How we can be sure if backup files have been regular after the upgrade?
I got a ISE 3315 with an IP-Plus license on it. Now I need to install a Wireless advanced license, but I got an error when trying. I've read that the wireless license doesn't need the ip-base one but I can't remove it?
View 1 Replies View RelatedI need to estimate the installation and configuration time of Cisco NAC (NAC Network Module spare for 2800, 3800 ISR) and Cisco NAC Manager(NAC Appliance 3315 Manager -max 3 Servers. There is some Cisco tool to estimate the installation and configuration time?
View 3 Replies View RelatedI have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies View RelatedWhether ACS Se and Remote Agent 4.2.1.15.4 supports Windows 2008 R2.
View 6 Replies View RelatedI need to use 14Dbi patch antennas (like AIR-ANT5114P-N I use to have on AP1522) on AP 1552E. Is it possible?
View 2 Replies View RelatedI am migrating WCS to PI 1.3. I read from the guide that we need to migrate to NCS 1.1.1 first and we can get the demo license from Cisco.but the demo license is only 100 unit, but my WCS has 300 license units.How can I import the wcs data to NCS? Besides, I also read from the guide that I need to install patch in NCS before migrating the data to PI 1.3.can I install the patch before i import the data from WCS?
View 2 Replies View RelatedCisco view(patch 6.1.9) in lms 3.2.1 is not supporting router 1905.
View 11 Replies View Related
