Cisco AAA/Identity/Nac :: Applying A Patch To ACS 1121
Jun 3, 2012
I have an issue with applying a patch to an ACS 1121 appliance running version 5.2.0.26. I have 5 units that needed updating and the first one is the unit with the problem. The subsequent ones updated with no issues.
When I do a show version the 5.2.0.26.10 does not show. When I try to do a reinstall I get back patch all ready exists. When I try to do an uninstall I get back patch does not exist.
Is there a command can wipe out patch 10, so I can start over? The CLI factory-reset only wipes the web configuration not the running-config or IOS.
View 7 Replies
ADVERTISEMENT
Nov 11, 2012
About to apply a patch for the first time on the ACS 5.3 tonight. Ihave tftp'd it onto a directory i have created on the server. However my support hints i may havre to rename the file ? copy the latest patch file you got from Cisco – you may need to rename as gpg) Current filename is 5-3-0-40-7.tar.tar
So would i need to rename this as 5-3-0-40-7.tar.gpz . If so i will rename it on my pc and redownload it on tftp
View 3 Replies
View Related
May 31, 2013
It's impossible to use acs 5.2 recovery DVD to cisco 1121 acs 5.1?
View 7 Replies
View Related
May 15, 2011
integrated the Cisco ACS 1121 with 5.1 and AD and been able to use multiple policies to permit or deny access to different NDG? I am able to authenticate agains AD but I am having an issue with getting the policies to use the user memberOf attribute to set access levels.
View 1 Replies
View Related
Jan 6, 2012
It has been more than a year since a customer bought a Cisco ACS 1121. It was unpacked then and the PAK is lost, no where to be found. Is there any way to retrive the lost PAK ?
View 19 Replies
View Related
Jun 7, 2013
I have a clarification related with ACS 1121. Client needs a solution for ACS feature, instead of investing on ISE Base, is there any model exists as ACS appliance only. I believe ACS 1121 is going to be EOS and it says SNS 3415 is the replacement model .
What I am confused is , It is an ISE as well as ACS and there is separate licensing for ISE (as base and advanced). What should i do , if i need to select SNS 3415 as ACS appliance ? is it built in or should i need to add anything extra ?
View 3 Replies
View Related
May 2, 2011
Newly shipped cisco ACS appliance 1121 has been shipped with ACS version 5.0 , I need to downgrade to ACS version 4.2,0 , I could not see recovery CD or DVD for acs 4.2 along with shipment , Is ACS 1121 appliance is comptaible to acs 4.2.0 version ? .
My ACS BOM details
CSACS-1121-K9
ACS 1121 Appliance With 5.1 SW And Base license
[code]....
View 2 Replies
View Related
Mar 27, 2011
how to configure LAN teaming in Cisco ACS 1121. My requirement is to have virtual IP in the server with two physical IPs in the available 2 interface in the server.
View 1 Replies
View Related
Mar 26, 2012
I am trying to add ACS 1121 (ver 5.3) to monitoring and seems that MIB are missing. Need MIB for this device which I can use in monitoring tool.
View 1 Replies
View Related
Aug 13, 2012
I have 5 installations of ACS appliances (ACS 1121 running ACS 5.3). Is there a way to monitor them via SNMP? The AD client keeps dying on one of them, and even with the newest patch it's not up. Also, i want to monitor them up/down, CPU, memory... basic network monitoring to make sure my devices are healthy.
Any one know if that can be configured? I figured i'd ask here before opening a TAC.
View 2 Replies
View Related
Aug 11, 2011
Is it possible to have Dual NIC on ACS v5.2 such as teaming or any else??
I am thinking of connecting the two NIC on the CSACS-1121-K9 appliance to two switches on the same network, but wondering if it will be possible or not.
View 1 Replies
View Related
May 29, 2013
My customer has an ACS 1121 version 5.4. Now we want to install a secondary ACS 1121.
View 2 Replies
View Related
Oct 31, 2012
Im installing & configuring a new ACS 1121. Ive updated to version 5.3 with patch:This temporarily solves my Active Directory problem but i still would like to have the NTP server pointing to the same reference as the Active Directory.
View 1 Replies
View Related
Jan 11, 2012
I have to migrate two appliances ACS SE 1112 under 4.0.1 to new two appliances ACS SE 1121 under 5.2 version.I would like to clarify the procedure to do it by minimizing down time impact.I saw there are Migration Utility and Import Tool but do I need an Intermediate Windows Server to do this migration ?
View 1 Replies
View Related
May 9, 2011
I need to patch our ACS server to 4.2.0.124.17 from 4.2.0.124.6. My question is, do I need to apply the same patch to our remote agents? Cisco's documentation only states that both the ACS and the Remote Agents need to be 4.2.0.
View 1 Replies
View Related
Mar 2, 2011
properly patching and/or cleaning the ACS version listed in the title.
First off - what does the Cleaning utility do?
Second - I have obtained the two following files:
ACS-4.2.0.124.17-SW
ACS-4.2.0.124.16-Clean
Can these both be used to correct a problem we have with our current installation?
View 2 Replies
View Related
Jun 20, 2012
I have an ACS Server 5.1 which is used to authenticate my cisco and non-cisco devices. however when I take report on my authentications, the time shown in the report is wrong. However, when I take my mouse pointer to the report , the correct time is highlighted.
View 4 Replies
View Related
May 29, 2013
We upgraded a CSACS-1121 from ACS 5.2 to ACS 5.4 with CLI Application upgrade ACS_5.4.0.46.0a.tar.gz FTP After ACS reboot, services never start... After 15 hours, we always get same message:
ACS/admin# show application status acs
Application initializing...
Status is not yet available.
Please check again in a minute.
We installed patch 5-4-0-46-2.tar.gpg but we got same issue for 2 hours ...What could I do?
View 4 Replies
View Related
Aug 21, 2012
We have 2 CSACS 1121 with Cisco ACS 5.2.0.26.10 The primary server manages 20000+ authentications per day. Its memory utilization increases everyday. It is now at 83% , there a limit?,What will happen when memory utilization reach this limit?,What can we do to purge memory utilization? (reboot, service restart.
View 11 Replies
View Related
Apr 13, 2011
Is it possible to edit the hosts file on an ACS 1121 server running ACS 5.2? Our problem is we have a single domain with multiple domain controllers at different sites. So when the ACS server tries connecting to the domain it randomly picks a domain controller which it can't connect to thus causing it to fail.
View 5 Replies
View Related
Mar 22, 2012
what's the best way to apply a patch in ACS 5.2 distributed configuration ?
View 1 Replies
View Related
Aug 2, 2012
I installed ise-1.1.1.268.i386.iso on a scratch to the new NAC 3315. As i check cisco download mentioned it need to patch following files :ise-patchbundle-1.1.1.268-1-60802.i386.tar.gz,But once try to patch it show like attachment message, is it mean that i no need to do the patching?Or is there any instruction need to remove and reinstall for this files.
View 4 Replies
View Related
May 4, 2011
procedure to apply the 5-2-0-26-4.tar.gpg patch. I don't know how to get the patch file into the ACS server.The procedure in the "Read me" for the patch does not indicate anything about how to this:
1. open CLI console2. define new repository in which the 5-2-0-26-4.tar.gpg resides3. issue: 'acs patch install 5-2-0-26-4.tar.gpg repository YOUR_REPOSITORY'4. verify installation by getting the following version information via CLI by issuing:#show application version acs I don't know how to put the patch file from my local machine to the repository created in the GUI (if there is where the actual place to creat the repository).
View 3 Replies
View Related
Jun 12, 2012
I am trying to apply pach 5 to my ACS version 5.3 using FTP but i receive the following errors after issuing the show backup history command. When i use TFTP, i get a message saying that the file is too big, which i understand 164 MB.
after issuing the show repository "repository name", i get the following error.% Error reading directory on remote server.the patch is on one of my hard drives D, how do i specify on the ACS file path which drive to use?I can only place a url but without specifying which drive.
