Convert Wired IP Phone To Wireless?
May 22, 2012I have a wired IP phone connected to my company network, in my home office. How can I convert this to wireless so I may use other rooms in the house to work in?
View 1 Replies
ADVERTISEMENT
Routers / Switches :: How To Convert From Wired To Wireless
Mar 20, 2011I'm trying to upgrade my existing Netgear wired router to a Netgear N600 wireless router. I was really hoping just to replug in everything and go. But because the wired router is setup for 192.168.1.1 when I plug in the wireless router it thinks nothing is plugged in because it too wants to use that IP address. How do I disable the wired settings
View 7 Replies View RelatedLan Port For Wired Connectivity - Convert To Wifi / Wireless?
Oct 19, 2012I have an equipment which has LAN port for wired connectivity to the computer. I can connect 10 such equipment thru LAN to the computer & display the data of all the equipments on computer screen. This LAN network I wanna convert to Wi-fi/wireless.
View 4 Replies View RelatedCisco WAN :: 3825 Convert Phone Calls From PSTN To SIP
Jan 5, 2011We have a Cisco Router 3825 which we use to convert phone calls from PSTN to SIP.Can any one suggest us (or point to a documentation) as to how can we use this router as a load balancer (to balance load among different SIP terminals) ?
View 3 Replies View RelatedLinksys Wired Router :: BEFSR41 - Convert Wired Router To Hub?
Jun 16, 2011I have an old BEFSR41 ver. 2 wired outer that I'd like to use with a motorola modem/router as a hub. Is this doable?
View 2 Replies View RelatedWireless :: Convert The Same ADSL Wired Modem Into A Wireless Modem For Laptop
Mar 15, 2012I have Desktop and Laptop connected to a Huawei-make,Model No Smart AX 882, ,via ethernet & USB port. Is it possible to convert the same ADSL wired modem into a wireless modem for my Laptop. the type of hardware to be used (e.g., wireless access point or a wireless router) through my USB port in the wired modem? what is the configuration change I have do in my wired broad band modem?
View 1 Replies View RelatedNew Home With Cat5e Only Wired For Phone
Mar 12, 2011I have CAT5e running through out the house. They all start at a 4x10 telecom punchdown module and end with non standard jacks. When I unscrewed a few wallplates, only the orange, white orange, blue, white blue are connected. The greens and browns are snipped off. I don't much care if I have a telephone or not (my cell phone is my only phone), I'm thinking of pulling all the cat5e off the module and attaching RJ45 plugs on them. Seeing that only the wires I mentioned above are connected at the wallplates, do I need to terminate all the wires on the RJ45 plug or only those four?I'm not planning on going up to a 1gb connection right now because I only have 20mb service anyways. Also, will I still received data only using those four wires?
View 9 Replies View RelatedLinksys Wired Router :: RV042 - Convert EXP To Config File To Restore Backup Into New Router
Jun 7, 2011I have a problem with the router Linksys RV042, I made a backup of it that contains a file with the extention .exp Now we have buy a new Rv042 made by cisco and the backup file is .config the question is how I convert the .exp file to a .config file so I can Restore the backup in to the new router?
View 1 Replies View RelatedLinksys Wired Router :: BEFSR41 Fed From SPA2102 VoIP Phone Adapter
Oct 15, 2011A broadband cable modem is connected to the input of a new BEFSR41 4-port router. The router feeds 4 computers (a newer "primary" PC, and 3 secondary "old goats" that I use to print online grocery coupons). The 4 PC's are networked to share a common printer, a single directory on the "primary" PC, and using a 4-port KVM switch - I switch a single keyboard and mouse to whichever PC that I am using at the time.
View 1 Replies View RelatedLinksys Wired Router :: How To Set Up RVS4000 QOS Settings To Work With VOIP Phone System
Dec 15, 2011How to set up RVS4000 QOS settings to work with a VOIP phone system? I need to get the QOS active on the VPN so that a remote office with VOIP phones can reach the PBX at the main office over the Internet connection.
View 1 Replies View RelatedCannot Connect Wirelessly On Phone But Can Connect Wired On Pc
Feb 13, 2013I'm connected to a wifi at home on my cellphone, says signal status is excellent, 54mbps, wpa psk security but I cannot connect to the network. My desktop pc is connected via ethernet and it is working. I tried connecting to a neighbor's wifi and it worked on the same cellphone. WLAN light is flashing, the rest are solid. I have a prolink adsl router.
View 1 Replies View RelatedConvert WRT 54 2 To Wireless Bridge?
Apr 27, 2011How do I convert an old WRT 54G 2 to a wireless bridge.
View 1 Replies View RelatedWireless :: Convert A 3G Dongle Into Hotspot
Sep 23, 2011is it possible to convert a 3G donugle into a hotspot?? i tried converting my LAN into a hotspot and it works. wondering if it is possible to do the same with my 3G doungle.
View 1 Replies View RelatedConvert Ethernet Port Into Wireless?
Sep 3, 2011My daughter is going to university. An Ethernet connection is provided but she wants to work wirelessly. Is there a gadget to attach to the Ethernet port that will create a wireless signal for her to connect her iPad and PC laptop?
View 4 Replies View RelatedConvert 802.11a To 802.11g Wireless Network Device?
Feb 13, 2013It is possible to convert 802.11a to 802.11g wireless network device. I wireless outdoor cpe which is work on 802.11a...i want to convert it to G network
View 3 Replies View RelatedConvert Cable Network To Wireless Net?
Aug 1, 2011i want change my Cable Network Station to Wireless Network
View 1 Replies View RelatedCisco Wireless :: 1262 AP Convert To LAP?
Mar 13, 2012Is it possible to convert autonomous access point Cisco 1262 to LAP?
View 9 Replies View RelatedConvert RJ45 To Wireless Using A ADSL Router?
Mar 14, 2012I have an ADSL router like the one showed below & internet from the provider via a RJ45 cable.
I need to share the incoming internet from the RJ45 cable to the remaining three RJ45s & over the wireless. How to configure the router to get this working?
Also the internet provider needs me to authenticate via their default webpage before I can access the internet & I can say it doesn't have any MAC binding.
Convert A Ethernet Port To A Wireless Modem?
Sep 16, 2011watch netflix on my tv,which has netflix,but has a Ethernet connection,and must use a rj45 cable,can I change it over to a wireless signal,so I won';t have to use a cable?
View 1 Replies View RelatedConvert Wireless Router To (Access Point)?
Oct 29, 2011How do I convert my wireless router to a wireless AP (Access Point)?While connected to the main router go Start then Run in XP - (Windows key plus R in Vista and Windows 7), then type in the following, including all the spaces:- cmd /k ipconfig /all -- then press Enter and from the black form that shows up, take a note of the numeric code beside the word "gateway" -- usually something like 192.168.0.1. Type exit to close the black form.Now connect the router to be converted only to a computer via network cable and log in Setup the wireless security Disable the DHCP and change the LAN IP to match the gateway IP but ending in something like .253 Finally connect one of the four LAN ports of the AP to the main router, do NOT use the WAN port.
View 4 Replies View RelatedConvert Brother Dcp 7020 Printer For Wireless Use?
Jun 28, 2012I want to do wireless printing and wonder whether, in stead of buying a new printer, I can do something to convert my Brother DCP 7020 for wireless use.
View 2 Replies View RelatedHow To Convert A Ethernet RJ45 Port To A Wireless One
Aug 7, 2012Hotels have wired LAN connections and not wireless. Is there a device that will plug into the ethernet cable and offer wi-fi for more than one laptop/smart phone in the hotel room?
View 1 Replies View RelatedCisco Wireless :: AIR-AP1042N-x-K9 - Convert Aironet AP To LAP?
Apr 21, 2013I would like to know is it possible to convert a Cisco Aironet AIR-AP1042N-x-K9 to LAP ?
View 3 Replies View RelatedConvert Belkin (F5d7234-4) Router Into Wireless Receiver?
Nov 12, 2011I have a Belkin f5d7234-4 lying around at home. I also have a Panasonic TV which requires a proprietary wifi donge to get a wireless signal, so my question is, can I use the router to recieve my house Wifi (broadcast by my new NetGear Router) and send it out through its Ethernet port to the TV?
I checked, the router doesn't have ddwrt support, I'm new to hacking around with routers and networks, so I don't know how to do this, I see how it is logically possible
Cisco Wireless :: Convert Capwap 1142 To Autonomous
Mar 28, 2012I have an 1142 running capwap c1140-k9w8-tar.124-23c.JA4 that I am wanting to convert to an Autonomous AP.However, the AP does not seem to have an archive exec command to tftp downoad an new IOS.Is there another procedure that should be used ?
View 7 Replies View RelatedCisco Wireless :: Convert A 1602i From Lightweight To Autonomous?
Feb 28, 2013how to convert a 1602i AP from lightweight mode to autonomous?
View 3 Replies View RelatedCisco Wireless :: Convert Aironet 1310 Autonomous To LAP?
Apr 22, 2012Is it possible to also upgrade the 1310 series cisco ap's from autonomous to lwap without using the upgrade tool, if so what procedure do I follow? The upgrade tool required to have telnet enable on the controller which I can't break the policy
View 1 Replies View RelatedCisco Wireless :: Can AIR-SAP1602I Convert To Ctrlr-based AP
Apr 17, 2013AIR-SAP1602I is a Standalone AP (Fat-AP), can we convert it to Ctrlr-based AP(Thin-AP) via install another IOS ?!In contrast, can we convert AIR-CAP1602I to be a Standalone AP ?!
View 5 Replies View RelatedCisco Wireless :: 1811W Router - Convert To Lightweight?
Nov 11, 2012We have a couple of smaller remote locations running cisco 1811W routers (built in switch ports & wireless).Now I have been tasked with determining if the wireless portion can be converted to Lightweight or not; if so what is required.
I am running
WCS 7.0.230.0
WLC 5508 (same code)
Cisco Wireless :: Air-lap-1131-ag-e-k9 - How To Convert To Autonomous Mode
May 7, 2013i have a air-lap01131-ag-e-k9 that was originally in lightweight mode and configured with a controller, but i am in the process of wanting to convert to autonomous mode, i am having issues with connectivity to the AP from my laptop.
i have followed numerous guides on this forum, i have successfully
downloaded correct firmware
renamed the firmware to .default
placed this in root of tftp server folder
connected laptop via console to view output
connected laptop via Ethernet to Ethernet port of AP
changed static ip on laptop to 10.0.0.2 set subnet mask to 255.255.255.0, default gateway to 10.0.0.1
held reset button on AP when applying power and waiting for radio light to flash red
AP gets a IP address then of 10.0.0.1
But even though both laptop and AP are in the same subnet, i am unable to ping the AP from my laptop and it doesn't start the tftp process
I have disabled firewall etc, and tried with both crossover and straight through cable, it seems there is something missing at this last stage, i even tried on a second laptop but that would not ping either, am i missing something.
Cisco Wireless :: AP1141 Convert From Autonomous To Lightway
Mar 26, 2012I have an AP 1141N-A-K9, from autonomous system, with this IOS ( c1140-k9w7-mx.124-21a.JA1), and a WLC 5508 with Version 7.X
I want to convert this AP to lightway to use with this controller.
I download de Version of IOS (c1140-rcvk9w8-tar.124-21a.JA2.tar) from cisco and the upgrade tool. but when I start the process in the upgrade tool the result is "this version is not supported by the upgrade tool", it pass all the requested information but show this error at the end.
Cisco Wireless :: AP 2602i - Convert Autonomous AP To Lightweight?
Nov 10, 2012Is it possible to convert an Autonomous AP 2602i to Lightweight just changing firmware as the first generation Aironet APs?
View 2 Replies View RelatedCisco Wireless :: Convert Autonomous 1142N To Lightweight?
Apr 15, 2012Apparently converting autonomous 1142N to lightweight is not supported by ether WCS 7.0 or the Upgrade tool. The option is to do it manually with CLI, but there is about 200+ AP's that need converting. We can't do them all at the same time. We have to do it building per building.
View 4 Replies View Related