D-Link DIR-655 :: Router Randomly Quit Working?
Jul 20, 2011
My DIR-655 wireless router randomly quit working. It was plugged into my modem and working great, then it just stopped. I restarted my modem and router, but the "Ethernet" light on my modem does NOT shine when plugged into the router.
I'm sure that the modem is fine, as I have it connected to my PC right now. I also tried it with my friend's wireless router - works fine.
I believe this may be hardware-related. I have tried restoring the router to factory settings and then setting up everything again: No luck.
I haven't had this router for long! Just a little over two years I believe (or it may be just a little over one). I have another wireless router somewhere that's 6-7 years old and still works. If it is hardware related (as in the router just randomly broke), then rest assured I will not be purchasing another D-Link router in the future.
View 1 Replies
ADVERTISEMENT
Aug 1, 2011
Setup that was working. DCM-202 to AT&T Micro Cell to DIR-601 wi-fi.Now I can direct connect MacBookPro to DCM-202 and get internet. If I connect to DIR-601, either via ethernet or wi-fi, no internet. If I try another router, Apple Time Capsule, I get same result. If I just do an ethernet pass thru using the AT&T Micro Cell, still no internet. Basically, the DCM-202 will direct connect via ethernet to my laptop, but not pass thru an ethernet connection for any other devices.
View 1 Replies
View Related
Feb 14, 2012
My DIR 655 router quit working and so I called D link. She had me reset the ip to 192.168.5.x. So now my dap1522 is not connecting to the 655. I connected the dap1522 to my laptop via ether-net and typed in dink, and got nothing, then put in default ip for the 1522 and still nothing. I also tried ip scanner and it would not come up.
View 1 Replies
View Related
Apr 10, 2011
last night my internet stopped working. I have a Linksys USB Wireless Adapater.Model WUSB600N Ver. 2 I have unplugged and replugged it in numerous times. I have disabled TC IPV6. I have attempted to enter Ipconfig /renew and it said the following
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersXDazX>ipconfig /renew
Windows IP Configuration
[code]....
View 6 Replies
View Related
Feb 7, 2012
I have tried everything I know. My router is about 4 years old, so it may be time for a new one, but it has been working great, then it just stopped.
View 2 Replies
View Related
Jul 24, 2011
I have been using the E4200 router with few issues for the past 5 months. I have the latest firmware installed and have 1 pc running Windows 7, a sling box device and USB storage drive connected in the rear and 7 wireless devices.
Over the past week, others in my household have been complaining of not being able to connect wireless. The other day, the connection quit for both wireless and wired connections. I thought it had something to do with my ISP (Comcast), and after I made a direct connect from my modem to my PC, the problem is the E4200. After unsuccessfully troubleshooting, I unplugged the router for a few hours.
Trying a few hours later, I was able to reconnect all connections. However, that lasted for a day and has not been able to connect. I did a reset and when going through the setup process, it says that it cannot connect to the internet. The only time I have any lights or activity on the internet port is when the router is booting up and then it goes off. The rest of the ports are working properly. Likewise, the link light on my modem shows no activity when connected to the E4200. The only connection I can make is to the browser utility.
I am now using another wireless router until I can get this resolved.
View 3 Replies
View Related
Jul 8, 2012
I have had this wireless router a year or two and it had been working fine until late last night when it just quit. It will not connect to any wireless devices in the house. When my main PC is connected to the router, I cannot get on the internet at all. If I plug my PC directly into my DSL modem the internet works fine. I tried the reset button on the router and still nothing. When the router is connected I get this message:"Limited or no connectivity. You might not be able to access the internet or some network resources. This problem occured because the network did not assign a network address to the computer"It's very hard to troubleshoot the problem on the internet because if I have to connect the router to try something then I lose my internet connection.I hate when things quit working spontaneously. Absolutely nothing changed when this issue started. One minute it was working fine and the next it wasn't.
View 1 Replies
View Related
Nov 27, 2011
I have had the Netgear 3300 Dual Band for three years. Everytime I wanted to access using my laptop, I had to choose between 2.4G and 5G connection. For about a month now, the 5G does not show up. It doesn't show up as a network to select no matter what device I use. I have reset the router and updated the firmware. Both connection lights are blinking. I recently purchased and IPhone 4 and still I do not have the option of selecting 5G.
View 4 Replies
View Related
May 4, 2011
I hooked up with a Linksys WRT110 wireless router to a Zoom modem and my DSL on my desktop and laptop are both working fine. My problem is my phone lines quit working. I plugged a phone into the box outside and I had a dial tone. When you try to call my house it just keeps ringing.
View 1 Replies
View Related
Nov 22, 2011
I recently installed Arkham City on my computer played it for a while, tried google chrome, gave me a corrupt profile error or something (internet still worked and was connected at the time) restarted my computer and now it's telling me there isn't an ethernet cable connected to my computer.
Here's what I tried so far:
-Uninstalling and reinstalling the driver
-Updating the driver
-Using the network troubleshooting for windows 7
-Doing a system restore before I installed the game (gave me an error saying could not complete restore)
-Currently scanning my computer in safe mode with networking (seeing if that might work, doesn't) with malewarebytes
-Unplugged and replugged the router and modem
-Checked the router on another computer to see if there's a connection (there is none)
-Checked the router to see if there is a light in the port connected to the ethernet, it's blinking at a very slow a steady pace, unlike the ones around it which are solid green lights
-Tried the ethernet cable on another computer, works fine.
computer specs:
Windows 7 64-bit home premium edition
Gigabyte GA-MA790X-UD4P
NETGEAR router WNDR3700
View 2 Replies
View Related
Jan 29, 2013
We have a non-wireless network of Macs at work and occasionally have a PC laptop connected with an ethernet cable. Everything worked well until the owner of the PC got a new one, and tried to install drivers for our HP printer using the original HP install disk. Now none of the computers can connect with the printer. What happened? How can I correct this? The Macs all run OSX 10.5.8. The Windows operating system is, I believe, XP.
View 3 Replies
View Related
Aug 19, 2012
My wife's computer was working fine. Two nights ago, a Windows update was automatically installed. Now, it will not connect to the internet. The map shows it connected to the network. We have several other devices on our network both wired and wireless and all of them are working fine.
I was able to use system restore yesterday to roll back the update. It still did not work. However, I tried connecting to a neighbor's wireless. It said something about refreshing the adapter and then it connected to our network and was working fine. Unfortunately, when she shut down last night, the windows update was reapplied. I turned off automatic updates and tried using system restore. It did not work this time. I removed every update that was applied in the last 48 hours but I still cannot get the computer to connect to the internet. However, it does connect to the internet when I bring it up in Safe Mode.
View 8 Replies
View Related
Sep 10, 2012
The other day I went to a friends house, came back home, booted up my PC, and my wireless network adapter wasn't working. I've tried everything to fix it.It's a D-Link DWA-525 802.11n Wireless PCI netowrk adapter. On device manager it just says 802.11 Wireless LAN Card with a yellow exclamation next to it. And when I check what the error is, it's either error 31 or 52 at different times, depending what I've tried to do to fix it.I tried downloading the driver for it off the D-Link website, nothing happens at all when I install it. I tried taking it out of my computer and plugging it in. I tried enabling it and disabling it on device manager.I noticed one thing, when it's in my computer the green light at the back that says activity next to it isn't on.
View 10 Replies
View Related
Dec 3, 2012
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 rel 33996n
ISP : Verizon Fios
(My router says Version 1.9).Had this router about a month. It works fine. Using it in Wireless mode wpa2 security. Get excellent speeds. HOWEVER> It freqently drops connectivity and fails to allow wireless clients to connect at all. (You can see the SSID via wireless clients, but not connect to it). To restore it, I have to disconnect from Power, wait a moment, then reconnect to power. It recycles and connections are working again with no problems (UNTIL NEXT TIME). Seems to happen every few days.
I checked the web site and I appear to have the most current firmware.I have a Trendnet router on different channels in another part of the house which has never had this problem. I disconnected it to test if it was somehow involved, but the TP-Link router had same symptoms when it (trendnet) was not connected. Our Actiontec Router (VERIZON provides this as base connectin to them serving the Cable TV DVRs also) ) has its wireless disabled and is the DHCP server provider to the home network. DHCP is disabled on the TP Link.
View 14 Replies
View Related
Jun 22, 2011
Randomly my router stopped working in the middle of the night. I didn't think the issue was with the router so i called the Tech Support people from Brighthouse and they told me to connect directly to the modem so i did that and I had internet. But why would my router randomly stop working, I've had this Linksys Dual N bound router for a year and never had a problem with it. I want to think that its the internet providers fault but I guess I really don't know.
View 2 Replies
View Related
Apr 23, 2012
Once again I'm stuck to tethering on my phone due to my router deciding to call it quits for the random moment. I cannot access its control panel, the network just goes kaput. Given that I don't have access to the router since it's part of a double house (the side I'm not on of course), this is getting beyond irritating to reboot it when this happens as that is the only way to fix it. The connections are even wired, too. What kind of money does it take to get a router that is going to STAY on and just work? I'm ready to dump some serious cash into this at this point because this happens at least twice a week anymore. I just want a router that works. It needs to be wireless as my neighbor does use his kindle on it every once and a while.
View 4 Replies
View Related
Oct 11, 2012
Router randomly stops working and sometimes reconnects by it self and sometimes I have to manual reset the router. Also I only get 2-3 bars wireless. Is my router not configured properly or damaged?
View 2 Replies
View Related
Oct 5, 2011
I just bought the E4200 routher at best buy a few weeks ago. I got it all setup how I want it. Its been working fine then about a day ago it started to stop working at random. All internet just stops working. Wired and Wifi. I have to either wait for it to work again or restart the router.
View 7 Replies
View Related
Jan 9, 2011
For the past few months my router has been randomly disconnecting me and everyone who is connected to the router from the internet from anywhere between 10 seconds and 1 min and i can't seem to figure out what has been causing this. It can happen multiple times a day or it can go for a week without happening. it makes playing online games extremely annoying.
Hardware Version: A4
Firmware Version: 1.32NA
View 3 Replies
View Related
Mar 30, 2011
I just bought a dlink 655 from amazon and for some reason the router stops broadcasting on wifi. I cannot connect to it through my laptop or ps3. The only thing that fixes this is removing the plug from the back of it and putting it back in, once i do this, the SSID shows up once again and all is well until the next day (or 2 days after)
View 2 Replies
View Related
May 8, 2013
I have a webserver running and have port80 open to recieve requests. Every once in awhile the router randomly disables this port from being forwarded. It is only this port none of the other ports I have open are disabled. I tried switching the server to another port but had the same problem.I have assume its some kind of security feature, since the server gets many requrests that it shuts down the port?
View 1 Replies
View Related
Jul 27, 2011
It's been a pretty darn good router for about 8 months now, then today one of the wireless connected PC's started to go intermittent internet, and then dropped the connection.
At first I thought it was the PC, but after checking other connected items (wii, PS3, another pc, 2 ipods, and 2 printers) I discovered all the wireless connections were dropped, and no one could see the SSID. An hour unplugged fixes nothing. 2 wired ports are working fine though.
When it's uplugged and then plugged in, all the little lights come on, then go out, and then, only the 2 wired port lights come on, nothing else.
View 2 Replies
View Related
Feb 27, 2012
Basically I keep losing my internet on my laptop only randomly. It started with only skype working and no internet on the pc. Then it went to alot of crashes that led me to system restore. Then it came back again. Im not sure what i can do about it?
View 3 Replies
View Related
Nov 10, 2012
I have a windows vista pc networked to a second pc. I have wirelessly networked internet to 2 laptops. I have an actiontec wireless modem by verizon. All of a sudden my host pc started randomly losing internet connection, but the wireless laptops still have a signal. It seems like the host sometimes can't "see" the modem.Here are my settings while the internet is functioning.Microsoft Windows [Version 6.0.6001]Copyright (c) 2006 Microsoft Corporation. All rights reserved.[CODE]
View 11 Replies
View Related
Sep 3, 2012
I've been using an 802.11 b/g USB wireless network adapter card with my computer to use in conjunction with an AT&T 2Wire router,which is about 20 or 30 feet away off in another room.After about 10 minutes on average, the adapter will stop transferring data suddenly, and it will stay that way for a while. If I do nothing, then sometimes it will start up again after several more minutes, but instead of waiting, I usually will select "Repair" from the Wireless Network Connection pop-up menu, which also works to get it started again. The problem though, naturally, is that after another little while, like about 10 minutes again, it will short out all over again. Sometimes, very rarely, it will stay working for up to maybe an hour, and sometimes, it can short out yet again within a few seconds.
View 9 Replies
View Related
May 9, 2013
I have noticed a problem recently that our Remote Access VPN will randomly stop working. I will be able to connect and enter my Username+Password and it says Connected, but I cannot ping Remote Resources. If I check VPN Client Statistics, it shows Many Packets Sent/Encrypted, but None Received. It seems this problem affects all devices at once, but leaves the L2L tunnels intact.
It seems to randomly start working for a while, and everything seems fine until it stops working again. I verified that it is not a firewall problem, and it occurs on multiple ISPs and computers.
We also have 2 Static L2L Tunnels, and 1 Dynamic L2L Tunnel all of which operate flawlessly. All sites/remote users use split tunneling.
Below is the config, I just added the keepalives on the RA Tunnel to see if it would work, I haven't noticed any difference yet.
ASA Version 8.0(2)
!
hostname HQ-ASA5505
domain-name xxxxx.local
[Code]....