View 3 Replies
View Related
May 31, 2012
i'm using ACS 5.3.0.40.2 and its setup with an AD External Identity store for wireless PEAP MSCHAPv2. AD is configured with Alternate UPN suffixes so that for example: 22056 Subject not found in the applicable identity store(s). ##
I've checked the release notes for 5.3.0.40.5 and there are some changes/fixes for AD but nothing I can see to explain the behaviour above. I'm looking to upgrade to 5.3.0.40.5 soon but I really need the Alternate UPN suffixes to work.mydomain.com is the AD domain namean Alternate UPN suffix of another.com has been added to AD
A valid AD user can add either the @mydomain.com or the @another.com suffixes to their username and login successfully. This works fine with 5.3.0.40.2 but changes when I upgrade to 5.3.0.40.5 - users who use the @mydomain.com login ok but users using the Alternate UPN @another.com fail with the error: [code]
View 2 Replies
View Related
Mar 26, 2012
I am configuring new ACS 1121 appliance with version 5.3 and wanted to know how to configure Remote Database settings in ACS5.3 Is that necessary to configure that option ?
Also one more thing I can see that ACS 5.3 generates lots of logs is there any solution to reduce such logs. It seems many unuseful logs which are system related are getting logged into device which might no be good for memory requirements of device.
View 6 Replies
View Related
Jun 4, 2011
I have ACS1121 running version 5.1.0.44.6 on my network environement , I need to enable account lock-out for internal user during failed attempt for more than 8 times , How to achieve this . I could see account lock-out for administrator user account , not for internal user .
View 2 Replies
View Related
Jul 24, 2011
We are currently evaluating a ACS 1121 running 5.2, we are trying to configure this to Authenticate eap-peap requests.
Our users will be using credentials in a username@example.com format, if the server sees a request using username@anotherrealm.com then it would forward the request to a external proxy radius server, if the server saw a request for our domain it would strip off the @example.com part and authenticate against AD.
Im finding it hard locating documentation to tell the server if a request comes from a NAS using username@example.com then strip @example.com and authenticate username against AD.
View 4 Replies
View Related
Jul 21, 2011
I'm trying to upload the 5-2-0-26-4.tar.gpg patch to our ACS and so far have been unsucessfull. I keep getting the "please verify the patch bundle is valid".
When I download the 5-2-0-26-4.tar.gpg file, for some reason the download always comes down from Cisco as 5-2-0-26-4.tar.tar. I've renambed the file to 5-2-0-26-4.tar.gpg and verified the MD5.
View 1 Replies
View Related
Jan 7, 2010
I've got 2 freshly installed ACS 4.2 for Windows servers and I need to apply the latest patch rollup before I build the configurations. I stopped the ACS services and ran Acs-4.2.0.124.15-SW.exe to install the patches. The application begins running fine but fails on upgrading the database and then none of the ACS services would start. I was able to restore the files from the backup that runs with the patch utility and get ACS functioning again. What am I missing - does the patch rollup require any specific Microsoft Patches to be installed or something like that?
View 7 Replies
View Related
Apr 14, 2013
We have had an active ACS unit for many years now, and we've added a second one, both are 1121 Appliances. The newer one came with 5.4, so we upgraded the older one to 5.4.
We setup replication between the two, with the newer one primary and the older one secondary. Problem is, windows based clients are unable to authenticate to the older ACS appliance. The only problem we can see is that it indicates that adclient is not running, under Monitoring & Troubleshooting, ACS Health Instance Summary.
So... been trying to figure out how to correct this, yet have been hard pressed to find a knowledgebase article that works. So far, Cisco hasn't added my smartNet on the new box so I can get some support?
View 6 Replies
View Related
May 4, 2011
Need URL for patch 4.2.1.15.3 with comptaible for cisco acs appliance 1120 . Though its for appliance patch should be along with webserver . I have downloaded patch of SE its not comptaible to this hardware .
View 4 Replies
View Related
Jun 5, 2013
Configuration: VM with ACS 5.4 with patch 3. (upgraded from 5.2.0.26 patch 10)When I go on "System Administration" - "Administrators" - "Administrative Access Control" - "Authorization", I got this error:
What I tried:
"acs backup" on this server and shutdown
Install an ACS 5.4 with patch 3 on new VM --> I don't have the problem on GUI
"acs restore" to restore my configuration on new server --> I got this problem again...
I want to use this feature...After this error, others pages generate this error: I have to reload server or restart management service to get him back...How could I solve this? (I don't want to reconfigure manually the server )
View 3 Replies
View Related
