D-Link DAP-1522 :: Can't Bridge PC Or Printer

Mar 12, 2012

I have a WIN XP desktop which I successfully connected to the 1522 AP - as evidence of the GUI to program it.  I have the 1522 set to Bridge Mode via the switch on the unit.  The 1522 has hardware version B1 and Firmware version 2.000.  I joined my wireless network successfully as evidence of the Status page showing it's successfully connected and bridged to my network.  I then disabled my USB wifi NIC in hopes of using my hardwired connection to the 1522 to get on the internet.

Wireless Radio : Enabled
Bridge State : Connected
MAC Address : fc:75:xxxxxx
802.11 Mode : Mixed 802.11a, 802.11g and 802.11n
Band Width : 40
Channel : 6
Network Name
(SSID) : cleveland
Wi-Fi Protected Setup : Enabled
Security : WPA2-PSK

View 3 Replies


ADVERTISEMENT

D-Link DAP-1522 :: Simultaneous Bridge And AP Function

Oct 26, 2011

I already have a DIR-855 and was considering using a DAP-1522 in conjunction to bridge my 5GHz N to my living room to feed HD media to my PVR box and also feed wired-only clients like my TV and BR player. But, in my new flat I find that the walls are pretty thick and my wifi signal is dropping off pretty quick, so  I was wondering if you can configure the DAP-1522 to simultaneously be a wifi bridge to feed my media clients, and an AP to feed any laptops that might be in use in the living room?

View 1 Replies View Related

D-Link DAP-1522 :: Bridge Mode In Next House

Apr 13, 2011

I m setup for my brother's next house. He wants to use to share with my internet access. I do have 2wire modem provider that has wireless capability in my house. So he have DAP-1522 [bridge mode] and adjust in Wireless Setting, to use SSID manual, (Bell9**) WPA. It s successful, and works well. Problem is cannot use wired to computers, blu-ray, Xbox 360 in same time. it will disconnect frequently because in bridge mode doesn't have DHCP reserved?

My bro bought other one is DIR-655.  DAP-1522 keep in [bridge mode] to link to DIR-655 (Static IP), and setup DHCP Reserved.  He feel relief that works very well and have no problem with any computers and devices doesn't disconnect anymore. my question is why DAP-1522 doesn't have DHCP reserved when bridge mode that connected to any providers modem?

View 1 Replies View Related

D-Link DAP-1522 :: Bridge Mode - Cannot Ping DIR-615

Nov 23, 2010

I am running a DAP-1522 (v1.21) in Bridge mode with a DIR-615 (1.00VG).  I have configured the DAP-1522 to access the WiFi network and can see it connects correctly.  I have a PC connected to the DAP-1522.  Most of the time I can ping the DAP-1522 from the PC but cannot ping the DIR-615.  Occasionally when I reboot everything again I can ping the DIR-615 and get full internet access but this usually only lasts  a minute or so then it drops.  After that I can only ping the DAP-1522.  The DAP-1522 always says the Status is "connected" though.

The IP addresses are as follows:
DIR-615: 192.168.0.1
DAP-1522: 192.168.0.50 (static)
PC: 192.168.0.55 (static)

View 9 Replies View Related

D-Link DAP-1522 :: Using As A Bridge With WNDR3700 Router?

May 20, 2011

I've been playing with this setup for over a month with no real success.  I'm trying to use the DAP-1522 as a wireless bridge to provide connectivity to my entertainment center which consist of a PS3, Directv DVR and Internet ready TV.  I tried the setup as described in the manual, but not getting to the internet.  Initially I was able to connect the 1522 as a bridge, but the connection kept dropping, especially anytime I actually used the internet (downloading a VOD movie).  While troubleshooting the dropping issue, I changed all the 1522 settings and now it cannot access the internet at all through.  The WNDR3700 is routing my home network fine...it is setup on the 192.168.1.x address space.  I understand the 1522 came setup for 192.168.0.x, is the 192.168.1.x/192.168.0.x thing jacking things up?  I initially had the 1522 setup with the 192.168.1.x IP from my home network and the gateway set to my WNDR3700 (192.168.1.1)...should it be on the 192.168.0.x?  I have updated the firmware to 1.31. 

View 2 Replies View Related

D-Link DAP-1522 :: Does WoL Work If PC Is Behind Wireless Bridge

Jan 28, 2010

I want to send a WoL (wake on lan) packet to power up a PC which is wired to DAP-1522.  The DAP-1522 is connected to my DIR-655 router wirelessly.  So far, I have no luck.  Do you know if the DAP-1522 is capable of passing the WoL?  Does it need a firmware upgrade before it can do so? 

View 7 Replies View Related

D-Link DAP-1522 :: Cannot Setup From Bridge Mode

Nov 22, 2011

I turned it on for bridging and it did not auto setup wireless so i need to turn off WPS but my wireless option page is now blank. I rebooted, reset the DAP but still no manual config option. I found I could configure it if I switched it to AP mode but still cannot setup from bridge mode. According to manual a reset does not turn off WPS so what is the answer?

View 1 Replies View Related

D-Link DAP-1522 :: Loses Bridge Connection When Powered Down / Up?

Apr 17, 2011

It took a while but I've had my 1522 running well for several days. However, if I power down and then power up the 1522, it never reconnects. The bridge mode light flashes 5 times, then - nothing.

So, I have to disconnect everything, bring the 1522 back to my main PC, attach it, let it connect properly, then unattach and re-attach at it's use site.

(I'm using a static IP address and a Cisco E3000 router working perfectly with all my other stuff. Firmware v1.31)

View 1 Replies View Related

D-Link DAP-1522 :: A1 Bridge Mode Disconnect Randomly

Nov 28, 2012

If you are using DAP-1522 A1 and set to 5GHz 802.11 n bridge mode but disconnect randomly. Don't bother to do any troubleshooting because DAP-1522 A1 only support 802.11 draft n and incompatible with 802.11 n. If unit still under warranty then call D-Link and request unit replacement and ask for hardware reversion B1.

A1 - Ralink RT2880+RT2850 chips
[URL]
B1 - Ralink RT3662 chip
[URL]

View 6 Replies View Related

D-Link DAP-1522 :: Wireless MAC Cloning In Bridge Mode?

May 16, 2011

I'm running the 1522 as a bridge with v1.21 firmware.  I have 2 devices wired to it. I have Wireless MAC cloning disabled (not checked). If I scan my network using a tool such as ipscanner (http:url.....) the devices attached to the bridge are being listed with the 1522's MAC address - not their own.

The connected devices should be showing up with their own MAC addresses.  The 1522's address should only be displayed IF MAC cloning is enabled and IF the cloning mode is set to Auto - is my understanding of this feature incorrect or is my 1522 not performing as spec'd?

View 7 Replies View Related

D-Link DAP-1522 :: Bridge Mode Connection Settings?

Apr 25, 2012

I currently have a DAP1522 in Bridge mode with a DIR655.  I am only using the 2.4GHz G mode on my 655.  In a few days I will be replacing the 655 with an 825.  When I log into the 1522 I don't see any settings for Mode, Frequency or Width (while in Bridge mode).  The page for wireless setup is blank except for the "Save Settings" button.  When I look at the 655, it appears that the 1522 is connected (bridged) at 2.4 GHz G like I would expect.  So, when I install the 825 how do I make it connect at 5GHz N or will that be automatic if my SSID on the N mode of the 825 matches SSID on the 1522?

View 1 Replies View Related

D-Link DAP-1522 :: Bridge Mode - Turn Off Wireless?

May 30, 2012

If I turn off the wireless on my DAP-1522 in bridge mode, will it basically become a Gig Switch??  I've changed my network around abit and don't need it in bridge mode at this point but would love to use it as a plain switch.  Would this do the trick??

View 3 Replies View Related

D-Link DAP-1522 :: Ethernet Ports Isolated In Bridge Mode

Jun 13, 2012

I have a DAP-1522 in my den that I am connecting as a bridge to a Netgear WNDR3800 that in turn is connected to a cable modem in my living room.  I have multiple PC's connected to the DAP-1522 via the Ethernet Ports.  All the Ethernet connected PC's are getting IP addresses from my Netgear WNDR3800 via DHCP and can access the Internet fine.  The weird thing is the PC's connected to the DAP-1522 through the Ethernet ports can't see each other - they are isolated from each other.  I can see the DAP-1522 hard wired PC's from a laptop connected wirelessly through the Netgear WNDR3800 but the PC's wired to the DAP-1522 can't see each or communicate to each other via IP, though they can communicate to anything else on the Netgear WNDR3800 wireless network or Internet.Only the PC's connected to the DAP-1522 via the Ethernet ports are isolated from each other.  Very strange.  This is a problem because I have a NAS device I want to connect to the DAP-1522 that will be shared by the PCs in my den.  I do software development and want access between the PC's and NAS device at Ethernet Gigabit speed. I am using default configurations for the DAP-1522.  It appears that firmware for the bridging function if funky.  I am on firmware version 1.41.  The hardware release is A1.Not sure if it is an issue with the DAP-1522 or the Netgear WNDR3800.

View 5 Replies View Related

D-Link DAP-1522 :: Make MAC Addresses From Bridge Will Be Recognized Separately

Nov 4, 2010

I purchased a wireless bridge D-Link DAP-1522 (IP fix 192.168.0.50) to share the Internet connection to two remote devices: WD TV Live HD (IP fix 192.168.0.52) and a Samsung BD P2500 player (IP fix 192.168.0.51: to try the BD-Live) but when I plug it into my network I have an IP conflict and I can not navigate anywhere, even by the computer which control the Netgear router (IP 192.168.0.1 DHCP range 192.168.0.2-192.168.0.49).

I tried with all fixed IP (192.168.0.xxx Subnet mask 255.255.255.0 Gateway 192.168.0.1 DNS 192.168.0.1), but nothing to do, I have the same problem: after a few minutes after plugged the network cable into BD player the network falls.With wired connection (10 m of patch cable!!!) Samsung BD P2500 have no problem (DHCP and IP fix).

Then look closely in the information relating to devices connected to the Netgear router I noticed that all devices connected through the bridge DAP-1522 have the different IP but same MAC address and I think this could be the cause of the problem that creates the Blu Ray when it's connected to the network through the bridge, because he is not identified with any name but only as UNKNOWN as the bridge (a problem that WD Live not seen: same MAC address but is identified by name as WDTVLIVE).

How can I make the MAC addresses from the bridge will be recognized separately from my router/modem Netgear?In the settings of the bridge I noticed that you can enable or disable MAC address cloning, but if the off I would expect that cloning was not done and instead all the devices are identified by the Netgear router with the MAC address of the access bridge.The DAP-1522 masked the MAC address of device that are plugged into bridge.The router has the latest available firm while the original bridge has version 1.20 (the penultimate version available).

View 2 Replies View Related

D-Link DAP-1522 :: Bridge With A Linksys E4200 5ghz Network?

Nov 16, 2011

I Recently purchased the DAP1522 to use as an entertainment bridge for my xbox 360, BR player and dish network receiver  I also upgraded my router a WRT5GS running tomato to a Linksys E4200 going from G to N while i had my Xbox and BR connected wireless I didn't have the Dish receiver hooked up so i thought by using the DAP i would be upgrading my network and connecting my Dish receiver no brainier right and everything works so far.But here's the question with all the hype of the benefits of the 5ghz channel , well it's not hype it certainly makes sense but from what I see the products have to be compatible shouldn't what I'm connecting be compatible they say your gaming console specifically and streaming movies i would think . Any configuration tips I read somewhere that with an E3200 router they had to set the 5ghz channel to like 37 for the DAP to see that channel its all getting a little overwhelming here's whats in the house A Mac Power PC pre Intel using a Asus NB13 USB 2.4ghz its the only thing i could find with speeds over 100Mbps A windows 7 machine hardwired gig connection another windows 7 pc downstairs hardwired a netbook with a wireless connection and lastly a DECT 6.0 phone system who knows what interference these produce.

View 1 Replies View Related

D-Link DIR-655 :: Extending Wireless Range Of Router - Installed DAP 1522 As Bridge?

Mar 30, 2011

We currently use the DIR 655 in our home. I has a great range, and we've never had any problems. Our house is a very tall Victorian, so some areas don't get as strong a signal as others. I'd like to set up a few addition devices to extend the coverage of our network.

I installed a DAP 1522 as a bridge to our entertainment PC. After a while of trying to sort out how to configure it everything is working there. The 1522 is connected to the PC via cable.

I still want to extend the overall wireless range to better cover the lower floors and back porch.

From reading the manual on the 1522 I am a bit confused. I understand how it works as a bridge, connecting devices via cable. Will it also extend the range is set as an Access Point without needing the devices to connect via cable?

View 10 Replies View Related

D-Link DAP-1522 :: A1 In Bridge Mode Intermittent Wireless Connection Drops?

Apr 21, 2013

I have a brand new DAP-1522 A1 connected to an 802.11n wireless LAN in bridge mode. Running in the 2.4GHz band with WPK-2 and AES security/encryption.Everything runs fine 99% of the time, but once a day or so the wireless LAN connection on the DAP-1522 drops and then takes about two minutes to re-connect.  It re-connects and then everything is fine for a day or so until the next dropped wireless connection episode on the DAP-1522.  I know my 802.11n wireless network is 100% fine as during the dropped connection to the DAP-1522 I can connect directly to the 802.11n wireless network (running from my gateway/router) using my other computer, no issues.I've seen some posts on this forum that the A1 version of the DAP-1522 hardware is not 100% compatible with the 802.11n network standard and there will be intermittent wireless drops.  If this is true, it's just insane.  All I can say is I can't believe DLink would allow a product to be sold that won't work properly on 802.11n networks.I check the logs each time I see the dropped wireless connection and all that shows is the following.1) Negotiating connection   2) 4-way handshake success [mac address]There's no message in the logs about why the wireless connection dropped, but I assume it has something to do with re-newing a key for the wireless network as the successful key renewal messages are the only other messages in the log.  When the wireless network dropped I don't see the successful key renewal message at the time I should see it.I thought this DAP-1522 would take 15 minutes to configure in bridge mode and then I'd forget about it.  Spend too much time on this already, so a bit disappointed with this DAP-1522 and DLink tech support....though when it's connected to the 802.11n wireless LAN it works fine.

View 14 Replies View Related

D-Link DAP-1522 :: Guest Zone For Wireless Printer

Mar 3, 2013

I am thinking of getting the DAP-1522 access point but I wondered. Can I set it to broadcast on 5GHz for my laptop and ipad, so they can stream video. Then set the guest zone to broadcast on 2.4GHz just for my lame printer, my printer does not have LAN and only wireless b & g. If I do put the printer on the guest zone and I enable routing between zones, will my laptop be able to print to my printer?

View 1 Replies View Related

Wireless Bridge From Cisco 1522 AP To Mikrotik SXT5HPND Router To 2960s Switch

Nov 20, 2012

We have a Cisco 1522 ap bridge running on a controller and we want to create a wireless bridge from the Cisco AP to a Mikrotik SXT5HPND wireless router to a cisco 2960s switch

How to bridge a cisco device with a mikrotik device, but there are plenty who do mikrotik to mikrotik bridging..

View 3 Replies View Related

Using A Network Bridge To Connect A HP LaserJet 5000 Printer?

Sep 29, 2011

I would like to print to my HP LaserJet 5000 through my WiFi. The printer however does not have WiFi only an RJ45 jack. I bought a TP-Link WR541G router to use as a bridge. My current router is a 2Wire which I get my WiFi from.I cannot physically connect the printer as the location of the 2-Wire to printer is across my home. I am hoping to simply connect the TP-Link to the printer and link the TP-Link to the 2-wire. How to make the bridge

View 5 Replies View Related

D-Link DAP-1522 Not Connecting

Mar 10, 2013

My D-Link DAP-1522 wireless bridge is connected through a single cat5 cable from the LAN port on my PC to the 1st LAN port on the D-link unit. At the moment, it is in bridge mode, with the blue power indicator on, the orange wireless connection light flashing, and the 1st LAN port connection periodically wavering indicating that it is communicating with my PC. When I attempt to configure the DAP-1522 via my internet browser, (IP 192.168.0.50) I get an error saying that the requested webpage does not exist.

View 6 Replies View Related

D-Link DAP-1522 - Unable To Log On After Network Changes

Sep 30, 2011

I recently had a networking guy set up a VPN for me, but for it to work properly he had to change all my IP addresses to 192.168.10.xx from 192.168.0.xx. My DAP-1522 (in bridge mode) continued to work but I am unable to log on to it, I think because it's address is 192.168.0.0. I have run into some other issues which makes me think I may need to upgrade the DAP-1522 firmware and/or assign it an address beginning with 192.168.10.xx, however I can't log on to the bridge. (Nor do I know how to change or possible reassign the DAP-1522's address through my router, a DIR-615).

View 5 Replies View Related

D-Link DAP-1522 :: Not Connecting To DIR-815 Properly?

Apr 26, 2011

My problem is two-fold:

1. the DAP-1522 will not connect to the 5GHz network of the DIR-815. Although, this doesn't surprise me as none of my 5GHz-capable devices see it, other than intermittently and at low signal. It is most likely an issue with the 815's 5GHz radio/network.

2. OTOH, the 1522 does appear to connect to the 815's 2.4GHz network just fine. However, there is no Internet access for any of the devices connected to the 1522's ports.

I know the 1522 can work correctly on 2.4GHz, as it previously did fine with my prior 2Wire router from AT&T. (I've just switched to Comcast, using the DIR-815 connected to their SMC modem.)

Also, I know the router and modem work fine (at least with 2.4GHz), as all of my wireless devices connect easily and with screaming bandwidth to the router and Internet.

View 4 Replies View Related

D-Link DAP-1522 :: Can't Update Firmware To 1.31

Dec 7, 2011

I have dap-1522 version A Browser IE8 with lestest updates.

I downloaded the DAP1522_FW_1.31zip went I try to upload via the 1522 admin error not correct file.

I try three different way to download it, could the file be bad on dlinks web site?

View 4 Replies View Related

D-Link DAP-1522 :: Incompatible With Almost All New Pioneer AVR's?

Aug 27, 2010

I have just discovered after three weeks of testing that DAP-1522 wireless bridges are not compatible with all the new Pioneer AVR's that support internet radio and Iphone control.  Anytime a DAP-1522 is powered on and on the same subnet mask as a Pioneer receiver it will cause the Pioneer to loose it's connection every 30 minutes.  The receiver is then not able to connect unless it is powered off and on again. The DAP-1522 will cause this even if the Pioneer is hardwired to a router and nothing is plugged into the DAP-1522.  This affects all new models of Pioneer receivers including the Elite line like I have.

I have tested this with 3 differnet Pioneer receivers and 2 DAP-1522's and always got the same results no matter what the settings were and with the 1522 in AP or bridge mode.  Other Pioneer receiver owners experiencing constant disconnect problems on another forum have now also confirmed they have DAP-1522's.....and they are also pissed after spending countless hours troubleshooting.

I talked to Dlink support today and they will not admit to a problem so I can't wait to contact Pioneer tech support on Monday to let them know I have found the reason they are seeing returns on their new receivers (some cost as much as $7K) since many of the new owners like myself are exchanging them thinking they got a bad one.  I'm sure Pioneer will test this immediately and force a Dlink fix or turn it over to the FCC.At this point I just wish I could get my money back since I have also already confirmed that a netgear bridge works just fine.  Come to think of it, I know Dlink has a new refund policy, but I will check with my state district attorney to see if they can legally keep my money even if the product doesn't work. I don't see anything on the outside of the box with this policy so therfore I wasn't given fair warning of the policy before purchase and would not be expected to know it since it is not industry standard.  Let the games begin.

View 14 Replies View Related

D-Link DAP-1522 :: Won't Accept New Firmware

Mar 14, 2012

I just purchased a DAP-1522. The sticker on the bottom says it's a version B1, with firmware 2.0.In the web interface, it says: "Firmware Version :   1.21 , Fri 26 Jun 2009"I downloaded the 2.01 firmware from the D-Link site and when I try to upload it, it says it's not an image file.

View 11 Replies View Related

D-Link DAP-1522 :: How To Get Ip From Dwl 2100Ap Not By Livebox

Jan 20, 2011

I have bought 1 Dlink Dwl 2100 Access Point about 1 week, it working with ( Default Gateaway 192.168.1.1) but I want connect with 2100Ap But I get Ip from my Livebox Orange.Can I get Ip From 2100Ap (Default Gateway 192.168.0.50), not by LiveBox Orange (Default Gateway 192.168.1.1).My brother live upstair (with LiveBox) I  Live ground Floor and connect to Cable Utp cat5 form upstair to ground Floor. In my room I have a Switch connect to 2100Ap.

LiveBox Orange Default gateway is 192.168.1.1
Dlink dwL 2100Ap Default Gateway is 192.168.0.50
My os is windows Xp sp2

View 2 Replies View Related

D-Link DAP-1522 :: No Internet Access With It

Nov 29, 2010

I have a DIR-655 router with a DAP-1522 connected in bridge mode.  The firmware on the router is 1.21 and the firmware on the bridge is 1.21.  I have my SSID set to broadcast on the DIR-655 with WPA-Personal encryption.  When I initially setup the DAP-1522, I was able to access the setup page and connect to the DIR-655.  On the status page of the DAP-1522, wireless radio is enabled and status is connected.  I connected my XBOX 360, Sony BR player and DirecTV DVR to the wireless bridge and none of them can connect to the internet.

I can wirelessly access the bridge's IP, 192.168.0.50, from any computer connected to the DIR-655 but when I attempt to access the internet on any device connected to the DAP-1522, I do not get a connection.  On the XBOX 360 I cannot connect my live account.  On the Sony BR player, I get a message that new firmware was found, but when it attempts to connect to the internet to download it, the connection times out.  Same occurs when attempting to access the internet on the DirecTV DVR receiver.

View 14 Replies View Related

D-Link DAP-1522 :: Unable To Access It

May 25, 2012

More that a year ago, with guidance from D-Link Customer Service, I performed setup on a system consisting of a DSL-2640B (with wireless disabled) and a DAP-1522 as an access point. I included the 1522 so as to have an N network, since the 2640 is G. The system works fine and I'm able to stream via the 1522 to an N 300 USB Adapter. Internet access is fine, and I'm able to access the 2640 with no problem.I want to add another 300 in a different location. To do that, I'll need to access the 1522 from my Windows 7 computer, since I've lost the passphrase that I'll need for the 300.Everything that I've read tells me to connect the 1522 directly to my computer via cable and to temporarily change the network adapter settinge to:

IP = 192.168.0.x         various sources list values of 2 and 99 for x
Subnet mask = 255.255.255.0
Gateway = 192.168.0.50

Then to use a browser window to go to 192.168.0.50 Regardless of the settings that I use, the browser (IE9) always indicates that it can't connect with that address. accessing the 1522, or on any alternative way to obtain the passphrase.

View 3 Replies View Related

D-Link DAP-1522 :: DIR 655 Quit Working

Feb 14, 2012

My DIR 655 router quit working and so I called D link.  She had me reset the ip to 192.168.5.x.  So now my dap1522 is not connecting to the 655.  I connected the dap1522 to my laptop via ether-net and typed in dink, and got nothing, then put in default ip for the 1522 and still nothing. I also tried ip scanner and it would not come up.

View 1 Replies View Related

D-Link DAP-1522 :: Administration Web Of Switch Is Not Available

Jan 10, 2012

my config : one DAP-1522 as an AP + one DAP-1522 as a switch, 6 meters between them, signal strength about 70. Any others wifi networks around my house. both with FW140b03.bin dated 01/14/2011.Most of the time, both work correctly. But time to time, the wifi link is ko. In AP status, the switch is mentionned connected (uptime = 3 hours ...). The red led is blinking on the switch. The administration web of the switch is not available and the link is ko. Unplug and plug power units doesn't fix the problem. I need to reset DAPs.From Dlink experts, i would like to get more description about issues :

- in switch mode, which are the events modifying the red led state ? what does blinking / off led mean ?

- in AP mode, what does "uptime ...STA ...." mean ? frames are periodically received from STA ?

View 7 Replies View Related

D-Link DAP-1522 :: Comparability With 3D Material?

Aug 8, 2011

Will the dap-1522 work with 3d video ie; from a 3d Blue Ray Player? I am upgrading system to an LED Samsung 3D TV and Samsung 3d Blue Ray Player. I know that HDMI 1.4 cables will work but am looking at the wireless option.

View 1 Replies View Related

D-Link DAP-1522 :: Unable To Login With Default IP?

Jan 5, 2012

 changed the router wan access pwd and now trying to test the dap i can't seem to log in with the default ip / dlinkap url access i have tried the bridge and ap switch setting on the dap with no luck after resetting the dap a couple of times with no luck ..

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved