Wifi Doesn't Work But Local Works

May 26, 2012

I didn't install new program or make a lot of change in my computer lately?Anyway here's the ipconfig/all result of my computer

Windows IP Configuration

Host Name . . . . . . . . . . . . : asus-95bdea2abb
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

[code]...

View 3 Replies


ADVERTISEMENT

Wifi Doesn't Work But Ethernet Cable Works

Apr 4, 2013

I have been using my laptop since a year now and yesterday suddenly my internet stopped working. On top of the connectivity bar a yellow sign appeared. Now my internet status is "No internet access" but when i connect my ethernet cable the internet starts working and i can see the "Internet access" status. I have re-installed my wi-fi driver too from the orignal CD that i got with my laptop, but still no luck also i did not install anything in past 1 week and the only anti-virus i have is Avast (tried disabling it too). I plugged out the cables from my router and plugged them again but that dint work too. There are 2 other laptops (running on windows 7 just like mine) on which the wifi connection is working but on mine it is not working.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Wifi Works But Ethernet Doesn't Work?

May 1, 2013

I have a E4200 v1, connected with a few PCs by ethernet ports and various devices by wifi.  Now the wireless devices work perfectly but sometimes the PC via ethernet ports cannot connect to LAN and internet.

View 2 Replies View Related

Ethernet Cable Doesn't Work / Wireless Connection Sometimes Works

Mar 13, 2013

I try connecting via ethernet cable and it doesn't seem to work until the administrator of the network (my brother) comes home and then turns his computer on and starts using it. However, if i switch to a wireless adapter it sometimes works (like right now) even when my brother is not using the internet. Also, i tried to connect via wifi on my macbook pro to the same server and it used to work flawlessly 100% of the time, now i can only connect once in a while for short periods of times.

View 1 Replies View Related

TP-Link 3G/3.75G Router :: MR3420 - Works In 3g Only Doesn't Work In 3g Preferred

Dec 24, 2012

Region : India
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : Reliance

I've just set up a MR3420. It works fine in "WAN only" mode and provides access via our ADSL modem. It also works fine in "3G only" mode and provides access via a Reliance Netconnect+ USB modem (a Huawei E150 I think). I updated the firmware to the latest version in order to get it to work with the USB modem.

The problem I have is that when I set it to "3G preferred" it doesn't seem to connect over 3G. I can see it tries to connect but then fails and then WAN takes over. The connect and disconnect options are greyed out on the 3G page so I am unable to manually get it to retry. I've tried leaving it for a long time but it doesn't seem to connect over 3G ever. I've tried setting 3G to connect on demand and connect automatically but both behave the same.

View 3 Replies View Related

Wifi Works But Lan Doesn't?

Sep 21, 2012

I just recently bought a Telewell Wlan AP wireless access point and my problem is that I can't connect to the internet with Lan, hence can't get connection on my desktop. My laptop however works fine with wlan.

There's a wall socket which connects to a bigger student local network, I can connect my desktop to it directly and it works so there seems to be nothing wrong with my computer. I've had 2 routers before this, another Telewell that worked flawlessly and a Buffalo that cut the connection every now and then but didn't have this kind of problem.

I have the router plugged into the wall, set to get a dynamic ip (as it should be) and it does find Wan-side ip-address and dns-servers, as I could connect through wifi. So there doesn't seem to be a problem with that either. But for some reason Lan doesn't work. I can access the router through Lan, dhcp is on and I can see my desktop on the routers client list.

View 2 Replies View Related

Wifi Works But Lan Connection Doesn't

Jan 24, 2012

I am running XP Pro SP2 Ver. 2002 on my laptop.,i use the wifi connection very well. But when i plug the rj45 cable in from the modem,the LAN icon says Little or no connection.

View 14 Replies View Related

Cisco Switching/Routing :: 3560-X / USB Console Doesn't Work / RJ45 Works Just Fine

Nov 5, 2012

I've got a 3560-X that passes POST according to console, but there are issues nonetheless...USB console doesn't work. RJ45 works just fine.  No status lights turn on at any point (e.g. syst, xps...). 10g network module is installed with a 10g LRM SFP. All lights on the module are amber. However, it passes according to POST. Switch passes traffic, obeys config, etc. Link lights on RJ45 ports work fine. This was brand new out of the box. Thinking about trying IOS reload..

View 6 Replies View Related

Cisco Switching/Routing :: 6500 - TACACS Doesn't Work Via Telnet / Works Via Console

Apr 18, 2013

I have a pair of OLD Cat6500's running CatOS:
WS-C6509 Software, Version NmpSW: 7.6(16)
Copyright (c) 1995-2005 by Cisco Systems
NMP S/W compiled on Dec 22 2005, 16:37:19
System Bootstrap Version: 7.1(1)
System Boot Image File is 'bootflash:cat6000-sup2k8.7-6-16.bin'
System Configuration register is 0x2
 
I know these are no longer supported, but I have to ready them for migration. Recently a problem began with these switches.  What happens is that when I telnet to them, I cannot authenitcate via TACACS.  This works fine for all our other IOS equipment, just not for these 2 switches.  The error is:" % Error in authentication"  and then I get kicked back to the login prompt.
 
The odd thing is that when I connect to the switch via the console port, I can authenticate fine with TACACS.
CMS> /c 14

[Code].....

View 2 Replies View Related

Cisco Routers :: RV082 DNS Local Database Doesn't Work

Feb 25, 2012

I recently upgraded the firmware to 2.0.2.01-tm (from 2.0.0.19-tm). Now I noticed the RV082's local DNS server ("DNS Local Database" feature) does not work any more. Any URL-IPaddr combo I used to put in there was resolved prior to sending a request to the WAN's primary/secondary DNS server.  It isn't a PC problem. I tested on different real and virtual machines, windows and Linux. Is there new "enable" switch somwhere?

View 3 Replies View Related

Internet Doesn't Work With Cable Nor Wifi

Jul 26, 2011

I've been having this DNS problem for 6 days or so. The internet doesn't work with cable nor Wi-Fi and I've tried almost everything, ping, configuring the DNS, IP, disabling everything, enabling everything, nslookup doesn't work, releasing and renewing doesn't work too, and to make things worst.(In the main computer, everything works just fine and the router settings appear to be correct too, my computer also works perfectly fine in other places with WLAN).

View 14 Replies View Related

Wifi Doesn't Work Until Unplug And Replug The Router?

Apr 16, 2011

Everyday time I log in, the wi-fi says my connection is unidentified or identifying but it always stays like that with the yellow triangle with the exclamation point. So I use the "Diagnose and repair" feature which tells me to either reset the ip address or something or one of my cables is unplugged so I should unplug the modem and router and replug it back it after checking the cables.The resetting the ip address doesn't do jack but if I unplug the router and replug it in, the wi-fi works again...well, until i log off and log back in againI've also tried updating my wifi drivers, run a scan for viruses, and updated all my software. Its been like this for a month now and I just found this site.

View 19 Replies View Related

Dlink Dir-600l - Wifi Doesn't Work When Laptop Is Switched Off?

Dec 31, 2012

i am using dlink DIR-600L wireless router, the problem is i can connect to any device only if my laptop is on, the moment i swtich off my laptop my other devices dont work on wifi

View 2 Replies View Related

Dell Inspiron 1300 - Wifi Doesn't Work On Windows Xp

Nov 18, 2012

I have a Dell Inspiron 1300 which crashed, service tag . I was able to start it again using the Dell Operating System Reinstallation CD for XP Professional with SP1, that came with another computer. I then installed a Windows XP Professional Service Pack 3 and Internet Explorer 8. However the wifi (wireless) does not work. I went to setup and assured that it is enabled. I assume that I have lost the driver for it. Before the crash it had a working wireless connection. I need to know what driver to install to make it operate. Setup indicates that my computer has a MiniPCI card 1370 Broadcom Corp. 

View 1 Replies View Related

Linksys Wireless Router :: E3200 - Wifi Doesn't Work In Proper Way?

Aug 19, 2012

Buy new one Linksys E3200.  Two day using and now have such problem. Every 30 minutes WiFi connection disappears for 10-15 sec. Then appear, but you can't connect to WiFi network for next 30 seconds. Update firmware of router to last version, but it doesn't work.

View 3 Replies View Related

Tp-link 300mbps Wireless :: Tl-wr1043nd Password Protection Of Wifi Doesn't Work

Apr 11, 2013

Region : Netherlands
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :

I installed my brand new TP-Link router and both wired and wireless internet connection work perfectly fine. But when I tried to secure the wifi with a password (I followed the instructions on last page of installation guide) I can not connect to the internet any more. After entering the correct password, both iphone and mac-book simply say "unable to join the network". I selected WPA2-PSK-personal as recommended. For now I switched off the security settings, but I live in a building with many neighbours and they are now consuming most of my bandwidth (apparentlyI am surrounded by illegal downloaders

View 2 Replies View Related

Wireless Internet Works Weird Doesn't?

Jan 15, 2012

hen its wireless, it has no problems with the internet, everything works fine.But when its wired, webpages will still load, but youtube videos wont work, anything that consists of streaming doesn't work, and he cant even useI have connected other laptops to the same cord and there is no problems. so i know its not the cord and i imagine its not the router since everything still works fine with other computers.

View 5 Replies View Related

Home Network :: WAP Works - Switch Doesn't?

Jul 21, 2012

My cable modem and router are in a closet. From there, wires run through the house to multiple locations. One of the locations has had a wireless access point (WAP) installed which has worked flawlessly. I want to put another device at that location that doesn't have wireless capability, so I tried to connect a switch. The switch does not connect. When I disconnect the cable from the WAP and plug it into the switch, the light on the switch port that would indicate a connection does not come on. When I then connect the WAP to another port on the switch, the light on its port does come on but it does not see the router. I've tried multiple cables (I even tried a crossover cable) and I've tried a second switch with the same result. When I plug back into the WAP, it works fine again. The switch works fine at other locations in the house.

One more thing - When I bought the house, the wire to this particular location was unterminated. I had never done any wiring before but I decided to try to do this myself. So, I read up on the process and bought the necessary tools. When I stripped the wires, I found that the twisted pairs were not just twisted (as they were in the patch cable I practiced on) but each pair was in a single strand of insulation (I'm not sure exactly how to describe this but there were four strands of plastic, each with two wires packaged inside.) I didn't know how to separate the two wires that were packaged together so I wired the connectors with all four color - color/white pairs next to each other. I know that's not the standard. But from what I read, as long as I wired both ends of the cable the same way, everything should work. And in fact, it did for connecting the WAP.

View 1 Replies View Related

Internet Works During Day Time But Doesn't At Night

Sep 16, 2012

my internet works normally during daytime but starts to disconnect and reconnect every few minutes at around 11pm. I've tried restarting my modem but to no avail. My home telephone line is not working when my internet starts disconnecting and it starts working during daytime. My modem is connected to the telephone.

View 4 Replies View Related

Cisco VPN :: ASA5505 VPN Ping Works RDP Doesn't?

Mar 23, 2013

I have setup a remote access VPN to an ASA5505
 
I have a directly connected server behind the ASA and I can ping the server without a problem.
 
The VPN client reports packets being encrypted and decrypted
 
However when I try to RDP to the server the encyrpted packets keep incrementing but the decrypted packets do not.
 
I am also not seeing any RDP traffic hit the server (verified by ethereal)
 
I have done a packet tracer and it suceeds but ends with an IP spoof which I believe is correct as it is vpn traffic and not actually being encrypted.
 
This is the debug from the RDP session, I am confused by a Denied ICMP on line 2 as I am able to ping the server?
 
%ASA-6-302013: Built inbound TCP connection 88193 for external:172.16.24.4/50984 (172.16.24.4/50984) to internal:192.168.100.146/3389 (192.168.100.146/3389) (roger_ssl)
%ASA-4-313004: Denied ICMP type=0, from laddr 172.16.24.4 on interface external to 192.168.100.146: no matching session

[Code].....
  
The only logical bit to this is flow closed by inspection? Does this mean the server has not responded?
 
And the decrypt packets not increasing when trying to RDP Does this mean that I have reached the end of my ASA knowledge on this one!

View 6 Replies View Related

Dell :: Neither Wireless Or Local Internet Connection Works For Inspiron Mini 10

Mar 15, 2012

The wireless network never picks up any signals and when I try to plug in to the modem it doesn't recognize the internet either. Is this a driver issue or what?

View 1 Replies View Related

Cisco Firewall :: ASA5520 Why First Ping Works And Others Doesn't

Aug 22, 2012

I have a ASA5520 with 4 Port channel interfaces and ASA Version 8.4.(2). There are many vlan interfaces but in the DMZ I have one Server who has a Static NAT to all other interfaces.
 
Why the first ping works and the others doesn´t work?

View 12 Replies View Related

Security / Firewalls :: Access Via Localhost Works But Through External IP Doesn't

May 15, 2011

I need remote access to certain programs on my home PC but I just cannot get it to work.

Program:- webcamXP

When I set the programs port preferences (i.e. port 8087), I can connect with"127.0.0.1:8087" and webcamXP work fine. But when I replace the localhost with my external IP (lets say 79.149.114.227, so that would be "http://79.149.114.227:8087".I tried port forwarding: I have added the port to my NAT in the router's setting so it should be fine, but it is not (numbers are fictual of course):

external port start 8085,
external port end 8089,
protocol TCP/UDP,
internal port start 8085,
internal port end 8089,
server IP address 192.168.1.215)

I also tried disabling AVG Internet Security 2011's firewall temporarily just to check it it was blocking it, but got the same result.I checked if Windows own firewall was on, but it is off.I cannot find any setting in the router's own configuration screen to disable any build in (router's) firewall (if it has any).

View 6 Replies View Related

N600 Belkin Router - Wireless Works But Wired Doesn't

Dec 25, 2011

I'm trying to set up a wireless network for my parents. I have a Belkin Play N600 router (model F7D8302) that I'm trying to hook up to an Acer desktop running Vista. The modem is a Siemens Speed stream 4100. I have a cable going from the ethernet port of the modem to the modem port on the router. The pc is connected to one of the other four ports in the router. The wireless works fine, but I can't get the wired connection on the desktop working. The Internet light on the modem is not on, but the modem works fine when connected directly to the pc. I've tried power cycling and resetting everything, but it's still not working.

View 9 Replies View Related

Linksys Router E1550 - Wireless Works And Wired Doesn't?

Nov 17, 2011

I have a Cisco linksys router e1550. My wireless network is working fine, but my wired (PC) is not working?

Removing the router and having the modem connected to my PC works but when I put on my router my wired connection only works for a few seconds to none

So I think the router may be causing it, could it be the settings? Even though there at default.

View 1 Replies View Related

Workgroup Works Great When Hardwired To Router / Doesn't With Wireless

Nov 28, 2012

I have a win7 desktop upstairs with all of my media on it.I also have a winXP laptop that I would like to use as a media center running xbmc connected to my tv downstairs.I have set up a workgroup so my laptop can access the media stored on my desktop and everything works great when they are both hardwired to my router (Linksys E3000).However, as soon as I unplug my laptop from my router and switch to the wireless connection I can no longer ping my desktop or access the shared folder (internet still works fine on the laptop, it just cant see my desktop anymore).If I plug it back in to the router, everything works again.

The exact error message I get when I try to access the shared folder is "\INFINITYMedia is not accessable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. [code]

View 14 Replies View Related

Linksys E1000 V2.1 Router - Wired Works But Wireless Doesn't?

Nov 16, 2011

About 6 months ago I bought a new router (Linksys E1000 v2.1) which worked great right out of the box. A couple months later I tried to setup a home network so that my two laptops could access a shared drive on my wired desktop, but for some reason they didn't show up as being on the same network. All computers involved are running Windows 7 if that matters.

Upon a recommendation from I friend I put DD-WRT on the router and it worked fine. Setup MAC filtering and WPA2 Personal security. This worked fine for about 4 months until today.

When I got home from work today I noticed my laptop wouldn't pull up any web pages, but it said it was connected. Then I noticed my iPhone wasn't connected either. I restarted my laptop and then it wouldn't connect to the wireless either (I could see the wireless, but I would get a Could not Connect error when I tried to connect to it).

I went to my desktop and it is working just fine, it is plugged into the back of the router. I also have an AT&T MicroCell (cell phone booster) that is plugged in to the back of the router and it works fine too.

I removed the encryption and MAC filtering. I then reset to factory (or "factory" DD-WRT) and now the wireless works, but it is MUCH slower than my desktop. I ran a speedtest on my desktop and got 12 Mbps down and 1 Mbps up. On my laptop, I get 0.03 Mbps down and 0.25 Mbps up.

View 4 Replies View Related

Local Area Doesn't Have A Valid Ip Configuration

Aug 22, 2012

Randomly today my internet cut out I tried resetting the modem/powering it down etc nothing worked. I then tried the windows network diagnosis and it resulted in this issue "local area connection 2" doesn't have a valid ip configuration. I'm also directly connected to my modem if it matters. I never had this issue today. This issue keeps randomly occuring. I have a modem/router combo

Cisco DPC3825 DOCSIS 3.0 Gateway

View 6 Replies View Related

Local Area Connection Doesn't Have A Valid Ip

Mar 3, 2013

My Ethernet connection all of a sudden does not work anymore. the wireless still works on my laptop. i have restarted everything. change cables.

config /all
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

[code]....

View 1 Replies View Related

Local Area Connection Doesn't Have A Valid Ip Address

May 12, 2012

I had just restarted my computer last night, and may have ended a process on the task manager that might have caused my internet to cease working and this error message to appear. Ive tried resetting the modem/router, resetting winsock and tcp ip whatnot in the command prompt?

View 5 Replies View Related

Local Area Connection 2 Doesn't Have A Valid IP Configuration

Feb 8, 2013

Windows 7 Connects to local network ok, but No Internet Access, i tried to reset dns, tcp/ip, but the same problem appear, but when I'm trying using modem, internet is working fine..i get the yellow triangle with exclamation point in the taskbar saying "No Internet Access". I've tried shutting off the firewall, setting the connection to public, etc. with no change. I've also gone through the Windows Network Diagnostic process and it says... "local Area Connection 2 doesn't have a valid IP Configuration"

View 11 Replies View Related

Local Area Connection Doesn't Have Valid IP Configuration

Sep 20, 2011

Whenever I try to connect Windows XP with Windows 7 I get an error "Local Area Connection" doesn't have a valid IP configuration.

View 1 Replies View Related

Scanner Doesn't Show Up At All In Local Network Devices

Nov 12, 2011

Im working for a client at the moment and I've had to setup a network printer for them, I've got 4 Windows 7 machines easily printing over the network to this printer that is connected wirelessly but they want one of there machines to use the scanning functionality of the printer.The scanner doesn't show up at all in the local network devices like the printer does and to be honest i don't really have any experience with scanning over a network to a windows 7 machine, but this printer does support scan to ftp so my idea is to setup a small ftp server on the windows 7 machine with a folder to stored scans on the desktop or something, then put the details of the server in to the printer making it as easy as possible for the customer to scan stuff and just get it from the folder on the desktop, i could also share this folder over the network for anyone to open and get a scan if needs be.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved