Cisco AAA/Identity/Nac :: 1121 - Configuring ACS To Strip Domain From Request And Sending It To AD
Jul 24, 2011
We are currently evaluating a ACS 1121 running 5.2, we are trying to configure this to Authenticate eap-peap requests.
Our users will be using credentials in a username@example.com format, if the server sees a request using username@anotherrealm.com then it would forward the request to a external proxy radius server, if the server saw a request for our domain it would strip off the @example.com part and authenticate against AD.
Im finding it hard locating documentation to tell the server if a request comes from a NAS using username@example.com then strip @example.com and authenticate username against AD.
View 4 Replies
ADVERTISEMENT
Sep 12, 2011
Within ACS 5.2, does any know of a way to see which specific domain controller a request is sent to?
View 1 Replies
View Related
Aug 26, 2011
Replaced my DLink 655 (had stopped working) with the E4200. Every time I enter a new url, there is a 10 second delay while the 'sending request' message is showing at the bottom of the browser. When the website is connected, there is another 'waiting for xxx' delay for several seconds.I am on a Mac system (laptop and desktop).This never happened with the The delay occurs with wireless or with wired access. Happens with Chrome, Firefox, and Safari. Does not happen if I plug the desktop directly into my cable modem. I have Optimum Boost which is the fastest ISP in the area (possibly the country).I emptied the cache thinking it is DNS problem, works for a few minutes and then back to the same routine. I've tried every setting I know.
What's the use of paying for the fastest internet access and (supposedly) the fastest router if I have to wait 15 seconds each time I visit a website. Frustrating thing is that this sometimes, not always, even happens when I am going back to a page I just visited (back button on the browser).This has to be router issue since it does not happen when my laptop or desktop is plugged directly into the modem. This does not happen to me at work either. It does not happen when I use Cablevision's wireless network in Nassau county.
View 7 Replies
View Related
May 31, 2013
It's impossible to use acs 5.2 recovery DVD to cisco 1121 acs 5.1?
View 7 Replies
View Related
May 15, 2011
integrated the Cisco ACS 1121 with 5.1 and AD and been able to use multiple policies to permit or deny access to different NDG? I am able to authenticate agains AD but I am having an issue with getting the policies to use the user memberOf attribute to set access levels.
View 1 Replies
View Related
Jan 6, 2012
It has been more than a year since a customer bought a Cisco ACS 1121. It was unpacked then and the PAK is lost, no where to be found. Is there any way to retrive the lost PAK ?
View 19 Replies
View Related
Jun 7, 2013
I have a clarification related with ACS 1121. Client needs a solution for ACS feature, instead of investing on ISE Base, is there any model exists as ACS appliance only. I believe ACS 1121 is going to be EOS and it says SNS 3415 is the replacement model .
What I am confused is , It is an ISE as well as ACS and there is separate licensing for ISE (as base and advanced). What should i do , if i need to select SNS 3415 as ACS appliance ? is it built in or should i need to add anything extra ?
View 3 Replies
View Related
May 2, 2011
Newly shipped cisco ACS appliance 1121 has been shipped with ACS version 5.0 , I need to downgrade to ACS version 4.2,0 , I could not see recovery CD or DVD for acs 4.2 along with shipment , Is ACS 1121 appliance is comptaible to acs 4.2.0 version ? .
My ACS BOM details
CSACS-1121-K9
ACS 1121 Appliance With 5.1 SW And Base license
[code]....
View 2 Replies
View Related
Mar 27, 2011
how to configure LAN teaming in Cisco ACS 1121. My requirement is to have virtual IP in the server with two physical IPs in the available 2 interface in the server.
View 1 Replies
View Related
Mar 26, 2012
I am trying to add ACS 1121 (ver 5.3) to monitoring and seems that MIB are missing. Need MIB for this device which I can use in monitoring tool.
View 1 Replies
View Related
Aug 13, 2012
I have 5 installations of ACS appliances (ACS 1121 running ACS 5.3). Is there a way to monitor them via SNMP? The AD client keeps dying on one of them, and even with the newest patch it's not up. Also, i want to monitor them up/down, CPU, memory... basic network monitoring to make sure my devices are healthy.
Any one know if that can be configured? I figured i'd ask here before opening a TAC.
View 2 Replies
View Related
Aug 11, 2011
Is it possible to have Dual NIC on ACS v5.2 such as teaming or any else??
I am thinking of connecting the two NIC on the CSACS-1121-K9 appliance to two switches on the same network, but wondering if it will be possible or not.
View 1 Replies
View Related
Jun 3, 2012
I have an issue with applying a patch to an ACS 1121 appliance running version 5.2.0.26. I have 5 units that needed updating and the first one is the unit with the problem. The subsequent ones updated with no issues.
When I do a show version the 5.2.0.26.10 does not show. When I try to do a reinstall I get back patch all ready exists. When I try to do an uninstall I get back patch does not exist.
Is there a command can wipe out patch 10, so I can start over? The CLI factory-reset only wipes the web configuration not the running-config or IOS.
View 7 Replies
View Related
May 29, 2013
My customer has an ACS 1121 version 5.4. Now we want to install a secondary ACS 1121.
View 2 Replies
View Related
Oct 31, 2012
Im installing & configuring a new ACS 1121. Ive updated to version 5.3 with patch:This temporarily solves my Active Directory problem but i still would like to have the NTP server pointing to the same reference as the Active Directory.
View 1 Replies
View Related
Jan 11, 2012
I have to migrate two appliances ACS SE 1112 under 4.0.1 to new two appliances ACS SE 1121 under 5.2 version.I would like to clarify the procedure to do it by minimizing down time impact.I saw there are Migration Utility and Import Tool but do I need an Intermediate Windows Server to do this migration ?
View 1 Replies
View Related
Jun 20, 2012
I have an ACS Server 5.1 which is used to authenticate my cisco and non-cisco devices. however when I take report on my authentications, the time shown in the report is wrong. However, when I take my mouse pointer to the report , the correct time is highlighted.
View 4 Replies
View Related
May 29, 2013
We upgraded a CSACS-1121 from ACS 5.2 to ACS 5.4 with CLI Application upgrade ACS_5.4.0.46.0a.tar.gz FTP After ACS reboot, services never start... After 15 hours, we always get same message:
ACS/admin# show application status acs
Application initializing...
Status is not yet available.
Please check again in a minute.
We installed patch 5-4-0-46-2.tar.gpg but we got same issue for 2 hours ...What could I do?
View 4 Replies
View Related
Aug 21, 2012
We have 2 CSACS 1121 with Cisco ACS 5.2.0.26.10 The primary server manages 20000+ authentications per day. Its memory utilization increases everyday. It is now at 83% , there a limit?,What will happen when memory utilization reach this limit?,What can we do to purge memory utilization? (reboot, service restart.
View 11 Replies
View Related
Apr 13, 2011
Is it possible to edit the hosts file on an ACS 1121 server running ACS 5.2? Our problem is we have a single domain with multiple domain controllers at different sites. So when the ACS server tries connecting to the domain it randomly picks a domain controller which it can't connect to thus causing it to fail.
View 5 Replies
View Related
Mar 26, 2012
I am configuring new ACS 1121 appliance with version 5.3 and wanted to know how to configure Remote Database settings in ACS5.3 Is that necessary to configure that option ?
Also one more thing I can see that ACS 5.3 generates lots of logs is there any solution to reduce such logs. It seems many unuseful logs which are system related are getting logged into device which might no be good for memory requirements of device.
View 6 Replies
View Related
Jun 4, 2011
I have ACS1121 running version 5.1.0.44.6 on my network environement , I need to enable account lock-out for internal user during failed attempt for more than 8 times , How to achieve this . I could see account lock-out for administrator user account , not for internal user .
View 2 Replies
View Related
Apr 14, 2013
We have had an active ACS unit for many years now, and we've added a second one, both are 1121 Appliances. The newer one came with 5.4, so we upgraded the older one to 5.4.
We setup replication between the two, with the newer one primary and the older one secondary. Problem is, windows based clients are unable to authenticate to the older ACS appliance. The only problem we can see is that it indicates that adclient is not running, under Monitoring & Troubleshooting, ACS Health Instance Summary.
So... been trying to figure out how to correct this, yet have been hard pressed to find a knowledgebase article that works. So far, Cisco hasn't added my smartNet on the new box so I can get some support?
View 6 Replies
View Related
Mar 31, 2013
According to traces collected in mt ACS SE 4.2, it would seem that the underlying software does not support the RADIUS Status-Server request. Is this request type is supported in version 5.*?
View 2 Replies
View Related
Dec 30, 2011
while working with Cisco's CNA (Cisco Network Assistant) on a 2960 switch, any change done by this tool is sent out as an empty set of commands, to a TACACS server to approve.
I have 2960 switch, a PC with CNA on it and brand new ACS 5.2. This switch is set up for TACACS+ authorization. While working with TELNET/SSH, all commands are authorized properly. When doing "debug aaa authorization", you can see the commands are being sent to a TACACS server (as expected) for approval. And what is more important – within the debug output every command appears at "AV CMD= …" and "Arguments = …" Those commands seen by the ACS and approved correctly.But, when working with CNA, those fields (i.e. av cmd and arguments) are empty in the first place. Hence all what ACS does see are "empty commands" and no clue for the correct ones (say, changing interface's description). The HTTP server has it set of authorization commands.
View 6 Replies
View Related
Aug 28, 2012
I have an ACS 5.3 cluster, that is configured to use AD. There are a few wireless devices, and monitoring tools that do not have AD accounts. I would like to configure ACS to first check AD for the user authentication, and if that fails to roll over to the local (Internal Users) identity source where I can define these user accounts.
It seems that when the authentication hits the initial Identity Policy rule, it never moves onto the next one if the first fails.
Attached are screen shots that show how i'm configured for the test, i have a local user defined and I'm trying to log into the firewalls.
- Identity Definition : Screen shot of the main ACS definition for the rule i'm testing that's not working
- Identity Rule 1 : The configuration of rule 1 that if it fails i need it to move onto rule 2.
- Log Output : Screen shot for one of the failed attempts from the ACS View Log server.
Reason I need to configure it this way is:
- Wireless users authenticate to wireless using AD user accounts. Some hand held scanners do not support that and will need to authenticate using the MAC address.
- Authentication to Network devices for managment uses AD accounts. We have some monitoring tools that do not have AD accounts, and will need to be able to log into Network devices to issue some commands (Examples: Cisco Prime LMS and NCS, Infoblox NetMRI).
View 4 Replies
View Related
Jan 10, 2012
Our ACS v5.2.0.26 started to drop connection from wired and wireless connections, with a "Radius Request Dropped" message. The detailed message is : "RADIUS Request dropped : 11051 RADIUS packet contains invalid state attribute".This message is usually preceded with a "RADIUS Request dropped : 24444 Active Directory operation has failed because of an unspecified error in the ACS" error.The communication with Active Directory seems to be ok since worstations are getting a valid ip adress when connected to a non 802.1x switch port (Cisco 4506).
View 3 Replies
View Related
Oct 3, 2012
I have a pair of ACS appliances running 5.1 code. The appliances are set up as a replicated pair. I have valid local and trusted certificate authority certificates on the primary.
The trusted certificate authority certificate gets replicated to the secondary. Obviously the local certificate doesn't get replicated. I need to generate a certificate signing request on the secondary but it doesn't seem to allow you to do it.
View 1 Replies
View Related
Feb 22, 2011
The error message "5405 RADIUS Request dropped", what does it mean ? We have implemented 802.1X on a C4506 switch running IOS 12.2(53), it has worked fine for about 3 months but now I get users not able to authenticate. In the loggs on the ACS I get the obove message.
ACS 5.2 is running 5.2.0.26 Build 3075.
View 6 Replies
View Related
Dec 8, 2011
accounting in ACS 5.3. When I setup accounting on WLC 440x / 5508 ACS takes them as an authentication request and fail.
Here are some logs what I see in acsview:
Dec 9,11 6:05:11.783 PM
Radius authentication failed for USER: navrka2 MAC: a.b.c.d AUTHTYPE: Radius authentication failed
ACS Session ID:
dc2aaa1v/112555963/420
Audit Session ID:
0a9a01d7000001fd4ee23a3d
Tunnel Details:
[code]...
View 4 Replies
View Related
Oct 7, 2011
My company's spent the last few weeks struggling with an issue with their VPN backups where select packets were being lost.
View 7 Replies
View Related
Sep 10, 2012
Is it possible to upgrade the CSACS-1121-UP-K9 to be a non upgrade part? We were going to upgrade from a Windows 4.x to the above Appliance (version 5.x) but there is now a reason to keep the old Windows version running therefore we cannot give the new Appliance the old ACS's licenses?!So we should have (with hindsight) bought a fresh version of the ACS 5.x rather than an upgrade.
View 1 Replies
View Related
Jan 18, 2012
l have a new ACS v 5.2 appliance and l´m trying to join to my domain, but l haven´t could, the acs shows me the Clock skew error, and l was checking some documents about it doesnt work. the acs have the same timezone and time that my domain, but the problem persist
View 7 Replies
View Related
