D-Link DAP-1522 :: DIR 655 Quit Working

Feb 14, 2012

My DIR 655 router quit working and so I called D link.  She had me reset the ip to 192.168.5.x.  So now my dap1522 is not connecting to the 655.  I connected the dap1522 to my laptop via ether-net and typed in dink, and got nothing, then put in default ip for the 1522 and still nothing. I also tried ip scanner and it would not come up.

View 1 Replies


ADVERTISEMENT

D-Link DIR-601 :: Other Router Quit Working With DCM-202

Aug 1, 2011

Setup that was working. DCM-202 to  AT&T Micro Cell to DIR-601 wi-fi.Now I can direct connect MacBookPro to DCM-202 and get internet. If I connect to DIR-601, either via ethernet or wi-fi, no internet. If I try another router, Apple Time Capsule, I get same result. If I just do an ethernet pass thru using the AT&T Micro Cell, still no internet. Basically, the DCM-202 will direct connect via ethernet to my laptop, but not pass thru an ethernet connection for any other devices.

View 1 Replies View Related

D-Link DIR-655 :: Router Randomly Quit Working?

Jul 20, 2011

My DIR-655 wireless router randomly quit working. It was plugged into my modem and working great, then it just stopped. I restarted my modem and router, but the "Ethernet" light on my modem does NOT shine when plugged into the router.

I'm sure that the modem is fine, as I have it connected to my PC right now. I also tried it with my friend's wireless router - works fine.

I believe this may be hardware-related. I have tried restoring the router to factory settings and then setting up everything again: No luck.

I haven't had this router for long! Just a little over two years I believe (or it may be just a little over one). I have another wireless router somewhere that's 6-7 years old and still works. If it is hardware related (as in the router just randomly broke), then rest assured I will not be purchasing another D-Link router in the future.

View 1 Replies View Related

D-Link DAP-1522 :: WPA Not Working With Android Device?

Dec 4, 2011

I am unable to connect and Android device (HTC Desire, Samsung Nexus S etc) wirelessly to the DAP-1522. I've search through the forums and can't find anyone else having issues with Android so I think it must be one of my settings. It works fine if I switch to WEP however I don't want to use the weaker hackable protocol. Any way to have the DAP-1522 in WPA working with an android device?

View 4 Replies View Related

Ethernet Port Quit Working After Restart?

Nov 22, 2011

I recently installed Arkham City on my computer played it for a while, tried google chrome, gave me a corrupt profile error or something (internet still worked and was connected at the time) restarted my computer and now it's telling me there isn't an ethernet cable connected to my computer.

Here's what I tried so far:

-Uninstalling and reinstalling the driver

-Updating the driver

-Using the network troubleshooting for windows 7

-Doing a system restore before I installed the game (gave me an error saying could not complete restore)

-Currently scanning my computer in safe mode with networking (seeing if that might work, doesn't) with malewarebytes

-Unplugged and replugged the router and modem

-Checked the router on another computer to see if there's a connection (there is none)

-Checked the router to see if there is a light in the port connected to the ethernet, it's blinking at a very slow a steady pace, unlike the ones around it which are solid green lights

-Tried the ethernet cable on another computer, works fine.

computer specs:

Windows 7 64-bit home premium edition
Gigabyte GA-MA790X-UD4P
NETGEAR router WNDR3700

View 2 Replies View Related

Tried To Add New PC To Mixed Network Printer Quit Working

Jan 29, 2013

We have a non-wireless network of Macs at work and occasionally have a PC laptop connected with an ethernet cable. Everything worked well until the owner of the PC got a new one, and tried to install drivers for our HP printer using the original HP install disk. Now none of the computers can connect with the printer. What happened? How can I correct this? The Macs all run OSX 10.5.8. The Windows operating system is, I believe, XP.

View 3 Replies View Related

Wireless Connection Quit Working After Windows Update?