View 3 Replies
View Related
Aug 17, 2012
I am trying to figure out whats wrong with my parents apple airport router. Its connected into an Arris TM402P/110 cable modem. It randomly stops working, the network is there and shows up fine but you cant connect to it. It might work for a day or 2 and then just stops. I am trying to figure out if there is a configuration issue or the airport hardware is just failing. I am not sure where to start troubleshooting. The event log for the modem isnt much help, the following message shows up occasionally:
No Ranging Response received - T3 time-out
Whats interesting is my mom plugged her desktop right into the cable modem and then after plugging it back into the airport the wireless was working again. Is it possible there is a DHCP issue? If the hardware is failing what would be a good replacement for the airport?
View 2 Replies
View Related
May 16, 2012
i have an Asus u56e that I recently bought a couple of moths ago. It has been a great computer until today when my wireless randomly disappeared for no reason. The wireless adapter has been disabled for no reason, and when I try to re-enable it, I can't seem to find it.
View 1 Replies
View Related
Jan 24, 2011
I have a B1, FW 2.00NA. Everything works great, but once or twice a day, randomly the wifi signal will just dropout, I cant see it in my networks list, if I connect directly to my router the connection is fine. If I reset the router by cutting power wifi will start working again. Is there an beta firmware for the B1 I can try? Everything on the router is set to pretty much default.
View 2 Replies
View Related
Jun 23, 2012
I'm no good with computers, or anything like that; but this since about two days ago, my internet has been cutting in and out. One minute it will work fine, then a few minutes later it will disconnect, and then reconnect a few minutes later.I noticed that the globe symbol on my router either flashes when this occurs, or the power button turns orange. Why this is happening, and why it is happening all of a sudden ?
View 6 Replies
View Related
Nov 18, 2012
A few months ago, I swapped out my venerable D-Link DI-524 router for a newer DIR-655 that I'd had for a bit but had not been using as a router.
From a fresh reboot, everything will be fine. But after a while, where a "while" can be anywhere from a few hours to a few days, my internet connection will slow to the point that it's almost unusable. This applies to wired connections as well as wireless. At that point, I've found that a simple release/renew in the router's "Tools" menu will temporarily correct the issue, but then it bogs down again after the aforementioned "while". And whether I release/renew, or do a full reboot of the router, the cycle basically repeats. Sometimes I'll have to hard reboot it, because if I let the connection get too bad, it will get to a point where any browser will take a half hour just to load the router's page.
I'm pretty sure it's the router and not the ISP, because I hadn't had this issue with the DI-524; and after running a large overnight data transfer with a machine connected directly to the cable modem, Speedtest didn't show any slowdown (at that point, Speedtest will usually show a major slowdown when going through the router, even if the network doesn't "feel" sluggish).
Here's a rundown of my network setup and my current router configuration.Hardware version: B1, Firmware version: 2.03NA,My ISP is RoadRunner (Time Warner), which is a cable modem-based service.
I run an Amahi server that is directly wired to the router. I am running both a DHCP server and a DNS on that machine. As a consequence, I have "Enable DHCP Server" and "Enable DNS Relay" unchecked on the router's Setup->Network Settings page.
Connected directly to the DIR-655 are the Amahi server (Gigabit), a D-Link DGS-2208 switch, a TP-Link 100Mb switch, and a VOIP phone.
Connection Type: DHCP Client
Cable Status: Connected
Network Status: Established
StreamEngine: Disabled
Primary DNS Server: 192.168.0.5
Secondary DNS Server: 192.168.0.5
Advanced DNS: Disabled
View 14 Replies
View Related
Feb 19, 2013
My DIR655 is about a month old, works fine but randomly resets to factory default (loses configuration). Used it to get internet from an existing wired connection with gateway 192.168.0.1, therefore changed Network address of Dlink to 192.168.1.1 to make it work. Every so many days of working ok, it suddenly resets to factory default with no one touching the reset button. Have to restore the configuration from saved file which is a hassle.
Although the DIR655 is connected to a UPS, it shouldn't lose the settings during blackouts right?
View 1 Replies
View Related
May 12, 2011
I am using a D-Link DIR-655 REV B (Firmware: 2.00NA) wireless router. The problem I keep having is that the internet will randomly disconnect and it happens to all my computers. I am not sure if it is the router or the modem that is causing this. The internet service provider that I am using is Time Warner Cable and the modem is an ARRIS TM502G.I have tried resetting the modem and the internet seems to come back. Same thing happens if I try to reset the router instead of the modem. I have also tried restoring the router to factory default settings and that didn't seem to work.
View 11 Replies
View Related
