I have been using my laptop since a year now and yesterday suddenly my internet stopped working. On top of the connectivity bar a yellow sign appeared. Now my internet status is "No internet access" but when i connect my ethernet cable the internet starts working and i can see the "Internet access" status. I have re-installed my wi-fi driver too from the orignal CD that i got with my laptop, but still no luck also i did not install anything in past 1 week and the only anti-virus i have is Avast (tried disabling it too). I plugged out the cables from my router and plugged them again but that dint work too. There are 2 other laptops (running on windows 7 just like mine) on which the wifi connection is working but on mine it is not working.
I try connecting via ethernet cable and it doesn't seem to work until the administrator of the network (my brother) comes home and then turns his computer on and starts using it. However, if i switch to a wireless adapter it sometimes works (like right now) even when my brother is not using the internet. Also, i tried to connect via wifi on my macbook pro to the same server and it used to work flawlessly 100% of the time, now i can only connect once in a while for short periods of times.
I have a E4200 v1, connected with a few PCs by ethernet ports and various devices by wifi. Now the wireless devices work perfectly but sometimes the PC via ethernet ports cannot connect to LAN and internet.
I have a cable that is not working on the router end or the computer end. Could I have the wrong cable? The writing on the package is: Category 5E patch cable 350 MHz UTP Standed 24AWG PVC jacket, molded boot. 50U" plugs complies with FCC part 68Cat5e patch cable, RJ45-RJ4524 AWG stranded, 568B
I have a Belkin usb adapter to pick up my wireless internet. problem is when i choose my network to connect to it constantly says "acquring network address". But as soon as i plug in an ethernet cable from the router the wireless starts working and i just unplug the ethernet cble. So why does my wireelss card depend on my ethernet conenction?
I have Lenovo laptop and my internet works just fine when the cable is connected but Wifi does not work. It shows that i have excellent signal on the side but it just wont connect. When i type in password it says " Windows cannot connect to XYZ ". I use Windows 7 and my wireless network adapter is Atheros AR9285.
C:UsersMY>IPCONFIG/ALL Windows IP Configuration Host Name . . . . . . . . . . . . : MY-PC
I've been having this DNS problem for 6 days or so. The internet doesn't work with cable nor Wi-Fi and I've tried almost everything, ping, configuring the DNS, IP, disabling everything, enabling everything, nslookup doesn't work, releasing and renewing doesn't work too, and to make things worst.(In the main computer, everything works just fine and the router settings appear to be correct too, my computer also works perfectly fine in other places with WLAN).
Region : India Model : TL-MR3420 Hardware Version : V1 Firmware Version : 3.12.21 Build 120523 Rel.37880n ISP : Reliance
I've just set up a MR3420. It works fine in "WAN only" mode and provides access via our ADSL modem. It also works fine in "3G only" mode and provides access via a Reliance Netconnect+ USB modem (a Huawei E150 I think). I updated the firmware to the latest version in order to get it to work with the USB modem.
The problem I have is that when I set it to "3G preferred" it doesn't seem to connect over 3G. I can see it tries to connect but then fails and then WAN takes over. The connect and disconnect options are greyed out on the 3G page so I am unable to manually get it to retry. I've tried leaving it for a long time but it doesn't seem to connect over 3G ever. I've tried setting 3G to connect on demand and connect automatically but both behave the same.
I just recently bought a Telewell Wlan AP wireless access point and my problem is that I can't connect to the internet with Lan, hence can't get connection on my desktop. My laptop however works fine with wlan.
There's a wall socket which connects to a bigger student local network, I can connect my desktop to it directly and it works so there seems to be nothing wrong with my computer. I've had 2 routers before this, another Telewell that worked flawlessly and a Buffalo that cut the connection every now and then but didn't have this kind of problem.
I have the router plugged into the wall, set to get a dynamic ip (as it should be) and it does find Wan-side ip-address and dns-servers, as I could connect through wifi. So there doesn't seem to be a problem with that either. But for some reason Lan doesn't work. I can access the router through Lan, dhcp is on and I can see my desktop on the routers client list.
I'm visiting my friend at her apartment and her internet only works through an ethernet cable. I unplugged the cable from her computer and plugged it into mine and it worked perfectly but when we switched it back to her computer her internet takes forever to identify and ends with local only connection how do we fix her computer?
I recently finished my basement and put together a home entertainment system. I ran ethernet through the walls to a wall jack. I plugged my laptop into it and it tested good (internet worked and pinged my router 1ms time & 64 TTL.) I put an A/V rack in front of it and brought down my Netgear GS605 switch, XBox360, BD player that had all been on the network upstairs and added a new LAN capable receiver. None of those components will recognize the network. Light doesn't light on the switch(neither amber nor green,) Xbox doesn't recognize a cable is even plugged in. I unplug the switch and using the same cables my laptop picks it up just fine. I bypassed the switch and went strait to the other A/V gear and none of them recognize the network.By the way, the switch is auto detect between patch/crosssover. The IP settings are all the same from when the gear was connected upstairs.
I am running XP Pro SP2 Ver. 2002 on my laptop.,i use the wifi connection very well. But when i plug the rj45 cable in from the modem,the LAN icon says Little or no connection.
I've been using the Linksys router e1000 N type for a week now and it hasn't beeen such a great experience. The thing is when i connect the modem to my laptop via ethernet cable internet works but not when i connect the cable to the router even though this worked before. actually a few hours before. so i dont know whats happened to my router since clearly the problem is in there. the modem has lights for PC Cable DATA and POWER. The lights to all of them blink when i have connected the modem directly to laptop but the PC light is non existent when i connect it to router. hence i get no internet access. the routers power is on so i dont know what the prob is ive rebooted it a few times but to no avail.
I have a 80ft cat5 ethernet cable I got cut at compusa about 3years ago to go across the house to my room. I used to have an a really old computer but about 6months ago I bought a brand new top of the line computer and got really excited and set it up on my desk in my room to discover my ethernet cable wasnt being detected on my computer. The weird part is that it works with other computers.. I had my gf's laptop(3yo) using it, my dads(3yo), my older computer that I dont use anymore but whenever I connect mines it doesnt work.I test hooking up a few different cables to my computer and they work but that one specificly wont.
I've got a 3560-X that passes POST according to console, but there are issues nonetheless...USB console doesn't work. RJ45 works just fine. No status lights turn on at any point (e.g. syst, xps...). 10g network module is installed with a 10g LRM SFP. All lights on the module are amber. However, it passes according to POST. Switch passes traffic, obeys config, etc. Link lights on RJ45 ports work fine. This was brand new out of the box. Thinking about trying IOS reload..
I have a pair of OLD Cat6500's running CatOS: WS-C6509 Software, Version NmpSW: 7.6(16) Copyright (c) 1995-2005 by Cisco Systems NMP S/W compiled on Dec 22 2005, 16:37:19 System Bootstrap Version: 7.1(1) System Boot Image File is 'bootflash:cat6000-sup2k8.7-6-16.bin' System Configuration register is 0x2
I know these are no longer supported, but I have to ready them for migration. Recently a problem began with these switches. What happens is that when I telnet to them, I cannot authenitcate via TACACS. This works fine for all our other IOS equipment, just not for these 2 switches. The error is:" % Error in authentication" and then I get kicked back to the login prompt.
The odd thing is that when I connect to the switch via the console port, I can authenticate fine with TACACS. CMS> /c 14
My computer worked fine on the eithernet, but I had to move it to a different room and now it won't recognize ANY WIFI connections. I know the wifi is working because I have laptops and phones connected to it. the computer is only 8 months old. It's an HP Pavillion AMD Phenom II 820 Quad-Core Processor, Windows 7 64 Bit, Wireless LAN 802.11b/g/n.
I can't seem to connect to the internet via the Ethernet port on my laptop, but the built-in Wi-Fi card works perfectly fine. I normally use Wi-Fi, as our signal is very strong, even if I go outside and up the road, I can still connect.
My issue is that although I don't need it, I'd like to setup Ethernet for the first time since installing Windows 7. I've had Windows 7 since April 2011, and prior to that I used Windows Vista. From memory, I don't think Vista had any problems with connecting via Ethernet back before I moved house, but this was over two years ago.
My laptop is an ASUS X58L, and the NIC identified by Device Manager, is a Realtek RTL8139/810x Family Fast Ethernet NIC. Going into the properties, I can see that I have the latest Windows 7 driver installed - 6.111.723.2009, however prior to this I had the driver that came with the machine (when it was running Vista), which was 6.108.331.2008 and tried updating from Device Manager, but for some reason it said that I had the best driver already installed. To install the 2009 Windows 7 driver, I had to manually download it from Realtek. With either of the drivers, connecting via Ethernet doesn't work, and I'm confused as to what to do next.
Would a Linksys USB300M Network Adapter allow my computer to connect to the internet via Ethernet? My computer has an Ethernet port that doesn't work. I need Ethernet connection to connect to the internet through FIOS. I currently use an USB port on my computer to connect using DSL. I want to purchase a USB-Ethernet adapter that plugs into my USB port but has an Ethernet jack at the other end: USB300M Network adapter - Hi-Speed USB
My parents have a windows 7 desktop with ethernet plugged in for internet. I use a Asus EEE 1005HA with jolicloud. They do not have wireless, only wired internet. When I plug in the ethernet cable, the netbook doesn't recognize the internet access. Nothing wrong with the ethernet port on the netbook, as i've used wired network at my dorm and the port does recognize the ethernet cable at my parents' house.
Also, is it possible to use the desktop as a sort of wireless router? Would connecting a usb wireless dongle to the desktop allow me to connect my netbook to the internet via the desktop?
My pc has a on board ethernet adaptor that stopped working all of sudden... I have no idea about what to do... I tried to check if there were any problem with a driver or something but the nic isn't even detected by the pc..
lost wireless to all wireless devices (laptop, iPhone and iPad). Still have hard wired ethernet internet access from desktop. Tried resetting router, powering off router, resetting and powering off cable modem. Nothing works. Lights on router all on.
I have the Linksys WRT54G Wireless Router, when i hook my at&t modem to the modem port on the router the wireless portion of the router works, when i plug any pc into the Ethernet ports it doesnt work!If i plug the modem into the Ethernet port and plug other pcs into the other existing Ethernet ports it works by Ethernet but not wireless.
my computer just randomly stopped connecting to the intenet. I checked my other computers and phone and found they were all working fine. I was having internet problems pior to this happening (internet was being very slow and some web pages and some videos wouldn't load. I think the latter had to do with flash player though.) I had also been doing some stupid stuff on my comp that I know can give you viruses. Furthermore I also knew that due to previous virus's I was not able to do a restore. So as you have probably gathered my computer was pretty buggered even before this problem. So decided to restore to factory default using some backup images I made when I first got the comp. That went smoothly however the internet stilll doesn't work unless I plus it in using a ethernet cable.
I recently moved into the dorms of my college and tried connecting my laptop to the internet using an ethernet cable. It worked, so I decided to try and play Xbox Live through the use of the ethernet cable and it did not work. After messing around with it and failing to get it to work for my Xbox 360, the ethernet decided to quit working for my computer as well. (To try and get my Xbox to connect to the internet with the ethernet cord, I tried network bridging by bridging the ethernet connection with the wireless connection, then unplugging the ethernet cable from the wall so as to connect it from my laptop to Xbox 360. This didn't work so I just deleted the bridge. This is when the problem started happening as the local connection stopped appearing.) I am able to plug it in and see that in the Network and Sharing Center, however, it shows up as being unplugged. After a couple seconds though, it disappears. If I click on it fast enough, it shows up with an Error Code 45 after looking at the properties. I have tried typing in ipconnfig /all and the ethernet connection doesn't show up there either.
I tried 3 cables, and even one of them was new. So im sure the problem isn't the cables. For some reason, whenever I connect a ehternet cable to my computer, I cannot seem to get internet connection through it. Some days ago I installed this Wireless Lan device from a CD, that came with a sort of antenne I had to put on my computer. It works great, BUT its slow. Thats why i would like to go on internet with cable again. I remember one day to another that my computer didn't detect the cables anymore, what could be the problem?
I have a dell Inspiron 8000. The computer will not detect the onboard ethernet jack? It does not show up in the devices list. The lights for activity will not come up when I plug an ehternet cable in to it either..
I have noticed that on my WAG120N the WPS function doesn't work as it should (...at all). I tried connecting a blackberry, a playstation3 and 2 different laptops using the WPS option (button or PIN, doesn't matter) and the devices would simply not talk to each other. I can understand problems with the PS3 but the blackberry and the laptops were (and still are) able to connect using WPS on my previous router - WAG54G2. Pairing of the devices by supplying a password works fine, this is a problem only with the WPS functionality. My firmware is V1.00.16.
I purchased Linksys WAG160N (from a store) and I also have 7 Linksys SPA962 VOIP phones provided by MyNetPhone with service included. All tests we found out that this modem doesn't work with this VOIP phones. Somehow probably doesn't give access to MyNetPhone servers to get connection with this phones.I purchased an other one from DLINK and works perfect?
I have a Dell Precision 340 and I went to connect my modem and wireless router to the PC via my ethernet cable. When I hook it up, my computer says new hardware ethernet controller and wants me to add it. When I try to add it, it will not let me and wants me to add the hardware via a disk or CD rom, which I don't have. Because I can't get the ethernet cable to work on the PC I can't get internet, however the wireless router still works......
Everyday time I log in, the wi-fi says my connection is unidentified or identifying but it always stays like that with the yellow triangle with the exclamation point. So I use the "Diagnose and repair" feature which tells me to either reset the ip address or something or one of my cables is unplugged so I should unplug the modem and router and replug it back it after checking the cables.The resetting the ip address doesn't do jack but if I unplug the router and replug it in, the wi-fi works again...well, until i log off and log back in againI've also tried updating my wifi drivers, run a scan for viruses, and updated all my software. Its been like this for a month now and I just found this site.
I am running windows xp on an old desktop, I am using a wiresless usb adapter to utilize a wifi connection available in the dorms. to connect, i have to enable proxy on the browser I am also using an Ethernet connection via a LAN cable, which does not need a proxy to run
The issue is that although i browse freely using both connections simultaneously by using two different browsers, with the proxy setting enabled in one and disabled in the other, i can not run uTorrent when both connections are enabled. i have to go into network neighbourhood and disable the wifi connection, and only then does downloading start. the university does not allow bit-torrent downloading on the wifi connection so i have to use the ethernet.