Aug 19, 2012

My wife's computer was working fine. Two nights ago, a Windows update was automatically installed. Now, it will not connect to the internet. The map shows it connected to the network. We have several other devices on our network both wired and wireless and all of them are working fine.

I was able to use system restore yesterday to roll back the update. It still did not work. However, I tried connecting to a neighbor's wireless. It said something about refreshing the adapter and then it connected to our network and was working fine. Unfortunately, when she shut down last night, the windows update was reapplied. I turned off automatic updates and tried using system restore. It did not work this time. I removed every update that was applied in the last 48 hours but I still cannot get the computer to connect to the internet. However, it does connect to the internet when I bring it up in Safe Mode.

View 8 Replies View Related

Linksys Wireless Router :: WRT54g Seems To Have Quit Working?

Feb 7, 2012

I have tried everything I know.  My router is about 4 years old, so it may be time for a new one, but it has been working great, then it just stopped.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Quit Working After 5 Months

Jul 24, 2011

I have been using the E4200 router with few issues for the past 5 months. I have the latest firmware installed and have 1 pc running Windows 7, a sling box device and USB storage drive connected in the rear and 7 wireless devices.
 
 Over the past week, others in my household have been complaining of not being able to connect wireless. The other day, the connection quit for both wireless and wired connections. I thought it had something to do with my ISP (Comcast), and after I made a direct connect from my modem to my PC, the problem is the E4200. After unsuccessfully troubleshooting, I unplugged the router for a few hours.
 
Trying a few hours later, I was able to reconnect all connections. However, that lasted for a day and has not been able to connect. I did a reset and when going through the setup process, it says that it cannot connect to the internet. The only time I have any lights or activity on the internet port is when the router is booting up and then it goes off. The rest of the ports are working properly. Likewise, the link light on my modem shows no activity when connected to the E4200. The only connection I can make is to the browser utility.
 
I am now using another wireless router until I can get this resolved.

View 3 Replies View Related

Linksys Wireless Router :: WRT120N Just Quit Working And Frozen

Jul 8, 2012

I have had this wireless router a year or two and it had been working fine until late last night when it just quit.  It will not connect to any wireless devices in the house.  When my main PC is connected to the router, I cannot get on the internet at all.  If I plug my PC directly into my DSL modem the internet works fine.  I tried the reset button on the router and still nothing.  When the router is connected I get this message:"Limited or no connectivity.  You might not be able to access the internet or some network resources.  This problem occured because the network did not assign a network address to the computer"It's very hard to troubleshoot the problem on the internet because if I have to connect the router to try something then I lose my internet connection.I hate when things quit working spontaneously.  Absolutely nothing changed when this issue started.  One minute it was working fine and the next it wasn't.

View 1 Replies View Related

Routers / Switches :: Netgear 3300 Dual Band Router 5G Mode Quit Working?

Nov 27, 2011

I have had the Netgear 3300 Dual Band for three years. Everytime I wanted to access using my laptop, I had to choose between 2.4G and 5G connection. For about a month now, the 5G does not show up. It doesn't show up as a network to select no matter what device I use. I have reset the router and updated the firmware. Both connection lights are blinking. I recently purchased and IPhone 4 and still I do not have the option of selecting 5G.

View 4 Replies View Related

Linksys WRT110 Wireless Router Hooked Up To Zoom Modem - Phone Lines Quit Working

May 4, 2011

I hooked up with a Linksys WRT110 wireless router to a Zoom modem and my DSL on my desktop and laptop are both working fine. My problem is my phone lines quit working. I plugged a phone into the box outside and I had a dial tone. When you try to call my house it just keeps ringing.

View 1 Replies View Related

Cisco Wireless :: 1522 MAP Through 1042 RAP Not Working?

Mar 25, 2012

I'm trying to mesh a 1522 MAP through a 1042 RAP but this doen´t work. I get strange messages on the trap log:
 
1 Mon Mar 26 18:40:19 2012 Mesh child node 'f0:25:72:d9:69:6f' has changed its parent to mesh node '58:35:d9:c6:60:10' from mesh node '58:35:d9:c6:60:1f'. .. .
3 Mon Mar 26 18:37:13 2012 Mesh child node 'f0:25:72:d9:69:6f' has changed its parent to mesh node '58:35:d9:c6:60:10' from mesh node '58:35:d9:c6:60:10'. 4 Mon Mar 26 18:34:00 2012 Mesh node 'f0:25:72:d9:69:6f' has changed its parent 5 times in last one hour.
5 Mon Mar 26 18:34:00 2012 Mesh child node 'f0:25:72:d9:69:6f' has changed its parent to mesh node '58:35:d9:c6:60:10' from mesh node '58:35:d9:c6:60:1f'. 6 Mon Mar 26 18:33:44 2012 Mesh child node 'f0:25:72:d9:69:6f' is no longer associated with mesh node '58:35:d9:c6:60:10'.

[code]....

If i debug the 1042 i also see "... has 1 AES-CCMP TSC replays messages..."I have some 1522 MAP meshing through 1142 working fine on same 5508 controller version, i think there are few differences between 1042 an 1142.

View 1 Replies View Related

D-Link DAP-1522 Not Connecting

Mar 10, 2013

My D-Link DAP-1522 wireless bridge is connected through a single cat5 cable from the LAN port on my PC to the 1st LAN port on the D-link unit. At the moment, it is in bridge mode, with the blue power indicator on, the orange wireless connection light flashing, and the 1st LAN port connection periodically wavering indicating that it is communicating with my PC. When I attempt to configure the DAP-1522 via my internet browser, (IP 192.168.0.50) I get an error saying that the requested webpage does not exist.

View 6 Replies View Related

D-Link DAP-1522 - Unable To Log On After Network Changes

Sep 30, 2011

I recently had a networking guy set up a VPN for me, but for it to work properly he had to change all my IP addresses to 192.168.10.xx from 192.168.0.xx. My DAP-1522 (in bridge mode) continued to work but I am unable to log on to it, I think because it's address is 192.168.0.0. I have run into some other issues which makes me think I may need to upgrade the DAP-1522 firmware and/or assign it an address beginning with 192.168.10.xx, however I can't log on to the bridge. (Nor do I know how to change or possible reassign the DAP-1522's address through my router, a DIR-615).

View 5 Replies View Related

D-Link DAP-1522 :: Not Connecting To DIR-815 Properly?

Apr 26, 2011

My problem is two-fold:

1. the DAP-1522 will not connect to the 5GHz network of the DIR-815. Although, this doesn't surprise me as none of my 5GHz-capable devices see it, other than intermittently and at low signal. It is most likely an issue with the 815's 5GHz radio/network.

2. OTOH, the 1522 does appear to connect to the 815's 2.4GHz network just fine. However, there is no Internet access for any of the devices connected to the 1522's ports.

I know the 1522 can work correctly on 2.4GHz, as it previously did fine with my prior 2Wire router from AT&T. (I've just switched to Comcast, using the DIR-815 connected to their SMC modem.)

Also, I know the router and modem work fine (at least with 2.4GHz), as all of my wireless devices connect easily and with screaming bandwidth to the router and Internet.

View 4 Replies View Related

D-Link DAP-1522 :: Can't Bridge PC Or Printer

Mar 12, 2012

I have a WIN XP desktop which I successfully connected to the 1522 AP - as evidence of the GUI to program it.  I have the 1522 set to Bridge Mode via the switch on the unit.  The 1522 has hardware version B1 and Firmware version 2.000.  I joined my wireless network successfully as evidence of the Status page showing it's successfully connected and bridged to my network.  I then disabled my USB wifi NIC in hopes of using my hardwired connection to the 1522 to get on the internet.

Wireless Radio : Enabled
Bridge State : Connected
MAC Address : fc:75:xxxxxx
802.11 Mode : Mixed 802.11a, 802.11g and 802.11n
Band Width : 40
Channel : 6
Network Name
(SSID) : cleveland
Wi-Fi Protected Setup : Enabled
Security : WPA2-PSK

View 3 Replies View Related

D-Link DAP-1522 :: Can't Update Firmware To 1.31

Dec 7, 2011

I have dap-1522 version A Browser IE8 with lestest updates.

I downloaded the DAP1522_FW_1.31zip went I try to upload via the 1522 admin error not correct file.

I try three different way to download it, could the file be bad on dlinks web site?

View 4 Replies View Related

D-Link DAP-1522 :: Incompatible With Almost All New Pioneer AVR's?

Aug 27, 2010

I have just discovered after three weeks of testing that DAP-1522 wireless bridges are not compatible with all the new Pioneer AVR's that support internet radio and Iphone control.  Anytime a DAP-1522 is powered on and on the same subnet mask as a Pioneer receiver it will cause the Pioneer to loose it's connection every 30 minutes.  The receiver is then not able to connect unless it is powered off and on again. The DAP-1522 will cause this even if the Pioneer is hardwired to a router and nothing is plugged into the DAP-1522.  This affects all new models of Pioneer receivers including the Elite line like I have.

I have tested this with 3 differnet Pioneer receivers and 2 DAP-1522's and always got the same results no matter what the settings were and with the 1522 in AP or bridge mode.  Other Pioneer receiver owners experiencing constant disconnect problems on another forum have now also confirmed they have DAP-1522's.....and they are also pissed after spending countless hours troubleshooting.

I talked to Dlink support today and they will not admit to a problem so I can't wait to contact Pioneer tech support on Monday to let them know I have found the reason they are seeing returns on their new receivers (some cost as much as $7K) since many of the new owners like myself are exchanging them thinking they got a bad one.  I'm sure Pioneer will test this immediately and force a Dlink fix or turn it over to the FCC.At this point I just wish I could get my money back since I have also already confirmed that a netgear bridge works just fine.  Come to think of it, I know Dlink has a new refund policy, but I will check with my state district attorney to see if they can legally keep my money even if the product doesn't work. I don't see anything on the outside of the box with this policy so therfore I wasn't given fair warning of the policy before purchase and would not be expected to know it since it is not industry standard.  Let the games begin.

View 14 Replies View Related

D-Link DAP-1522 :: Won't Accept New Firmware

Mar 14, 2012

I just purchased a DAP-1522. The sticker on the bottom says it's a version B1, with firmware 2.0.In the web interface, it says: "Firmware Version :   1.21 , Fri 26 Jun 2009"I downloaded the 2.01 firmware from the D-Link site and when I try to upload it, it says it's not an image file.

View 11 Replies View Related

D-Link DAP-1522 :: How To Get Ip From Dwl 2100Ap Not By Livebox

Jan 20, 2011

I have bought 1 Dlink Dwl 2100 Access Point about 1 week, it working with ( Default Gateaway 192.168.1.1) but I want connect with 2100Ap But I get Ip from my Livebox Orange.Can I get Ip From 2100Ap (Default Gateway 192.168.0.50), not by LiveBox Orange (Default Gateway 192.168.1.1).My brother live upstair (with LiveBox) I  Live ground Floor and connect to Cable Utp cat5 form upstair to ground Floor. In my room I have a Switch connect to 2100Ap.

LiveBox Orange Default gateway is 192.168.1.1
Dlink dwL 2100Ap Default Gateway is 192.168.0.50
My os is windows Xp sp2

View 2 Replies View Related

D-Link DAP-1522 :: No Internet Access With It

Nov 29, 2010

I have a DIR-655 router with a DAP-1522 connected in bridge mode.  The firmware on the router is 1.21 and the firmware on the bridge is 1.21.  I have my SSID set to broadcast on the DIR-655 with WPA-Personal encryption.  When I initially setup the DAP-1522, I was able to access the setup page and connect to the DIR-655.  On the status page of the DAP-1522, wireless radio is enabled and status is connected.  I connected my XBOX 360, Sony BR player and DirecTV DVR to the wireless bridge and none of them can connect to the internet.

I can wirelessly access the bridge's IP, 192.168.0.50, from any computer connected to the DIR-655 but when I attempt to access the internet on any device connected to the DAP-1522, I do not get a connection.  On the XBOX 360 I cannot connect my live account.  On the Sony BR player, I get a message that new firmware was found, but when it attempts to connect to the internet to download it, the connection times out.  Same occurs when attempting to access the internet on the DirecTV DVR receiver.

View 14 Replies View Related

D-Link DAP-1522 :: Unable To Access It

May 25, 2012

More that a year ago, with guidance from D-Link Customer Service, I performed setup on a system consisting of a DSL-2640B (with wireless disabled) and a DAP-1522 as an access point. I included the 1522 so as to have an N network, since the 2640 is G. The system works fine and I'm able to stream via the 1522 to an N 300 USB Adapter. Internet access is fine, and I'm able to access the 2640 with no problem.I want to add another 300 in a different location. To do that, I'll need to access the 1522 from my Windows 7 computer, since I've lost the passphrase that I'll need for the 300.Everything that I've read tells me to connect the 1522 directly to my computer via cable and to temporarily change the network adapter settinge to:

IP = 192.168.0.x         various sources list values of 2 and 99 for x
Subnet mask = 255.255.255.0
Gateway = 192.168.0.50

Then to use a browser window to go to 192.168.0.50 Regardless of the settings that I use, the browser (IE9) always indicates that it can't connect with that address. accessing the 1522, or on any alternative way to obtain the passphrase.

View 3 Replies View Related

D-Link DAP-1522 :: Administration Web Of Switch Is Not Available

Jan 10, 2012

my config : one DAP-1522 as an AP + one DAP-1522 as a switch, 6 meters between them, signal strength about 70. Any others wifi networks around my house. both with FW140b03.bin dated 01/14/2011.Most of the time, both work correctly. But time to time, the wifi link is ko. In AP status, the switch is mentionned connected (uptime = 3 hours ...). The red led is blinking on the switch. The administration web of the switch is not available and the link is ko. Unplug and plug power units doesn't fix the problem. I need to reset DAPs.From Dlink experts, i would like to get more description about issues :

- in switch mode, which are the events modifying the red led state ? what does blinking / off led mean ?

- in AP mode, what does "uptime ...STA ...." mean ? frames are periodically received from STA ?

View 7 Replies View Related

D-Link DAP-1522 :: Comparability With 3D Material?

Aug 8, 2011

Will the dap-1522 work with 3d video ie; from a 3d Blue Ray Player? I am upgrading system to an LED Samsung 3D TV and Samsung 3d Blue Ray Player. I know that HDMI 1.4 cables will work but am looking at the wireless option.

View 1 Replies View Related

D-Link DAP-1522 :: Unable To Login With Default IP?

Jan 5, 2012

 changed the router wan access pwd and now trying to test the dap i can't seem to log in with the default ip / dlinkap url access i have tried the bridge and ap switch setting on the dap with no luck after resetting the dap a couple of times with no luck ..

View 8 Replies View Related

D-Link DAP-1522 :: How To Enable 5Ghz Band

Oct 13, 2011

I installed my 1522 today with a Direct TV receiver and made a connection using AP mode.

How do I know what band is being used and how to switch between the bads.

View 1 Replies View Related

D-Link DAP-1522 :: DNS Server Not Shown In Static IP

Mar 16, 2012

Under Advanced>DHCP Server, when I put in the Default DNS server of 192.168.0.1 and click save, it goes away. Meaning it doesn't show up anymore.

View 4 Replies View Related

D-Link DAP-1522 :: Do Devices Talk Directly

Apr 14, 2013

Do the devices connected to the DAP-1522 communicate directly with each other or do they communicate through the router.My DAP-1522 is set up as a bridge connected to my DIR-825.  The reason I ask is I've set up an HTPC connected to the DAP-1522 and I also have media devices connected to the DAP and am wondering if they'll communicate with each other directly or if they have do it by going to the router and back.  That way I can use my HTPC to serve media to my devices at local speeds.

View 1 Replies View Related

D-Link DAP-1522 :: Simultaneous Bridge And AP Function

Oct 26, 2011

I already have a DIR-855 and was considering using a DAP-1522 in conjunction to bridge my 5GHz N to my living room to feed HD media to my PVR box and also feed wired-only clients like my TV and BR player. But, in my new flat I find that the walls are pretty thick and my wifi signal is dropping off pretty quick, so  I was wondering if you can configure the DAP-1522 to simultaneously be a wifi bridge to feed my media clients, and an AP to feed any laptops that might be in use in the living room?

View 1 Replies View Related

D-Link DAP-1522 :: Can't Log In To Change Network Password

Dec 29, 2011

Had to reset out DIR-655 router. This ended up changing our network password. Unfortunately, my DAP-1522 was not informed of this change and it will not connect to my Directv receiver now. I attempted to log into the bridge to change the password and it will not let me in. I attempted to reset the DAP in hopes that I would just be able to start over from scratch, but no dice (Assuming that I did it correctly)

View 4 Replies View Related

D-Link DAP-1522 :: Bridge Mode In Next House

Apr 13, 2011

I m setup for my brother's next house. He wants to use to share with my internet access. I do have 2wire modem provider that has wireless capability in my house. So he have DAP-1522 [bridge mode] and adjust in Wireless Setting, to use SSID manual, (Bell9**) WPA. It s successful, and works well. Problem is cannot use wired to computers, blu-ray, Xbox 360 in same time. it will disconnect frequently because in bridge mode doesn't have DHCP reserved?

My bro bought other one is DIR-655.  DAP-1522 keep in [bridge mode] to link to DIR-655 (Static IP), and setup DHCP Reserved.  He feel relief that works very well and have no problem with any computers and devices doesn't disconnect anymore. my question is why DAP-1522 doesn't have DHCP reserved when bridge mode that connected to any providers modem?

View 1 Replies View Related

D-Link DAP-1522 :: AP MODE Doesn't Work?

Jan 6, 2011

I have a DSL router Pirelli PDF A1000G.I have a Linksys e3000 and I have a dap-1522.When I bought a dap-1522 I thought it could do access point in fact i saw many videos in dlinktv before choosing an access point from DIY with mike etc to youtube there are 2 videos one showing bridged mode and another ap mode!Now what happens is this I have upgraded from firmware 1.11 that came as default to 1.21 i connect it wired to my linksys e3000 when it is connected with the ethernet cable wired I can connect to the internet and navigate and open sites and my ps3 can connect to it but my range is not very good only 40%!

Now I bring it downstairs remove the ethernet cable and connect it to the power and then you can connect to it but since it isn't connected to my router which is upstairs i can't access websites neither can I play on my ps3!I don't know does only ap mode works when it is connected to the router wired because what happens is if you don't put ethernet cables in the back of the dap-1522 and just connect it to power then here doewnstairs you can connect to the dap-1522 my signal is like 87% but while I'm connected with my laptop I can't access websites and in the ps3 I can't connect!

and choose  access points there are (4) listed: dap-1522, dap-1160, dap-1353 and dap-2553, I thought of buying dap-1522 because it could support abgn while 1160 only supports g and 1353 only supports n to repeat to signal here downstairs and be a good access point!

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved